Macro To Create Sheets In New Workbook Based On Template And Evaluator?
Feb 10, 2013
I had created a base data with evaluator and performance appraisals templates which should be sent to each evaluator for filling up the forms based on templates
Next,
Macro that would i require will be
Where in my base data if i select filter of "Arun", i will performance appraisal templates in column I. Next, i have sheets individually created templates which refer column I
So, based on arun filter if i select, it should create a new workbook for arun and six individual sheets of employees reporting to him with a base data and appraisal templates similarly if i select anita in filter , it should create a new workbook for anita and six individual sheets of employees reporting to her with a base data and appraisal templates
I'm trying to create a workbook with multiple worksheets. My first sheet to be named "Main" and each additional sheet to be named in sequence after the values in the cells between B5:B98 on !Main.
I'd like to have a macro that would take a worksheet in this workbook named "Template" and make a copy for each cell between B5:B98 and name that new worksheet "c" and then the value in each of those (B5:B98) cells.
Example: First worksheet named "Main" Second worksheet named "c01" Third worksheet named "c01.1" and so on.....
I need new workbooks based on category name in the below list. Respective sheets should be copied from the existing workbook with items as sheet names. List can be updatable.
I am new to the VBA editing and I am missing some steps to get my files correctly generated and then ideally saved in PDF format in the same folder.
I have two files; one is an invoice template with the following fields:
Invoice Reference: Line 8 column D Issue date: Line 9 column D Client name: Line 11 column E&F Client address: Line 12 column E&F Product name: Line 16 column E&F Product details: Line 18 column E&F Production date: Line 20 column E&F Delivery date: Line 22 column E&F Units: Line 24 column E&F Total Units: Line 26 column E&F Total Invoiced: Line 30 column F
Each sheet in the "template" workbook should be named after the Invoice Reference.
Secondly I have the source file in which the data is organized as follows: (Both are in the same folder)
Invoice Reference: column A Issue date: column B Client name: column C Client address: column D Product name: F Product details: column G Production date: column H Delivery date: column I Units: column J Total Units: column J Total Invoiced: column E
One invoice needs to be created per line in the source workbook. I tried many times the macro recording without getting the correct outputs.
I have a spreadsheet which has all the names of trips from a warehouse, the day that they operate (1,2,3 etc) and the job line allocated to each trip. It looks something like that:
A B C DAYTRIPCUST
I would like to create a macro that will be creating 7 new workbooks and then in those workbooks as many sheets as the trips. In these sheets, the customers should be displayed.
How do I write it? I could not find how to have a "dynamic choice" in the macro. I.e. not to have the criteria as "1", "trips1" but to choose from the range of inputs that are available.
I have a master template with columns running from A to Q. Most of what she wanted is fairly simple 'if' statements, however she also wants to move the contents of one cell to an adjacent sell based on the number exceeding a certain value,
[Code].....
My problems start when I want to create a new sheet/tab and let her name it. I would have simply created 12 months for her, unfortunately there is a sheet for a number of people and the start of the year can vary. My simple solution was to create a macro that copies the original Template (effectively sheet 1) and puts it into the newly created tab. However this does not copy the above VBA code across
I have what is probably a simple request to all the VBA experts out there, and simply want to take a template sheet in a workbook and copy it across to 100 sheets numbered/named 101 -200, and add the name of each sheet as a text reference, e.g. sheet name 101 will have a cell within the worksheet that refers to sheet 101.
I have attached a simplified spreadsheet which indicates what i'm trying to achieve.
Typical user OS will be Windows XP Pro / Win 2K Excel version : 97 / 2002 / 2003
1. Corporate network security settings will only allow directory/subdirectory creation in the “My Documents” section of customers individual computers.
2. Per customer request, VBA application needs to save extracted files for future use.
3. I can specify an initial “My Documents” subdirectory be made and the VBA application file be loaded/copied into that location – i.e. – “My DocumentsCat”.
