i m trying to use Excel program to keep track of the hours he is working. I know there is a way to do it but it has been many years since I used Excel and can not remember how to do it. He would like to insert the time (hours & minutes) he works in column A and have a sum in the next column.
View 7 RepliesI am creating a spreadsheet that will track hours of overtime worked and within the spreadsheet there are several separate departments listed.
I have made it dynamic so that the summary spreadsheet will update as employees are added. I’m using a macro and some complicated helper cells to be able to sort the employees based on their total OT hours worked.
I can't figure out how to do a proper formula for calculating time. For instance I have one column that says "Time In", the next is "Time Out" and the other is "Lunch Time". My calculation needs to be this:
Find the total hours between the Time In and Time Out and then Minus the lunch time to get total hours worked for the day. The only way I can get this to work is using 24 Hour time format. Is there another way?
I'm creating an log to track the total number of hours an employee works in one day and calculate regular and overtime hours worked based on the following criteria: overtime will be >8 hours in one day and >40 hours in one week.
Right now I have it 'mostly' figured out, but under certain conditions, it calculates more than 8 hours in one day for straight time. Is there a way to set a maximum value for the straight time cell and have the difference be added to the overtime cell?
I have been working on the attached spreadsheet, we have projects that our employees work on. I need to keep track of the hours spent on each. Then I need to combine this information so I can do some calculations, for example based on the total hours spent I can then work out the actual cost spend on the project versus what we have invoiced for this project, like a mini Profit and Loss on the labor only.
I created a different worksheet per employee, I would like each employee to only be able to access there own worksheet, based on some protect or share worksheet rules. I created lists of Projects and Users, so this data is the same in each worksheet. Then I would like the data from each employee (only have 3 at this stage) to collate onto another worksheet, which only I can see, so I can do my total calculations etc. Along with hours, sometimes each project might have extras, this is charged at a certain rate per employee, so on the totals page I will also use this information.
Here is what I have so far. Workings 150514 - sample for expert.xlsx
As you can see on the example i have TEST hours.xlsx, I have a file that calculate the money every doctor should take based on the working hours.
Nights, holidays and holiday night have different price/hour.
The excel is working fine…but now I have to make a formula that separates automatically based on the beginning time and the end time of the doctor’s shift the day hours tha night hours, the holiday hours and the holiday nights hours.
In the excel I have fill the hours Manuscript, I need a formula to do that for me…
On the yellow cell I have try to find out the formula for the holiday hours but because the day is calculated due to a formula it is not working!!!
Simple Example: A doctor Is working from 21:00- 8:00 (next morning Sunday) he should have 1 simple hour (21:00-22:00) 9 night hours (22:00-6:00) and 2 holiday hours (6:00-8:00,)
In column A I have a date AND time entered. By the way, this is not via cell format, I have manually entered, say today's date and the current time. In column B I have a future date and time.
Basically, column A is the date and time a problem was given to me. Column B would be the date and time I resolved the problem. Now for the formula....Column C needs to spit out whether the problem was solved between 24 and 48 hours OR less than 24 hours OR greater than 48 hours.
Lunch is not paid. Holiday and vacation hours get calculated at the regular pay rate. Overtime is anything in excess of 8 hours per day and/or in excess of 40 hours per week and/or over 5 working days per week. Saturdays for most the employees will be overtime because it will be their 6th workday of the week; but it will be regular time for one employee as it will only be his 5th workday of the week.
For accounting and payroll purposes, we need the totals to display in both hour and decimal format.
So far, I have Lunch, Regular and Overtime hours figured out, but I still need to work with Saturday, Vacation and Holiday hours. Also, currently, the time in and out has to be typed in with the colon and AM or PM. Is there another way to input the info without having to type in those items? I'm trying to make it as user friendly as possible.
The below formulae allows me to see the difference between two dates and only returns the difference in working hours ie :
Difference between
02/02/2010 08:00 & 03/02/2010 08:00 is 16 Hours 0 Minutes
=(INT(A3)-INT(C6))+MAX(MOD(A3,1)-MAX(MOD(C6,1)))
The following displays it in the Hrs and Mins format
=TEXT(B15,"[h]")&" Hour"&IF(OR(TEXT(B15,"[h]")+0=0,TEXT(B15,"[h]")+0>1),"s "," ")&MINUTE(B15)&" Minute"&IF(MINUTE(B15)1,"s ",""))
I'm attempting to make a simple time sheet for a handful of employees. I'd like to enter the clock in time and clock out time for each day. The end cell should be the running total for the week. The tricky part for me is having the formula subtract an hour for each day that is over 5 hours.
View 3 Replies View RelatedFormat Time Cell For Greater Than 24 Hours: Hours & Minutes Only .....
View 9 Replies View RelatedI'm having difficulty to calculate hours between 2 or 3 days exclude non working hours.
Attached is the example of start date with time & end date with time.
The situation is like "when the case log in till the case assist in working hours." so i will get the hours from case log to case assist.
Testing.xlsx‎
I have been working on a timesheet but the problem I have come across is calculating actual hours worked only in the core hours and any work outside the core hours is calculated in the outside hours column. A standard work day is 7.6 hours working between 8.30am and 5.00pm. However if someone was to commence work either before 6am or after 8pm this is outside of core hours. I have attached an example of my timesheet for you to see what I am talking about.
View 3 Replies View Relatedfind a formula that will calculate the hours between the two below values but only take in to consideration the business hours (from 9 to 17) and exclude any weekends?
08/03/2013 13:32:00
02/04/2013 09:32:50
I have got a formula that can separate day shift hours from night hours, in this case night begins at 7pm to 7am, however the problem is after 12am we get into negative numbers, what formula would fix this and can be combined with the formulas below?
