Macro To Fill Down Row?
Aug 3, 2014
I'm looking to create a macro, one where depending on which the active cell is, if I hit say Ctrl + Shift + D. The macro would fill down the row I selected one row, but there are certain columns I want it to fill down: I want it to Fill Down columns: A to E, G, I, K, M to P, R to T.
For example, my cursor is in cell N45, I want it to fill down row 45, but only columns A to E, G, I, K, M to P, R to T to row 45.
Can this be done. My testworkbook is attached.
View 9 Replies
ADVERTISEMENT
Dec 9, 2008
I have enclosed XLS sheet where you can see line [in highlighted] that a blank. I need a macro to search for such blank cells and fill it with the data on top of it, example A5 = 4, B5= blue, A12= 1 and B12=golden.
View 7 Replies
View Related
Nov 29, 2011
I need a macro to perform the following:
On column A, from row 2 to 22, I have on each cell, an equal to (=) formula which links the result from another sheet in the same work book.
I need a macro that begining on Column C, everytime the cells in Column A changes from 0 to a number, displays the number on column C and when cell in Column A goes back to 0, Column C retains the number. Next time Column A displays a new number, then Column D is filled, next number Column E and so on.
Example: Lets suppose that cell A2 shows 1234, then cell c2 will show 1234, once cell A2 goes back to 0, cell C2 remains 1234. Then when cell A2 shows a new number 5678, then cell D2 will display the new number 5678 and if A2 goes back to 0 cell D2 will retain the number 5678 and again, once cell A2 displays a new number 1589, then E2 will display 1589, etc, etc. This could happen as many as 20 times (up to column V) before erasing all columns and beginning all over again.
View 8 Replies
View Related
Apr 10, 2012
I have a row of data. The first few columns are given data, and then the next few columns are equations that use the first few columns of data.
The next row down adds the result of a few of the equations in the row above it to the given data, and the equations are calculated again.
It looks a bit like this:
1231437-111213-9
in the first row, 1 and 2 are just given. 3 is just 1+2 (a1+b1), and in the last column, 1 is just 2-1 (b1-a1). In the second row, A2 is A1+C1, and B2 is just B1+D1, C2 and D2 are the same calcs as C1 and D2.
This row is then filled down.
What I would like to do, is just calculate what the first two columns of data are by just entering the number of cycles id like to make, instead of filling down the row.
For example, I would like to just enter N=3 in a cell, and it returns 11 and 2. Or N = 1000 and it would give me whatever the first two values are if i had filled the row down 1000 rows.
View 2 Replies
View Related
Jun 3, 2014
my macro filling down the data properly. I have a table wit headers set up. My macro selects two cells in the first row, and tries to copy it down into the other rows of the table. Instead what happens, the macro copies down the table headers into the two cells that are selected. Here is my code.
Range("I3").Select
ActiveCell.FormulaR1C1 = "Order Filled"
Range("J3").Select
ActiveCell.FormulaR1C1 = "Order FIlled"
Range("I3:J3").Select
Selection.FillDown
View 3 Replies
View Related
Jan 8, 2009
I am looking for a Macro to fill in a formula in each row where there is a value. So if there is a value in row 1 Column A then place this formula into Column B and continue down the sheet untill there is not a value in Column A.
View 9 Replies
View Related
Sep 14, 2009
my macro simply activates a cell and all i want it to do is to auto fill downwards!
its intended to autofill down for about 100 rows but just cant figure it out!
but keep in mind the cell is always going to change so it cant be fixed
i.e this wont work:
Selection.AutoFill Destination:=Range("C95:C659")
Range("C95:C659").Select
ActiveWindow.SmallScroll Down:=513
because i need it to be autofilled from the CURRENT active cell only!
View 9 Replies
View Related
Jul 1, 2006
I've recorded a macro where I have selected two adjoining cells in Row-9. I double-clicked at the cells to fill-down the formulas to the end of the range. However, the macro recorded: Selection.AutoFill Destination:=Range("H9:I152")
Of course, I will be adding and deleting rows from this worksheet. The next time I run the macro my range may only be to row 80 or it may be up to 200. How can I make the macro dynamic, so the AutoFill goes from H9 to "the end of the range"?
