Create IF / LOOKUP Formula To Look At Multiple Sheets Within Workbook?
May 5, 2014
New to using Excel formula's and am trying to create an IF/LOOKUP formula to look at multiple sheets within a workbook and display the information within the 'compare' sheet.The yellow cells are where data will be entered.
What I am trying to achieve:
Type the store numbers on the compare sheet (B2 and D2). For the sheet attached I have put 190 (in B2) and 2012 (in D2)
B2 store shows the predicted and actual values of 190 in columns B & C
D2 store shows the predicted and actual values of 2012 in columns E & F
(No need to worry about variance and difference columns)
So, if I change the store numbers in B2 and D2 to any of the sheet numbers, I want it to display the correct info for that particular store within the compare sheet.
I have attempted a formula, which you can see... I have basically looked at some previous sheets that had IF and LOOKUP on it and tried to replicate that for my sheet, but with no luck.
View 3 Replies
ADVERTISEMENT
Jun 2, 2014
I wrote a code in unshared workbook and it works fine. But when i make it shared i get Run-time error '1004' Delete method of worksheet class failed.
The Deleting of worksheet only occurs once (when the new wb is created) so is there i can unshare and share it back when the process is complete?
View 3 Replies
View Related
Jul 16, 2012
I have been tasked with creating a macro which creates a new workbook wherein each sheet contains the information for one site from the active sheet. The active sheet already has the values sorted by the site such that all information needing to be copied from the active sheet into the new workbook is together.
I.E.
ATL
ATL
ATL
ATL
CEN
CEN
JCK
JCK
etc.
There are 8 different sites on the active sheet: ATL, CEN, DAL, HAR, JAS, JCK, VIS, NOV
The macro needs to find the range for all of the data of each site and copy/paste that data into a new workbook such that ATL would have its own sheet, CEN would have its own sheet, and so on. The data ranges from A:R.
So, for example, the macro would find that the last row with ATL in the "B" column is 6095 and would then copy A2:R6095 and insert that data into the new workbook under Sheet 1.
I had some code that I had adapted to select the range for each of them, but the code loops through the entire sheet (which is 44,307 rows long) for each site making it a quite clunky and very slow step in an even longer macro. Since the data is already sorted, I know there must be a way to have the macro stop searching when it reaches data not equal to the data the row before, however, my experience with VBA is limited, and I have been unable to find a solution. Also, the data does not have to be conserved after being sent to the new workbook, if that would speed up the macro.
View 5 Replies
View Related
Mar 31, 2009
I have a spreadsheet which has all the names of trips from a warehouse, the day that they operate (1,2,3 etc) and the job line allocated to each trip. It looks something like that:
A B C
DAYTRIPCUST
I would like to create a macro that will be creating 7 new workbooks and then in those workbooks as many sheets as the trips. In these sheets, the customers should be displayed.
How do I write it? I could not find how to have a "dynamic choice" in the macro. I.e. not to have the criteria as "1", "trips1" but to choose from the range of inputs that are available.
View 9 Replies
View Related
May 28, 2014
I have a Excel 2010 workbook used to rota in a large amount of staff for a call centre, which is split into four teams. Each sheet corresponds to a month of the calendar year eg Jan201, Feb 2014 etc..
What im trying to do is put in a sheet at the front of the workbook that I can select the team, which populates the list of staff in that team and then checking across a specified date range gives the shifts that those respective staff will be working for the set time period (probably be looking at a seven day period and a 1 month period). (This in turn will be printed out to give to the staff members.)
View 2 Replies
View Related
Nov 11, 2011
Sub Macro2()
Dim stgSheets As String, Cnt As Long
Dim arrSheets()
Cnt = Sheets.Count
ReDim arrSheets(Cnt - 1)
For i = 1 To Cnt
stgSheets = stgSheets & Sheets(i).Name
arrSheets(i - 1) = stgSheets
'sSheets = sSheets & "", ""
Next i
[Code]...
View 2 Replies
View Related
Feb 12, 2010
I have a workbook with roughly 28 tabs(sheets) and i need to be able to run a macro that will create a new sheet for each tab and name it based on the tab name.
