Macro To Copy Rows Based On Moving Date And Paste Rows Into Identical Sheet
Jan 28, 2014
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
I have a workbook with 4 sheets relating to areas and a summary sheet and introduction.
On the introduction sheet I have a dropdown which lists all the available products my company make.
What I want is to be able to select the product from the dropdown and then click a button which will then copy and paste the headers and any rows which relate to the selected product from each of the area sheets and paste it all onto the summary sheet.
I need to copy specific rows that have a specific value in colum B and Colum M to new worksheets.
So from attached screenshot , say for an example macro shud filter rows that have "BigPond" in coloum B ,"RG2" in column M & "INT" in column W and i dont want all cells in these rows , i only want copy cells under column C,AK,AL,AM (in this order) to my other excel sheet that is named "BigPond" and it should paste it starting from Row5?
I want to avoid recording a macro as it selects a range and i am expecting more new rows every week so if a record a macro the cell range for selection changes and i get incorrect result.
I have a file that has two sheets, I have some formulas in the first sheet named "Data",What i would like to have is, If column G in the sheet Data is "Closed", then i want that particular row to be cut from the sheet " Data" and pated in to the Sheet "Done".
I have spent a few days searching through forums but cannot find examples that i have been able to successfully adapt ( because they are to complicated for my limited knowledge). I have a workbook with 5 sheets, sheet1 (current), and sheet 4 (archive) are the important ones. I need a macro to
A) copy rows from "current" to "archive" ( to the 1st empty row) if column S of "current" contains "Closed" ( the word is generated by formula).
B) The paste needs to paste special values and number formats ( want to lose formula but not conditional formatting).
C) data sort "archives" based on col A - this puts the newly archived data into correct sequence.Data sort lowest number 1st
D) delete the copied rows from "current".
e) give me a count of how many rows it deleted, (I have a macro to insert rows so will run that manually to recreate the correct number of emtpy rows (with formula and formatting) to bring the current sheet back to usual size.
I tried modifying a macro by RPaulson (based on cells on one sheet to cells on another), to work with entire rows but couldn't get it to work.
Found that paste special uses PasteSpecial xlPasteValues, but , and thats about it.
I have about 10 rows of data that have columns of information describing computer hardware and pricing. There are 10 rows, because each row represents a different country and different tax rates and pricing changes per country. So each column of a row has a specific formula to calculate information for that row's country information. All these 10 rows of formulas are kept as a reference at the bottom of the sheet.
At the top of the sheet I need to have a drop down menu to choose a country and then it will automatically copy and paste the row of that country to the current row at the top.
Is there any easy copy/paste macro for such a thing?
I am a production manager for a homebuilder and I am trying to create an Excel spreadsheet that will allow me to input a date in a column and have a second column dependant on the date and move as I change the date.
Since no work is done on weekends, I'd like the output column to skip weekends and move the input to the next available weekday. I have conditionally formatted the date to be a red fill as a visual cue but I'm not sure where to go from here.
This spreadsheet must perform calculations for every line since new items are added every day, so VBA is probably better than copying formulas down every line of the spreadsheet:
With the press of a button, I need to be able to select a range of dates and copy all lines within the range to a seperate sheet with the desired name under the same headings they currently reside under. I have included some modified code that is being used in another spreadsheet that was created for me, but I do not pretent to understand all of it and I no longer work with the creator of the spreadsheet. How do I use a button to open the form for date selections and entering the name of the new sheet, and then use the start button on the form to begin the matching and copying to a new sheet? If there is an easier way I am all for that too.
Also, I need to keep a total of all items by month as well as a monthly and annual average of the Total Item Value on the FY09 tab. This will eventually produce another sheet when a button is pressed to submit as a report. I think part of this answer is in using the MONTH(serial_number) function but I can only get this to work for a single cell. I need to search the entire Distribution 'D' column, match all the months to the FY09 tab to the respective month, and calculate the totals and averages. I think SUMIF may also be needed as well but need the MONTH(serial_number)to work first. If there is a way to code all of this in VBA that would be fine as well.
I have a pivot table on Sheet1 where I am trying to get the totals and averages described above but I am not sure it can do what I need. In column 'B' I need the total number of each item as well as the total number of all items. I tried various formats and adding the totals from the Totals tab but I have not figured it out.
I'd like to write some code to do the following: When the first cell of the row contains an "Y", move the entire row to another sheet (in the same file), keeping in mind that this sheet already contains some rows (so add the row on the first empty row in the sheet). Afterwards the original sheet contains no longer any rows in which the first cell is filled with an "Y".
