How can I make XL (2000) display the macro start/stop recording and relative/absolute box that used to appear whenever I started recording a macro?
Such an apparently simple issue, but I can't resolve it!
Somehow I lost this small box, and I know how to force it to display via customize, but it doesn’t seem to work the same (relative does not work as such) and the buttons or box disappear.
I'm recording a Macro but I want to test certain section before I complete it, so can I pause the recording and then restart the recording again?
View 9 Replies View RelatedCan I adapt this code so that users receive the alert if they try and go to the next field without filling in the required ones, or - better - to combine it with a code that does not run a macro, but instead gives the alert, if the required fields have been missed. (I don't require anything to do with printing, this was the closest code I could find)
Private Sub Workbook_BeforePrint(Cancel As Boolean)
If Sheet1. Range("A1").Value = "" Then
MsgBox "Cannot print until required cells have been completed!"
Cancel = True
End If
End Sub
I have a program that requires the last 8 days to be total, unless there are 2 days off in a row. So my cells need to sum the previous 8, but then stop when two zeros show in the column and then restart following. One zero should continue to total the previous 8 days. As shown below, for 1/10/14 I should see 57.5. The sum needs to restart on 1/13/14 to show a total of 10.5. I have tried multiple formulas with no luck.
Col A Col B
1/5/140
1/6/1412
1/7/1412
1/8/1412
1/9/1411
1/10/1410.5
1/11/140
1/12/140
1/13/1410.5
1/14/1411
1/15/1411
I've seen a lot of timestamp solutions but none of them fit my needs. Also my VBE skills are not good enough to create this. So here's the problem:
I've got 3 columns E,F en H. H contains a validation list with 3 options OK, NOK and OPEN.
If H is NOK I would like E and F to be blank. If H is OPEN I would like E to contain a start date wich doesn't update. If H is OK I would like F to contain an end date wich doesn't update.
I have a link set up in an Excel document that plays a .wav audio file. The problem is it just plays the file. No media player comes up and I need to be able to manipulate the file when it is playing (i.e. stop, pause, play, Ffwd, Rew). Can someone tell me how to link the audio file up with a player? I am using a Windows based system. Unfortunately, Mac not available to me.
View 4 Replies View RelatedI'm currently creating an inventory tracking spreadsheet for my restaurant.
I'm using ="*"&A(x)&"*" to create the necessary barcodes. Some of my inventory numbers have leadings zeros that need to be included. The formula above is eliminating the 0's and how to get them to show. I've tried a custom number formatting but that isn't working for me.
I have a spreadsheet that has
worksheet_calculate and also worksheet_changes, its a combination of the 2...
and it's purpose is to make a record of the number every time it changes by populating it into the next row, so I end up having a very long data list
and what happens is that my spreadsheet has real-time data coming into one cell which makes it constantly changing....
needless to say, when my spreadsheet is opened, it starts to do it immediately...and it wont stop as long as the number keeps on changing.
I would like to make 2 buttons - one says START, one says STOP
and when I click on START, then it will start making record of this number and when I click STOP, then it stops recording the changes of this number.
I am attempting to create a datasheet to track the actual time an agent takes a break or lunch. Here is an example of the data that I am using.
name Date Lunch Sch Brk1 Sch Brk 2 Actual Time
BrandonHolt8/19/201411:10 8:30 1:20 8:24:20 Break
BrandonHolt8/19/201411:10 8:30 1:20 11:42:34 Break
BrandonHolt8/19/201411:10 8:30 1:20 12:57:46 Lunch
Because I have two break times, possibility of more depending on the agent, how do i create a formula that will look at this data, take the schedule time for say break one and only apply that against the time that is more in line with the closest actual time?
The company I work for does not use the usual calendar dates and uses a modified calendar. As an example, the month of January is Dec 31 thru Jan 27, February is Jan 28 thru Feb 24 and so on. I need to group data using a pivot table and summarize data by month, but as I just described above, calendar months will not work. Is there a way to modify what Excel sees as monthly dates?
