What I need , is a macro to take data entered from "worksheet1" and fill in next row on a separate worksheet based upon salesman selected from cell C20 in "worksheet1" .
For the sample, I have just 3 saleman in a dropdown list and have labeled worksheets accordingly. If i could get help with say just using info from cells C6,c7 and e6 from "worksheet1" and put it where it goes.
c6 last name is row b on data sheet
c7 first name is row c
e6 trade year is row o
Each petition can generate several tasks, one line per task.
John Doe | XXXX-YYYY | NCO John Doe | | RIL John Doe | XERT-WWWW | RMT Jane Doe | QSZE-AQWC | RIL
On the second worksheet:
Complete list of agents | number of petitions | Status
John Doe | 2 | OK Jane Doe | 1 | [BLANK]
I want to be able to fill in the second worksheet automatically. For each agent in my worksheet 2, I want to check if they appear in worksheet 1 and if so count the number of petitions related.
I have enclosed XLS sheet where you can see line [in highlighted] that a blank. I need a macro to search for such blank cells and fill it with the data on top of it, example A5 = 4, B5= blue, A12= 1 and B12=golden.
I need a macro that is able to fill down data in a selection. For example, in “A5” I have “BB Total” in “A8” I have “CV Total” and in “A13” I have “GH Total”. I need a macro that will take A5 and fill it down to A7, then take A8 and fill it down to A12, then take A13 and fill it down to the next one, and so on. I attached an example. Sheet one is unfinished and Sheet two is finished. I want to be able to select the data the macro runs on. I highlighted in Yellow what I would like to be able to select before I run the macro.
Let's say I have data from column A up to column J.
Columns M, N, O contain formulas which calculate value from column J. Since this sheet is a template, the number of rows of data vary from month to month, i.e. the amount of records I copy and paste to columns A-J vary.
I would like to have a macro which will fill down the formulas in columns M, N and O as many as there is data in column J. Example: Let's say minimum number of row is 100, so up to row 100, column J already contains formulas. But if the following month the number of rows is 150, I would like the macro to automatically fill down the formulas in columns M, N and O up to row 150. But if the following month, there is only 130 rows, the macro should fill down to row 130 only.
I have a sheet where a user will enter x number of rows of data.
im trying to get it so that the macro, when run, will goto the last row of Data in Colum A, and delete all rows BELOW to the end. then select the first empty row and do the following
in A =SUM(A30:A last row of data above this one) in B ='HASH TOTAL' in D ='TOTAL in E = same as A but for colum E in F = same as A but for Colum F in K =same as A but for Colum k in J =same as A but for Colum J
then select the row below that one and from cells A:M and format With Selection.Interior .Pattern = xlCrissCross .PatternColorIndex = xlAutomatic .ColorIndex = xlAutomatic .TintAndShade = 0 .PatternTintAndShade = 0 End With
regards the two attached files (both are identical) except '1' has TWO Rows of data above the Macro Button and works correctly whereas '2' has only ONE Row (the desired option but does not work correctly!( Inserts Row in wrong place and incorrectly fill series)).
basically the program inserts a additional row below the last data entered, copies a formula cell from above and finally (the problem area) Series Fills a cell from data above.
I have a small challenge, where I am trying to fill blank cells with the data from the last populated cell above.
However, I need it to be able to automatically recognise when a manual entry has beed actioned down the column and recalculate for below that cell with the new data.
The data in the cell is selected from a drop down. I want it to populate all the cells below, until the next drop down is selected. And automatically repopulate them all when it is selected.
E.g. Cell C8 has the value "DATA" selected, and everything below is autofilled with "DATA", but when I select cell C12 with different drop down list value "VALUE", all the cells below stay as "DATA" because they are obviously no longer blank.
What I need if C9 - C11 to remain filled with 'DATA" and from C13 to auto fill with the newly selected value "VALUE".
Need this to happen for as many rows and data selections from the drop down as needed (endless).
I have used:
Code: Sub FillEmpty() Application.ScreenUpdating = False Application.Calculation = xlManual Dim cell As Range For Each cell In Intersect(Selection, _ ActiveSheet.UsedRange) If Trim(cell) = "" And cell.Row > 1 Then cell.NumberFormat = cell.Offset(-1, 0).NumberFormat cell.Value = cell.Offset(-1, 0).Value End If Next cell Application.Calculation = xlAutomatic 'xlCalculationAutomatic Application.ScreenUpdating = False End Sub
which does the auto fill, but won't change the cells below once one of them has been updated.
