I have the following table
Team>
Team A
Team A
[Code].....
I need to fill the following table in another sheet counting the amount of Blank cell there are according to Month, Team and if the name row is filled. I have tried Sumifs, sumproduct,countblank typing them in as arrays but don't seem to be getting anywhere
April
May
Team A
6
1
Team B
11
1
I have saved this on a 2010 workbook as I am at home but this will be used on a 2003 workbook.
I have several projects on one spreadsheet which multiple users will be working and I am trying to create a summary sheet of the work carried out.
Each user is expected to carry out a task on each row of the data held in each worksheet (research, call, update etc) and each task (Option 1-5) is assigned a value. Each user is expected to meet a certain level of points per day to calculate productivity.
I am looking for a sumproduct along the lines of the summary sheet attached but mine just takes one sheet into consideration and I need one for all sheets.
Using formula rather than VB, I would like to calculate the number of blank cells that appear in a column BEFORE the first active cell but exclude any blank cells that appear after the first active cell. To elaborate, I have sheets that contain the days of each month and I need to exclude for other calculation purposes, the number of days (cells) where no entry of data has been input at the beginning of a month, NOT after the first data entry. ie. September has 30 days.
The first data entry is the 10th and there are no entries (thus far) after the 10th, the result that I seek, will be 20 (although only one cell has data), being the days left in the month AFTER the first entry. I have looked at COUNT functions but cannot find an solution. Perhaps it's not possible using basic formula?
I am using MS Office 2010. I want to count---on multiple sheets---the number of times that a given cell is greater than another cell if and only if a third cell is equal to a given value. I want to do this for 4 sets of data on each sheet. I thought I had it figured out with this formula---
=SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$R1"),2*(AND("'"&$H$1:$H$43&"'!$E1">"'"&$H$1:$H$43&"'!$F1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$S1"),2*(AND("'"&$H$1:$H$43&"'!$G1">"'"&$H$1:$H$43&"'!$H1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$T1"),2*(AND("'"&$H$1:$H$43&"'!$I1">"'"&$H$1:$H$43&"'!$J1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$U1"),2*(AND("'"&$H$1:$H$43&"'!$K1">"'"&$H$1:$H$43&"'!$L1"))))
but it returns a value of zero each time. Clearly there is an error in the formula.
Here is some background:
-- $H$1:$H$43 is a block of cells that has the names of the sheets in the workbook
-- E1 and F1, G1 and H1, I1 and J1, K1 and L1 are the four groups of cells that I am comparing.
In the entire workbook, I want to add 1 (counting function) only when:
R1=2 AND E1>F1 or
S1=2 AND G1>H1 or
T1=2 AND I1>J1
U1=2 and K1>L1
on each appropriate sheet in the workbook.
Column A contains "Power","Instr","EHT", Column AJ contains "25M32", "25M35","25M39"and the a date is in column AE. I need to count how many time the date appears in AE if column the cell in A is "Power" and the cell in AJ is "25M32".
View 2 Replies View RelatedIn the attachment at the bottom of the page I want to count the symbols in the blue selected area when they are apear into the cells in the red selected area. The catch is that I want to treat the each of the "RED", "BLUE", "GREEN" as a single colum so to speak and have a value "1" or "0" apear in the back circled area.
Eg, For MrB there is nothing in the "RED" column (B7:D7) so that gives a value of zero in cell cell "P7". In the "BLUE" column (E7:G7) there is a circle which will give a value of "1" in cell "Q7". In the "GREEN" column (H7:I7) there is a double circle and a square symbol and that will return a value of "1".
I hope this makes sense. I have tried to do this with counta, but that will also count cells when a space bar is used and that makes it difficult to make sure that I am getting the right info. I also tried VLOOKUP and COUTIF but this is beyond my level.
I have trouble with calculating standard error with multiple criteria. Below is the formula I used:
=STDEV(IF($J$2:$J$25="A",IF($K$2:$K$25="B",IF($L$2:$L$25=1,M2:M25))))/SQRT(COUNTIFS($J$2:$J$25,"A",$K$2:$K$25,"B",$L$2:$L$25,1,M2:M25,""))
The problem is the blank cells in the range that I am calculating (M2:M25). Everything is alright if there were no blank cells in M2:M25. If there were any blank cells, however, the STDEV was wrong (the countifs part was correct). It treated the blank cells as zero.
find the attached excel 2010 file <Count LBP or UBP.xlsx>.
My requirement is if `LBO' is available (in Column A) then the formula should count the number of `LBP' available above the `LBO' upto the blank cell. If there is no `LBP' above the `LBO' then it should plot zero in Correponding Column B Cell. If 2 `LBP's available above the `LBO' upto balnk space it should plot `2' in Correponding Column B Cell.
