Macro Recording Fault
Jul 7, 2006
This problem occurs in EXCEL 2000/2002/2003. I open a CSV file generated by perform.exe and convert the information using Data/TextToCollumns - Delimited/Colon and Finish. When i execute these steps in Excel i don´t have problem, but when repeat these steps after recording a macro (Tools/Macro/Recording Macro) occurs this problem.
After a click finish option, i receveid this message
"Numero excessivo de continuações de linhas" (Portuguese message)
"Excessive Continuation lines" ( translate to English )
and recording macro stop. I don´t know what happen. I attach a ZIP file with a CSV file to test and analysis.
View 2 Replies
ADVERTISEMENT
May 17, 2013
I have a large excel spreadsheet which looks at a number of test results for students in school. The worksheet being prepared by marcos to display different class results dependent on the teacher select so they can view their class data. The sheet works fine and does all I need but have a fault with the transfer of test results which contain zeros. These are transfered with the zero missing even if the zero is in the middle of the number eg 203. The display if zeros is not suppressed and I have no format to suppress zeros but also understand these commands on suppress empty cells containing just zero.
This code will bring up the fault shown above and will loose zeros so 10 on source sheet becomes 1 and 102 becomes 12
VB : =IFERROR(SUBSTITUTE((VLOOKUP($A11,INDIRECT($H$14),550,False)),"0",""),"")
I wondered if the SUBSTITUTE command is causeing issues but cannot remember quite what this command does - may have copied from elsewhere and not fully understood it.
The following code is used elsewhere on the same worksheet to display the same test result but in a individual pupil format rather than as a class sheet.
VB : =IFERROR(VLOOKUP($C$7,INDIRECT($H$14),888,False),"")
This picks up the same result but does not suppress the zeros. It cannot be used to do the job of the upper code as it reads from the original source where as the upper line of code reads from a central point which does not change so the data from 6 different areas is copied into this area.
These are not part of macros just in a cell. The cells are not formatted and then right click format cell is just "general".
Needless to say I need to know what I have done wrong to get the test result to be displayed incorrectly so I can correct it to get the sheet right.
View 1 Replies
View Related
Feb 18, 2007
I recently installed Excel 2007, and have shared others' joy in searching for things on the ribbon. I tried to record a macro to insert an autoshape. Excel creates the macro, but drawing the autoshape is not recorded. I'm sure I'm missing something obvious ...
View 7 Replies
View Related
Jul 18, 2009
when i recored Macro i try to select cell A1 and write in It Yahya the Code Come Like this one ...
View 9 Replies
View Related
Aug 29, 2009
I have a spread sheet in excel that I enter a date(a1) the supplier(b1) product ordered (d1) and an order number(g1) when I record a macro to copy theses cells in to a sheet called a purchase order sheet (i.e. A1,B1,D1,G1) the macro runs and prints off the order sheet how do I get the macro to run when I fill in line (A2 etc) when I enter a new order.
View 9 Replies
View Related
May 15, 2007
I frequently use the record option to start off my macros. I realize this usually results in recorded events which are not absolutely necessary (recording a print macro is one that is full of excess line items). I then try and combine what I have recorded with what I have garnered from this wonderful website. If my spreadsheets are small - and I am not writing code to pass any inspections - is there a need to go back and clean up?
View 2 Replies
View Related
Oct 21, 2009
The code contain using Autofilter to some columns, & then copy paste to another sheet to first blank row, & sorting it by asscending in Column A.
Both sheets are in the same workbook.
But for some reason, the Macro will giving the result expected if i run it step by step (by using F8 button under window VB editor). And if i call the Macro name it stoped in the middle of the process.
View 7 Replies
View Related
Feb 20, 2012
I incorporated more codes to the ones that were just solved from this board, but how can I make the active cell stay on A1 of sheet "hypo_tax_dropdown"? Also, I obtained the codes for removing the duplicates from macro recording, will these codes work on any machine? I noticed that it doesn't have worksheet.function
Sub Macro1()
Dim X As Long
Sheets("Hypo_tax").Select
[Code].....
View 7 Replies
View Related
Sep 26, 2013
I am having trouble with a project for school. The instructions are: (In Worksheet 1) Type Your Name. Now, begin recording a Macro. Copy and Paste your name from Worksheet 1 to Worksheet 2. Fill in the background and edit the font. End.
Here is an example of the coding.
ActiveCell.Range("A1:E1").Select
Selection.Copy
ActiveSheet.Paste
Application.CutCopyMode = False
With Selection.Interior
.Pattern = xlSolid
.PatternColorIndex = xlAutomatic
[Code] .....
Now, according to the instructions I should be able to run the Macro in any worksheet....but anytime I run the Macro in any other worksheet I just get a yellow block without my name there.
View 4 Replies
View Related
Nov 17, 2006
I'm recording a Macro but I want to test certain section before I complete it, so can I pause the recording and then restart the recording again?
