I'm trying to get a macro together that will take a set of workbooks that I've merged (using Ron de Bruin's RDBMerge add-in) and transpose all columns from B to HB into rows. Now, I know that each spreadsheet is 210 columns and 244 rows large and they are concatenated on one another. Attached is a brief example of what I am trying to go from and what I am trying to get to.
View 1 RepliesI would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
I need a formula to transpose rows to columns of a large table. The transpose array formula is not working for me. I know there is a column and row function formula to do this, but I can't remember it.
View 3 Replies View Relatedsee the attached file below. I have monthly precipitation data for yrs 1950-1999. I need to have the data formatted such that the precipitation data is copy/pasted into one single column, going all the way from jan 1950 to feb 1950 (next row) to mar 1950 (next row).....dec 1999 (last row). On occasion, I will also have data for shorter/longer time periods. the macro code I'd need to take this data and line it all up into one single column?
View 7 Replies View RelatedI have a macro that would check data in Column A and validate if a particular number is repeating, then for that number go to column B, Take the Values from there go to a new sheet and paste the values in a row.
CurrencyDateRef CodeIDAccountAmountDes.USD07152011XDVU4315210.4200.C5001.USD-18,606,772.190Distr Payable 07152011USD07152011XDVU4315210.4200.C5002.USD-111,131.450Distr Payable 07152011USD07152011XDVU4315420.4240.C5001.USD18,606,772.190Distr Payable 07152011USD07152011XDVU4315420.4240.C5002.USD111,131.450Distr Payable 07152011
I get the data in the below format
CurrencyDateRef CodeIDAccountAccountAmountDes.USD07152011XDVU4315210.4200.C5001.USD420.4240.C5001.USD-18,606,772.190Distr Payable 07152011USD07152011XDVU4315210.4200.C5002.USD420.4240.C5002.USD-111,131.450Distr Payable 07152011
I need to the macro to get the data not from the second cell.
Below is my macro
Sub test()
Dim idRange As Range, c As Range
Dim uniqueID As String
Dim destSht As Worksheet, sourceSheet As Worksheet
Dim r As Long
Dim i As Integer
Dim map As Object, key, item
[code]....
I have the following macro which I use to transpose a number of columns in one sheet to rows in another sheet.
PHP
Sub task1()Dim i As Integer, n As LongFor i = 5 To Columns.Count Step 2 n = n + 1 With Sheets("Working_Checklist_1").Cells(10, i).Resize(16) Sheets("Summary_Intermediate").Cells(n + 2, "c").Resize(.Columns.Count, .Rows.Count) _ .FormulaArray = "=if(transpose(Working_Checklist_1!" & .Address & ")=0,"""",transpose(Working_Checklist_1!" & .Address & "))" End WithNextEnd Sub
I'd like to change this macro so to transpose from rows to columns. I've tried a couple of things, but can't quite get it to work.
I'd like to transpose every second cell starting from E7 to IV7 in Working_Checklist into column BU in Summary_Intermediate, starting from BU3.
i have the following spreadsheet with dummy data however, there is a before and after scenario i have posted is this possible with a macro ...
View 9 Replies View RelatedI have two columns of data as follows:
10:57:42 273
10:57:42 263
10:57:42 253
10:57:42 241
10:57:37 273
10:57:37 243
10:57:37 249
10:57:37 261
10:57:37 253
11:04:47 241
11:04:47 253
11:04:47 263
10:54:31 254
10:54:31 240
10:54:31 265.......
I have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
I have Data in Row 1 beginning in Cell E1 then K1 (Every 6th Cell) About 300 Records with 5 Blanks between each one of them...
How would I get that Data In A5 Down Without the Blanks?
I am trying to save me a lot of copy and pasting. I have cells A1:A100+ with customer names listed out. I am trying to create a chart on a different page but on this particular chart, i need those customer names at the top of the columns going across the page instead of the rows.
View 3 Replies View RelatedI need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014
28/1/2014
28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
I m new to macro and I need to copy the data from 49 cells value which are
present in Two Rows to be converted into TWO columns and 48 rows
I have run a macro for this and I got
Sub Macro4()
'
' Macro4 Macro
'
'
Sheets("WRIGLEY011209").Select
Range("C1:AX2").Select
Selection.Copy
Sheets("Sheet3").Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=True
Range("A1").Select
Sheets("WRIGLEY011209").Select
Range("A2:B2").Select
Application.CutCopyMode = False
Selection.Copy
Sheets("Sheet3").Select
ActiveSheet.Paste
Application.CutCopyMode = False
Selection.AutoFill Destination:=Range("A1:B48"), Type:=xlFillDefault
Range("A1:B48").Select
End Sub
I need to copy and paste transpose, some over 100 values, but I want to add a comma after each value, so they can be put into JD Edwards for running a report.
View 3 Replies View RelatedI have a long column of data in column D (D2 to D8761) and I would like to sequentially select 24 cells at a time (D2:D25, D26:D49, D50:D73...D8738:D8761) copy them and paste them to another sheet as separate rows.
