Why the following doesn't work?
Sheets("Sheet1").Range(Cells(1,1), Cells(20,1)).Copy Sheets("Sheet2").Range("A1:A20")
If I can get his to work, I will be able to use variables for the Cells arguments to give the functionality I want.
I am trying to do something that sounds fairly straightforward but have not been able to achieve the final result.
I have a sheet which has multiple range addresses stored in different cells and so far I have been able to pass the Range address to Range variables by looping through a range array. Now I would like to select these multiple ranges. My code looks as below;
VB:
Dim Cnt As Integer
Cnt = Sheets("Sheet1").(Range("1040").Value ' Cnt holds the the total number of ranges to be specified in Sheet1
Dim RStr(1 To 80) As String ' This will hold the range addresses specified in Sheet1 in cells C1041 to C1120. Upto 80 range addresses could be specified.
[SIZE=2] Dim Rng(1 To 80) As Range ' This will store the ranges based on the range addresses stored in RStr()
Dim i, j As Integer,
[Code]...
I am not sure on how to select multiple ranges using range array hence tried Union() however it is obviously not correct and throws an error.
I have a row data corresponding to the measuring of load cell per min and I need to average the values per hour. So I have a column B for the date (from 1-01-2013 to 31-01-2013, column C for the time (0:00:00 to 23:59:00), and D de values per min I want to average. I have to do the same for the rest of the month of 2013 (February, ...., December).
I would like to know if there is a way to create a formula to calculate the average of the first 60 values (to get the average of the first hour of 1-01-2013), and then copy it to get the average of the following 60 (average of the second hour in 1-01-2013) and so on.
If there is no way to do it, I would like to know if I can do it using functions like average, match, index, offset, what would be the best match of those functions.
I also tried it by doing the analysis in another tab and using the function "averageifs" with two criterias: one for the date (example 01-01-2013) and another one for the hour (example 0:00:00), but it didnt work, it show error: #value. I inserted an extra column in the data tab with just the hour (example 0:00:00) in front of the corresponding column with (example 0:01:00, 00:02:00, etc)
Equation I used for this:
=AVERAGEIFS('Data (min)'!D$6:D$43206,'Data (min)'!$A$6:$A$44646,A6,'Data (min)'!$B$6:$B$44646,B6)
=AVERAGEIFS(TAB AND COLUMN WHERE THE RAW DATA IS,RANGE OF CRITERIA 1,CRITERIA 1,RANGE CRITERIA 2,CRITERIA 2)
I got a range of data on sheet2, size changes everyday (dynamic) And in sheet1. I got a range of data and the size changes everyday as well. I need to copy the range in sheet2 to sheet1. The position would be at the cell after the last data in sheet1. e.g.
sheet1 got 105 data
I need to paste data of sheet2 start of row106 in sheet1
i am trying to copy few cells with data, and i have something like this:
Range("A3:AO" & Format(intRowCounter, "###")).Select
So this will copy all data withing those cells range, however, i want to copy only data from specific columns, ie, from column A3, and from K3:J
Sheet 1 to look into Sheet 2
> Find a certain string "name1" > if string is name, copy succeeding columns if not goes and checks another cell till it finds it.
> Then copied columns will be evaluated (sum, divide, etc)
this loops through all rows.
next problem i am seeing is what if it finds 2-5 names how can i combined all the cells copied?
I'm looking for an algorithm that does the following:
1. Open one-by-one a number of excel workbooks in a directory and copy their .UsedRange
(i.e. all sheet content in each of the workbooks).
2. Paste append one-by-one each of the workbooks .UsedRange of data into a master workbook that is already open (i.e. active workbook).
Note that the source workbooks and target master workbook contain the same format of data. So a simple copy and paste of the .UsedRange is apt.
Basically I need each .UsedRange of an opened workbook to be appended to the data from previously opened workbook in the master workbook already opened.........
I am creating a macro needed for many worksheets. I am trying to paste a range that will be different within each worksheet. I started the macro off by locating the correct cell to start the copy from. I want to copy 11 columns across and 32 rows down from the cell I selected.