View 9 Replies
View Related
Feb 18, 2014
I have a work sheet named "Main_List"...In column D starting with "D2" I would like to list worksheets that I would like to have printed via VBA.
The workbook has several hundred worksheets and I would like to list in column D only worksheets that I would like to print with VBA code.
View 3 Replies
View Related
May 3, 2013
I have two workbooks of clinical data: one main of 1,400,000 rows and one small of 30,000 rows. What I want to do is compare the entries in small to find out whether they exist in main. All I need is a TRUE/FALSE result.
Eventually I want to run a comparison of :
Unique number, surname, firstname, DoB and gender. (amusing, excelforum will not allow me to type ***). For now I am just trying to figure out how to do it with the unique number.
I have got the hang of using the vlookup function, but have now found that it cannot search across multiple worksheets. Main is spread across 16 worksheets.
View 2 Replies
View Related
Mar 12, 2008
I have a workbook that has separate tabs for each month. In cell D1 in each sheet is the first day of each month (1/1/08) then in E1 (1/2/08) until the end of the month.
In each sheets - the total for each day is in D30 then E30, etc...depending on which column the last day of the month ended up in.
Then I have a "Report" on using its own worksheet in the same workbook. I would like to be able to type in a date in cell F4 "Report" tab and then for cell A9 "Report" tab to be able to search through JAN D1-?, then FEB D1-?, then MAR D1-?, etc. until it finds the date. Then I would like for it to return the corresponding value found in D30 or E30, etc.
View 9 Replies
View Related
Nov 23, 2006
I'm having trouble looking up text from several worksheets. I've tried hlookup;
=HLOOKUP("H1", '1'!B6:O32,27,FALSE)
but get nowhere when text is in different sheets. I've attached simplified sample... lookup "H1" - holiday1 on sheet1 and return date to "Holiday" sheet. I've tried vlookup across worksheets code, but can't figure out how to customize.
View 2 Replies
View Related
Apr 11, 2007
After going through multiple threads in the forums, I got this code to do a multiple VLOOKUP method.
=IF(E2+F2=0,"",INDEX(C2:C10,MATCH(1,(A2:A10=E2)*(B2:B10=F2),0)))
It works perfect on a sample sheet. But when im trying to implement it in a sheet with too much data, it always fails.
I have attached the sheet I am trying the formula on. I have grayed down the columns which needs formula's. The data is picked out from the second sheet.
This is how I have modified the formula to suit me..
=INDEX(Data!$G$2:$G$663,MATCH(1,(Data!$A$2:$A$663=$C2)*(LEFT(TEXT(Data!$E$2:$E$663,"mm/dd/yy hh:mm:ss"),8)=$I2),0))
<<Please note that all the dates and numbers in the sheet are in "text" format for ease of use>>
View 9 Replies
View Related
Feb 7, 2014
I am looking for a code that would copy the data from each worksheet in a given workbook and then paste to just one worksheet within a different workbook. The Sheet names are auto generated when I run this canned report but the naming structure is always the same...the first worksheet is named Repair Details and then the next sheet is named Repair Details_1, the next sheet is named Repair Details_2 and so on for every sheet in workbook. So I would like to copy all of the data(Headers to last cell) and then paste in a worksheet(ex: Master Repair Report.xlsx and the worksheet could be titled Master Repair Details) on a different workbook, then the next sheet would copy from the one under the header to the last record and paste to the same workbook. This process would repeat for every worksheet in the Repair Details Workbook and paste to Master Repair Details worksheet in the Master Repair Report workbook.
View 4 Replies
View Related
Feb 10, 2013
I had created a base data with evaluator and performance appraisals templates which should be sent to each evaluator for filling up the forms based on templates
Next,
Macro that would i require will be
Where in my base data if i select filter of "Arun", i will performance appraisal templates in column I. Next, i have sheets individually created templates which refer column I
So, based on arun filter if i select, it should create a new workbook for arun and six individual sheets of employees reporting to him with a base data and appraisal templates similarly if i select anita in filter , it should create a new workbook for anita and six individual sheets of employees reporting to her with a base data and appraisal templates
View 9 Replies
View Related
Apr 14, 2014
The macro creates multiple charts from data in one sheet, but now when I'm trying to scale it up to multiple sheets, the previous charts created disappear. E.g Creates 5 charts for sheet 1 (can see them being created, using debugger mode), looping to the next chart and they are created but the first ones has disappeared! What am I doing wrong? I'm creating my chart by the following code:
[Code] .....
