Macro To Encode In Last Blank Cell Up To Last Used Row
Jun 24, 2014
I have a worksheet that contains data but column E has blank cells. i want to automatically encode on the last blank cell in column E up to the last used row.
I am using the ff. code to select the last blank cell in column E:
Range("E1").End(xlDown).Offset(1, 0).Select
I am using the ff. code to select the last used row:
ActiveSheet.UsedRange.Rows.Select
but it doesn't work.
In my excel file, all i want to do is to encode "ECASE-UNUSABLE-UPD" in cell E61:1549 , wherein E61 = is the last blanck cell & E1549 = is the last used row.
I am trying to make an encode/decode function to use in excel from base64 to array of bytes
I want to put string encoded in base64 in cell1 and get result in cell2 with decoded array of bytes and vice versa i find some codes [URL]....
and a code here
[URL]....
using the code above to convert A1 A1 = a03060fa564665 ENCODEBASE64(A1) -> YTAzMDYwZmE1NjQ2NjU= (which is correct result for string "a03060fa564665" not the array of bytes) while correct result i need is oDBg+lZGZQ==
i know the issue is converting string to array of bytes but i couldn't fix it myself
example if cell1= a03060fa564665 result1= oDBg+lZGZQ== if cell2= oDBgm1BGaQ== result2= a030609b504669
I am looking for a macro that will go to the next blank cell in the column starting at B3 and if none are found going to the next sheet(sheets are january-december). The twist is that I need it to change sheets when there is nothing in column A(which has dates and times in it) then go again to the next blank cell in the following sheet starting at B3.
I have a macro that runs when the user clicks on a button. I want it to run when a particular cell has data in it - after the user selects an item from a drop down. How can I make the macro trigger based on a cell being non-blank?
I have a spreadsheet where I had a new column on a daily basis. I am trying to create a macro to automate some parts of this. I would like to select the next blank cell on row 1. So in this instance, cell M1, however the following day it would be N1. This is the part I am unsure of how to do. After this I will be doing a vlookup to add the new values, which I should be able to sort out no problem.
I have seen people using COUNT and OFFSET to select the last cell +1, however I am unsure how to link to two together.
I am try to write a bit of code which will find the non blank cells in column H (Range H4:H24) and when it finds a non blank cell make column C in that row the active cell and then run a macro. Once the macro as been run i would like it to look for the next non blank cell.
I have searched the forum a few times and haven't seen an exact example of what I am trying to do, so I hope this isn't a duplicate.
I am looking for a macro to copy a cell and autofill it down the column until it gets to a non-blank cell. When it reaches that cell it needs to then copy THAT cell down until it reaches another non-blank cell... this could happen just a couple times, a couple dozen times, or only the very first time.
So for example:
In cell B2 there is text "Data1" In cell B13 there is text "Data2" In cell B25 there is text "Data3"
I would like the macro to search column B to find "Data1", and then copy it down the column until it reaches B13, then copy "Data2" down until B25, where it would then copy "Data3" down until the end of the document. The location of the data in column B varies, and the number of cells with data in column B will vary as well.
How can I have my macro run in its cell and still allow the cell to be blank? Say I have a number, 0.99, in the cell and I want to delete it and leave it blank. I can either push "Backspace" or the delete key and it still leaves zeros.
If I push the space bar it stops the macro (which I do not want to happen) and leaves the cell blank because I added a space.
I am trying to write a macro that will do a bunch of stuff then go to the next blank cell in a particular column.
The rest of the code for the macro is irrelevant I just don't know how to code it to find the next blank cell in the column. It could be anywhere from cell A2 to A1000000. Basically I want the macro to select the cell that is next on the list to enter data into.
I need a VBA macro for filling the blank cells in whole column "D" with some conditions.This condition work for whole column.
ABCDCN EA Polymer
DE MA Polymer Medium CN EA Polymer
Fill the blank cell in D column with "Easy", if Column A is "CN" and column B is "EA" Fill the blank cell in D column with "Medium", if column A is "DE" and column B is "MA".
After Run the macro: i.e ABCDCN EA Polymer Easy DE MA Polymer Medium CN EA Polymer Easy
I was used "if" condition but I can't able to run.
