Macro To Copy Data From Columns And Paste In Rows After Given Criteria Matches?
Nov 21, 2011
I have a macro that would check data in Column A and validate if a particular number is repeating, then for that number go to column B, Take the Values from there go to a new sheet and paste the values in a row.
CurrencyDateRef CodeIDAccountAmountDes.USD07152011XDVU4315210.4200.C5001.USD-18,606,772.190Distr Payable 07152011USD07152011XDVU4315210.4200.C5002.USD-111,131.450Distr Payable 07152011USD07152011XDVU4315420.4240.C5001.USD18,606,772.190Distr Payable 07152011USD07152011XDVU4315420.4240.C5002.USD111,131.450Distr Payable 07152011
I get the data in the below format
CurrencyDateRef CodeIDAccountAccountAmountDes.USD07152011XDVU4315210.4200.C5001.USD420.4240.C5001.USD-18,606,772.190Distr Payable 07152011USD07152011XDVU4315210.4200.C5002.USD420.4240.C5002.USD-111,131.450Distr Payable 07152011
I need to the macro to get the data not from the second cell.
Below is my macro
Sub test()
Dim idRange As Range, c As Range
Dim uniqueID As String
Dim destSht As Worksheet, sourceSheet As Worksheet
Dim r As Long
Dim i As Integer
Dim map As Object, key, item
[code]....
View 2 Replies
ADVERTISEMENT
May 1, 2013
I'm trying to get a macro together that will take a set of workbooks that I've merged (using Ron de Bruin's RDBMerge add-in) and transpose all columns from B to HB into rows. Now, I know that each spreadsheet is 210 columns and 244 rows large and they are concatenated on one another. Attached is a brief example of what I am trying to go from and what I am trying to get to.
View 1 Replies
View Related
Jan 20, 2009
I would like to match column data in a source spreadsheet to column data in a target sheet. If a match is found, I would like to copy the corresponding row range from the source sheet to a separate, third sheet. For values where no match in found in the a target sheet, I would color the unmatched cell in the target sheet red. If a match was found, the cells would be colored green. The data in the Source sheet is in column A, while the Data in the Target sheet is in Column T. The data will be pased in the third sheet in Column T preserving original formats
I have this code, gleaned from several postings on this forum that somewhat works. The problem is that I get false mismatches (i.e. some cells get colored red even when there is a match and the data got copied to the third sheet) even though there are no duplicates. I have made sure that the formats are identical in both Target and Source sheets to try to fix this. Also, I don't want to cut the entire row , but just copy and paste a row range onto a third sheet. The column and row ranges are variable. I am attaching a file.!!
Sub CutRows()
Dim i As Long, k As Long, n As Variant, r As Range
Application. ScreenUpdating = False
With Sheets("Source")
Set r = Range(.Cells(1, 9), .Cells(65536, 6).End(xlUp))
End With
k = 0
i = 6
While Not IsEmpty(Sheets("Target").Cells(i, 20))
n = Application.Match(Sheets("Target").Cells(i, 20).Value, r, 0)
If IsNumeric(n) Then
Sheets("Target").Cells(i, 20).Interior.ColorIndex = 35
k = k + 1
Sheets("Source").Rows(n).Cut Sheets("Sheet3").Rows(k)
Else
Sheets("Target").Cells(i, 20).Interior.ColorIndex = 3
End If
i = i + 1
Wend
Application.CutCopyMode = False
Application.ScreenUpdating = True
End Sub
View 7 Replies
View Related
Feb 20, 2007
I am trying to use a "=COUNT(IF(..." formula to count the number of hourly employees that have start dates older than 3 years. Column A has the start dates and column B has the salary status (S/H). =COUNT(IF(AND(A2:A1000<DATE(2004,1,1),B2:B1000="H"),A2:A1000)) This formula returns 1 no matter what I change the data to.
View 3 Replies
View Related
Dec 6, 2013
The number of rows in my spreadsheet will change. I am creating a Macro to insert a column and enter a formula in the second cell of the new column. I need to copy that formula down through that column to the last row, but don't know how many rows there might be that day.
View 2 Replies
View Related
Nov 18, 2013
I have a workbook with four tabs or four sheets.
Tabs 1, 2 and 3 have a column of data (Column A) on each sheet. They all start from the same cell. Each cell of data are just numbers. The column (an array) of data will not have blanks between.
But, they are not the same number of data. They vary.
Meaning, Tab 1 may have 15 numbers (A1 to A15), Tab 2 may have 20 numbers (A1 to A20) and Tab 3 could have 5 numbers (A1 to A5). Each iteration of the workbook may have different number of data in the A column on these tabs.
Now on Tab 4, I want combine the data from all three tabs into one column (in column A).
So, Tab 4 has a column A with data from Tab 1 copy and pasted to (A1 to A15) as values, then (A16 to A35) have Tab 2 data copy pasted as values and (A36 to A40) have Tab 3 data copy pasted as values.
Basically, the macro on Tab 4 has to count the number of rows on each Tab that are populated with data values and figure out to copy all the data on Column A from each three tabs and paste the data value into the Tab 4 in one column of data (in values).