View 9 Replies
View Related
Jun 28, 2007
When I try to record macro, the small toolbar which has two buttons "stop recording" and "relative reference" do not appear. I need to turn relative reference on.
Can you please guide me how can I make it visible to turn relative reference on?
View 9 Replies
View Related
May 12, 2007
I'm trying to create a macro using Tools/Macro/ Record a New Macro. I need to record in the relative mode, but I cannot find the Relative/Absolute button. I have gone to Tools/Macro/Stop Recording but it only allows me to stop recording. I am on excel 2002
View 3 Replies
View Related
Feb 11, 2014
Fixing a macro that i recorded in order to generate a pivot table on the same sheet and the same exact location every time. it seems that the macro fails every time i try to run and i'm thinking it has to do with the table reference. Again i want the table in the same sheet and the same location every time i run the macro. this is the recorded code so far.
View 1 Replies
View Related
Jan 18, 2007
I am working on this project that involves opening several Excel spreadsheets and copying the data into a new workbook. The problem is that the names of the various worksheets I want to copy change every day - it always reflects the date. I open 7 workbooks, go to the sheet named (for example)01.17.07, copy a static range and then paste it to a new workbook.
Is it possible to record a macro and use a cell reference in the destination workbook (the one I want to copy to) to tell it which worksheet to copy? So, for example, I would type 01.17.07 in cell A1 of the new workbook and the macro would look for the sheet named 01.17.07 when running? Then tomorrow, I could type 01.18.07 and it would know to look for a different sheet?
View 11 Replies
View Related
Oct 13, 2008
How can I make XL (2000) display the macro start/stop recording and relative/absolute box that used to appear whenever I started recording a macro?
Such an apparently simple issue, but I can't resolve it!
Somehow I lost this small box, and I know how to force it to display via customize, but it doesn’t seem to work the same (relative does not work as such) and the buttons or box disappear.
View 2 Replies
View Related
Oct 29, 2013
I'm trying to record a macro that is using vlookups to get data from another data sheet, this data sheet will update each month - the old data moving back a column (so the new data is filled into the same column each time).
However, on the sheet where i am recording the macro, i need the data to fill in the next column each time.
I have recorded the below:
Sub Colourants()
'
' Colourants Macro
'
'
ActiveWindow.SmallScroll Down:=-30
Range("AK3").Select
[Code] .......
How do I get it so it doesn't record in cell 'AK' all the time but the next empty column each time it's run (however, it will always run from row 3).
View 1 Replies
View Related
Nov 2, 2007
I would like to be able to record keystrokes in a macro that mimicks the keystrokes, not the contents of the cells.
Like this:
I select a random cell, start the macro, and the macro should: ....
View 9 Replies
View Related
Aug 5, 2013
I'm trying to record a macro that calls up the saveas dialogue and uses a filename from a cell (it's the w/c date). I can start recording the macro, open the dialogue box and copy the contents of the cell but i can't get it to paste as the filname.
What I'm trying to achieve is to allow users of a muli-sheet workbook to be able to click on a 'save' button on any sheet and have the workbook save with a filename which includes the current week commencing date. This way all the weeks changes will be in just one file and from the following monday a new file will be started the the old one left alone as an archive.
View 9 Replies
View Related
Sep 4, 2007
I've created VBA code in Access 2007 to create a column chart in Excel, and it is working. I need to change the rotation on my category labels to 270 degrees vertical. When I record a macro on the chart in Excel 2007. I only receive the following
Sub chartingRotation()
'
' chartingRotation Macro
'
'
ActiveSheet.ChartObjects("Chart 1").Activate
ActiveChart.Axes(xlCategory).Select
ActiveSheet.ChartObjects("Chart 1").Activate
End Sub
How can I get the macro recorder to record changes to chart properties?
View 4 Replies
View Related
Apr 6, 2013
I have a workbook with numerous macros in it and they are assigned to buttons in the different worksheets. I am trying to record a new macro and when I start recording and click on one of the other macros nothing happens. This wasn't a problem in excel 2003.
View 2 Replies
View Related
Dec 20, 2007
I have a macro that is designed to paste a row of formulas into each Subtotal line on a 30,000+ line spreadsheet. I have specified the formulas that I want to paste in the named range "formulas". The macro below worked fine for about 3000 lines, then threw the error Run-Time Error 1004: Paste Method of Worksheet Class Failed on teh line ActiveSheet.Paste. I thought it had just bogged down my computer, so I added teh ScreenUpdating and Calculation lines, but they made no difference. I also tried reducing the range to just a couple thousand lines, which also made no difference. I also have found some suggestions on this forum and others for this error.
In addition to it working fine for 3000 lines, then failing, there are a couple other weird things. One is that on the line in the spreadsheet that threw the error, the formulas were pasted in up to column AX, leaving columns AY through CR blank. The second odd thing is that this exact same macro still works on my sample data spreadsheet (which only has around 50 records).
