The code contain using Autofilter to some columns, & then copy paste to another sheet to first blank row, & sorting it by asscending in Column A.
Both sheets are in the same workbook.
But for some reason, the Macro will giving the result expected if i run it step by step (by using F8 button under window VB editor). And if i call the Macro name it stoped in the middle of the process.
I have to create autofilters dynamically on x columns based on the selection I make. I created this code but is not working.
LastColumn = Cells. Find(What:="*", After:=[A1], _
SearchOrder:=xlByColumns, _
SearchDirection:=xlPrevious).Column
Range(Cells(17, 1), Cells(17, LastColumn)).Select
With Selection
.AutoFilter = True
End With
In A2 is the Stock price, and B2 the time of the update.Now every time it updates A2 and B2 get overwritten.I need some code that will save/ record the the stock price on the hour, every hour. I then need the highest and the lowest price within that hour, and lastly the price at the very end of that hour. (example)
A.........B.................C.........D.........E...........F..........G
stock...time.............time......open....high.......low.......Close
.60......16:45:33......14:00....40........90.........30........60
............................15:00....65........78.........65........62
............................16:00....62........72.........58........58
I received what I think may work, but I dont know how to write this in VBA. If the time of the new value received > than B2 + 1 second, create new row where Open=High=Low=Close else if (last column=new value,if new value>high column then high column=new value,if new value<low coulmn then low column=new value.)
I recently installed Excel 2007, and have shared others' joy in searching for things on the ribbon. I tried to record a macro to insert an autoshape. Excel creates the macro, but drawing the autoshape is not recorded. I'm sure I'm missing something obvious ...
View 7 Replies View Relatedwhen i recored Macro i try to select cell A1 and write in It Yahya the Code Come Like this one ...
View 9 Replies View RelatedI have a spread sheet in excel that I enter a date(a1) the supplier(b1) product ordered (d1) and an order number(g1) when I record a macro to copy theses cells in to a sheet called a purchase order sheet (i.e. A1,B1,D1,G1) the macro runs and prints off the order sheet how do I get the macro to run when I fill in line (A2 etc) when I enter a new order.
View 9 Replies View RelatedThis problem occurs in EXCEL 2000/2002/2003. I open a CSV file generated by perform.exe and convert the information using Data/TextToCollumns - Delimited/Colon and Finish. When i execute these steps in Excel i don´t have problem, but when repeat these steps after recording a macro (Tools/Macro/Recording Macro) occurs this problem.
After a click finish option, i receveid this message
"Numero excessivo de continuações de linhas" (Portuguese message)
"Excessive Continuation lines" ( translate to English )
and recording macro stop. I don´t know what happen. I attach a ZIP file with a CSV file to test and analysis.
I frequently use the record option to start off my macros. I realize this usually results in recorded events which are not absolutely necessary (recording a print macro is one that is full of excess line items). I then try and combine what I have recorded with what I have garnered from this wonderful website. If my spreadsheets are small - and I am not writing code to pass any inspections - is there a need to go back and clean up?
View 2 Replies View RelatedI incorporated more codes to the ones that were just solved from this board, but how can I make the active cell stay on A1 of sheet "hypo_tax_dropdown"? Also, I obtained the codes for removing the duplicates from macro recording, will these codes work on any machine? I noticed that it doesn't have worksheet.function
Sub Macro1()
Dim X As Long
Sheets("Hypo_tax").Select
[Code].....
I am having trouble with a project for school. The instructions are: (In Worksheet 1) Type Your Name. Now, begin recording a Macro. Copy and Paste your name from Worksheet 1 to Worksheet 2. Fill in the background and edit the font. End.
Here is an example of the coding.
ActiveCell.Range("A1:E1").Select
Selection.Copy
ActiveSheet.Paste
Application.CutCopyMode = False
With Selection.Interior
.Pattern = xlSolid
.PatternColorIndex = xlAutomatic
[Code] .....
Now, according to the instructions I should be able to run the Macro in any worksheet....but anytime I run the Macro in any other worksheet I just get a yellow block without my name there.
I'm recording a Macro but I want to test certain section before I complete it, so can I pause the recording and then restart the recording again?
View 9 Replies View RelatedWhen I try to record macro, the small toolbar which has two buttons "stop recording" and "relative reference" do not appear. I need to turn relative reference on.
Can you please guide me how can I make it visible to turn relative reference on?