View 2 Replies
View Related
Apr 14, 2007
I need a macro that is able to fill down data in a selection. For example, in “A5” I have “BB Total” in “A8” I have “CV Total” and in “A13” I have “GH Total”. I need a macro that will take A5 and fill it down to A7, then take A8 and fill it down to A12, then take A13 and fill it down to the next one, and so on. I attached an example. Sheet one is unfinished and Sheet two is finished. I want to be able to select the data the macro runs on. I highlighted in Yellow what I would like to be able to select before I run the macro.
View 3 Replies
View Related
May 6, 2014
I'm using 3 sheets within one Excel file. 1st sheet (target) is called Offer, the 2nd one (source) is called Stock and there's a 3rd one that only contains a button to which i'll assign the final macro. Now, back to it.
I need to copy from Stock to Offer contents of the entire column (basically there are a few more in Offer, so i need to copy each one and place it in a different part). I need to copy from ROW 2 and paste in ROW 6. The length of the document varies, as it's connected to the database (now i can have 3800 rows, in the next hour 3765). Previously i just added an X to row 4500 ( i don't expect to EVER have more than 4000 lines) and just copied from 2 to 4499
Second issue is, on the Offer sheet i have to fill a column with a certain value. Again, it needs to start from Row 6, and needs to be as long as the adjacent column. To get a better idea, i have for example 3800 price lines, so i need the column next to it to be filled with 3800 rows saying GBP (this will be a fixed value).
Also, none of the codes above should exclude blank cells in the middle of the string. Last thing, seems some of the barcodes i have only have 12 digits, so i'll need to add a 0 in front of all shorter numbers to go up to 13 digits.
[Code] ......
I should be able to figure the rest by recording bits and pieces. The Save part is done already, i'm using
[Code] ....
I needed it in XLSX format, not XLSM so that suits just fine. I might need to add hour and minute as well but i can sort it out (as i said, i can do some stuff on my own but this one got me to the bottom).
View 2 Replies
View Related
May 21, 2014
I need a macro that will insert this formula: =Trim(IF(B3="","",MID(B3&", "&B3,FIND(" ",B3)+1,LEN(B3)+1))) into column C starting on row three through the end of the spreadsheet information.
I typed this incorrectly when I first posted. I need it to fill down into only column C not the end of the spreadsheet.
View 14 Replies
View Related
Apr 27, 2009
What I need , is a macro to take data entered from "worksheet1" and fill in next row on a separate worksheet based upon salesman selected from cell C20 in "worksheet1" .
For the sample, I have just 3 saleman in a dropdown list and have labeled worksheets accordingly. If i could get help with say just using info from cells C6,c7 and e6 from "worksheet1" and put it where it goes.
c6 last name is row b on data sheet
c7 first name is row c
e6 trade year is row o
I should be able to work out the rest.
View 4 Replies
View Related
May 17, 2013
I am having some issues with my macro. I keep getting a syntax error? I am trying to combine these coding combinations together. Code G0398 with 95800, code G0398 with 95801 so on so fourth..
G0398
95800
G0399
95801
G0400
95805
[Code] ...........
View 2 Replies
View Related
Jul 25, 2007
Col D has list of order #'s, starting in row 9. Col M is for COMMENTS about each order. Order #'s can appear in Col D more than once.
What I am looking for is a macro that will automatically detect if I have entered a new COMMENT in Col M, recognise the order # in adjacent Col D, and put my new comment in other cells in Col M if the SAME ORDER # is referenced in adjacent Col D.
Example:
worksheet starts with:
Col D Col M
1234 x
123 xyz
1234 zyx
4321 zyx
321 y
1234 yz
If I type the letter "Q" into Col M in a row adjacent to order # 1234, the result should be:
Col D Col M
1234 Q
123 xyz
1234 Q
4321 zyx
321 y
1234 Q
I think I would need to put this macro into a Worksheet Change event but beyond that I do not know what I need. UDF? Macro?
View 9 Replies
View Related
Jan 16, 2009
I have been helping a friend keep track of his clients, by making a form for them to fill out when they become a client of his (he owns a care rental) and I made a spread sheet for him to keep track of which cars are out when...