4. When VBA application is opened from that specified directory, (first time), the application needs to make an additional subdirectory tree to save future files. I can read the opened from location via VBA with the following:
Dim filepath As String filepath = ThisWorkbook.Path As an example – this code would produce a string definition of “filepath” – such as the following:............................
Step 1: I have data coming from a data dump which is placed on the "Summary" sheet of my excel workbook. I need to take column A (beginning at A8) and create a new sheet (based on "Template" located in the same workbook) for each name in column A.
Step 2: I need to place the name of the new sheets in cell C4 of each sheet so I can do a lookup using C4 as my lookup_value, so this can't be a formula like "=MID(CELL("filename",A1),FIND("]",CELL("filename",A1))+1,256)" because lookup doesn't function properly.
Step 3: Delete "Template", so that the only things left are the "Summary" sheet and the new sheets.
Each department will have their own workbook with a "summary" sheet and different sheet names although they will all start off with the same data dump and will all be in the same format. Each department could also have a different number of new sheets added depending on information from the data dump.
I found a utility (ASAP Utilities) which will do the steps I need done, but it won't record in the macro.
Budget time is fast approaching and each department needs their worksheets.
If you have a workbook or a template open you can find out the full path of the file from the .FullPath property. My problem is that when a user double-clicks my .xlt file (to create a new workbook based on it), I want the code in the Workbook_Open event to be able to tell the full path of the template it was created from (because the code will later go on to save the new workbook under a date related filename in the same directory that the template was located in). I haven't been able to find a property that gives me any clue as to the location of the template this new workbook is based on.
I am currently doing an excel database of students application. I want a macro that creates a duplicate of a template sheet and renaming it based on the name of the student. Meaning once a name appears in the name cell, a sheet of that particular name is automatically created. At the same time, i want all the data regarding the applying student to appear the newly created sheet as shown in the attached file.
I have been tasked with creating a macro which creates a new workbook wherein each sheet contains the information for one site from the active sheet. The active sheet already has the values sorted by the site such that all information needing to be copied from the active sheet into the new workbook is together.
I.E.
ATL ATL ATL ATL CEN CEN JCK JCK etc.
There are 8 different sites on the active sheet: ATL, CEN, DAL, HAR, JAS, JCK, VIS, NOV
The macro needs to find the range for all of the data of each site and copy/paste that data into a new workbook such that ATL would have its own sheet, CEN would have its own sheet, and so on. The data ranges from A:R.
So, for example, the macro would find that the last row with ATL in the "B" column is 6095 and would then copy A2:R6095 and insert that data into the new workbook under Sheet 1.
I had some code that I had adapted to select the range for each of them, but the code loops through the entire sheet (which is 44,307 rows long) for each site making it a quite clunky and very slow step in an even longer macro. Since the data is already sorted, I know there must be a way to have the macro stop searching when it reaches data not equal to the data the row before, however, my experience with VBA is limited, and I have been unable to find a solution. Also, the data does not have to be conserved after being sent to the new workbook, if that would speed up the macro.
I have a workbook that has a sheet called CustInvData, this sheet contains 4,421 rows of invoice transaction data for 178 customers starting on row 2 (headers on row 1). I need to split the transaction data for each customer out into a workbook template based on the customer name in column A. I need each workbook named by the customer name along with a month and year (example: Bellsouth-0911.xls), this should create 178 unique workbooks. And since we sometimes have to go back and rerun invoices for previous months, I'll need to control the month and year manually in the code.
The parsed data needs to be copied to a pre-formatted invoice template. This template has 2 sheets, Sheet1 is called 'Product Summary', this is a table that uses VLOOKUP functions to read the data in Sheet2 called 'Product Details', this is the sheet the parsed data needs to be copied to for each customer invoice. The 'Product Details' sheet has formatted rows 1 thru 11, row 11 being the header row for the data from CustInvData to be copied. So the parsed data needs to start at row 12.
Last, once the data has been copied into the 'Product Details' sheet, I need the data to be SubTotaled at each change in column J (Product) and use the 'Sum' function to add a Subtotal in column L (Retail Price) for each unique product category.