As like `LBO' and `LBP' the formula should work for `UBO' & `UBP'. refer the attached excel file.
I have attached a spreadsheet with some tele numbers. What i need to do is to find out which column only has 1 telephone number, eg. only a cellphone number, etc. I have aboout 50 000 records that i need to check if only 1 telephone number is available. Can i use the countblank function?
View 2 Replies View RelatedI am trying to write a formula for the following can anyone help please?
I have column D with blank cells and some with purchase order numbers in them. I want to count the blank cells in column D but only if the blank is 3days older than the date recorded in column A. Once I have done this I want to count ther same on every work sheet and I have 24 off them and get one answer.
This will tell us all the outstanding purchase order older than 3days
I have common tasks where I need to sort through large amounts of data to receive a total number of line entries matching multiple criteria in different columns. I've attached a Workbook with a simplified example. On STATS!B1 I would like to total, from DATA!, all lines which have "1A" in A:A and any of the following in E:E (RP, SAO, AE, RSNR).
View 4 Replies View RelatedI am trying to count the total number of oil rigs which have revenue in column H (postive or negative revenue, just not zero), revenue in column L, and have the owner name "Transocean" in column B. I'm trying to use this SUMPRODUCT formula but it's not working.
=SUMPRODUCT(--('Golden Source'!H2:H6280),--('Golden Source'!L2:L6280),--('Golden Source'!B2:B628="Transocean"))
I have a Colom with dates, some cell are coloured and others not, some of the non-coloured cells have dates and some not. I would like to count ONLY the non-coloured cells without dates in them.
View 6 Replies View RelatedI am trying to put together a table from which I'll attach a chart showing-at a glance-where open complaints are in our process:
are they open, closed, waiting for samples, waiting for QC, QC'd pending admin approval, etc.
my log consists of a lot of columns which track various pertinant info about each complaint. Such as A-complaint ID, B-date opened, C-date closed, K-initial QC investigation, L-final QC, M-admin status (pending/approved/denighed), N-notes (boiler plate notes like "pending ra samples" or "closed").
I used this formula alot in my various analyses =SUMPRODUCT(--(YEAR(Log!open)=$O74),--('ComplaintLog (101408).xls'!iqc="pending")) without issue.
Until now. I want to search multiple criteria starting with the year (2009, in this case) and whether or not the issue is closed (date in column C). Only need a count.
How do I append the sumproduct formula? I've looked at isblank but get crazy results from #value to #name to 340 (I only have 292).
PeriodWeek #DayDateNotes11Thursday29-DecBB vaca11Friday30-DecBB vaca
Tab1
PeriodWeek #DayDateNotes11Thursday29-DecBB vaca11Friday30-DecBB vaca
Tab 2
I have the column E in excel labeled 'Notes' in tab 1 adding at the bottom of the column using(=COUNTA(E2:E29), so if the cell is empty it doesnt add it up in the totals. In tab two i have that same column linked via formula. In tab 2 its counting the empty cells because even though they appear blank they have a formulas in them how do i get it to not count those cells. here is the formula im using in column E tab 2.
=IF('tab1'!E2="","",'tab2'!E2)
I have a spreadsheet that is used to capture information about Service Requests that my team handles in a 6 month period. At the end of January, the metrics for January will be added and the metrics for July will "fall off".
I need to be able to calculate the number of requests that were still active for each month. The formula I have created for this is below:
=COUNTIFS(Table1[Date Submitted],"Month Beginning of the First Month Being Reported", Table1[Date Closed], ">A Day Before Current Month Closing")
So, if my reporting period was July 2012 to December 2012, my formula for December would look like:
=COUNTIFS(Table1[Date Submitted],"7/1/2012", Table1[Date Closed], ">1/6/2013")
This accounts for anything that was opened in the months that was not closed before the month closing of the current month being reported.
I have two issues that I'm having with this formula:
1. The formula does not take into account the Service Requests that do not have a date in the "Date Closed" columns. Is there a way I can also count the items that have a blank "Date Closed"?
2. This formula will have to be changed every time a month "falls off". For example, when the reporting period changes from July to December to August to January, the formula for December will change to:
=COUNTIFS(Table1[Date Submitted],"8/5/2012", Table1[Date Closed], ">1/6/2013")
Is there a way I can have it change automatically without me having to do it manually?
I'm trying to to create a formula where if two different cells have no value (K10 & O10) a third cell will also be blank (N10)
I have the following formula which follows these steps when i evaluate it.
=VLOOKUP(K10&O10,$J$77:$K$98,2,0)
=VLOOKUP(" "&O10,$J$77:$K$98,2,0)
=VLOOKUP(" "&" ",$J$77:$K$98,2,0)
=VLOOKUP(" "$J$77:$K$98,2,0)
#N/A
How can i deliver a blank cell as the answer?