View 9 Replies View RelatedI have a small project at work where I am being asked to put a simple spread sheet that will calculate a start/stop time - and also include the date. For example:
Start time 5pm, date: 3/13. The spread sheet to auto calculate what the stop time and date will be if a specific amount of hours is to be calculated. For example in this case, 12 hours. From calculating in my head that would be 5am the following day. However, how can I get this in excel to work and therefore all i would have to do is enter the start time and date, + 12 hrs, and excel would calculate the time/date after the additional 12 hrs.
I have this code :
[Code] .....
Great Timer. Have this assigned to a button to start, how can I work in a button to stop or pause this code from running?
I have a piece of code that put a check in all checkbox in column B from row 5 to row 50 but in column C, I have data from row 5 to 38. I want the macro to stop at row 38 in column B. When the cell in column C is empty stop putting checks in column B. How can I make this macro Check all checkbox down column B and stop when column C is empty. How do I add a loop to stop when the cell in column C is empty?
Private Sub CommandButton1_Click()
Dim CB As Variant
For Each CB In ActiveSheet.CheckBoxes
CB.Value = False
Next
End Sub.......
As you can see below, I've written code that writes random numbers into three columns of a spreadsheet (10 numbers in each column).
What I want to do is create code that will run the random number generator for a period of 1 minute and then stop. I know that I will need to write a timer subroutine to do this but I'm how unsure how to do this.
I would like to know the easiest way to temporarily keep a worksheet code from running while I am editing, then turn it back on when I am done. I was thinking a button with these commands(?)>
Application.ScreenUpdating = False
Application.EnableEvents = True
but I don't know which button to use, or if I would need a button for each.
I have a excel sheet of data numbers which blongs a packet of inventory where i found number series like this:
Start Range End Range Qty
2101200 2101499 300
I have to draw this onto a series like 2101200 then 2101201 then 2010202 etc.
but some time these numbers are in qty 30000 or more. I have questions
1- If any macro colud fill series suppose if write number in A2 and qty in B2 so it reads the qty of b2 and fill the series in A. If i write 1 in A2 and write 50 in B2 so the series should be auto fill 1 to 50.
My Second question is opposit of my above question.
2- if i have different number series in column a and i want them to be as start number in column b and end number in column c and qty in column d based like mentioned below example.
Series [b]Start Range End Range Qty
1 1 1 1
3 3 3 1
5 5 7 3
6
7
I have a timesheet where user updates start and end time for various tasks.
I have placed a time capture button in the excel sheet (which is simply a macro saying =now() function)
The user clicks it before starting and after finishing the task. The start and end times are captured in adjacent cells.
If the user starts the work, and goes on a lunch break say for 20 min, comes back finishes the task and captures end time, the time difference will not consider break time which is non productive.
How can I incorporate something like 'pause' option so that before he goes for lunch he can temporarily pause the time.
my excel sheet runs through a lot of calculations, opens Flowmaster, a simulations program, passes on data, receivs data and so on. Is there any way to have a user input to stop the whole simulation. During the first tries I had a lot of break point in my debugger. But now I want to have a button to hit or better just some keys to hit to stop it without using the ctrl+alt+del which closes everything.
View 4 Replies View RelatedI recently installed Excel 2007, and have shared others' joy in searching for things on the ribbon. I tried to record a macro to insert an autoshape. Excel creates the macro, but drawing the autoshape is not recorded. I'm sure I'm missing something obvious ...
View 7 Replies View Relatedwhen i recored Macro i try to select cell A1 and write in It Yahya the Code Come Like this one ...
View 9 Replies View RelatedI have a spread sheet in excel that I enter a date(a1) the supplier(b1) product ordered (d1) and an order number(g1) when I record a macro to copy theses cells in to a sheet called a purchase order sheet (i.e. A1,B1,D1,G1) the macro runs and prints off the order sheet how do I get the macro to run when I fill in line (A2 etc) when I enter a new order.
