Sum For Multiple Criteria Range
Mar 28, 2014
=Sumproduct(sumifs(sumrange,criteria range1,criteria1,criteria range2,criteria2))
criteria 2 = can be a range.
if I want the criteria 1 also can be a range. isn't possible??
Eg(ok);
=sumproduct(sumifs($A$1:$A$100,$B$1:$B$100,D1,$C$1:$C$100,$E$1:$E$33))
Eg(how to let excel function tis)
=sumproduct(sumifs($A$1:$A$100,$B$1:$B$100,$D$1:$D$33,$C$1:$C$100,$E$1:$E$33)
View 1 Replies
ADVERTISEMENT
May 18, 2014
Macro for AverageIFS, with multiple criteria in the same criteria range....
View 9 Replies
View Related
Feb 9, 2014
I have saved this on a 2010 workbook as I am at home but this will be used on a 2003 workbook.
I have several projects on one spreadsheet which multiple users will be working and I am trying to create a summary sheet of the work carried out.
Each user is expected to carry out a task on each row of the data held in each worksheet (research, call, update etc) and each task (Option 1-5) is assigned a value. Each user is expected to meet a certain level of points per day to calculate productivity.
I am looking for a sumproduct along the lines of the summary sheet attached but mine just takes one sheet into consideration and I need one for all sheets.
View 12 Replies
View Related
Oct 10, 2007
I am trying to do a sumif function where it only sums when a different criteria is met in several different columns.
eg
sumif b:b shows portsmouth d:d shows calais f:f shows night then sum range g:g
View 9 Replies
View Related
Mar 6, 2008
I need to add all cells within multiple ranges where the characters "A", "S" and "D" occur.
=SUMPRODUCT(COUNTIF(INDIRECT({"C22:C25","C28:C32"}),{"A","S","D"}))
View 9 Replies
View Related
May 17, 2012
I have two ranges of data and want to count the unique number of times the values in column A occur if they have two values in column B. For Example:
ColA ColB
333310143333306344441014444430635555161246666101466661612466663063
I want to count the number of times value in ColA has the value 1014 AND 3063. My intention is to create a table that cross references the two
10143063161241014331306333116124112
I searched and found answers where multi criteria were in multi columns but I can't seem to find a solution to this means of find the unique count in ColA.
View 3 Replies
View Related
Aug 19, 2012
The part in green will count the number of entries for the name Johnson & Freedman LLC perfectly fine. However when i add the last part in red i receive a #Value! error.
Col. W is formatted as General and has a data validation for the user only to choose Pass or Fail.
Not sure why it isn't working.
Code:
=SUMPRODUCT(--( 'SCRA'!B26:B29>=Sheet3!C2),--('SCRA'!B26:B29
View 8 Replies
View Related
Nov 10, 2013
I'm working on a formula for calculating shipment weight per city it goes to per weight scale of the shipment pricelist. Although we have 4 customers with customer codes which we ship with our own trucks and some customers pick up there goods.
Therefore, my sumifs formula currently looks like this:
=SUM(SUMIFS('Freight SH 13'!$R$7:$R$14176,'Freight SH 13'!$R$7:$R$14176,"
View 1 Replies
View Related
Oct 20, 2006
I posted this on Mr Excel, but did not get an answer. I hope someone here can help.
I have a rather large financial worksheet that I am trying to extract some specific data from.
The sheet contains budget and expense #'s for the fiscal year for several projects. The project names are listed in column G and the same project can be on multiple lines, depending on what the expense is. Column J contains either "Cap" for Capital, or "Exp" for Expense. The monthly data starts at Row L. Each month has 6 columns, the one that matters for this scenereo is the 5th one for each month, which is the Forecast Column.
Our Fiscal Year is April 1 - March 31, but this sheet ruins from March - March so that we can carry over anything from the previous year. So the forecast column for March is column "P", April is column "V" and so on, adding 6 columns for each month.......
With me so far?
What I am trying to do is get the total forecasted expenses amount for a specific project for the remainder of the fiscal year.
In other words I need to look for a specific Project Code in Row G, look for "Exp" in Row J, Then get only the numbers that are in the Forecasted Column for months in the future and add them all up.