View 6 Replies
View Related
Jun 23, 2014
I have a macro that I am working on which I have gotten stuck on. It compares Column A and Column C and any numbers which match are pasted into Column D.
What I am getting stuck with is I need to copy and paste the data for column B to Column E as well. So in other words.
If column A and B match then the number from Column A that matches B will be pasted in column D along with the value that is right next to it in Column B.
Attached File : MatchingMacro.xlsm
View 11 Replies
View Related
Apr 29, 2014
What I am trying to do is to look at specific columns, then copy the data in that column from specific rows from sheet 1 (named TIA) to sheet Macro1. I think uploading a sample of the spreadsheet would be useful.
Unfortunately the spreadsheet is a living document and continues to grow in both column and rows.. The data extracted at this point is from row 7, 23-60 and copied into the new worksheet starting at A1.
Requirements:
1) Row 5 states the macro the column will be associated with. There can be more that one macro associated to a column.
2) When column is found, data from row 7 column (x) will be copied to sheet macro1 EX. If Cell G5 = macro1 then copy data from G7 to sheet macro1 at A1
3) When column is found, data from row 23 column (x) will be copied to sheet macro1
4) repeat requirement 3 till no more Scenario's
View 14 Replies
View Related
Jun 19, 2008
1) I have a original worhsheet_A which with header rows(1~6) and many columns.
2) In the sheet_A, there are 2 columns (ColumnN & S) which I need to set criteria (value>5).
3) If any row's data which meet the criteria (value >5) with either column N or S, copy all the entired rows to sheet_B following sheet_A sequence.
4) The sheet_B should have the same header row with sheet_A(row1~6).
Btw, is possible create a corn job trigger this macro to run daily 9am to send out the worksheet_B as email, so that the command button can be disregarded.
View 4 Replies
View Related
Oct 1, 2012
I have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
View 2 Replies
View Related
Apr 30, 2013
I have Data in Row 1 beginning in Cell E1 then K1 (Every 6th Cell) About 300 Records with 5 Blanks between each one of them...
How would I get that Data In A5 Down Without the Blanks?
View 9 Replies
View Related
Jun 17, 2008
I am trying to save me a lot of copy and pasting. I have cells A1:A100+ with customer names listed out. I am trying to create a chart on a different page but on this particular chart, i need those customer names at the top of the columns going across the page instead of the rows.
View 3 Replies
View Related
May 23, 2008
I need to copy specific rows that have a specific value in colum B and Colum M to new worksheets.
So from attached screenshot , say for an example macro shud filter rows that have "BigPond" in coloum B ,"RG2" in column M & "INT" in column W and i dont want all cells in these rows , i only want copy cells under column C,AK,AL,AM (in this order) to my other excel sheet that is named "BigPond" and it should paste it starting from Row5?
I want to avoid recording a macro as it selects a range and i am expecting more new rows every week so if a record a macro the cell range for selection changes and i get incorrect result.
View 14 Replies
View Related
Jan 17, 2007
I have a file that has two sheets, I have some formulas in the first sheet named "Data",What i would like to have is, If column G in the sheet Data is "Closed", then i want that particular row to be cut from the sheet " Data" and pated in to the Sheet "Done".
View 5 Replies
View Related
Apr 15, 2008
I have spent a few days searching through forums but cannot find examples that i have been able to successfully adapt ( because they are to complicated for my limited knowledge). I have a workbook with 5 sheets, sheet1 (current), and sheet 4 (archive) are the important ones. I need a macro to
A) copy rows from "current" to "archive" ( to the 1st empty row) if column S of "current" contains "Closed" ( the word is generated by formula).
B) The paste needs to paste special values and number formats ( want to lose formula but not conditional formatting).
C) data sort "archives" based on col A - this puts the newly archived data into correct sequence.Data sort lowest number 1st
D) delete the copied rows from "current".
e) give me a count of how many rows it deleted, (I have a macro to insert rows so will run that manually to recreate the correct number of emtpy rows (with formula and formatting) to bring the current sheet back to usual size.
I tried modifying a macro by RPaulson (based on cells on one sheet to cells on another), to work with entire rows but couldn't get it to work.
Found that paste special uses PasteSpecial xlPasteValues, but , and thats about it.
View 6 Replies
View Related
Aug 5, 2014
I have a file that needs to copy/change and paste data if column H has the following 3 abbrev but each of them has its paste criteria. see details below.
1) In column H, if abbrev ="Prod 10", insert 9 rows and then copy and paste but the codes in column G of the copied rows need to change to different numbers.
2) If abbrev ="Prod 4", change the code of the following 3 rows to 44298.
3) If abbrev ="Prod 14", insert 13 rows and then copy and paste.
Is it possible to have a macro to do these tasks?
View 4 Replies
View Related
Jan 28, 2014
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014
28/1/2014
28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
View 9 Replies
View Related
Apr 12, 2009
I have workbook with 2 sheets. Worksheet1 has a date by formula (Today()). Worksheet2 has dates listed in column A. I want to write a macro that will check that the date in Worskheet2, Column A matches the date on Worksheet1 then pastespecial -value from e2 on worksheet1 to the adjacent cell column B worksheet2. This is to create a log for changes over time. I have a macro that pastes to the first empty cell column B worksheet2 but I can not get the date correct.
