I would like a macro which will copy range $A$1:$Z$1 and paste it as values into AA1:ZZ1.
Easy enough on the first run; but on the second, copy the same range $A$1:$Z$1 and paste it as values into AA2:ZZ2
third run into AA3:ZZ3, etc.
I have one workbook that needs two macros.
On the "Complete Backlog" tab of my workbook, I want users to enter in the requested information based on the column header. Then I would like a Macro attached to a button that says "Refresh" that the user would click after they have entered in all of the information. This macro should look in Column M (WIP Status) and if any of the cells say "Close", it should Cut the entire row from the spreadsheet(Ex. A2:M2) and Paste it into the speadsheet titled "Closed Jobs".
This is so that as jobs are closed/finished, they are removed and stored on a separate sheet. The items would have to be pasted so that it pastes into the next available row - not just on top of each other.
I also need another macro that i can put into a button that doesn't "delete" a row from the sheet, but just copies over to another sheet - so that there are two instances in the workbook.
If would look something like: If a cell in "Column G / Director" of the "Complete Backlog" speadsheet is equal to "Snodgress" then copy columns A-L of the same row to the spreadsheet titled "Snodgress" - of course skipping down the rows to the next blank row.
.....is equal to "Herr" copy row to "Herr" spreadsheet.
....is equal to "McCormick" copy row to "McCormick" spreadsheet.
and so on.
I need to build a macro which copies 3 rows every day and pastes the row data into an identical sheet. The three rows will have column "D" as =today(). As the days progress the three rows will change accordingly ( tag to the today's date)
e.g. 28/1/2014
28/1/2014
28/1/2014
I need the macro to recognize the date when pressed and copy the corresponding rows of data and paste them into an identical sheet with the same date. The second sheet is an archive sheet. The date will tick over as per the calendar.
I need to copy and paste 4 rows individually under each of the 500 rows.
View 12 Replies View RelatedIn sheet Model RC BOM I am trying to copy all the rows under Level 1 (row 3), including level 1, until it reaches the next Level 1 (row 537) (not including row 537), and paste those cells in next tab (BIW) starting at row 2. The next operation is to copy all rows under Level 1 (row 537), including level 1, until it reaches the next Level (row 827), not including row 537, and paste those cells in the next tab (Chassis) starting at row 2.
The challenge is that I cannot use the row numbering in sheet Model RC BOM as a reference for coding because the content will change every week.
The number of rows in my spreadsheet will change. I am creating a Macro to insert a column and enter a formula in the second cell of the new column. I need to copy that formula down through that column to the last row, but don't know how many rows there might be that day.
View 2 Replies View RelatedWhat I have are dates in Column B with a lot of blank rows in between. For example: cell B2 has a date in it and then the next date would be on cell B54. I need a macro to copy cell B2 until it finds a new date (which is in cell B54) then copy the date in cell B54 until the next date again.. so on..
View 9 Replies View RelatedI am looking for is a basic macro that will copy and paste cells down as per number of entries or rows in a particular column
As an example, lets say my static data runs in Column A, from A1 : A10.
Cells B1 through to E1 each contain a seperate formula
How would I get the range B1:E1 to be copied and pasted a number of times that corresponds to the last entry in column A (in this case A10) ?
ie VBA code that recognises that the entries end at A10 and that the range B"#":E"#" must be copied and pasted down until the last entry in Column A
Sheet 2 has 3 cells with values:
C14, C15, C16
I need VB code to:
copy the values in those cells
Return to Sheet 1, let the user click a cell in any row in Colum F, then Paste them (Special, Values and Transpose)
I'm trying to get a macro together that will take a set of workbooks that I've merged (using Ron de Bruin's RDBMerge add-in) and transpose all columns from B to HB into rows. Now, I know that each spreadsheet is 210 columns and 244 rows large and they are concatenated on one another. Attached is a brief example of what I am trying to go from and what I am trying to get to.
View 1 Replies View RelatedI am working on a macro where I am creating a formula to string together some text columns and then copy the formula down the entire column. The data source I will be performing this on will change in number of rows period to period. The data would be in columns A,B & C and the formula is in D. The formula in D is stringing together the data in AB & C and then I want to copy and paste that formula down to the bottom of all of the data. What would the code be for the copy and paste with variable rows?
I want to create a macro that will copy and paste a couple seperate collumns but the problem is that each month, and each invoice, contain a different amount of rows so I can't "record" a macro. Lets say I start on A4 which is the heading of Column D..below it are a bunch of records at the end of the records is a space. I need it to stop there. Then do the same for Column G, I, etc. I would like it to copy each column and paste in a new workbook.
