I have enclosed XLS sheet where you can see line [in highlighted] that a blank. I need a macro to search for such blank cells and fill it with the data on top of it, example A5 = 4, B5= blue, A12= 1 and B12=golden.
View 7 RepliesI need a macro that is able to fill down data in a selection. For example, in “A5” I have “BB Total” in “A8” I have “CV Total” and in “A13” I have “GH Total”. I need a macro that will take A5 and fill it down to A7, then take A8 and fill it down to A12, then take A13 and fill it down to the next one, and so on. I attached an example. Sheet one is unfinished and Sheet two is finished. I want to be able to select the data the macro runs on. I highlighted in Yellow what I would like to be able to select before I run the macro.
View 3 Replies View RelatedWhat I need , is a macro to take data entered from "worksheet1" and fill in next row on a separate worksheet based upon salesman selected from cell C20 in "worksheet1" .
For the sample, I have just 3 saleman in a dropdown list and have labeled worksheets accordingly. If i could get help with say just using info from cells C6,c7 and e6 from "worksheet1" and put it where it goes.
c6 last name is row b on data sheet
c7 first name is row c
e6 trade year is row o
I should be able to work out the rest.
Let's say I have data from column A up to column J.
Columns M, N, O contain formulas which calculate value from column J. Since this sheet is a template, the number of rows of data vary from month to month, i.e. the amount of records I copy and paste to columns A-J vary.
I would like to have a macro which will fill down the formulas in columns M, N and O as many as there is data in column J. Example: Let's say minimum number of row is 100, so up to row 100, column J already contains formulas. But if the following month the number of rows is 150, I would like the macro to automatically fill down the formulas in columns M, N and O up to row 150. But if the following month, there is only 130 rows, the macro should fill down to row 130 only.
I have a sheet where a user will enter x number of rows of data.
im trying to get it so that the macro, when run, will goto the last row of Data in Colum A, and delete all rows BELOW to the end.
then select the first empty row and do the following
in A =SUM(A30:A last row of data above this one)
in B ='HASH TOTAL'
in D ='TOTAL
in E = same as A but for colum E
in F = same as A but for Colum F
in K =same as A but for Colum k
in J =same as A but for Colum J
then select the row below that one and from cells A:M
and format
With Selection.Interior
.Pattern = xlCrissCross
.PatternColorIndex = xlAutomatic
.ColorIndex = xlAutomatic
.TintAndShade = 0
.PatternTintAndShade = 0
End With
regards the two attached files (both are identical) except '1' has TWO Rows of data above the Macro Button and works correctly whereas '2' has only ONE Row (the desired option but does not work correctly!( Inserts Row in wrong place and incorrectly fill series)).
basically the program inserts a additional row below the last data entered, copies a formula cell from above and finally (the problem area) Series Fills a cell from data above.
I have a small challenge, where I am trying to fill blank cells with the data from the last populated cell above.
However, I need it to be able to automatically recognise when a manual entry has beed actioned down the column and recalculate for below that cell with the new data.
The data in the cell is selected from a drop down. I want it to populate all the cells below, until the next drop down is selected. And automatically repopulate them all when it is selected.
E.g. Cell C8 has the value "DATA" selected, and everything below is autofilled with "DATA", but when I select cell C12 with different drop down list value "VALUE", all the cells below stay as "DATA" because they are obviously no longer blank.
What I need if C9 - C11 to remain filled with 'DATA" and from C13 to auto fill with the newly selected value "VALUE".
Need this to happen for as many rows and data selections from the drop down as needed (endless).
I have used:
Code:
Sub FillEmpty() Application.ScreenUpdating = False Application.Calculation = xlManual Dim cell As Range For Each cell In Intersect(Selection, _ ActiveSheet.UsedRange) If Trim(cell) = "" And cell.Row > 1 Then cell.NumberFormat = cell.Offset(-1, 0).NumberFormat cell.Value = cell.Offset(-1, 0).Value End If Next cell Application.Calculation = xlAutomatic 'xlCalculationAutomatic Application.ScreenUpdating = False End Sub
which does the auto fill, but won't change the cells below once one of them has been updated.
Info:
Drop down list has 31 possible selections at the moment
Starts at Cell C8
Needs to be flexible enough to add an indeterminate number of rows, and additional items to the drop down selection.
I am using the following code to find a NAME in my work sheet and to enter their status. But this macro is not compatible if a duplicate or Similar name exist.What I need is I need this macro to activate the search NAME Cell and then a VB box with OK & NEXT button has to appear. if the activated NAME is exactly the one I am searching, then I will click the OK button then it should display the "Enter Employee Status" box and as continue in my code, But If I press NEXT, the macro should search the next similar NAME and activate it, This process should continue until I click the OK button. (Same like CTRL+F function with an additional Status entry button)
Code:
Sub Button1848_Click()
Application.ScreenUpdating =False
Dim BeginCol AsLong
[Code]....
I have a worksheet with 40 colums and 9200 rows. There are columns with empty data in the rows. Can I have a macro to copy data in the rows in Column E, F, I, J K and L to empty rows below?