View 7 Replies View RelatedI seem to be going round and round in circles with this, but I'm sure it should be easy.
I'm just trying to select a range of cells in Sheet2 of my workbook.
I've tried many different bits of code, including:
Dim namesTotal As Integer
namesTotal = 2500
Sheets("Sheet2").Activate
ActiveSheet.Range(Cells(1, 1), Cells(namesTotal, 8)).Select
(According to the Microsoft website, this is supposed to be the way to do it?)
I am trying to capture data for statistical analysis, but have hit a snag. As shown in attached sheet I have each day for the year broken down into hour time slots into which data will be added. As I will need to come up with a number of similar sheets in the future I was wondering if there is a way to automate through vba, a quick way to copy down the hour slots for each day, 365 times, rather than the laborious task of copy and paste manually.
View 5 Replies View RelatedI am trying to Copy Cell from one sheet to another sheet starting on A7 and then going to V ? i have a formula that figures that out for me just need another formula or VBA to copy it to the new sheet. i will attach the a test of the file.
View 3 Replies View RelatedWhy the following code gives me an error. I have so much trouble with ranges, I use the syntax as it is prescribed. Here is the code. I will include some code lines underneath since I imagine they wont work either.
[Code] .....
I eventually will be turning the range statements into copy and paste instead of select. At the moment I am using select to make sure the proper cells are being selected.
I am also attaching my complete workbook as well.
Attached File : Therapy Tracker - Tester V2.3 -deleted logo.xlsm
How can I select a range of cells dynamically, not know how many cells down for two columns that I will need to select, there will be a blank cell at the end of the needed range.
View 9 Replies View RelatedI'm using Excel 2003. I've got two different .XLS files, each with multiple sheets.
I'm trying to create a macro which will copy a range of cells from one sheet on one .XLS file (which is closed) to a specific place on a specific sheet on the current .XLS file (which is open).
So for the sake of argument:
I've got two Excel files: C:ApplesOldFile.xls and C:OrangesNewFile.xls
OldFile.xls is closed -- NewFile.xls is open and in front of me.
I'm trying to copy the data in ranges B6:C41 and F6:F41 from Sheet2 in OldFile.xls to the same ranges on Sheet6 in NewFile.xls. There are no formulas in these cells -- just data (numbers).
I keep getting error messages, failures to copy to clipboard, etc.
I have a series of data values in non-adjacent columns in an excel spreadsheet.
In the following example, assume the | (vertical bar) refers to the start of
a new cell:
F|45|A|30|F|15|F|10
Using the SUMIF formula, I want to add all numbers which are preceded by a
cell containing the letter F.
SUMIF(A1:G1,"F",B1:H1)
What I need to do is specify a range of every second cell in the row (starting with Cell A1) for validating they equal F, and a range of the alternating cells (starting in column B1) for the range containing the data to add. How can I specify these ranges (I can't name each cell individually as I have more than 30 cells to add up in my real life situation and the IF function allows selection of no more than 30 values)?
I'm looking for a macro that only selects the unprotected cells in a range. So that I can copy a formula in these cells.
I found the below macro on the web but it will select all the unprotected cells in the worksheet. I guess this one can easily be adjusted to only select the cells in a range, but I do not know how to do this.
Code:
Sub SelectUnlockedCells()
Dim WorkRange As Range
Dim FoundCells As Range
Dim Cell As Range
Set WorkRange = ActiveSheet.UsedRange
For Each Cell In WorkRange
If Cell.Locked = False Then
[Code]...
I have come up with this bit of code by joining in two separate sets of code that I used earlier. What I want to do is this, for a given range I need to find each cell that has a comma and once that cell is found a formula has to be applied in a cell few columns to the left.. Here is the code that I am using..
Code:
Sub Macro8()
Dim i As Long
For i = 1 To 1000
[Code]...
The sheet can be downloaded from here, I want column H to be (Col B / Col C) whenever Col A has a cell with comma in it. For this sheet col H needs to be populated 3 in places. The code above does it only for first instance.