Example data below, I've simplified it (the actual data array spans from columns A to Y)
Sub Macro2() Dim stgSheets As String, Cnt As Long Dim arrSheets() Cnt = Sheets.Count ReDim arrSheets(Cnt - 1) For i = 1 To Cnt stgSheets = stgSheets & Sheets(i).Name arrSheets(i - 1) = stgSheets 'sSheets = sSheets & "", "" Next i
I have a workbook with roughly 28 tabs(sheets) and i need to be able to run a macro that will create a new sheet for each tab and name it based on the tab name.
New to using Excel formula's and am trying to create an IF/LOOKUP formula to look at multiple sheets within a workbook and display the information within the 'compare' sheet.The yellow cells are where data will be entered.
What I am trying to achieve:
Type the store numbers on the compare sheet (B2 and D2). For the sheet attached I have put 190 (in B2) and 2012 (in D2)
B2 store shows the predicted and actual values of 190 in columns B & C
D2 store shows the predicted and actual values of 2012 in columns E & F (No need to worry about variance and difference columns)
So, if I change the store numbers in B2 and D2 to any of the sheet numbers, I want it to display the correct info for that particular store within the compare sheet.
I have attempted a formula, which you can see... I have basically looked at some previous sheets that had IF and LOOKUP on it and tried to replicate that for my sheet, but with no luck.
Now I'm looking is when opened in Excel, it should create a two sheets excel file 1) with the First Section and the 2nd with second section . based on headers included in file.which then will be used for PivotCharts..in 2nd stage of automating..
I have a workbook with many, many worksheets. On each worksheet there is a column called "Cost Code". I need a Macro to locate all like "Cost Code" values and extract data from several cells along that row. Macro would then tally the values from all those like cells on numerous worksheets and place sum on a seperate worksheet in the same workbook, on a "Totals" worksheet page.
For instance -The "Cost Code" value Macro to look for is 1000. This value is located on several worksheets. For every instance of "Cost Code" 1000 Macro is to find value of "Material Costs" in that row (always column M) and value of "Labor Hours" in that row (always column P). Macro would tally all "Material Costs" for "Cost Code" 1000 and put that sum on a "Totals" worksheet page in a specified cell. Macro would do the same for all "Labor Hours" for "Cost Code" 1000.
So I basically have a template workbook that the code is stored in. I need it to pull an entire row if Column C in workbook "rawdata" contains specific text, in this case "PRCH - Purchase".I have never had to do anything like this before, it has always been working in the same workbook. It's failing at the 'mp = ...' line every time. There might be other errors in the code too, I just cannot resolve the first one!
I have attached a file showing what I would need the output to look like. I need to know how to search a range of cells (in this case column E) and if the day of the week is Wednesday to copy that entire row to the Worksheet titled Wednesday. I would do it manually but I have several thousand rows of data to get through, and there has to be a better way.
I have a workbook that has a total of 128 pages. The problem is that a lot of those pages won't be used. Basically I have a sheet that needs to be filled out for each day up to around 30 days, sometimes more, most times less.
Currently I have created all the sheets that I will typically need (31 daily's, 31 daily printable reports).
Data is entered into the daily (and other spots) and then with the use of formulas transferred to the report sheet which is hidden and then printable with the use of macros.
I also need to withdraw some of this information (CSV File) to be able to populate a database.
Is it possible to have my "daily" page as a template and then create the subsequent pages as I need them? (this would have to be done with a bunch of other report pages as well). For ease of use I would need all the formulas etc that I currently have to be able to be "created" as well. As an example, there is a running total of costs associated with the "daily" pages that would need to be carried forward.
I am creating a macro to create a new sheet that is a template that has already been created. I want to create a variable that references this new sheet so I can use it in a sum function.
