I need a macro to go through one column until it hits a blank cell and stop... the criterea of the loop:
if cell = "Multi" then **Move to X tab** else **move to X2 tab**
This is for a template for teachers to analyze student testing data. On sheet4, wrong answers in each column are noted by a lack of a + in the corresponding cell. I want to paste the names of the students who missed each question into sheet 5.
I've done it by repeating a filter macro, but I manually copied the following separately for the 75 columns in the template.
Problem #1 - there must be a more efficient code, something that automatically loops to the next column
Problem #2 - the template has 75 columns, but many tests have fewer questions. I'm trying to find a way to stop the loop whenever it hits a blank cell in Row 10 on sheet 4. I've done it with an if/then in the last section on the above code, but where I'm at now, i would have to add that to the code section for each column. Which isn't that big a deal, but I figure there must be a better way.
The relevant portions of the workbook are attached here.
repeating macro until hits blank cell sample.xlsm
the following macro works great if there is data below cell O4. but is there isn't any (e.g., at the beginning), then the cursor runs down to 65,536. ?if no data exists, how can i stop at cell O5...
Range("o4").Select
'Range(Selection, Selection.End(xlDown)).Select
Selection.End(xlDown).Select
ActiveCell.Offset(1, 0).Activate
I am looking for a Macro that will search a column for blank cells, and when one is found will add text to the same row in another column. For example: The below is a spreadsheet. I am trying to find something that will search through column "C" in this case and add text (of my choice) to Column "A" if the cell is Blank. So Since cell C1 is Blank then Type "ERROR" is cell A1.
A B C D E
1 X X X X
2 X X X X
3 X X X X X
4 X X X X
5 X X X X
The code down below counts all cells from column A2 to I11. The problem; the code should stop counting if there is a blanc cell in a column and go to the next column to countinue. My query; how should the code be modified so it will stop counting if there is a blanc cell.
View 4 Replies View RelatedIn an Excel 2010 worksheet I use three columns. I need a user to be able to input a word or phrase into a cell or input box, and have Excel highlight that word or phrase every place it occurs only in column C.
Can I do that with conditional formatting? Or do I need to use a function? Or do I need a macro?
I am running a Vlookup on a large set of ID#'s that exist accross multiple servers.
The data is structured in (2) columns how you see below , and you will notice that the same ID# can show up on multiple servers.
However, the VLOOKUP is only returning the first match it finds.
Assuming that I want to keep the data structured as is, how do I make the vlookup return all matches?
ID# LOCATION
23 SERVER1
34 SERVER4
23 SERVER2
13 SERVER1
17 SERVER3
34 SERVER1
I am trying to write a macro that will do a bunch of stuff then go to the next blank cell in a particular column.
The rest of the code for the macro is irrelevant I just don't know how to code it to find the next blank cell in the column. It could be anywhere from cell A2 to A1000000. Basically I want the macro to select the cell that is next on the list to enter data into.
I need a VBA macro for filling the blank cells in whole column "D" with some conditions.This condition work for whole column.
ABCDCN
EA
Polymer
DE
MA
Polymer
Medium
CN
EA
Polymer
Fill the blank cell in D column with "Easy", if Column A is "CN" and column B is "EA"
Fill the blank cell in D column with "Medium", if column A is "DE" and column B is "MA".
After Run the macro:
i.e
ABCDCN
EA
Polymer
Easy
DE
MA
Polymer
Medium
CN
EA
Polymer
Easy
I was used "if" condition but I can't able to run.
Short and simple. What is the quickest, easiest & most efficient way to find the first blank cell within a column using VBA?
my excel sheet runs through a lot of calculations, opens Flowmaster, a simulations program, passes on data, receivs data and so on. Is there any way to have a user input to stop the whole simulation. During the first tries I had a lot of break point in my debugger. But now I want to have a button to hit or better just some keys to hit to stop it without using the ctrl+alt+del which closes everything.
View 4 Replies View RelatedI am trying to use a macro to check if any cells in a range of cells are less than 0 before proceeding.
VB:
Sub Macro()
If Range("F2:F49") < 0 Then
MsgBox "Please verify column F."
Exit Sub
[Code] ....
I have the following macro
Code:
Sub del()
Dim myRange As Range
Set myRange = Range("AK3:AL3" & Range("AL" & Rows.Count).End(xlUp).Row)
For i = 1 To myRange.Rows.Count
If myRange(i, 1) >= myRange(i, 2) Then
myRange(i, 1) = ""
myRange(i, 2) = ""
End If
Next i
End Sub
How do I add a condition that will stop the macro if myRange = ""/is empty?
I have referenced data in two colums on a sheet A and B. Column A contains the latest data, each month i insert new column (moving column A to column B). However all of my references continue to follow the original data (eg will change from column A to column B). this happens despite using Absolute references. (=$A$1). Is there a way to lock these cell references to only ever display column A etc?
View 2 Replies View RelatedI have checked archives, some similiar but not quite what I want.