View 9 Replies
View Related
May 8, 2008
I need to be able to search column y and rows 5-100 and where cells contain "A" copy and paste entire row to row 110. I am guessing it is really simple but I am obviuosly missing something
View 3 Replies
View Related
May 26, 2009
I have requirement to extact data into a spreadsheet. This data is extracted from CSV file which is huge normally over 7MB. I have found a macro on the internet which I have included with this post.
Sub split()
Dim ResultStr As String
Dim FileName As String
Dim FileNum As Integer
Dim Counter As Double
'Ask User for File's Name
FileName = InputBox("Please enter the Text File's name, e.g. test.txt")
'Check for no entry
If FileName = "" Then End
'Get Next Available File Handle Number
FileNum = FreeFile()
'Open Text File For Input
Open FileName For Input As #FileNum .................
I have also included reult data that I get after running the macro. I have cut down on data due to attachement restrictions. But usually there are multiple spreadsheets named "Sheet1, Sheet2, Sheet3 and so on". I have numerous requirements. First of all I want to be able to spreate data into columns. For now how I do that is by going to data -> text to columns and then selcting delmited and then selecting comma as my delimiter. Second thing I want to do is is only extract range of data from this output into a new worksheet. I am only interest in the name like for example ALBANY-Serial0/0/0 and data that is in the range of 8:00 AM to 6:00PM. So the new sheet should only have name and for that name data in the range of 8:00AM to 6:00PM for all the sheets "sheet1, sheet2 etc" until all data has been extracted.
View 7 Replies
View Related
Jan 29, 2014
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
View 1 Replies
View Related
Apr 26, 2008
I need macro to copy values from a Master worksheet on a daily basis, and paste them to multiple individual worksheets in cells adjacent to today's date (already crafted). For instance, a value of 8 is entered into a particular cell in the Master, it is copied and pasted into column E of another worksheet, on the row with today's date already written in column B. I need to do this repeatedly for over 50 worksheets.
View 2 Replies
View Related
Nov 18, 2009
I need to copy and paste 4 rows individually under each of the 500 rows.
View 12 Replies
View Related
Aug 24, 2012
I have a sheet that has columns from A to BS, and the column headers start in Row two.
I need to 1st filter the data by Column E where the data in Column E should not contain a particular Value, like"Sleeve".
Then it needs to copy the Columns A,D,G, BN, BO, BP,BP,BR & BS.
And it needs to delete Rows 3 & 4 from the current sheet, before pasting it in a new sheet.
And at the bottom of the sheet it needs to give me a count of the rows and the month end date for each month.
View 1 Replies
View Related
Aug 4, 2014
I would like a macro which will copy range $A$1:$Z$1 and paste it as values into AA1:ZZ1.
Easy enough on the first run; but on the second, copy the same range $A$1:$Z$1 and paste it as values into AA2:ZZ2
third run into AA3:ZZ3, etc.
View 2 Replies
View Related
Aug 7, 2014
In sheet Model RC BOM I am trying to copy all the rows under Level 1 (row 3), including level 1, until it reaches the next Level 1 (row 537) (not including row 537), and paste those cells in next tab (BIW) starting at row 2. The next operation is to copy all rows under Level 1 (row 537), including level 1, until it reaches the next Level (row 827), not including row 537, and paste those cells in the next tab (Chassis) starting at row 2.
The challenge is that I cannot use the row numbering in sheet Model RC BOM as a reference for coding because the content will change every week.
View 5 Replies
View Related
Apr 28, 2014
What I have are dates in Column B with a lot of blank rows in between. For example: cell B2 has a date in it and then the next date would be on cell B54. I need a macro to copy cell B2 until it finds a new date (which is in cell B54) then copy the date in cell B54 until the next date again.. so on..
View 9 Replies
View Related
Jan 10, 2009
How can I copy a column (C6:C200) and paste it according to a cell value . If I have in a cell 5 it will paste column (C6:C200) five times .
View 7 Replies
View Related
Sep 4, 2006
I have a workbook with 2 - worksheets "DATA" and "LETTER".
The "DATA" sheet has columns "First Name" "Last Name" "Address"...etc.
The user can enter in either a "X" or a "x" in cells B6:B100 on the "DATA" worksheet.
After the user enters a X or x and hits the macro button I need it to copy certain cells from "DATA" worksheet to "LETTER" worksheet. I have listed a example below.
In this example if a "X" or "x" is entered into B6 on "DATA" worksheet and the macro button is hit, then: ....
View 9 Replies
View Related
Oct 28, 2009
I am looking for is a basic macro that will copy and paste cells down as per number of entries or rows in a particular column
As an example, lets say my static data runs in Column A, from A1 : A10.
Cells B1 through to E1 each contain a seperate formula
How would I get the range B1:E1 to be copied and pasted a number of times that corresponds to the last entry in column A (in this case A10) ?
ie VBA code that recognises that the entries end at A10 and that the range B"#":E"#" must be copied and pasted down until the last entry in Column A
View 3 Replies
View Related