View 9 Replies View RelatedCan a macro make a workbook everytime you copy, it will paste special formulas only and skip blank rows? And can I still let me select the range manually? I would like to use this to link workbooks.
View 2 Replies View RelatedI have a macro that would check data in Column A and validate if a particular number is repeating, then for that number go to column B, Take the Values from there go to a new sheet and paste the values in a row.
CurrencyDateRef CodeIDAccountAmountDes.USD07152011XDVU4315210.4200.C5001.USD-18,606,772.190Distr Payable 07152011USD07152011XDVU4315210.4200.C5002.USD-111,131.450Distr Payable 07152011USD07152011XDVU4315420.4240.C5001.USD18,606,772.190Distr Payable 07152011USD07152011XDVU4315420.4240.C5002.USD111,131.450Distr Payable 07152011
I get the data in the below format
CurrencyDateRef CodeIDAccountAccountAmountDes.USD07152011XDVU4315210.4200.C5001.USD420.4240.C5001.USD-18,606,772.190Distr Payable 07152011USD07152011XDVU4315210.4200.C5002.USD420.4240.C5002.USD-111,131.450Distr Payable 07152011
I need to the macro to get the data not from the second cell.
Below is my macro
Sub test()
Dim idRange As Range, c As Range
Dim uniqueID As String
Dim destSht As Worksheet, sourceSheet As Worksheet
Dim r As Long
Dim i As Integer
Dim map As Object, key, item
[code]....
I have about 10 rows of data that have columns of information describing computer hardware and pricing. There are 10 rows, because each row represents a different country and different tax rates and pricing changes per country. So each column of a row has a specific formula to calculate information for that row's country information. All these 10 rows of formulas are kept as a reference at the bottom of the sheet.
At the top of the sheet I need to have a drop down menu to choose a country and then it will automatically copy and paste the row of that country to the current row at the top.
Is there any easy copy/paste macro for such a thing?
I have data from (row 1, column 1) to (row 53, column 5) on 283 consecutive worksheets in a singular excel file that I would like to be presented on a singular worksheet starting from the data on worksheet 1 and descending to the data on worksheet 283.
I am looking for a copy and paste loop solution that will copy the data from each page and sequentially paste the results on a singular output page in descending order (worksheet 1 data, worksheet 2 data... etc) so that I can sort the data.
I have an Excel worksheet (ver.2003) containing data more than 5000 rows. I need to run a macro everyday to do copy a value for that cell each day from another cell in different respective rows :
Using # as a marker in a specific col (say col X2, X14, X27, X43 and so on ) I want to copy value from another cell (AE2, AE14, AE27, AE43 and so on) containing a forumla and paste as a value to a cell say B4 in a row of fixed range (say B4:V4, B16:V16 and so on), which is two rows below the marker. The value to be copied is located in the 7th cell (say AE2) to the right of the marker cell (X2). If first cell is blank (say B4) then I copy data into the first cell. Every time I run the macro the value should be copied to next blank cell in that row (C4, D4 and so on).
I need to run the macro everyday for a specified no. of days say 21 working days in a month, which is the length of the range) copy the value for each in different rows as explained above. What is the VB Excel macro for this? ...
I am working on two worksheets. On my first worksheet I have one column with consecutive numbering starting from Cell 8.
A8 = 1
A9 = 2
A10 = 3
A11 = 4
A12 = 5
On my second worksheet I want to link to the values in the first worksheet but not in a consecutive manner. Each number will have an interval of 15 cells. As shown below:
D15 = 'link on Sheet1!A8'
D30 = 'link on Sheet1!A9'
D45 = 'link on Sheet1!A10'
D60 = 'link on Sheet1!A11'
D75 = 'link on Sheet1!A12'
I am new to macro and just trying to learn. I have a spreadsheet with 20000 rows and 8 columns. I am trying to identify equal rows based on the values of columns C, D, E and F. then I need to separate equal bunches with a blank row. Then I need to copy the ID number from the first cell of column B of each bunch and paste it for the rest of the rows in that bunch. I have written the following code but this does not put the ID of the first cell in a bunch for the rest of the rows in that bunch.
[Code] .........
I would like to implement specific cell ranges from two specific worksheets each within 33 workbooks (which all have several tabs) into a summary page in a separate workbook.
The cell ranges are going across my spreadsheet in rows and I would like for them to transpose into a columns depending on the data which I have separated by catergory on the summary page. They are all on the same location in each workbook which is separated by country. The cell ranges are E26:P37 and I would like to transpose them and have them put below eachother without overwriting for my format on the summary page, how I can put this together in a macro?
col1 col2 col3
row1 A 1 a1
row2 data data data
row3 data data data
row4 data data data
row5 A 2 a1
row6 A 3 a1
row7 B 1 a1
I'm trying to do is set up a VBA code that will take lines lines 2-4, copy the rows and then paste them in new rows every other row for the rest of the document, so that it appears as...
col1 col2 col3
row1 A 1 a1
row2 data data data
row3 data data data
row4 data data data
row5 A 2 a1
row6 data data data
row7 data data data..............................