Just in case that is not totaly clear----
criteria to meet
Column G = "Project Code"
Column J = "Exp"
Row 2 > this month
Row 3 = Forecast.......................
View 9 Replies
View Related
Dec 30, 2008
I am trying to create a formula that will lookup multiple criteria within a table, one of those criteria being a date that falls within a certain date range. The purpose of the data is for billing tenants and owners in a building. I have successfully been able to use Index Match to lookup 2 criteria, one of them being a specific date match (see my attachment). However, I need to add a third criteria looks up the date that falls between a specific date range. The concept is to run a query where I enter a Unit (apartment) number into one cell, a Billing Date into another cell and the Type (Owner or Tenant) into a third cell to determine the Name of the person who fits these criteria... Criteria A Lives in Apt XX, Criteria B Who's lease start date and end date is inclusive of the Billing Date that I entered and Criteria C who matches the Type of customer, either Owner or Tenant.
View 9 Replies
View Related
Oct 12, 2012
I'm trying to create a formula that will lookup multiple criteria within a table, however the problem I am having is that one of the criteria needs to fall within a certain a date range. I've used index & match to look up the dates when they match exactly, but how to return the same value for when they fall within a date.
I have attached the spreadsheet - Date Range.xlsx! The requirement is to get the correct "pay" from the "Contingent Workers" sheet to the Timesheet sheet. So it will match the Employee ID, but also the date on the Timesheet tab will fall between/or be the exact date indicated on the contingent workers tab.
View 3 Replies
View Related
Jan 1, 2014
How to use countif in Excel 2003, for multiple range and criteria ? Can 'Nested ifs' be used? If so, a sample of such ifs
View 3 Replies
View Related
Apr 30, 2009
I'm trying to figure out how to count by two criteria, only one of the criteria has a value among multiple values in a cell and the other is a range. I tried to use sum but it doesn't count the value and count doesn't recognize the range. I attached the file so you can see what we're trying to do.
View 4 Replies
View Related
May 29, 2013
I have the following table
Team>
Team A
Team A
[Code].....
I need to fill the following table in another sheet counting the amount of Blank cell there are according to Month, Team and if the name row is filled. I have tried Sumifs, sumproduct,countblank typing them in as arrays but don't seem to be getting anywhere
April
May
Team A
6
1
Team B
11
1
View 2 Replies
View Related
Dec 2, 2013
I know need to modify the formula to include validating if the indexed reference occurs within a certain month.
{=INDEX('Duration Calculations'!B$2:B$5000,SMALL(IF(MONTH('Duration Calculations'!$J$2:$J$5000=10),IF(ISNUMBER(SEARCH("br",'Duration Calculations'!$A$2:$A$5000)),ROW('Duration Calculations'!$J$2:$J$5000)-ROW('Duration Calculations'!$J$2)+1)),ROWS(P$100:P101)))}
Essentially, what I am trying to do is index the value from B column if it meets the following criteria
1) Date in column J is equal to any date that occurs in October
2) the Column A has a text value equal to "br"
If both true then I need to index the value in column B.
The formula as states works finding any value equal to "br" but seems to be ignoring the date range.
View 1 Replies
View Related
Dec 30, 2008
I am trying to create a formula that will lookup multiple criteria within a table, one of those criteria being a date that falls within a certain date range. The purpose of the data is for billing tenants and owners in a building. I have successfully been able to use Index Match to lookup 2 criteria, one of them being a specific date match (see my attachment). However, I need to add a third criteria looks up the date that falls between a specific date range. The concept is to run a query where I enter a Unit (apartment) number into one cell, a Billing Date into another cell and the Type (Owner or Tenant) into a third cell to determine the Name of the person who fits these criteria... Criteria A Lives in Apt XX, Criteria B Who's lease start date and end date is inclusive of the Billing Date that I entered and Criteria C who matches the Type of customer, either Owner or Tenant. I have attached my sample spreadsheet.
View 7 Replies
View Related
Aug 27, 2012
I have a problem whereby I have a list of data that has a date, a transaction and a balance. I want to be able to rearrange this data into multiple tables, one for each month.