I am looking for a macro that will allow me to select the range of A5 to the last column with data in row 5
View 9 Replies View RelatedI need to select data starting from cell 16B until 16K until the end of excel file... i will use this to export data into database later... I have attached a sample excel file with records needed to be selected
View 3 Replies View RelatedI have a spreadsheet which always contains data beginning in column A and through row H. However, there may be blank cell(s) in columns B through G. Therefore, if I use
Range(Selection, Selection.End(xlDown)).Select
it will not take me to column H if say column d has a blank cell. The same applies to my rows which always vary.
I'm trying to create a macro for another user that she will use repeatedly for many different spreadsheets. Each spreadsheet will have a varying amount of rows that will need to be exported to a different file. She will highlight the cells she wants exported and then hit a button to do so. My problem is this: how do I code a macro so that it will know which cell is the beginning of her selection and which is the end?
View 2 Replies View RelatedI have a spreadsheet that allows users to paste set data from a PDF Image (using OCR) straight into Excel and then use the MID function to split the data accordingly.
Unfortunately, the OCR isn’t too intuitive and gets it wrong sometimes.
So to counter this, in another sheet (in the same workbook) I have a manual input section, and a simple macro button that pastes this data into the same fields where the OCR text would be, so that the main sheet works exactly the same way as before.
The problem is, and most likely due to the simplicity of the sheet, if a combination of OCR pasting and manual inputting is used, when I hit the paste button, it over rides the OCR data with blank cells
In the link below I have shown what is currently happening (1, 2, 3), and an example of what I would actually like it to do (4, 5, 6).
Example - Online Spreadsheets - EditGrid
So, in the 2nd scenario, I would like “5” to recognise that the respective cells in “4” already contain data and fill them ‘Grey’. This I have already achieved with basic conditional formatting.
However, I need to take it 1 step further and say that if the parent sheets cell (Auto OCR) contains data, as well as filling cells (in sheet Manual) lock these cells off and prevent the end user from adding data and/ or being copied over to the parent sheet.
Is this possible?
The result then being the parent sheet with both OCR text and copied text from the manual input sheet.
Both sheets are protected anyway and only allow for user input in certain areas, so is it even possible to apply further protection once the sheet is locked already?
I have this:
Private Sub CommandButton1_Click()
Worksheets("Sheet1").Activate
Range("A1").Select
Selection.End(xlDown).Select
ActiveCell.Offset(rowOffset:=1, columnOffset:=0).Activate
ActiveCell.PasteSpecial
End Sub
it errors to: SELECT METHOD OR RANGE CLASS FAILED
I have a sheet that has 65000 rows and 3 columns, I need to load this sheet into a system that will only deal with 25000 rows at a time. How do you do a huge range select with Excel?
I need to select range a1:c24999 cut it out and paste it into another sheet. I have about 75 of these these sheets to do is there a way with a formula, a script or? to do these huge selects?
I am a Mac user, running MS office 2008 for Macintosh.
How do I protect a select range of cells from being changed? There may be some formulas in certain cells, which produce data based on other worksheet cells. These cells are not for user data input, but for data output only. I don't want end users to acidently delete the formulas in cetain range of cells, by entering a value in the cell, which then will write over the formula.
View 5 Replies View RelatedI am having a problem putting a range select statement in my macro. Here is what I'm trying to do. I want to select E1, then count down 10 cells below and copy. My sheet is filtered, so those rows are not continues. When I do the record a macro it highlights the rows and it looks like this (e10:e506, but it's only 10 items). I only want it to count down 10 cells and copy. Is there a statement for this.
View 3 Replies View RelatedI'm trying to select a contiguous range of cells in a column and then iterate over that. I keep getting error "91", object variable not set. I have:
View 5 Replies View RelatedId like to copy a range of cells: (A1 A4) and paste them into Cell A5, but heres the rub: I would like the values after I paste them to be separated by commas.
View 9 Replies View RelatedI want to do is clear all the cells on a worksheet that are not locked. Problem is that any cell could be locked, no rhyme or reason.
View 9 Replies View RelatedRange("B25").Name = "EndMull"
Its fine but if i insert a new row or column then it mucks the whole thing up. Is there away of naming them but if any cells, row or columns are inserted the range will automatically adjust to suit1