I want to copy and paste from one sheet to another based on column a using a macro copy button.
E.g. if column a value = apple then copy that row into the apple sheet.
I am currently working on a bid sheet for my company; the accounting department has new software and they need me to alter my spreadsheet to fit a format that is suitable to import into their system.
I will try to explain this as simple as possible (I have attached an example spreadsheet as well)
Sheet1: Estimate
Sheet2: Cost Code Import Sheet
I need to take the information from Sheet1 and have it converted to fit sheet2 and there are a few issues I'm having:
#1 I need the line items in column B on Sheet1 (B2,B3,B4) referenced on Sheet2 but every 4 rows (E2,E6,E10)
#2 Now that I have 3 blank rows between my line items, I need to reference the cost amounts in cells F2,G2,H2 (sheet1) onto sheet 2 (D3,D4,D5)
so far, I have been changing the reference in every cell, and I have hundreds of line items... I do not think I will maintain what little sanity I have left if I continue doing it this way
I'm currently using the below code to add the formula in each cell. Depending on the number of rows.
It's very slow (Range("aa2").Value returns 1060) which means 1k rows. I was thinking of doing copy and paste to speed up. But I do not want to fill the whole column U (Column 13) with the formula. Is there anyway to set the max to copy to?
like r2:rX
where X is Range("aa2").Value?
Private Sub CommandButton1_Click()
Dim nDb As Integer
intRow = 2
Range("aa2").Value = "=COUNTA(A:A)-1"
nDb = Range("aa2").Value
I want do copy a range and paste to a specific range. So if the copy selection is larger I don't want it to paste the rows that don't fit.
With this code it copy a range and paste even outside my given paste range.
VB:
Range("F33:H60").Select
Selection.Copy
Sheets("7211").Select
Range("F33:H40").Select
ActiveSheet.Paste
I have some code that uses a form so you can choose the folder that contains all the spreadsheets that I need to copy. My issue is I have about 20 spreadsheets, some have the tab labled M3 and others Sheet1. Next is each spreadsheet has a different amount of rows in them. My data will always start in cells B4:N4 but may 20, 100, 1000 rows long.
My code works but only copies the first four rows of the last sheet open.
Code:
Private Sub cmdbtnProcess_Click()
Check_Path
End Sub
Sub Check_Path()
If txtboxPath.Value = Empty Or txtboxFile.Value = Empty Then
[Code]...
I have Data in Row 1 beginning in Cell E1 then K1 (Every 6th Cell) About 300 Records with 5 Blanks between each one of them...
How would I get that Data In A5 Down Without the Blanks?
I have been trying to set up this macro to copy and paste rows where a tick box is checked. The macro needs to transfer the row A:H over to sheet 2 then insent the data acording to property title either A, B, C etc. into formated tables which then feed into a bar and pie chart. I have tried posting this question up in sections hoping that i could get the bits of code i need and then work out how to do the macro but I have had no luck since my VBA skills are poor. I have attached the file
Private Sub CommandButton1_Click()
Dim lRow As Long, lRow1 As Long, lRow2 As Long
Dim Target As Range
Dim vTemp As Variant
Dim WS2 As Worksheet
Set WS2 = Sheets("Sheet2")
lRow = WS2.UsedRange.Row + WS2.UsedRange.Rows.Count
For Each Target In Range("I1", Cells(Rows.Count, "I").End(xlUp).Address).SpecialCells(xlCellTypeConstants)
vTemp = Target.Value
If VarType(vTemp) = vbBoolean Then
If vTemp = True Then
vTemp = "*"
On Error Resume Next
vTemp = WorksheetFunction.Match(" Total*", Range("A" & Target.Row, "A" & Rows.Count), 0).....................
In column H I have dates from 1/1/2008 to 12/31/2013. What I would like to do is transfer that data to column J, but alternate it every other row and then insert the word Date into the blank cells. For instance J1 would read "Date" and then J2 would read 1/1/2008 J3 would be Date and J4 would be 1/2/2008. I have a large database and I tried to use array formulas and they slow it down to a crawl so I was working with DSUM, but I don't feel like wasting time with adding in Date manually.
View 8 Replies View RelatedI am trying to save me a lot of copy and pasting. I have cells A1:A100+ with customer names listed out. I am trying to create a chart on a different page but on this particular chart, i need those customer names at the top of the columns going across the page instead of the rows.
View 3 Replies View Related