Info:
Drop down list has 31 possible selections at the moment
Starts at Cell C8
Needs to be flexible enough to add an indeterminate number of rows, and additional items to the drop down selection.
I am using the following code to find a NAME in my work sheet and to enter their status. But this macro is not compatible if a duplicate or Similar name exist.What I need is I need this macro to activate the search NAME Cell and then a VB box with OK & NEXT button has to appear. if the activated NAME is exactly the one I am searching, then I will click the OK button then it should display the "Enter Employee Status" box and as continue in my code, But If I press NEXT, the macro should search the next similar NAME and activate it, This process should continue until I click the OK button. (Same like CTRL+F function with an additional Status entry button)
Code: Sub Button1848_Click() Application.ScreenUpdating =False Dim BeginCol AsLong
Here is the above link. Am looking at a button which saves whatever is the temp worksheet row in the customers worksheet. The temp worksheet basically takes the data from the Quotations worksheet and places it in a row.
I have been working on a macro that compares a existing list of data to an updated list of data and then either moves any data not on the new list over to a completed tab (followed by deleting the record on the existing sheet), and then adds any items not on the existing sheet, but which appear on the new list, to the existing list.
I have come across a stumbling block, i have managed to identify on the existing list the rows of data that have been removed from the new list and therefore need to be moved over to the completed tab, but when i select the data it selects the header row aswell (which will always remain the same row). Obviously this then pastes the header row aswell, and also i can't seem to get it to paste in the new sheet to the next available row (i.e this will be used daily and i don't won't to overwrite the infor already in the completed tab). the next issue i have is then when i go back to existing sheet to delete the data i just copied across, as the header was initially select this also gets deleted.
The code below, is the complete code, including filtering, copying some forumals etc. The area i am getting stuck on is highlighted in red:
Sub Update() Dim bottomrow As Long Dim My_Range As Range bottomrow = Cells(Rows.Count, "C").End(xlUp).Row Set My_Range = Range("A1:Y" & bottomrow)
I have a worksheet with 40 colums and 9200 rows. There are columns with empty data in the rows. Can I have a macro to copy data in the rows in Column E, F, I, J K and L to empty rows below?
I want to input a column of formulas where the part of the formula which changes on each row from the row above is the worksheet name. I want the cell ref to remain the same
ie
formula in B6 ='WC - 23-03-09'!J2
formula in B7 ='WC - 30-03-09'!J2
The sequence of the worksheets should follow the sequence as they appear left to right in the worksheet bar at the bottom of the page.
I was looking for a way to "fill" in the rest of the column where its the worksheet which changes sequentially in the formula rather than the cell ref
How can i fill my combo with the values i have stored on myarray?
Code: Sub help() Dim x As Single Dim myarray() myarray = Array("QQ", "BBBB", "CCCC", "QWERTY", "ASDFG", "ZXCVB") Dim Combob As OLEObject Set Combo = ActiveSheet.OLEObjects("Combo1")'dropdown("combo1")
I can easily put a listbox into a spreadsheet and fill it with a rage of data from a sheet, however I am looking to create 2 listboxes where one will be filled with hidden spreadsheets within the workbook and the other with non hidden, to give the user the ability to move one from the other. The problem I am having is that I do not know how to call these created listboxes from in VBA. I can easily acheive this in useforms but would prefer it to be in the spreadsheet as I already have a number of userforms that fill data in a large number of spreadsheets that I want to hidden initially.
I have a form created, were the user can select up to three pairs of open worksheets for sheet subtraction, to see where Im going with, aka the big idea see here: Column Subtraction With Criteria Via Box & Produce Results In New Workbook
What I dont know how to do, is get the form in the attached workbook to show all the available worksheets. Specifically, from the dropdown combo box, I would like it to list all open worksheet title in all open workbooks.
I need a macro that will ask for a crew # and then select all the rows off another worksheet that contains that crew #. Then take the selected rows and copy them to the active worksheet for reporting.
I have one worksheet called WEEKS.xls which lists weeks 1 to 8, week1 being columns A,B,C, week2 being D,E,F, and so on up to week 8
I have another work sheet called supplier.xls which is a worksheet imported from a database. In this worksheet I have columns A to Q. I am only interested in the data in columns C, P & Q.