With that said, I would really like to have a Macro that i could run, when the form with all the personal information about hte client had been filled out - take that information and pull it over into another spead sheet that keeps track of all clients.
Meaning that workbook 1 is set up as a booking form and workbook two is just a normal list. I can make a macro that pulls over the infomation - but the problem is that it will always pull the information into row 1. Meaning that it overwrites itself each time I run it. I would like the Macro to know that it has to fill the information into the next empty row.
View 9 Replies
View Related
Jun 6, 2006
Let's say I have data from column A up to column J.
Columns M, N, O contain formulas which calculate value from column J. Since this sheet is a template, the number of rows of data vary from month to month, i.e. the amount of records I copy and paste to columns A-J vary.
I would like to have a macro which will fill down the formulas in columns M, N and O as many as there is data in column J. Example: Let's say minimum number of row is 100, so up to row 100, column J already contains formulas. But if the following month the number of rows is 150, I would like the macro to automatically fill down the formulas in columns M, N and O up to row 150. But if the following month, there is only 130 rows, the macro should fill down to row 130 only.
View 4 Replies
View Related
Oct 11, 2006
i have a userform named: usf_History.
i would like to refresh all the text boxes (they either refer to cells or are calculations)...?
View 6 Replies
View Related
Nov 29, 2006
I wonder if soeone could change the following macro so that the bottomcell
is set to be as far down as there is content in Column "A". As it stands if I fill in blank cells in Column "C" and the last cell with data is say C10 it does just this. But if the actual last row with data in column "A" is A14 then cells C11, C12, C13, and C14 are ignored. C11, C12, C13, and C14 should be the same as C10 above them.
Sub FillBlankCells()
Dim topcell As Range, bottomcell As Range
Set topcell = Cells(1, ActiveCell.Column)
Set bottomcell = Cells(16384, ActiveCell.Column)
If IsEmpty(topcell) Then Set topcell = topcell.End(xlDown)
If IsEmpty(bottomcell) Then Set bottomcell = bottomcell.End(xlUp).Offset
Range(topcell, bottomcell).Select
Selection.SpecialCells(xlBlanks).Select
Selection.FormulaR1C1 = "=R[-1]C"
End Sub
Other macros recognize the actual last row.... but have issues with columns formatted as Text. The macro above doesn't create problems with columns formatted as "Text".
View 3 Replies
View Related
Jun 12, 2008
I have written a macro that creates a new spreadsheet and copies text into it. The number of rows varies depending on the input.
Yet, running the macro results in a sheet with the max rows (65k+). This is unmangeable, as it makes it a huge file and size and harder to print.
I only want there to be the number of rows that have text in them.
The larger problem is how these were even created in the first place. Currently:
' Formula for Job Name
Range("A2").Select
ActiveCell.FormulaR1C1 = "=LEFT(RC[12],8)"
' Fill Job Name
Range("A2").Select
Selection.AutoFill Destination:=Range("A2", Cells(Rows.Count, "A")), Type:=xlFillDefault
View 3 Replies
View Related
Sep 17, 2013
I am trying to create a macro that will automatically fill in the days for a user if they fix the date. That is my end-goal, but obviously I have to take it step by step.
My first complication is how can I fill in all of the day rectangle boxes automatically? I was trying to create a macro for it, but it would only change the very first box. (You can see from my sheet, the days go 3 then 2)
After that I want to try and have constant-macro where if they change the month and the year it will automatically update the calendar for the user.
View 5 Replies
View Related
Jan 14, 2009
I have a startdate F1 and an end date G1. Is there a macro that can list all dates by day within that range into column I7:down.
View 9 Replies
View Related
Jul 30, 2012
how to auto fill of same value in different cells in a row?
For Example:
A1 D1 E1 G1 K1
10 10 10 10 10
like that when i hit a macro button the values in the A1 D1 E1 G1 K1 must fill with A2 D2 E2 G2 K2
View 1 Replies
View Related
Sep 20, 2012
I have some information in a column where I have different types of references in each cell with some blank cells in between. I am trying to write a macro that will go down the column until it gets to a cell containing the reference "THIS PAYMENTS" and then copy that cell reference down until it reaches a cell containing "Y-T-D AMOUNTS".But I want the loop to carry on until it reaches another cell containing THIS PAYMENTS.I want this to repeat for about 3000 rows See here before and after result.