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet. ....is equal to "McCormick" copy row to "McCormick" spreadsheet. and so on.
I am pulling from odbc into an excel sheet Thier is one column with our Sales Order Numbers.
I would like to have a search box or box pop up asking a user to enter the Sales order number they need. Once they do that it will search thru the list and copy the rows with that Sales Order Number, then paste them to another sheet.
I need help on setting the searching part up and selecting the range to copy....I think I can take it from thier after that.
I'm trying to get a VBA code that will allow me to copy and paste rows based on a date range, for example
Column A = (Blanc) Column B = Line Number Column C = Date
i need to have a pop up box that i can input the start date and then another pop up for the end date (mm/dd/yyyy), then using these dates copy the whole row which are within the date range to another sheet called Summary.
I have tried to write some VBA to copy and paste rows based on the condition in cells A:A in sheet one. So far I have managed to put something together which will paste the first row and insert a new row below but keeps on pasting the same row. But not much else! Not sure I have tried to make it more difficult than what is it.
I would like it to copy a row based on a certain condition ("WRW") in A:A sheet one and paste it to sheet2.
VB: Function DoOne(RowIndex As Integer) As Boolean Dim Key Dim Target
1) I have a original worhsheet_A which with header rows(1~6) and many columns. 2) In the sheet_A, there are 2 columns (ColumnN & S) which I need to set criteria (value>5). 3) If any row's data which meet the criteria (value >5) with either column N or S, copy all the entired rows to sheet_B following sheet_A sequence. 4) The sheet_B should have the same header row with sheet_A(row1~6).
Btw, is possible create a corn job trigger this macro to run daily 9am to send out the worksheet_B as email, so that the command button can be disregarded.
In sheet Model RC BOM I am trying to copy all the rows under Level 1 (row 3), including level 1, until it reaches the next Level 1 (row 537) (not including row 537), and paste those cells in next tab (BIW) starting at row 2. The next operation is to copy all rows under Level 1 (row 537), including level 1, until it reaches the next Level (row 827), not including row 537, and paste those cells in the next tab (Chassis) starting at row 2.
The challenge is that I cannot use the row numbering in sheet Model RC BOM as a reference for coding because the content will change every week.
The number of rows in my spreadsheet will change. I am creating a Macro to insert a column and enter a formula in the second cell of the new column. I need to copy that formula down through that column to the last row, but don't know how many rows there might be that day.
What I have are dates in Column B with a lot of blank rows in between. For example: cell B2 has a date in it and then the next date would be on cell B54. I need a macro to copy cell B2 until it finds a new date (which is in cell B54) then copy the date in cell B54 until the next date again.. so on..
I am new to macro and just trying to learn. I have a spreadsheet with 20000 rows and 8 columns. I am trying to identify equal rows based on the values of columns C, D, E and F. then I need to separate equal bunches with a blank row. Then I need to copy the ID number from the first cell of column B of each bunch and paste it for the rest of the rows in that bunch. I have written the following code but this does not put the ID of the first cell in a bunch for the rest of the rows in that bunch.
I'm trying to get a macro together that will take a set of workbooks that I've merged (using Ron de Bruin's RDBMerge add-in) and transpose all columns from B to HB into rows. Now, I know that each spreadsheet is 210 columns and 244 rows large and they are concatenated on one another. Attached is a brief example of what I am trying to go from and what I am trying to get to.
I am working on a macro where I am creating a formula to string together some text columns and then copy the formula down the entire column. The data source I will be performing this on will change in number of rows period to period. The data would be in columns A,B & C and the formula is in D. The formula in D is stringing together the data in AB & C and then I want to copy and paste that formula down to the bottom of all of the data. What would the code be for the copy and paste with variable rows?
I want to create a macro that will copy and paste a couple seperate collumns but the problem is that each month, and each invoice, contain a different amount of rows so I can't "record" a macro. Lets say I start on A4 which is the heading of Column D..below it are a bunch of records at the end of the records is a space. I need it to stop there. Then do the same for Column G, I, etc. I would like it to copy each column and paste in a new workbook.
I need to extract a number of cells, based on the date of another cell and then past these values into a column on anther sheet. Example: Sheet "Name1" in Column "G" is where I want the values to be pasted.
Sheet "Name2" has the dates in Column "B". I wish to extract the entries in Column "K" into Column "G" on Sheet "Name 1". I also have another Sheet, "Name 3" which has the the date field in column "B" and the entries I wish to extract in Column "K"and pasted in column "G" on the "Name 1"sheet.
The date range I'll be looking to past is by Month and year. The date fomat is dd/mm/yyyy.