Sub FormatTotalRows()
Dim rCell As Range
Application.ScreenUpdating = False
Application.Calculation = xlCalculationManual
Workbooks("latest.xls").Activate
Range("formulas").Select
Selection.Copy
For Each rCell In Range("A3040:A5000")
If Len(rCell) > 0 Then
rCell.Activate
ActiveCell.Offset(0, 2).Select
ActiveSheet.Paste
End If
Next
Application.Calculation = xlCalculationAutomatic
Application.ScreenUpdating = True
End Sub
View 2 Replies
View Related
Oct 18, 2009
I have a function, that one of the members in this forum wrote. that changes the title of a chart according to the text that is written in a specific cell. I added this code to a module: ...
View 12 Replies
View Related
Feb 5, 2007
cell A3 contains a drop down list of student names.
say, William is the 1st student listed on cell A1.
when William is selected his math grade shows up on cell B3 & his English grade on cell C3
I figured out how to make cells B3 & C3 change according to selected student from cell A3. All data comes from the Database Table, which is locked/unedittable.
Here is how my sheet looks like ....
View 14 Replies
View Related
May 8, 2009
Is there a way to copy/transfer a cell value to an adjacent cell when the value of the cell changes. So if A1= 5, and it changes to 3, have B2 = 5 when this happens.
View 14 Replies
View Related
Feb 13, 2010
Some of the below address was removed, how would this formula be written in VBA? When I try to record this formula excel tells me unable to record, probably due to all the & within the address itself ...
View 9 Replies
View Related
Oct 31, 2013
I have an excel file emailed to me everyday. It is a daily tracking of our fleet and I manipulate it before printing it and giving it to management. I dont know why when I try to record the macro and then use it it hides all columns.
The report has columns A-N. I hide B, F-G, I, M-N. When recording I hide multiple columns across.
I have done similar macros with other reports, no problem.
View 5 Replies
View Related
Jan 30, 2009
how can i record a cell's value on a different tab every x seconds?
the value is updated every y seconds and i would like a list in column A of the cell's changing values.
every refresh may produce the same value.
View 9 Replies
View Related
Feb 23, 2003
I have a DDE-based worksheet, that is obtaining data from Townsend Analytics' RealTick Server software. One of my cells is a DDE formula that retrieves the current BID ask price, for a given stock.
When a new BID price comes in to my designated cell, I need to somehow capture the existing BID price, before this new one updates in the requisite cell. I want to be able to store this "old" value in another cell.
Unfortunately, there is no "pre-cell" event trapping. I've tried to work with the worksheet_change event, which passes an argument of the effected cells, but the cell value has already changed, by the time this event has been called.
This problem sounds simple, but I am at a loss for a solution. Does anybody out there in EXCEL-land have a solution ?
View 9 Replies
View Related
Mar 14, 2007
On my spreadsheet I want to move a column at the start of the day (as one column is todays values, the one previous is yesterdays). I have tried the following but it doesnt like it:-
Sub RQV()
Dim warn As Integer
warn = MsgBox("Do you wish to move RQV data to yesterday?", vbYesNoCancel)
Sheet1. Unprotect
Range("F2:F65536").Select
Selection.Cut
Range("E2").Select
Selection.PasteSpecial Paste:=xlPasteValues, Operation:=xlNone, SkipBlanks _
:=False, Transpose:=False
Sheet1.Protect
End Sub
It comes out with a run time error 1004? It needs to be a paste special as I just want the values put in. I have tried recording a macro to see how the vba code works, but it doesnt give me the option to paste special for some reason and I presume this is why the error occurs.
View 9 Replies
View Related
Sep 22, 2012
Say i wanted to track the changes in a cell, i.e. if a number changes in a cell it records the new number in a new column. The following macro achieves this for one value; say type a value in a15, it records the number changes in column D;
Private Sub Worksheet_Change(ByVal Target As Range)
Dim DestCell As Range
With Target
If .Cells.Count > 1 Then Exit Sub
If Intersect(.Cells, Me.Range("a15")) Is Nothing Then Exit Sub
If IsEmpty(.Value) Then Exit Sub
If IsError(.Value) Then Exit Sub
[code]...
But what if need to track the value of 4 cell changes in different columns, and record these values into different colums of their own? So for example, if i had a value in a1, and wanted to paste the changes into D; if i had a value in a2, and wanted to paste the changes into E; if i had a value in b7, and wanted to paste/record the changes into F etc etc.
I thought about running the macro for each cell but it wont work, for example i tried;
Private Sub Worksheet_Change(ByVal Target As Range)
Dim DestCell As Range
With Target
If .Cells.Count > 1 Then Exit Sub
If Intersect(.Cells, Me.Range("a1")) Is Nothing Then Exit Sub
If IsEmpty(.Value) Then Exit Sub
If IsError(.Value) Then Exit Sub
[code]...
View 6 Replies
View Related