Before
After
PERIOD
PERIOD
[Code]....
View 1 Replies
View Related
Dec 22, 2005
Would like a script that will go to each sheet in the workbook, and fill in light grey background, each alternate row that contains data, EXCLUDING the 1st row (header row).
View 9 Replies
View Related
Apr 25, 2007
I have a sheet where a user will enter x number of rows of data.
im trying to get it so that the macro, when run, will goto the last row of Data in Colum A, and delete all rows BELOW to the end.
then select the first empty row and do the following
in A =SUM(A30:A last row of data above this one)
in B ='HASH TOTAL'
in D ='TOTAL
in E = same as A but for colum E
in F = same as A but for Colum F
in K =same as A but for Colum k
in J =same as A but for Colum J
then select the row below that one and from cells A:M
and format
With Selection.Interior
.Pattern = xlCrissCross
.PatternColorIndex = xlAutomatic
.ColorIndex = xlAutomatic
.TintAndShade = 0
.PatternTintAndShade = 0
End With
View 9 Replies
View Related
Jun 25, 2007
How do I have the marco delete rows if the O column = a certain cell.
For instance my O column has a bunch of colors
Cell N1 list one color (red) and I want the macro to delete the rows that contain the color from N1 in column "O".
View 9 Replies
View Related
Apr 2, 2009
I need a macro to fill any cell in any column with red color. The same cell should also have red fonts with word 'RED' typed in the cell, so that word 'RED' is invisible.
View 9 Replies
View Related
Nov 21, 2007
I want my column to be populated by formula using VBA. Let's say on row1, the formula is = SUMIF(mysheet!$L:$L,$A1&C$1&"09",mysheet!$M:$M). And on row 2, the formula is
=SUMIF(mysheet!$L:$L,$A2&C$1&"09",mysheet!$M:$M). And on row 3, the formula is =SUMIF(mysheet!$L:$L,$A3&C$1&"09",mysheet!$M:$M). And this is done up to the last row. How do I do this?
View 9 Replies
View Related
Mar 13, 2008
I want a Macro to be able to copy a formula down from cell A2 down the entire column within the data range. But, the problem I've got is that the spreadsheets I'll be using the Macro on will be different sizes. Currently, the VBA looks like this:
ActiveCell.FormulaR1C1 = "= LOWER(RC[3])"
Range("A2").Select
Selection.AutoFill Destination:=Range("A2:A17340"), Type:=xlFillDefault
Range("A2").Select
So the "Destination:=Range("A2:A17340")" part copies the formula into all cells from A2 to A17340. Other spreadsheets might only have data up to cell A200, or Awhatever - is there a way of getting the macro to populate just the cells in column A but only where there is data adjacent in other columns?
Also, I want the Macro to be able to delete all rows wherever "DELETE" appears in a certain column - I had a look at the "Delete Entire Row Based on Criteria" Macro but I'm looking for a fully automated solution, rather than the question boxes coming up and asking which cell/criteria, I need to run this macro on multiple sheets and the criteria/column position will always be the same -
View 7 Replies
View Related
Apr 29, 2008
I'm working on some macros to fill and file paperwork from an IBM Reflection based system into an Excel spreadsheet. Here's the code I've written so far:
Private Sub cmdSend_Click()
Dim ExcelObj As Object
Dim ExcelWasNotRunning As Boolean
On Error Resume Next
Set ExcelObj = GetObject(, "Excel.Application")
If Err.Number <> 0 Then ExcelWasNotRunning = True
Err.Clear
DetectExcel
If optObligation = True Then
Set ExcelObj = GetObject("S:PublicVisual Basic FormsExcel FormsObligation.xls")
Else..............
The problem I'm running into is that the data isn't loading the first time through. The spreadsheet opens, nothing happens, Excel closes. If I attempt to run the macro again without closing the form and clearing all the variables it runs perfectly as many times as I want to run it (which isn't terribly useful, because I'm stuck putting the same data into the form over and over again). If I unload the form then I get the same problem: first run, no data transfered.
View 6 Replies
View Related