I'm trying to create a macro using Tools/Macro/ Record a New Macro. I need to record in the relative mode, but I cannot find the Relative/Absolute button. I have gone to Tools/Macro/Stop Recording but it only allows me to stop recording. I am on excel 2002
View 3 Replies View RelatedFixing a macro that i recorded in order to generate a pivot table on the same sheet and the same exact location every time. it seems that the macro fails every time i try to run and i'm thinking it has to do with the table reference. Again i want the table in the same sheet and the same location every time i run the macro. this is the recorded code so far.
View 1 Replies View RelatedI am working on this project that involves opening several Excel spreadsheets and copying the data into a new workbook. The problem is that the names of the various worksheets I want to copy change every day - it always reflects the date. I open 7 workbooks, go to the sheet named (for example)01.17.07, copy a static range and then paste it to a new workbook.
Is it possible to record a macro and use a cell reference in the destination workbook (the one I want to copy to) to tell it which worksheet to copy? So, for example, I would type 01.17.07 in cell A1 of the new workbook and the macro would look for the sheet named 01.17.07 when running? Then tomorrow, I could type 01.18.07 and it would know to look for a different sheet?
How can I make XL (2000) display the macro start/stop recording and relative/absolute box that used to appear whenever I started recording a macro?
Such an apparently simple issue, but I can't resolve it!
Somehow I lost this small box, and I know how to force it to display via customize, but it doesn’t seem to work the same (relative does not work as such) and the buttons or box disappear.
I'm trying to record a macro that is using vlookups to get data from another data sheet, this data sheet will update each month - the old data moving back a column (so the new data is filled into the same column each time).
However, on the sheet where i am recording the macro, i need the data to fill in the next column each time.
I have recorded the below:
Sub Colourants()
'
' Colourants Macro
'
'
ActiveWindow.SmallScroll Down:=-30
Range("AK3").Select
[Code] .......
How do I get it so it doesn't record in cell 'AK' all the time but the next empty column each time it's run (however, it will always run from row 3).
I would like to be able to record keystrokes in a macro that mimicks the keystrokes, not the contents of the cells.
Like this:
I select a random cell, start the macro, and the macro should: ....
I'm trying to record a macro that calls up the saveas dialogue and uses a filename from a cell (it's the w/c date). I can start recording the macro, open the dialogue box and copy the contents of the cell but i can't get it to paste as the filname.
What I'm trying to achieve is to allow users of a muli-sheet workbook to be able to click on a 'save' button on any sheet and have the workbook save with a filename which includes the current week commencing date. This way all the weeks changes will be in just one file and from the following monday a new file will be started the the old one left alone as an archive.
I've created VBA code in Access 2007 to create a column chart in Excel, and it is working. I need to change the rotation on my category labels to 270 degrees vertical. When I record a macro on the chart in Excel 2007. I only receive the following
Sub chartingRotation()
'
' chartingRotation Macro
'
'
ActiveSheet.ChartObjects("Chart 1").Activate
ActiveChart.Axes(xlCategory).Select
ActiveSheet.ChartObjects("Chart 1").Activate
End Sub
How can I get the macro recorder to record changes to chart properties?
I have a workbook with numerous macros in it and they are assigned to buttons in the different worksheets. I am trying to record a new macro and when I start recording and click on one of the other macros nothing happens. This wasn't a problem in excel 2003.
View 2 Replies View RelatedI have a macro that is designed to paste a row of formulas into each Subtotal line on a 30,000+ line spreadsheet. I have specified the formulas that I want to paste in the named range "formulas". The macro below worked fine for about 3000 lines, then threw the error Run-Time Error 1004: Paste Method of Worksheet Class Failed on teh line ActiveSheet.Paste. I thought it had just bogged down my computer, so I added teh ScreenUpdating and Calculation lines, but they made no difference. I also tried reducing the range to just a couple thousand lines, which also made no difference. I also have found some suggestions on this forum and others for this error.
In addition to it working fine for 3000 lines, then failing, there are a couple other weird things. One is that on the line in the spreadsheet that threw the error, the formulas were pasted in up to column AX, leaving columns AY through CR blank. The second odd thing is that this exact same macro still works on my sample data spreadsheet (which only has around 50 records).