I have buttons along the top in the WEEKS.xls sheet, one for eack week. On week one when the button is clicked I would like a macro that would look in folder “Supplier Stock” for the worksheet suppliers.xls and then take the data from columns C,P,Q and paste them into the WEEKS.xls in columns A,B,C. On week 2 the data will be pasted into D,E,F and so on. On the supplier.xls there is a few gaps down the sheet , like row 15 & 16 and alo 19 & 20 if possible I don’t want the gaps in the WEEKS.xls. Also on column P it is a date format I would like that pasted into the WEEKS.XLS in a dd/mm/yy format
I have about 600 patients' charts, which I audit every 3-6 months. I have created a macro which imports each patient's workbook into a single workbook (one worksheet per patient). Now I'm trying to create a macro which will import each patient's most recent audit results onto one worksheet. Here's how the results are organized:
2/1/2010 Audit 3/1/2010 Audit 4/1/2010 Audit Y N N/A Y N N/A Y N N/A x x x x x x
...etc., with each audit taking up 3 columns and 32 rows. My code, however, is not working,
I'd like to create a macro such that when a person's name is typed in a cell, a separate set of cells populates with data pulled from a worksheet containing the person's data.
So, for example, I have created a scorecard template. Rather than have 50+ scorecards for each individual, I'd like to have one template upon which the individual's respective data can be pulled into the appropriate cells based on the name entered in another cell on the template (or a pop up in which the name is entered).
I have a workbook that has a master data sheet which is used daily to import data. I also have worksheets named: 1, 2, 3, etc. based on the day of the month.
I have been manually pasted the master data for a particular day onto that corresponding numbered worksheet.
I was thinking of taking the date and and separating it using the deliminated feature then somehow looking at the day of the month and tell it to paste to that same worksheet number.
I want to create a spreadsheet table of values that are linked other spreadsheets, a condesnsed version... I am not a total amateur and I understand the world of excel links....
However the problem lies in the fact that the source files change format every day, what i need is a formula for each cell (i know...) that can:
1. Firstly find column and row heading titles by looking for part of the title i.e. for a title like 'Occupation' i need a non case sensitive search for 'Occu'.
2. Once colum and row are found, return the intesecting value.
The formulas are needed so all I will have to do, after this is finished, is update the source files and the relevant numbers will be found automatically.
Im sure this is something that can be done with a clever array formula, setup to recognise column and row intersections based on positve returns on search variables, however this one is just outside my capabilities....
Hi if possible can someone please tell me how u populate a list box with three columns i want 1st col "A12:A209" 2nd col "B12:B209" 3rd Col "D12:D209" shown in it. Ive tried everything i can think of and cant get it to work
As a simple example, I have three columns (A,B,C). In both Column A and B they have single word text in them, but in Column C it is a paragraph of words that I format the cells to 'fill' so that it is all tight and concise when viewing the worksheet. Afer I have saved the document and have closed it when I reopen the document. Cells from column C have randomly duplicated themselfs throughout the entire worksheet,but only onto columns A,B,C (where there is pre-existing text). As the random cells get duplicated it overrights the original text (results) as it does it, so once I open up a document and see this it is to late. this is a continual problem that I cant find a resolution for.
I am working on a complicated macro. The macro is suppose to move certain data set to a specific worksheet if an if statement is "True."
As of now the macro, inserts the row into a new sheet but it is inserted into Row 1. My data set is in Sheet A is up to Column U and I want it to be inserted in Column B on Sheet B. The code below inserts the entire row into Sheet B starting with column a.
[Code] ........
This variation of the code moves the entire data set from Sheet A to Sheet B and inserts it in Column B as wanted, but it does NOT follow the Criteria of "true", it brings the entire data set even those with "False".
I am trying to create a macro for vlookup. Each time the name of the source file changes. I dont want to update the formula everytime. So Iam trying to do a macro which will fetch the data from the file that the user mentions in the sheet2.
I have attached the source file and the VLookup file. Now when I enter the source file path in sheet 2 of workbook "Vlookup", and then if I run the macro it should open the file and put the dates in Sheet1 (Columns "D" and "E") of workbook "Vlookup". The dates in the source file will be available in sheet 1(column F and H) of that workbook.
I created a macro for data segregation and extraction.
My currently flow is:create new worksheets rename the worksheets to e.g., sheet1 to product1, sheet2 to product2, etc manually filter the main data sheet, copy and paste the data into the respective sheets.
How to i edit the codes to allow the renaming of the worksheets to be non-static?
Meaning it doesn't have to be sheet1 to product1, sheet2 to product2
I can have sheet3 to product1, sheet4 to product2 or sheet7 to product1, sheet8 to product2
I feel that my method of data segregation and extraction is kind of rigid. is there any methods i can make it to be more fluid/dynamic?
I need a macro to copy data from "sheet1" "sheet2" "sheet3" / column E and F to the worksheet "final". The number of rows in "sheet1", "sheet2", "sheet3" etc. is variable.