The pictures below explain the situation better, on the left is the list of data I need to sort, and on the right is how I'd like the data displayed. So for the May columns I would like to display all transactions that happened in May and, depending on whether it is an income or an expense, the amount in the corresponding column.
i.e. so the finish result looks something like this:
View 9 Replies
View Related
Oct 21, 2006
I am trying to solve a problem. I am currently using this formula
= SUMPRODUCT(--(Sheet2!B2:Sheet2!B300="MARKETING"),--(Sheet2!D2:Sheet2!D300="200612"),Sheet2!E2:Sheet2!E300)
This formula works for me as it is but I would like to add more months to 200612. I want this to also be 200701 and 200702. In another cell there will be up to 10 months. Is there a way to do a Vlookup or something that will look up these months in another table, rather than keep typing them out in the formula?? Otherwise my formula will be very long.
So the info looks like this in excel
MARKETING 200612 -10
MARKETING 200701 -25
MARKETING 200708 -50
ECONOMICS 200709 -30
The info goes on and on. The two variables are the MARKETING column and the month column. My problem is that I would like a seperate table that can be the months. So 200612 and 200701 is one table, and 200708 and 200709 is another table. The table changes often so I dont want to mess with the formulas, rather a table.
View 5 Replies
View Related
Mar 24, 2014
I've attached a sample workbook to show what I am trying to do. I would like the formula to say "if Sheet2!A:A is "MON" and if Sheet2!R:R matches Sheet3!A:A, and if Sheet2!I:I doesn't match any of the values from Sheet1L:L, then I'd like the sum of Sheet2!F:F. It seems pretty simple but I've tried a million different variations of SUMIFS, SUMIF, IF, AND, etc. and I can't figure it out.
View 1 Replies
View Related
Jul 30, 2008
I have a spreadsheet which lists letters issued, the date issued and the potcode. I need a formula that counts, on a weekly basis, the number of letters issued to postcodes in Sutton and Bexley.
I have a count sheet set up on one worksheet and the list of postcodes applicable to each area are listed on another worksheet. I have been playing around with sumif, sumproduct etc, but these don't seem to work as I am pointing the formula to a list of postcodes and not an individual postcode. For example, the formula for one week needs to tell me, the number of letters issed to Sutton between 26/07/08 - 01/08/08. This is what I tried -
=SUMPRODUCT(('MU63 NC'!$F$2:$F$10>=COUNT!B$2)*('MU63 NC'!$F$2:$F$10<=COUNT!B$3)*('MU63 NC'!$D$2:$D$10=Sutton!$A$2:$A$50))
But I get #N/A - if I change the last refernce to a specific cell instead of a range it works, but this will make the process very lengthy as there are lots of postcodes!
View 5 Replies
View Related
Mar 4, 2008
i m trying to use the sumproduct formula, and OR but i cannot seem to get this right! =Sumproduct(--(A1:A10="Yes"),--(OR(B1:B10="Yes",B1:B10="Mayby")),C1:C10)
I have also tried Array Formula as follows; {=SUM(IF(A1:A10="Yes",IF(OR(B1:B10="Yes",B1:B10="Mayby"),C1:C10)))}
I have also used UDF to for the sumproduct, but cannot make that work! keep giving me value message
Function
Function Customer(Service as Range, Outcome as String, Service2 as Range, Outcome2 as String)
Customer = Sumproduct(--(Service = Outcome),--(Service2 = Outcome2), Result)
-Didnt get thru this bit to start building on the Function! keep giving me #Value!
View 5 Replies
View Related
Mar 18, 2013
I maintain the data flow at my work. We send and receive the data using excel files with specific formatting that I then upload to the database. Each time I send or receive the excel file I must log them, this is what my code question refers to.
I use RDBMerge to merge all the contents of the 100 plus excel files into one worksheet. The first part of the macro cleans up the merge data for use in the log (i have attached an example of the clean data and finished log).
The blue shaded area of the "Raw_Data" is what the clean data looks like, the yellow column is what current macro records for each record.
As you can see by the example the Raw_Data is only two files LL_LLL_BOB_ToLLLLL_20121228_01 & LL_LLL_BOB_ToLLLLL_20121230_01, each with more that one record.