Sub FormatTotalRows()
Dim rCell As Range
Application.ScreenUpdating = False
Application.Calculation = xlCalculationManual
Workbooks("latest.xls").Activate
Range("formulas").Select
Selection.Copy
For Each rCell In Range("A3040:A5000")
If Len(rCell) > 0 Then
rCell.Activate
ActiveCell.Offset(0, 2).Select
ActiveSheet.Paste
End If
Next
Application.Calculation = xlCalculationAutomatic
Application.ScreenUpdating = True
End Sub
I have a piece of code (below) that autofilters a table based on a cell value (B7). I am looking to adapt this code so that the table can be filtered by an additional field in B8. This cell may be blank, in which case I want it to select all possible values (not just uncheck them all).
HTML Code:Â
Private Sub Worksheet_Change(ByVal Target As Range)
If (Intersect(Target, Range("B7")) Is Nothing) _[code]....
I am encounting problems with an AutoFilter which is run in a macro after the user has selected dates from 2 Date Pickers (DTPicker) on a user form. The filter is applied to 1 column in a spreadsheet containing dates in the formay "dd/mm/yy" and is supposed to filter dates =2 and between a range of dates as selected. The resultant filter is blank, if the macro is debugged at this point the date format for the 1st criteria is found to have swopped the "dd" & "mm" around but the 2nd criteria is fine. eg. user selected 01/07/07 and 31/07/07 the resultant filter applied is 07/01/07 and 31/07/07. I have re-formatted dates to Long as per the article on this site @ http://www.ozgrid.com/VBA/autofilter-vba-dates.htm but still get the same result ???
Dim fDate, tDate As Date
Dim lfDate, ltDate As Long
fDate = frmReportMenu.dtpFromDate.Value
tDate = frmReportMenu.dtpToDate.Value
fDate = DateSerial(Year(fDate), Month(fDate), Day(fDate))
tDate = DateSerial(Year(tDate), Month(tDate), Day(tDate))
lfDate = fDate
ltDate = tDate
While I try to create a sub - autofilter A column and select the...
- first entry (but not as a unique item, as data may changes weekly) once 1st item filtered - I'd do some function: sum weekly results, and keep only one row with the filtered item (paste special/delete rows)
- than step on next entry and do the same as before
- take these steps till the end of autofilter list, than remove autofilter.
.. with this action, I'd get the sum value of my weekly forecast on each individual items.
I've started as:
ActiveSheet.Range("$A$2:$BN$400").AutoFilter Field:=1, Criteria1:= _
"17963-E050LF"
But criteria should be like .. 1st entry ... 2nd entry ... last entry .. session end .. ?!
I have a macro which (see below) which will autofilter a spreadsheet to only show cases which are older than a 200 days. I'd like to add the ability for the end user to change the filter criteria as required (say from 200 to 300).
Ideally this would be done by having the macro reference cell G22 which is where I would allow the end user to change the filter criteria.
What could make this line of code stop working. It has worked for weeks, and just yesterday it stopped working. :x
ActiveWorkbook.Sheets("Email").UsedRange.AutoFilter Field:=2
The sheet is unprotected, and events are enabled. I don't know of anything different than before. What do I look for that would not allow this code to run?
I found this code for hiding an autofilter arrow for column 2. I would also like to hide the arrows for columns 35 through 50. Does anybody know how to do that? Thanks.
Private Sub Workbook_Open()
'hides all arrows except column 2
Dim c As Range
Dim i As Integer
i = Cells(1, 1).End(xlToRight).Column
Application.ScreenUpdating = False
For Each c In Range(Cells(1, 1), Cells(1, i))
If c.Column 25 Then
c.AutoFilter Field:=c.Column, _
Visibledropdown:=False
End If
Next
Application.ScreenUpdating = True
End Sub
I'm looking to use Autofilter and current region to select each persons data and paste to a new sheet.
The trouble is i'm not sure how to change the criteria name in the loop
e.g first name in list is Jack, next is John
Selection.AutoFilter Field:=1, Criteria1:="Jack"
I have some code for applying various filters, up to a maximum of five. However, not all five fields need necessarily have any filter but I can't find a way in the vaConditions line to show 'no filter' or 'All'.
vaFields = VBA. Array(1, 3, 4, 9, 10)
vaConditions = VBA.Array("", "", "", ">20", "")
Set rngData = Worksheets("CECO 2005").UsedRange
For i = 0 To 4
rngData.AutoFilter Field:=vaFields(i), Criteria1:=vaConditions(i)
Next i