I'm creating a report at work that I want to be able to print out a PDF copy of a worksheet (QPRForm_V6). I have Excel 2007, and have using the code below that works for me, but when people using Excel 2000 try to run this macro, it gives them a 400 error. Everyone has this program called PDFCreator (that is set up in the printer folder).
View 2 Replies
I would like to know if it is possible to run a macro from excel for another program and then have results imported into excel.
Currently I have a program called Reflection WRQ that I run a macro in and the results are captured in a text file. Then I run a macro in Excel that imports that text file. If possible I would like to have my macro in Excel run the command in Reflection and then import the results in Excel.
I've only used VBA to expedite Excel processes, so this is my first exploit into using it for something else. So there's a radio program I enjoy listening to. It's not local, so I have to stream it online. I got a job recently, and I can no longer listen to the program during the day (my job doesn't allow streaming audio). So basically to hear the program, I have an internet explorer add-on called freecorder that records streaming audio. Basically what I've done till now is start recording the streaming radio before work and then stop recording when I get home. That creates quite a large file, so I'd like to set up a macro that does the following:
1) Open internet explorer at noon
2) Go the website from which the radio station streams
3) Click the button that starts freecorder recording
4) At 3 o'clock click the button that stops recording
I need to write one Macro program for below logic.
A
B
C
123
123
‘TRUE’
123
234
‘TRUE’
[code]......
Is It Possible To Auto Save To A File Via A Macro?
What I Want To Do Is To Auto Save Directly To A Folder On Our System Via A Macro.
The Problem Is That Firstly It Will Need To Look Up A Cell ( D8 ) To Find Out The Job Number
Then It Will Have To Find The Folder On Our System ( Its On Desktop Under Job File Folder ) Then Comes The Hard Bit It Will Need To Locate That Job Number ( Cell D8 ) To Look Up The Relevant Folder To Put It In. All The Job Files Are Labelled Up Eg.( J2663 - Parry ) Then In That Folder Is A Sub Folder Called Docs Which It Needs To Be Saved In
Writing a macro to run SOLVER on a linear program. I have twenty tabs, each with a linear program and a solver already set up (constraints, cells to change, and cell to maximize). I would like to run a sub that will solve each tab's LP by running the tab's SOLVER...
If it makes it easier, my cell to maximize is I17, by changing B16:H16, subject to I20:I40 SolverAdd -> SolverOk -> SolverSolve
I was wondering if there is a way to open up a given program (notepad in my example) ..paste data from cells copied in excel and save the notepad file to a specific location and close it out??
The file path will be given from a data cell in excel as well as the file name.
From searching the forums i've come up with the way to open notepad
using the lines
Dim RetVal As Variant
RetVal = Shell("C:WINDOWSSYSTEM32
otepad.exe")
Is their a way to convert a PDF file into an Excel spreadsheet?
View 5 Replies View RelatedI have tried many different ways to convert pdf to excel the best seems to be to highlight the data in adobe acrobat using the table/fomatted text tool >> right click >> save as ANSI.txt >> open with Excel. However, will only let me highlight a singel page in the document at a time My current document is 200 pages. Does anyone know how to beat this limitation or create a batch process?
btw, I have tried these utilities
Ghostscript
Able2Extract
pdf2txt
They all failed at negative numbers formatted as such (200,000) The right parend is output to Col A The remainder is output to col B In addition, labels such as TJE 098789 Roth are output to three columns instead of 1.
I open a program using code
Code:
Call Shell("C:Program Files...
After this is open i have to type my password, how can i create a macro to open the program as above then type my password then hit enter.
to sum it up
i can open the program
i need code to type in the open program and hit enter.
I have some VBA code which opens a pdf file in Adobe reader based on a cells Hyperlink reference. I want to add some code to close all instances of adobe reader before I call the function to open the correct pdf.
View 3 Replies View RelatedI have a workbook that consists of a number of worksheets, and a selection of these are updated regularly. Once updated the sheets are PDF'd using Acrobat 8 Standard to create a report, ready for mailing. To speed things I want to do this via a button click rather than going through the Acrobat interface and selecting the sheets to generate the document.
I have, as suggested here, recorded the action to create the report via Acrobat Distiller, including selecting the appropriate sheets. When I run the code, distiller treats the selected worksheets as separate files and subsequently tries to save them separately, ie 4 selected files - save prompt comes up 4 times.
a way to allow me to treat the selected sheets as one and therefore create one pdf consisting of all of the selected sheets.
my use of macros is usually limited to what I record.
Sub Print_PDF()
'
' Print_PDF Macro
' Macro recorded 06/06/2009 by MJ Cosker
''
Sheets( Array("Sheet1", "Sheet2")).Select
Sheets("Sheet1").Activate
ActiveWindow.SelectedSheets.PrintOut Copies:=1, ActivePrinter:= _
"Adobe PDF on Ne05:", Collate:=True
Sheets("Sheet1").Select
End Sub
I'm looking for a way to take information that is in a table in an Adobe file and importing it into a table format in Excel 07. I'm able to copy the table from Adobe and paste it into Excel as a picture, as I need the data to come into Excel in columns and rows. I have Adobe Acrobat 9 Pro version that I use to open the PDF file.