Here is what I have:
Sub TotalSum() ' ' TotalSum Macro Sheets("Sheet1").Select Sheets.Add Type:="C:Users cweberDesktopNCR & NDE TEMPLATE.xltx" ' Dim WS As Worksheet
WS = ActiveSheet.Select -------> I want to reference WS as this newly created template.
I am trying to further automate the process of formatting my financial statements and am hoping someone might get me on the right track here. Currently I create 2 sheets, one called "MMM YYYY" (i.e. month year) and another called "General Ledger".
The process I am currently doing manually is creating a link between each line item on the financial statement and its GL account information on the General Ledger tab.
The description of each line item on the financial statement (the MMM YYYY tab) matches the GL account description on the General Ledger tab with the exception that the GL account description starts with the GL account number and then the description.
For example the "Utilities" line item on the financial statement needs to link to a line on the General Ledger tab that is "7071-45 Utilities".
In my mind I see the macro saying go to the next line and read what it says. Now go to the General Ledger tab and look for something that says the same thing excluding any preceeding numbers and make a hyperlink.
If it helps, I've uploaded a sample of one of the statements as I currently do them with the hyperlinks already set up. There are not any macros in this spreadsheet. If you'd like to take a look at it, you can get it here: ....
I am trying to use VB to create 50 charts each with 3 lines using data from 3 different excel spreadsheets in the same workbook. I am able to create one chart with 3 lines using data from the three spreadsheets, this is good. However I exprience problems when i try to insert a loop to create 50 charts that correspond the the rows in each spreadsheet. I am new to VB and am very inexperienced with VB. In each worksheet my data is arranged in rows. row 1 of each worksheet has the header information and rows 2 through row 50 have my corresponding data. for example A2 lists the name and F2 through T2 lists the data. I have tried a bunch of different things but nothing seems to alllow me to be able to create multiple charts which correspond to each row of data?
Sub Chart2PPT() Dim arow As Integer Dim acol As Integer Dim StartPoint As Integer Dim EndPoint As Integer Dim rStartPoint As String Dim rEndPoint As String StartPoint = 2 EndPoint = 4 For arow = 2 To 5 rStartPoint = "f" & StartPoint rEndPoint = "t" & EndPoint Charts.Add ActiveChart.ChartArea.Select ActiveChart.ChartType = xlLine 'Type of graph........................
I'm looking to create a dynamic invoice that has one main invoice worksheet that references a worksheet with client billing information. Keep in mind that line items will differ between clients, and ideally I'd want to be able to:
Have date autopopulate, included in every line item Select a client, which populates billing info as well as the invoice # nomenclature specific to that client Be able to have client line items specific to the client populate based on the dropdown I select
Overall, no real specific guidelines, just trying to pick some other people's brains about how to approach a dynamic invoicing template. To preface, we have about 60 clients.
I have a template document, created in MS Word. I want to generate, from Excel, a new document as would happen when you open the template from windows explorer or whatever ie. Template1.doc as opposed to Template.xlt.
The best I've managed to achieve is the opening of the template.
I want to create a standard template used for all commodities. To do this I have several columns that need to be on every quote and then depending on the commodity, a few other columns that need to be added in. I want to automate this so that I have a heading "Commodity" at the top and then a drop down menu with the different options (plastic, glass, etc.). Then once the commodity is selected the necessary columns will be inserted into the template. Is this at all possible using macros or anything else?
I'm trying to create a macro that creates new worksheets with buttons on them that have macros attached. I've been able to produce one worksheet with a button and macro, but when the function that copies the code is looped it crashes out of Excel.
I realise that the usual method of doing this would be by templates, but this code will be run on other people's computers so the template wouldn’t exist in the location that i had specified (I think with my limited experience with VBA - Please correct me if I'm wrong). I've also tried to copy the page with the button on, but this takes too long (even with screenupdating = false) as there are many sheets to be created.
This is a stripped down version of the code that I have created for the purpose of this forum. To recap, the function that creates a new page, with button, with macro attached works. It's when it's looped that it crashes out. I've stepped through the program, and it reaches the second message box, then it gives up on life ..........