View 9 Replies View RelatedI'm trying to prepare a Gantt chart and I'm unable to display the start of month date in the x axis. Currently I'm able to display each month by giving an interval of 31 days, but I'm not sure how to display the start of month in the chart. Tried to add a secondary horizontal axis,but the secondary axis is not intersecting with the y axis and the grid is not getting aligned properly.
View 1 Replies View RelatedI have created a program to display an Alert based on a Date. I have this program enlcosed in the Workbook Open event. I need to popout this alert everyday, everytime EXCEL starts on a computer.
I had something in my mind though - I thought of plonking this program into the Workbook Open event of the Personal.xls workbook for a computer and thereby I could have achieved my requirement of popping out this alert everytime when Excel starts. However, there is one problem here. Every 3 to 5 days the dates in the workbook are going to change and I do not want the user to tamper with Personal.xls on his / her computer.
So I gave it a second thought. I created a shortcut of this workbook and placed it in the XLSTART folder for a computer and now the problem is - it opens the workbook itself rather than popping out the alert whenever Excel starts on the computer. So this would not work too.
Is there any other way I can make the alert pop out everytime I start Excel on a computer ?
This problem occurs in EXCEL 2000/2002/2003. I open a CSV file generated by perform.exe and convert the information using Data/TextToCollumns - Delimited/Colon and Finish. When i execute these steps in Excel i don´t have problem, but when repeat these steps after recording a macro (Tools/Macro/Recording Macro) occurs this problem.
After a click finish option, i receveid this message
"Numero excessivo de continuações de linhas" (Portuguese message)
"Excessive Continuation lines" ( translate to English )
and recording macro stop. I don´t know what happen. I attach a ZIP file with a CSV file to test and analysis.
I frequently use the record option to start off my macros. I realize this usually results in recorded events which are not absolutely necessary (recording a print macro is one that is full of excess line items). I then try and combine what I have recorded with what I have garnered from this wonderful website. If my spreadsheets are small - and I am not writing code to pass any inspections - is there a need to go back and clean up?
View 2 Replies View RelatedI have a large range of data and on each row the cells contain either 0, 1, No or another word. I would like to display the other word at the start but im really stuck on how to do it. This other word can change on each row but each specific row will only have one word. I can post a sample spreadsheet if necessary.
View 5 Replies View RelatedThe code contain using Autofilter to some columns, & then copy paste to another sheet to first blank row, & sorting it by asscending in Column A.
Both sheets are in the same workbook.
But for some reason, the Macro will giving the result expected if i run it step by step (by using F8 button under window VB editor). And if i call the Macro name it stoped in the middle of the process.
I incorporated more codes to the ones that were just solved from this board, but how can I make the active cell stay on A1 of sheet "hypo_tax_dropdown"? Also, I obtained the codes for removing the duplicates from macro recording, will these codes work on any machine? I noticed that it doesn't have worksheet.function
Sub Macro1()
Dim X As Long
Sheets("Hypo_tax").Select
[Code].....
I am having trouble with a project for school. The instructions are: (In Worksheet 1) Type Your Name. Now, begin recording a Macro. Copy and Paste your name from Worksheet 1 to Worksheet 2. Fill in the background and edit the font. End.
Here is an example of the coding.
ActiveCell.Range("A1:E1").Select
Selection.Copy
ActiveSheet.Paste
Application.CutCopyMode = False
With Selection.Interior
.Pattern = xlSolid
.PatternColorIndex = xlAutomatic
[Code] .....
Now, according to the instructions I should be able to run the Macro in any worksheet....but anytime I run the Macro in any other worksheet I just get a yellow block without my name there.
When I try to record macro, the small toolbar which has two buttons "stop recording" and "relative reference" do not appear. I need to turn relative reference on.
Can you please guide me how can I make it visible to turn relative reference on?