View 1 Replies View RelatedI get pdf files from my UPS carrier and need only a certain part from the text to import into my administration. Sure I can convert the pdf into text and import it into exel that way, save it into xls or csv and you are in but... is there a short cut? Since you can select and copy a part of a pdf file I wonder if it is may be possible to do so within a macro as well no? Is this a crazy question? because I could not find a similar question by searching the forums. May be I was searching for the wrong subject.
View 2 Replies View RelatedI need to create a macro that can create a dynamic copy/paste loop. So far what I have is horribly inefficient. Each row in colmn A(minus the header) has a unique number in it. For each unique number, I need to paste it based on the number of column headers in row 1(minus column A). So, if there are 20 column headers, I need to copy cell A2 and paste it 19 times in another sheet. Then, I need to move to the next number in column A and do the same thing. Here's what I have:
[Code] .........
You can see that this is not dynamic. If I add another row to my table and rerun the macro, it will not catch it. I've attached a sample file to show you the big picture of what I'm trying to do. The data that I have is in Sheet1, and I'm trying to get it into the format in Sheet3. Rows/columns will be periodically added to the table in Sheet1, so the macro needs to be dynamic to catch that. The data in Sheet3 will always remain, and the macro will add the updated data below the old data in Sheet3.
FC_Macro_Sample.xlsm
I want to highlight the unprotected cells as seen in the attached PDF document in excel 2007.
View 14 Replies View RelatedRefer to attached file.
I have below code which successfully create a macro button and assign the macro correctly.
This is only doing for one sheet and i need to modify the code so that it does for all sheets of the workbook.
[Code] ....
Test Macro_Botton.xlsm‎
Writing a Marco. I would like to place a macro on the opening page of a workbook and like to a button that executes three functions.
1) I need to hide selected tabs in a workbook
2) I need to copy paste values of a couple select cells in a workbook
3) Lastly, I would like to set up the workbook so that the use can not move beyond the opening tab with out clicking the macro to preform the steps above.
Is this possible? I know 1 and 2 are for sure, what about 3?
There is a machine in our office that is running the same software as my machine. (XP SP3, Office 2k7, All MS Updates)
On my machine, as well as most others in the office, all the code works fine. On another machine, strange issues arise.
As I am running the Sun Dreamteam at work and have 25 different teams, is there a program that will work out how many points each team have once the points have been entered.
I have looked but cannot find anything, just wondering if someone out there has set one up that I can use.
When an .xls file is double clicked, Excel opens with the following error message:
'F:Program.xls’ could not be found. Check the spelling of the file name, and verify that the file location is correct.
If you are trying to open the file from your list of most recently used files on the File menu, make sure that the file has not been renamed, moved, or deleted.
When the dialog box is clicked, another error message is displayed with the same words, but with the file name 'microsoft.xls'.
I have tried un-registering and re-registering Excel, and uninstalling and re-installing all of Office 2003.
KB 177248 refers to this problem and suggests: ....
How to call another program from excel using VBA, then excetue commands within it.
All the commands are text based, and the program will respond to it, but i am not sure how to automate this.
I have data in an Excel worksheet that needs to be entered into a proprietary programme. I believe this is possible using SendKeys but as I need to keep switching back to Excel to get the next bit of data I am unsure as to how to go about this. The program would already be open as it is a dial up situation and I would have to dial into the relevant site first.
View 4 Replies View RelatedI am making a Program search tool for my company. I would like the operator to type a part number into a cell. If the part number is valid (from a master list on a different sheet), then I would like to pull the information from the master list and populate a few cells on the search worksheet.
Example:
An operator types: "W3303-01" in a cell and clicks a button. The macro would populate cells on that worksheet with information from another worksheet that pertains to "W3303-01"
i m trying to use Excel program to keep track of the hours he is working. I know there is a way to do it but it has been many years since I used Excel and can not remember how to do it. He would like to insert the time (hours & minutes) he works in column A and have a sum in the next column.
View 7 Replies View Relatedif it is possible for vba to recognize the name of the file is into.
example:
You file's name is : Track
you change for : Music
Your code automatically recognizes that and change the code.
I've just begun a C&G in VB for work even though at work we use Excel, I'm trying to convert the program we did this week so that it works in Excel. Basically I want to click on the Font button and have the font dialogue box come up and let me change the font in the label (if the checkbox is ticked), hope it makes sense, this is what I have but it doesn't work and I cannot work out why.
View 11 Replies View RelatedI start my excel program from a "Shortcut" in "Folder 1".
That shortcut points an Excel program in "Folder 2".
When Excel is started,
Parent.Path returns "Folder 2",
but I really need to know what "Folder 1" was.
It seems that should be available as
when I do "Save File As"
it is pointing to "Folder 1".
Is there a way to find what "Folder 1" really was from the VBA enviornment.
Now the list is, if the quantity column for the "Productx" is >=1 than whole row will add to the "Order", if not skip it, i have the formula in the "Order" block A2.
i will have about 6-7 list for "product", now in my file is only 2 Product list (Product1, Product2) and now i want to add more for this, like Product3, Product4....... so i think i need to add program for this and also some expert user also tell me need to add VBA for this.
Can I program column B to show a certain value depending on the presence of a string of text in column A? For example, if A1 contains the word "Barbie", then cell B1 shows the value: "Ken"
View 5 Replies View Related