The log code in column "H" Is based on this criteria:
First Letter of the Unique ID in column "E" - O, M, or L
Program Type in Column "F" - U or R
1. O-U = U
2. O-R = RU
3. M-U = U2
4. M-R = R2U
5. L-R = R
You will note that Columns G-R of the "Log Sheet" correspond to the "Record Type" found in Column "G" of the "Raw_Data" sheet.
This is the area where my skill at using scripting dictionaries fails.
The results for the log list each file only once, but the log code for each corresponding "Record Type" in columns G-R of the "Log Sheet" must contain each unique instance of the code. In other words
if LL_LLL_BOB_ToLLLLL_20121228_01 contains an O-U with an "A" Record Type and an M-R with an "A" Record Type; then, on the log sheet there needs to be the codes "U/R2U" in the cell intersection of the LL_LLL_BOB_ToLLLLL_20121228_01 record row and "A" column (which is column "G")
So, If the File contains one of each code for each Record Type the corresponding cell must house one of each code separated by a "/" without any spaces. This means the cell value could no code, or one code and all the variations in between to all five codes. Also, for ease of human reading the log codes should be concatenated in the 1-5 order that I listed them in (U/RU/U2/R2U/R)
Here is my code so far.
VB:
Option Explicit
Sub test()
Dim dic As Object, a, i As Long, rng As Range, e, w, n As Long
Set dic = CreateObject("Scripting.Dictionary")
[Code].....
View 1 Replies
View Related
Aug 5, 2012
I am using MS Office 2010. I want to count---on multiple sheets---the number of times that a given cell is greater than another cell if and only if a third cell is equal to a given value. I want to do this for 4 sets of data on each sheet. I thought I had it figured out with this formula---
=SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$R1"),2*(AND("'"&$H$1:$H$43&"'!$E1">"'"&$H$1:$H$43&"'!$F1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$S1"),2*(AND("'"&$H$1:$H$43&"'!$G1">"'"&$H$1:$H$43&"'!$H1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$T1"),2*(AND("'"&$H$1:$H$43&"'!$I1">"'"&$H$1:$H$43&"'!$J1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$U1"),2*(AND("'"&$H$1:$H$43&"'!$K1">"'"&$H$1:$H$43&"'!$L1"))))
but it returns a value of zero each time. Clearly there is an error in the formula.
Here is some background:
-- $H$1:$H$43 is a block of cells that has the names of the sheets in the workbook
-- E1 and F1, G1 and H1, I1 and J1, K1 and L1 are the four groups of cells that I am comparing.
In the entire workbook, I want to add 1 (counting function) only when:
R1=2 AND E1>F1 or
S1=2 AND G1>H1 or
T1=2 AND I1>J1
U1=2 and K1>L1
on each appropriate sheet in the workbook.
View 1 Replies
View Related
Aug 31, 2012
I have a worksheet entitled 'Data'. In this worksheet there is a table consisting of 4 columns plus relevant data:
TABLE 1:
Project
Benefit Type
Delivered or Enabled
Benefit
PJ1
Financial
Delivered
Saving of $4M over 24 months.
[code]....
I have been trying to create a formula that will enable me to pull data from the 'benefit' column(column D) so that the cell contents populate in a single cell in a table in a different worksheet.
TABLE 2:
Financial - Delivered
Financial - Enabled
Tech - Delivered
Tech - Enabled
Green - Delivered
Green - Enabled
[code]....
So, as an example, I am hoping that a formula can be created which pulls the text from relevant cells in column D when criteria from columns A, B and C are met e.g. Tech benefits that are Delivered in PJ2 would populate cell E3 ('Tech -Enabled') in Table 2 with:
Continued maintenance of hardware.
Increased capacity.
View 1 Replies
View Related
Jun 29, 2014
I have a directory which contains many files, they are all names based on their locations. eg. Burwood-File1.xls,Burwood-File2.xls,Burwood-File3.xls etc
I have a master that which will contain the branch in the first column.
I have defined the directory location in a separate sheet as well as email template.
When I click on the Send Email button I want ti to attach the files that match the Branch name.
The Branch list will constantly grow.