For instance, the selected data from Sheet 1, D2:D25, would be pasted/transposed to Sheet 2 B9:Y9. I would like the macro to loop so it would then select D26:D49 and paste/transpose to B10:Y10 and so on until it finishes transposing the final data group of D8738:D8761.
I'll add the macro that I recorded using the brute force method so perhaps you can have a better understanding of what I am trying to accomplish.
Sub Macro5()
'' Macro5 Macro
Range("D2:D25").Select
Application.CutCopyMode = False
Selection.Copy
Sheets("Sheet2").Select
Selection.PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
[code].....
I need to copy and paste 4 rows individually under each of the 500 rows.
View 12 Replies View RelatedI have a sheet that has columns from A to BS, and the column headers start in Row two.
I need to 1st filter the data by Column E where the data in Column E should not contain a particular Value, like"Sleeve".
Then it needs to copy the Columns A,D,G, BN, BO, BP,BP,BR & BS.
And it needs to delete Rows 3 & 4 from the current sheet, before pasting it in a new sheet.
And at the bottom of the sheet it needs to give me a count of the rows and the month end date for each month.
I think I have a very straight forward problem, I'm copying about 400 values from one workbook to another (from vertical range to horizontal range) and I currently have about 400 lines of code in order to do this. Below I've pasted the code I'm using now but the macro takes an estimated 30 seconds to run. I figure if I can reduce the number of lines the macro will run a lot faster
RowCount = openWb.Sheets("Library Raw Shear Rates").Range("A3").CurrentRegion.Rows.Count
With openWb.Sheets("Library Raw Shear Rates").Range("A3")
[Code]......
I would like a macro which will copy range $A$1:$Z$1 and paste it as values into AA1:ZZ1.
Easy enough on the first run; but on the second, copy the same range $A$1:$Z$1 and paste it as values into AA2:ZZ2
third run into AA3:ZZ3, etc.
In sheet Model RC BOM I am trying to copy all the rows under Level 1 (row 3), including level 1, until it reaches the next Level 1 (row 537) (not including row 537), and paste those cells in next tab (BIW) starting at row 2. The next operation is to copy all rows under Level 1 (row 537), including level 1, until it reaches the next Level (row 827), not including row 537, and paste those cells in the next tab (Chassis) starting at row 2.
The challenge is that I cannot use the row numbering in sheet Model RC BOM as a reference for coding because the content will change every week.
The number of rows in my spreadsheet will change. I am creating a Macro to insert a column and enter a formula in the second cell of the new column. I need to copy that formula down through that column to the last row, but don't know how many rows there might be that day.
View 2 Replies View RelatedWhat I have are dates in Column B with a lot of blank rows in between. For example: cell B2 has a date in it and then the next date would be on cell B54. I need a macro to copy cell B2 until it finds a new date (which is in cell B54) then copy the date in cell B54 until the next date again.. so on..
View 9 Replies View RelatedTwelve months of Data.
Each month in Columns
like so:
The labels are on the left.
The data is in each column to the right.
From column 2 to the end of the sheet at far right.
Family Size
One: 1 3
Two: 2 1
Three: 1 2
Four: 1 1.....................
i need to mark some row (which has some content written in), mark other row(with data too) and switch/transpose them mutual. when i was trying transpose method, which is using for switching rowns and columns, it wrote me error, that data are overlapping. it means it cant work on same things (rows > rows, columns > columns).
View 14 Replies View RelatedA code to transpose from rows to columns.
But why doesn't it transpose like the sheet 'How it should be' but all in one row?
HTML Code:Â
Sub MG10Jun34()
Dim Rng As Range
Dim Dn As Range
Dim c As Long
Application.ScreenUpdating = False
[Code] .......
I have 19 rows of data spanning 184 columns, and I'm attempting to transpose them to be 19 columns and 184 rows, which would normally be easy. The problem is I need to be able to transpose the numbers while still keeping the formulas on a separate worksheet linking/connecting to the correct cells. I almost need to be able to cut/special paste - transpose, but that's not possible... I don't think.
View 3 Replies View RelatedI have some sales history data for products which I need in one row. Each product has 4 rows x 12 columns (months) of data under each other. I need the 48 months of data in one row per product. A sample of the type of data I have is below (product A) along with the expected result. In the real data there would be many products not just one as per my example.
Sheet1 *ABCDEFGHIJKLMNOPQRSTUVWXYZAAABACADAEAFAGAHAIAJAKALAMANAOAPAQARASATAUAVAW1
Sample Data
[Code] .......
how transpose my 4 Colunas to 1 Row
Before:
Data1
Data2
Data3
Data4
[Code]...
how do i transpose from rows to columns
i have 545 names with addresses
Sheet1 GH221name23 adress line124 adress line225 phone26 fax272name28 adress line129 adress line230 phone31 fax323name33 adress line134 adress line235 phone36 fax37 city384name39 fax40 city Excel tables to the web >> Excel Jeanie HTML 4
selecting each block of name+address is tedious --how can i do it in one go
also the number of rows varies in each block -- at places there are 4 rows at other places 3 rows and so on
I have some summary results stated in row format by GL at the row header. I would like the GL to be the column header and the unit to be the row header. I tried using the index function but keep receiving #VALUE! error. Sample attached.
View 3 Replies View Related