The startpoint variable is changed for every new chart within the one sheet and the outputsheet is changed when you change the sheet.
View 4 Replies
View Related
Jul 16, 2009
i have a master Sheet which have 15000 Entries (A:A15000) many are Duplicate, Unique is 63 . Now i want to make the 63 Sheets in a Same Workbook as per these Entries.
I record the Macro for the first 7 Sheets. Now how can I Modifiy this Macro to 63, Instead of record again for another Entries.
Actually, I have recevied a File some time it has 15000 Company Names sometime 20000 and sometimes 2000, Now i want to Make the Sheets according to Company Name Wise.
Now , i know how to record the Macro, but i want to know how to Modifiy the Macro.
" How to Learn and Modifiy the Macros"
My code
Sub CreateSheets()
'
' Macro1 Macro
' Macro recorded 7/16/2009 by AAditya
'
' Keyboard Shortcut: Ctrl+w
'
View 9 Replies
View Related
Feb 4, 2014
So I know vlookup wont work for this, I could do an array index but that wouldn't easily return exactly what I need.
I have two sheets in the same book. One has three columns
Area
Room
ID
A-1
1101
BG11
A-1
1101
BG12
A-2
1102
BG12
The other has a bunch of columns with different information for the ID field
ID
INFO
INFO
INFO
ETC...
[Code]....
Sheet1 with the three columns will often have multiple rows for the same ID z with different room/area infor. Sheet2 only has one instance of each ID.
What I would like is something, either macro or in a straight formula that will merge both of these. I'd like to add the Area and Room columns to the second sheet (or merge everything into a third sheet) while keeping all the other info and having repeating lines if the ID shows up more than once.
Result:
ID
AREA
ROOM
INFO
INFO
INFO
[Code].....
I explained this well enough
View 7 Replies
View Related
Mar 18, 2009
I have a file with multiple sheets. Most of the sheets are named for states. I will import a worksheet monthly that has sales data that needs to be copied one line at a time and pasted to the correct company on the sheet that corresponds to the appropriate state. I want to do this by macro.
Here is what my sheets look like...
Arkansas
A B
Comp1 $1000
Comp2 $2000
Louisiana
A B
Comp3 $500
Comp4 $1000
Sheet3 - Import
A B C
Comp1 AR $500
Comp3 LA $500
Comp2 AR $500
What I want is a macro that will read each line in Sheet3 and depending on the state in column B, copy/paste/special/add the value in column C to the amount in column B for the corresponding company on the sheet for that state. In other words I would like to see..
View 9 Replies
View Related
Jan 13, 2008
I came across a code on your website that looks across numerous sheets and stops at the first match. I have a similar need but only i do not want the code to stop when it has found the first match. I want the code to lookup from 1 column in 1 sheet to another workbook with 20 odd sheets, then want it to return a findings report or show all matches.
View 3 Replies
View Related
Apr 5, 2013
how to create multiple sheets ? in a workbook if i want to create multiple copies of the same sheet, what is the shortcut method to do that?
View 5 Replies
View Related
Mar 5, 2014
I got an employee list from couple of Site in different sheets it contains Employee name & Department but not a continued list, i.e.
on the attached file, i am looking to populate Summary Sheet, no of Sites, deparments & agents varies.
I want the Site, Department & Agent Name to Populate into one continues list without empty cells .