View 3 Replies View RelatedI want find the data in some rows that same with one or more cell and automatically fill the data. And for more details, I have attached the examp file (Examp.xls).Antoni
View 3 Replies View RelatedI'm looking to create a macro, one where depending on which the active cell is, if I hit say Ctrl + Shift + D. The macro would fill down the row I selected one row, but there are certain columns I want it to fill down: I want it to Fill Down columns: A to E, G, I, K, M to P, R to T.
For example, my cursor is in cell N45, I want it to fill down row 45, but only columns A to E, G, I, K, M to P, R to T to row 45.
Can this be done. My testworkbook is attached.
I need a macro to perform the following:
On column A, from row 2 to 22, I have on each cell, an equal to (=) formula which links the result from another sheet in the same work book.
I need a macro that begining on Column C, everytime the cells in Column A changes from 0 to a number, displays the number on column C and when cell in Column A goes back to 0, Column C retains the number. Next time Column A displays a new number, then Column D is filled, next number Column E and so on.
Example: Lets suppose that cell A2 shows 1234, then cell c2 will show 1234, once cell A2 goes back to 0, cell C2 remains 1234. Then when cell A2 shows a new number 5678, then cell D2 will display the new number 5678 and if A2 goes back to 0 cell D2 will retain the number 5678 and again, once cell A2 displays a new number 1589, then E2 will display 1589, etc, etc. This could happen as many as 20 times (up to column V) before erasing all columns and beginning all over again.
I have a row of data. The first few columns are given data, and then the next few columns are equations that use the first few columns of data.
The next row down adds the result of a few of the equations in the row above it to the given data, and the equations are calculated again.
It looks a bit like this:
1231437-111213-9
in the first row, 1 and 2 are just given. 3 is just 1+2 (a1+b1), and in the last column, 1 is just 2-1 (b1-a1). In the second row, A2 is A1+C1, and B2 is just B1+D1, C2 and D2 are the same calcs as C1 and D2.
This row is then filled down.
What I would like to do, is just calculate what the first two columns of data are by just entering the number of cycles id like to make, instead of filling down the row.
For example, I would like to just enter N=3 in a cell, and it returns 11 and 2. Or N = 1000 and it would give me whatever the first two values are if i had filled the row down 1000 rows.
my macro filling down the data properly. I have a table wit headers set up. My macro selects two cells in the first row, and tries to copy it down into the other rows of the table. Instead what happens, the macro copies down the table headers into the two cells that are selected. Here is my code.
Range("I3").Select
ActiveCell.FormulaR1C1 = "Order Filled"
Range("J3").Select
ActiveCell.FormulaR1C1 = "Order FIlled"
Range("I3:J3").Select
Selection.FillDown
I am looking for a Macro to fill in a formula in each row where there is a value. So if there is a value in row 1 Column A then place this formula into Column B and continue down the sheet untill there is not a value in Column A.
View 9 Replies View Relatedmy macro simply activates a cell and all i want it to do is to auto fill downwards!
its intended to autofill down for about 100 rows but just cant figure it out!
but keep in mind the cell is always going to change so it cant be fixed
i.e this wont work:
Selection.AutoFill Destination:=Range("C95:C659")
Range("C95:C659").Select
ActiveWindow.SmallScroll Down:=513
because i need it to be autofilled from the CURRENT active cell only!
I've recorded a macro where I have selected two adjoining cells in Row-9. I double-clicked at the cells to fill-down the formulas to the end of the range. However, the macro recorded: Selection.AutoFill Destination:=Range("H9:I152")
Of course, I will be adding and deleting rows from this worksheet. The next time I run the macro my range may only be to row 80 or it may be up to 200. How can I make the macro dynamic, so the AutoFill goes from H9 to "the end of the range"?
I'm using 3 sheets within one Excel file. 1st sheet (target) is called Offer, the 2nd one (source) is called Stock and there's a 3rd one that only contains a button to which i'll assign the final macro. Now, back to it.
I need to copy from Stock to Offer contents of the entire column (basically there are a few more in Offer, so i need to copy each one and place it in a different part). I need to copy from ROW 2 and paste in ROW 6. The length of the document varies, as it's connected to the database (now i can have 3800 rows, in the next hour 3765). Previously i just added an X to row 4500 ( i don't expect to EVER have more than 4000 lines) and just copied from 2 to 4499
Second issue is, on the Offer sheet i have to fill a column with a certain value. Again, it needs to start from Row 6, and needs to be as long as the adjacent column. To get a better idea, i have for example 3800 price lines, so i need the column next to it to be filled with 3800 rows saying GBP (this will be a fixed value).
Also, none of the codes above should exclude blank cells in the middle of the string. Last thing, seems some of the barcodes i have only have 12 digits, so i'll need to add a 0 in front of all shorter numbers to go up to 13 digits.
[Code] ......
I should be able to figure the rest by recording bits and pieces. The Save part is done already, i'm using
[Code] ....
I needed it in XLSX format, not XLSM so that suits just fine. I might need to add hour and minute as well but i can sort it out (as i said, i can do some stuff on my own but this one got me to the bottom).