View 2 Replies
View Related
Feb 24, 2014
Im struggling to find a formula to populate cells based on values to be checked in two fields (ICODE, COMPANY) as shown below.
In the example here, all records where ever the ICODE = 49, i need to populate the fields(columns) AD1,AD2,AD3 or AD4 with the product name of the same company where the ICODE <> 49. There could be between 1-7 products per company.
CURRENT SHEET
ICODE PRODUCT COMPANY AD1 AD2 AD3 AD4
89PENS ABC STATIONERY CO LLC [code]....
The attached example file may be a better alternative to view this problem.
View 2 Replies
View Related
Feb 1, 2012
Worksheet 1: In column A I have a people's initials. In coumn B I have text boxes with miscellaneous text. (The same person could have multiple rows within this sheet.)
e.g.
AAA blue
BBB orange
AAA round
CCC smelly
AAA elongated
Worksheet 2 I want to show:
A2 = initials, B2 = first text box associated with that person, C2 = second text box (different row) associated with that person (if applicable), D2 = third text box (different row) associated with that person (if applicable), etc.
e.g.
AAA blue round elongated
BBB orange
CCC smelly
View 3 Replies
View Related
Apr 28, 2012
I am having such a difficult time creating a macro that will reduce the 5+hours I have to spend each week manually copying & pasting all of this data. I making an IMMENSE difference in this worker bee's life!
I have a workbook with two sheets (Sheet1 & Sheet2). Sheet1 has license #'s in column A and the state that the license belongs to in column B like this:
COLUMN ACOLUMN B11111Alaska11112Alabama11113Arkansas11114Arkansas
Sheet2 has three columns. Column A has the license #'s, column B has the state that the license belongs to and Columns C shows a line-of-authority tied to that license #.
COLUMN ACOLUMN BCOLUMN
C11111AlaskaProperty11111AlaskaCasualty11112AlaskaLife11112AlaskaHealth11112
AlabamaProperty11112AlabamaCasualty11113ArkansasLife11113ArkansasHealth11114
ArkansasLife11114ArkansasHealth12345ArizonaProperty
I'm trying to write a macro that will compare the license # and state in Sheet1 to the license # and state in Sheet2. If it matches, append the contents of Column C to the corresponding row in Sheet1.
Here's the thing...Sheet2 contains the entries for all licenses in the company (so this table is HUGE). And there are multiple entries for each state license # (notice how there's two entries above for AK license # 11111 - one for the Property line and one for the Casualty line.
After my macro is run, I want Sheet1 to show all the lines-of-authority on a single line. So if I ran my macro on the above example, after it's run I would have this in Sheet1:
COLUMN ACOLUMN BCOLUMN
C11111AlaskaProperty Casualty11112AlabamaProperty Casualty11113
ArkansasLife Health11114ArkansasLife Health
View 5 Replies
View Related
May 28, 2014
I have a Excel 2010 workbook used to rota in a large amount of staff for a call centre, which is split into four teams. Each sheet corresponds to a month of the calendar year eg Jan201, Feb 2014 etc..
What im trying to do is put in a sheet at the front of the workbook that I can select the team, which populates the list of staff in that team and then checking across a specified date range gives the shifts that those respective staff will be working for the set time period (probably be looking at a seven day period and a 1 month period). (This in turn will be printed out to give to the staff members.)
View 2 Replies
View Related
Aug 10, 2009
I am trying to find a formula to count rows that meet multiple criteria, but one of the criteria can be multiple values. I have a list of people with a list of clients that they are responsible for. Each person is responsible for 10-20 clients. Every day I run a report that shows the project worksheets submitted for each client and if money has been awarded or not.
I'm wondering if there is a way to count, for each person, the number of project worksheets that show "awarded" in column K. That would mean that I would have to look for, for each person, any of their multiple clients in column B and "awarded" in column K.
I am trying to put the formula in D2:D9, as I use A2:D9 for a chart. O1:P79 contain the names of the people and the applicants that they are responsible for. A17:D158 contains the list of project worksheets (updated daily). I used =SUMPRODUCT(COUNTIF(B17:B999,P1:P14)) to count the actual number of project worksheets for each person, but I can't figure out a way to modify that to add in the "awarded" criteria also.
View 2 Replies
View Related