I'm trying to record a macro that is using vlookups to get data from another data sheet, this data sheet will update each month - the old data moving back a column (so the new data is filled into the same column each time).
However, on the sheet where i am recording the macro, i need the data to fill in the next column each time.
I have a small challenge, where I am trying to fill blank cells with the data from the last populated cell above.
However, I need it to be able to automatically recognise when a manual entry has beed actioned down the column and recalculate for below that cell with the new data.
The data in the cell is selected from a drop down. I want it to populate all the cells below, until the next drop down is selected. And automatically repopulate them all when it is selected.
E.g. Cell C8 has the value "DATA" selected, and everything below is autofilled with "DATA", but when I select cell C12 with different drop down list value "VALUE", all the cells below stay as "DATA" because they are obviously no longer blank.
What I need if C9 - C11 to remain filled with 'DATA" and from C13 to auto fill with the newly selected value "VALUE".
Need this to happen for as many rows and data selections from the drop down as needed (endless).
I have used:
Code: Sub FillEmpty() Application.ScreenUpdating = False Application.Calculation = xlManual Dim cell As Range For Each cell In Intersect(Selection, _ ActiveSheet.UsedRange) If Trim(cell) = "" And cell.Row > 1 Then cell.NumberFormat = cell.Offset(-1, 0).NumberFormat cell.Value = cell.Offset(-1, 0).Value End If Next cell Application.Calculation = xlAutomatic 'xlCalculationAutomatic Application.ScreenUpdating = False End Sub
which does the auto fill, but won't change the cells below once one of them has been updated.
Info:
Drop down list has 31 possible selections at the moment
Starts at Cell C8
Needs to be flexible enough to add an indeterminate number of rows, and additional items to the drop down selection.
i have created a spreadsheet to simplify our work flow, I am stuck on what is probably the easiest of the commands.
basically have rows dedicated to specific codes and the colums represent values relating to each code, all codes have a different set of values, the attached example only has a few variables but the actual worksheet will have several hundred.
the idea is the user will input the code they wish to get details on in A2 and then press the command button and it will then show (as per the after sheet in the attachment) just the relevant information for that code, so filter the code in column A and hide the columns which hold no value.
where i am getting stuck is I am not sure the best way to proceed, is it best to create the macro button to do the filter and hide or is there a better way using vlookup and a pop up window asking for the relevantcode to be inputted to to retrive the information, again understand there will be hundreds of colums and hundreds of rows and the values may be 20 or 30 colums apart for some of the Codes so this simplification is really saving the user a lot of time.
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
I have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
I presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
Im currently writing a payroll sheet within excell and trying to write an IF statement to make a cell blank if referring to another blank cell but it is showing the formula is incorrect. Below is the following IF statement that im using;
My workbook is for financial planning but I'm attempting to streamline an input page (name, birthdate, etc) that will be referenced throughout the entire workbook to trigger automatic calculations (present value, education calculations, etc).
The cell in the input page is a birthdate - which when populated will trigger a cell on a different worksheet to calculate the respective age using this formula:
The problem is if there is nothing written in the birthdate cell then the age cell will automatically calculate 114 (reference photo below). Ideally I'd like that cell to be blank if nothing is in the birthdate cell on the input worksheet. I'm assuming since I'm using an IF formula to calculate the age already then I'll need to use a macro to to an "ignore".
in one column of my spreadsheet and it is returning the correct concatenation for the appropriate lines. However, I wish to have the column's cells return an answer of blank (" ") if B15, B16... etc is blank. In other words, at the moment, a correct answer would read something like '1810sd0000' C10 and B15 used, while an incorrect answer would still display '1810', but I want it to be a blank cell.
I need to combined all non blank cells in a given row into 1 cell. But within each row i have 5 phases that the values fall into, which is denoted by the 1st charter 1, 2, 3, 4, or 5. for example, in a given row i have 1-a, 1-c, 2-d, and 1-f and these values occurs in non consecutive columns starting from G to ALR. I need a macro that sorts these values in one of the 5 phases. So in another sheet the macro would combined [1-a 1-c 1-f] in Phase 1 and [2-d] in phase 2. and if there are other phases it would put them in the appropriate cell.
See attached workbook : Work Order Summary Sheet.xlsx