I need a macro that will insert this formula: =Trim(IF(B3="","",MID(B3&", "&B3,FIND(" ",B3)+1,LEN(B3)+1))) into column C starting on row three through the end of the spreadsheet information.
I typed this incorrectly when I first posted. I need it to fill down into only column C not the end of the spreadsheet.
I am having some issues with my macro. I keep getting a syntax error? I am trying to combine these coding combinations together. Code G0398 with 95800, code G0398 with 95801 so on so fourth..
G0398
95800
G0399
95801
G0400
95805
[Code] ...........
Col D has list of order #'s, starting in row 9. Col M is for COMMENTS about each order. Order #'s can appear in Col D more than once.
What I am looking for is a macro that will automatically detect if I have entered a new COMMENT in Col M, recognise the order # in adjacent Col D, and put my new comment in other cells in Col M if the SAME ORDER # is referenced in adjacent Col D.
Example:
worksheet starts with:
Col D Col M
1234 x
123 xyz
1234 zyx
4321 zyx
321 y
1234 yz
If I type the letter "Q" into Col M in a row adjacent to order # 1234, the result should be:
Col D Col M
1234 Q
123 xyz
1234 Q
4321 zyx
321 y
1234 Q
I think I would need to put this macro into a Worksheet Change event but beyond that I do not know what I need. UDF? Macro?
I have been helping a friend keep track of his clients, by making a form for them to fill out when they become a client of his (he owns a care rental) and I made a spread sheet for him to keep track of which cars are out when...
With that said, I would really like to have a Macro that i could run, when the form with all the personal information about hte client had been filled out - take that information and pull it over into another spead sheet that keeps track of all clients.
Meaning that workbook 1 is set up as a booking form and workbook two is just a normal list. I can make a macro that pulls over the infomation - but the problem is that it will always pull the information into row 1. Meaning that it overwrites itself each time I run it. I would like the Macro to know that it has to fill the information into the next empty row.
i have a userform named: usf_History.
i would like to refresh all the text boxes (they either refer to cells or are calculations)...?
I wonder if soeone could change the following macro so that the bottomcell
is set to be as far down as there is content in Column "A". As it stands if I fill in blank cells in Column "C" and the last cell with data is say C10 it does just this. But if the actual last row with data in column "A" is A14 then cells C11, C12, C13, and C14 are ignored. C11, C12, C13, and C14 should be the same as C10 above them.
Sub FillBlankCells()
Dim topcell As Range, bottomcell As Range
Set topcell = Cells(1, ActiveCell.Column)
Set bottomcell = Cells(16384, ActiveCell.Column)
If IsEmpty(topcell) Then Set topcell = topcell.End(xlDown)
If IsEmpty(bottomcell) Then Set bottomcell = bottomcell.End(xlUp).Offset
Range(topcell, bottomcell).Select
Selection.SpecialCells(xlBlanks).Select
Selection.FormulaR1C1 = "=R[-1]C"
End Sub
Other macros recognize the actual last row.... but have issues with columns formatted as Text. The macro above doesn't create problems with columns formatted as "Text".
I have written a macro that creates a new spreadsheet and copies text into it. The number of rows varies depending on the input.
Yet, running the macro results in a sheet with the max rows (65k+). This is unmangeable, as it makes it a huge file and size and harder to print.
I only want there to be the number of rows that have text in them.
The larger problem is how these were even created in the first place. Currently:
' Formula for Job Name
Range("A2").Select
ActiveCell.FormulaR1C1 = "=LEFT(RC[12],8)"
' Fill Job Name
Range("A2").Select
Selection.AutoFill Destination:=Range("A2", Cells(Rows.Count, "A")), Type:=xlFillDefault
I have a database (spreadsheet) which has 3 to 4 dozen columns of data. This data is in Sheet 2. On sheet one I would like to have a form which organizes the data on one sheet from sheet 2. I would like to have a drop down box to select the country. Once country is selected all data to the right of country would then be automatically filled on Sheet 1. see attached example.
View 2 Replies View RelatedI am trying to create a macro that will automatically fill in the days for a user if they fix the date. That is my end-goal, but obviously I have to take it step by step.
My first complication is how can I fill in all of the day rectangle boxes automatically? I was trying to create a macro for it, but it would only change the very first box. (You can see from my sheet, the days go 3 then 2)
After that I want to try and have constant-macro where if they change the month and the year it will automatically update the calendar for the user.
I have a startdate F1 and an end date G1. Is there a macro that can list all dates by day within that range into column I7:down.
View 9 Replies View Relatedhow to auto fill of same value in different cells in a row?
For Example:
A1 D1 E1 G1 K1
10 10 10 10 10
like that when i hit a macro button the values in the A1 D1 E1 G1 K1 must fill with A2 D2 E2 G2 K2
I have some information in a column where I have different types of references in each cell with some blank cells in between. I am trying to write a macro that will go down the column until it gets to a cell containing the reference "THIS PAYMENTS" and then copy that cell reference down until it reaches a cell containing "Y-T-D AMOUNTS".But I want the loop to carry on until it reaches another cell containing THIS PAYMENTS.I want this to repeat for about 3000 rows See here before and after result.
Before
After
PERIOD
PERIOD
[Code]....