View 4 Replies
View Related
Aug 5, 2012
I am using MS Office 2010. I want to count---on multiple sheets---the number of times that a given cell is greater than another cell if and only if a third cell is equal to a given value. I want to do this for 4 sets of data on each sheet. I thought I had it figured out with this formula---
=SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$R1"),2*(AND("'"&$H$1:$H$43&"'!$E1">"'"&$H$1:$H$43&"'!$F1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$S1"),2*(AND("'"&$H$1:$H$43&"'!$G1">"'"&$H$1:$H$43&"'!$H1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$T1"),2*(AND("'"&$H$1:$H$43&"'!$I1">"'"&$H$1:$H$43&"'!$J1"))))+SUMPRODUCT(COUNTIF(INDIRECT("'"&$H$1:$H$43&"'!$U1"),2*(AND("'"&$H$1:$H$43&"'!$K1">"'"&$H$1:$H$43&"'!$L1"))))
but it returns a value of zero each time. Clearly there is an error in the formula.
Here is some background:
-- $H$1:$H$43 is a block of cells that has the names of the sheets in the workbook
-- E1 and F1, G1 and H1, I1 and J1, K1 and L1 are the four groups of cells that I am comparing.
In the entire workbook, I want to add 1 (counting function) only when:
R1=2 AND E1>F1 or
S1=2 AND G1>H1 or
T1=2 AND I1>J1
U1=2 and K1>L1
on each appropriate sheet in the workbook.
View 1 Replies
View Related
Jul 8, 2014
I am looking for a formula that will add some numbers for me on different sheets based on a sorted option that I choose on my Summary tab. sample survey (1).xlsx Here is a sample workbook with what I am looking for.
View 3 Replies
View Related
Apr 27, 2014
I need new workbooks based on category name in the below list. Respective sheets should be copied from the existing workbook with items as sheet names. List can be updatable.
category(workbookname)Items(sheets)
Vegetables carrot
vegetables brinjal
meat chicken
meat Fish
meat Mutton
grains Wheat
grains Rice
View 4 Replies
View Related
Mar 16, 2008
I have about 20 workbooks with different file names for different projects all saved in the same folder. Each workbook has about 10 worksheets and each worksheet is named in a similar fashion in each of the 20 workbooks (eg. revenue, cost, variance etc.). I want to pull out a worksheet named ' forecast' from each workbook into a master workbook so that the master workbook would contain the 20 forecast worksheets.
View 9 Replies
View Related
Mar 13, 2014
I have CASHBOOK Worksheet and I want to create a LEDGER Account in Multiple sheet
View 2 Replies
View Related
Mar 4, 2014
My boss requires me to prepare forms for vouchers that we release to our suppliers.
I encode the details manually to excel with his prescribed format. each voucher are encoded on separate sheets on one file.
Now he requires me to prepare a summary for all the voucher forms which is now becoming a pain since i now hold 50+ suppliers. and each day i encode about 120 vouchers.
I found through this forum that there is a way to automate tasks on excel like preparing a summary sheet.
View 3 Replies
View Related
Aug 19, 2009
I have data contained in matching cells from several sheets. I need a worksheet that reflect the summary of the data from the worksheets. No formula is required. I just want my summary worksheet to list the all the data from my other worksheets. I might end up having about a hundred worksheets that I need included in the summary. Attached is a sample. It would be better if the summary automaticaaly updates as new worksheets are added.
View 3 Replies
View Related
Dec 16, 2009
I need to combine the category sheets back into one main table, knowing that there may well be an increase in the number of categories, as well as the number of rows in each category sheet.
I have attached a sample workbook - if anyone can help me with the code so that when the macro is run, the data in sheets A, B and C are combined into Main Table.
the macro would also then update the Pivot table, that would be the icing on the cake (I have shown the pivot table configuration I need, in this case using only the data from sheet 'C', for reference)
View 6 Replies
View Related
Nov 10, 2011
I'm trying to create a workbook with multiple worksheets. My first sheet to be named "Main" and each additional sheet to be named in sequence after the values in the cells between B5:B98 on !Main.
Example:
B5 = "01"
B6 = "01.1"
B7 = "01.2"
B8 = "02"
B9 = "03"
etc...
I'd like to have a macro that would take a worksheet in this workbook named "Template" and make a copy for each cell between B5:B98 and name that new worksheet "c" and then the value in each of those (B5:B98) cells.
Example:
First worksheet named "Main"
Second worksheet named "c01"
Third worksheet named "c01.1"
and so on.....
View 1 Replies
View Related