E10 = 19:00 or start of night time hours
B3 = start time
C3 = end time
D3 = day hours workeds =24*IF(E10
A1 is 10 (10 hrs worked) , A2 is 10:30am (in time), A3 is 9:00pm (out time), A4 needs to be the total hours and minutes between A2 and A3 based on the hours listed in A-1. What i need is a formula that will calculate the hours and minutes between the 2 times based on hours entered in A1 but that will also compensate for a manadatory 30 minute lunch that needs to be deducted from the total hours if hrs listed in A1 are more than 6.
example: worked 10HRS, 10:30am to 9:00pm, Total hrs is 10hrs 30min, which should be just 10 since the lunch is a none work time and must be subtracted.
If a person worked more than 6hrs, they must take a lunch. if they worked less, than 6 then they don't have to. I need a calcuation to recognize the greater than, less than factor into the equasion also.
I am making a schedule and I would like it to take out a 30 min break if the hours worked is over 6 hours.
I have so far
A B
1 11:00 7:30
=24*(B1-A1)
Gives me 8 hours, I would like it to subtract the 30 minutes only ifthe sum is over 6 and not alter the sum if it is under 6.
1) The output of an excel duration is : 22.00:8.00:25.00 ( day:hour:minutes ) - excel cannot average and work with this number format
2) resolution - =(LEFT(L2,4))+MID(L2, FIND(":",L2)+1,4)/24+MID(L2, FIND(":",L2,7)+1,4)/1440 as an array and Custom Format the cell as [h]:mm - works perfectly.
Q: to be conistent, the initial reporting is dd:hh:mm and then I convert to hh:mm so that excel can process the data. How can I convert from hh:mm to dd:hh:mm so that the excel report can be consistent in presenting the data to senior management?
example attached.
I am attempting to convert a spreadsheet of times (listed in the format 06:15:39.62, where 06 is the hour, 15 is the minutes, 39 is the seconds, and .62 is in truncated miliseconds) into fractions of hours (so, 6.25 [NOT 6:25!]). I've so far been doing it manually for each value, which is quite tedious (doing basic division of seconds and minutes into hours, to find the fraction) but I'd like a single formula which I can then apply to the whole spreadsheet.
View 2 Replies View RelatedI am trying to compute a running total of hours (from row 1) in row 2 Example................
As you can see, when the sum exceeds 24 (moving to the right across row 2) the answer resets, so to speak. Cells are formatted as time. This format *seems* incapable of recognizing quantities of hours over 24 except as days, as it were. This is obviously useful in most sorts of cases but not in this sort of case.
If I simply want the aggregate number of hours expressed as such am I doomed to failure whenever the total exceeds 24? In reply to a somewhat similar enquiry elsewhere in this forum, advice was given to format a cell as Elapsed Time. I dont see such a choice in my dropdown menu.
i need to convert second to Hours and mins and can do so using:
View 3 Replies View RelatedWhen I am converting a time from Hours/Minutes to Hours/Tenths, Excel is not converting it consitantely. EXAMPLE: 1:15 = 1.25. When I format the cell to present only one place past the decimal point, sometimes the cell will round up to 1.3, and other times it will round down to 1.2. What am I missing?
View 3 Replies View RelatedIs there a way to conver a persons time spent (given in weeks) to adjust/convert to show per month. Attached is the sheet. Do note that week 2/25 - 3/1 is a combination of Jan and Feb so hours should be logically divided into jan and feb...
Name 2/18 - 2/22 2/25 - 3/1 3/4 - 3/8 3/11 - 3/15 Feb mar
Tom 40 10 0 20 ?? ??
name
2/18-2/22
2/25 - 3/1
3/4 - 3/8
3/11-3/15
Feb
Mar
tom
40
10
0
20
??
??
There is a machine in our office that is running the same software as my machine. (XP SP3, Office 2k7, All MS Updates)
On my machine, as well as most others in the office, all the code works fine. On another machine, strange issues arise.
As I am running the Sun Dreamteam at work and have 25 different teams, is there a program that will work out how many points each team have once the points have been entered.
I have looked but cannot find anything, just wondering if someone out there has set one up that I can use.
When an .xls file is double clicked, Excel opens with the following error message:
'F:Program.xls’ could not be found. Check the spelling of the file name, and verify that the file location is correct.
If you are trying to open the file from your list of most recently used files on the File menu, make sure that the file has not been renamed, moved, or deleted.
When the dialog box is clicked, another error message is displayed with the same words, but with the file name 'microsoft.xls'.
I have tried un-registering and re-registering Excel, and uninstalling and re-installing all of Office 2003.
KB 177248 refers to this problem and suggests: ....
How to call another program from excel using VBA, then excetue commands within it.
All the commands are text based, and the program will respond to it, but i am not sure how to automate this.
I would like to know if it is possible to run a macro from excel for another program and then have results imported into excel.
Currently I have a program called Reflection WRQ that I run a macro in and the results are captured in a text file. Then I run a macro in Excel that imports that text file. If possible I would like to have my macro in Excel run the command in Reflection and then import the results in Excel.
I have data in an Excel worksheet that needs to be entered into a proprietary programme. I believe this is possible using SendKeys but as I need to keep switching back to Excel to get the next bit of data I am unsure as to how to go about this. The program would already be open as it is a dial up situation and I would have to dial into the relevant site first.
View 4 Replies View RelatedSo I got this code from http://www.ozgrid.com/VBA/track-changes.htm i followed the directions and pasted it in the workbook module but does not seem to be working. I am thinkning the copy and paste feature is messing something up anyone know what?
I have added a worksheet named Log