In column A, it contains the monthly salary data of each employee, then in column B, it contains the classification level data, Like Grade A, Grade B and Grade C. In this exercise, it want to find out the statistic as follows:
1. How many employee's monthly salary is below 10K and their classification level is Grade A, B or C
2. How many employee's monthly salary is above 10K and their classification level is Grade A, B or C
So any formulars can do that in instead of using the sorting method?
see attached doc. The graph is showing the overall % from the table above. However months april-december are blank although they have a formula in them. This is causing the graph to show thes months as 0%.
View 2 Replies View RelatedI have a simple date formula that I want to present "yes" in a cell when another cells date is less then or equal to "Today". I just can't figure out how to make it show my result cell as blank if my date cell is blank?
here is my formula....
=IF(G8 <= TODAY(), "YES", "")
I have a formula counting non blank cells in another sheet 'Mem' I know there are 21 entries in Column M, which it used to show as the result. Today it shows 0. The 21 entries are still there.
Code:
=COUNTA(Mem!$M:M)
The cell containing the formula is B6. The bottom bar of Excel has: Ready Circular:B6
I want to count the number of cells in column A that are not blank MINUS or EXCLUDING the cells in Column AD whose values are "Closed".
View 9 Replies View Relatedwhy it is counting every blank cell as 1. I have tried to copy my data as paste as special value and run pivot again but I get the same result. For you visual consideration, I've attached a sample spreadsheet.
View 6 Replies View RelatedI am looking to count the unique amount of customers who are listed in column C based on the criteria that they purchased the product on the 1/08/2014 and that the product came from Department 3. The output I am looking for in this example would be 3. I can do it for this example but when I have 300 different customers it starts getting tricky and I'm a bit stumped on how to incorporate an array formula into a countifs() function or whether there is an alternative.
Date DepartmentCustomer
1/08/2014 3 A
1/08/2014 3 B
1/08/2014 2 C
1/08/2014 3 D
4/08/2014 3 A
5/08/2014 2 A
5/08/2014 3 D
Fixed data labels over a number of columns and i want to count the number of times 2 of these appear however when ive tried to use the countifs function it will only count if in the first colum of the range selected and for example if A2 says 'FRANCE' and D1 'RED'
Ie i have been using COUNTIFS('Datasheet'!BB:BE,A1,'datasheet'!BE:BH,D1)
I'm trying to get a count of unique values in column B when criteria matches for columns A,C and D. The worksheet I'm trying to complete looks like this:
2366 2005 T [number of corresponding unique values of B]
For example:
--D---C---A-B
2366 2005 T 2
(as opposed to 3)
A
B
C D
T
655 2005 2366 T
656 2005 2366 T
656 2005 2366 W
659 2005 2367 W
659 2008 2369 W
659 2006 2370 F
659 2005 2370 W
660 2005 2370 W
660 2008 2371 W
660 2006 2371 T
660 2005 2371 W
661 2005 2372 W
661 2007 2372
I have a sheet with "Yes", "No', and "N/A' in most of the Columns. (E - Q) and about 100 rows of data.
I only want to count the number of rows that have "No" in column E and Yes in all the others. If "no" occurs in any of the other columns in that row (D-Q) I dont want it to be part of the count.
I'm trying to get a count of unique values in column B when criteria matches for columns A,C and D. The worksheet I'm trying to complete looks like this:
2366 2005 T [number of corresponding unique values of B]
For example:
--D---C---A-B
2366 2005 T 2
(as opposed to 3)
A
B
C D
T
655 2005 2366 T
656 2005 2366 T
656 2005 2366 W
659 2005 2367 W
659 2008 2369 W
659 2006 2370 F
659 2005 2370 W
660 2005 2370 W
660 2008 2371 W
660 2006 2371 T
660 2005 2371 W
661 2005 2372 W
661 2007 2372
I have a large sheet (several thousand rows and growing) - see a small cut of the data. The columns following on from this have a list of people's names, hence why a lot of the data repeats (as a number of people attended each program).
Program
Clinic Title
Start Date
[Code].....
formula that will automatically give me that answer?
I have a row that contains a different time (hh:mm) in each column where each column represents a different date which is display in row 3. If there is no time the cell is populated with "N/A"
I want to count how many cells for a specified Month/year are not equal to "N/A". I have been able get each selction criteria to work but when I try merging numeric and non-numeric queries I lose it.
The following formula was able to give me the count of cells "N/A"
=COUNTIF('Master Data'!$UA59:$ALZ59, ">0")
and this gave me a count by Month/Year
=SUMPRODUCT(--(YEAR('Master Data'!$UA3:$ALZ3)=2012),--(MONTH('Master Data'!$UA3:$ALZ3)=1))
When I tried creating one COUNTIF I was unable to get it without an error as I needed the YEAR/MONTH functions.