In code below I want the output instead of going offset one column to right in same row to go one column to right into the next blank cell.
the code below works fine except for the fact that it takes FOREVER to complete as it has to loop through almost 2000 rows... How to optimize this code so the macro stops as soon as it encounters an empty cell? There is currently only 50 entries in the database, but with time it will exceed 1000 entries and therefore i can't simply say Range("H2:H50").
Code:
If OptionButton1.Value = True Then
'Show all Car Cases
Sheets("User-defined Database").Activate
For Each cell In Range("H2:H2000")
[Code]....
I have a master sheet and 20 sub sheets. I input data in the master and it filters through to the 20 subs and calculations are done. the problem is that on the master there are blank cells, that need to remain blank cells until i put the data in. This data is copied to the subsheets using a =sheet1a1 type of formula. what happens is when a blank cell is copied it appears in the new location as a 0. I need this to remain blank as the 0 causes calculations that I don't need and mess up a lot of the data I need. Is there a way that when it copies the new location remains blank until the data is inputed in the master sheet?
View 7 Replies View RelatedI tried to reduce the size of the printing area by deleting the blank rows. To achieve this I entered VBA code that appeared in the newsletter issue 3 after slightly modifying the code suiting to my need. But, while exeucting the code with all the parameters, xlCellTypeBlanks, xlCellTypeFormulas,xlErrors, the error as shown as a screen shot herein is populated. But, with the parameter,""xlCellTypeBlanks"" all the Blank Rows only got deleted and similarly only those rows containing Formulas are deleted, while the parameter is""xlCellTypeFormulas".
I want all the cells that contain xlFormulas, xlErrors and xlCellTypeBlanks as well be removed while executing the code given herein. But, if the range contains "xlFormulas" and "xlCell TypeBlanks", the rows containing blank cells are not removed and vice versa.
I have workbook that has questions on column K and L that NEED to be answered. When the user closes the spreadsheet I need the macro to create a pop up that says "unfinished Workbook"
So I need a macro that tells the user to finish answering the questions on K and L -
i am creaing a chart in excell but i have a problem. i would like to have a chart like this one http://shrani.si/?screenshotow31.jpg. but when i create my chart it looks like this http://shrani.si/?screenshotow2t.jpg. first chart is created with some macro so i dont know how is it working but i think the problem is in blank cells because if cell is blank the chart line will go to 0 but i dont whant that :s
View 2 Replies View RelatedI have a VBA code that when activated it copies 6 cells from sheet1 to the next available row in sheet2 - A2:F:2.
alerting and stopping the routine if any one of the cells in sheet1 are empty so the user has to input into all cells before the routine will execute.
does it need a check cells for content if error highlight empty cell.
A
B
1
Name
Action
2
Joe
Created
3
Bob
Approved
4
Cindy
5
Jane
6
Dave
7
I am trying to come up with a code that will copy column A entirely, and insert the copied cells into the first blank column. In the columns with information in them, there will always be text in the first cell, so that can be used as the test to find the first blank column, but I'm not sure how to get this done for my macro.
View 12 Replies View RelatedI have a graph / time problem
I have a program that is spitting out raw data to me that I would like to be able to put into a graph form in a efficient manner, but I’m not sure the best way to accomplish this.
Here is what I’m working with:
I am getting a list of time date stamps that appear as follows.
11/30/2006 6:02:25 AM
11/30/2006 6:02:36 AM
11/30/2006 6:02:40 AM and so forth.
Each stamp represents a hit to a link.
What I would like to be able to do is graph the number of hits per hour verse the time of day hit. Showing the time on the x & the number of hits per that hour on the y axis.
I can convert the time to decimal, but I still need to find a way to get excel to graph the sum of hits per hour.
I am working on a spreadsheet that hits an external site. My questions is, I need to hit the site about 80 times becuase I search for different info. It there a way to get the vba to go down a list 80 of names rather than me entering the vba code 80 times with the different names?
I am trying to write a macro to do the following:
Search column "I" for blank cells. If one is found then all adjacent cells to the left in that row are shifted to the right by one. (in other words for that row cells A-H are shifted right to become cells B-I).
Search column "I" for blank cells. If one is found then all adjacent cells to the left in that row are shifted to the right by one. (in other words for that row cells A-H are shifted right to become cells B-I).
View 2 Replies View RelatedSo this is what I am trying to do, I have a column in my data that is for telephone numbers. When I receive the file some of the fields are blank in that column. I need to add to my current macro a part that evaluates the column for blanks and adds a static telephone number in the blanks (up to the last row of data in the file). I have been able to accomplish this with the following:
Range("N2").Select
Range(Selection, Selection.End(xlDown)).Select
Selection.SpecialCells(xlCellTypeBlanks).Select
Selection.FormulaR1C1 = "1112223333"
However, when the file that I receive has a telephone number in all the fields the code breaks at this point. I have tried On Error Resume Next, but that just replaces all the remaining cells in the column with the static 1112223333..
i need a code that moves down a column and for every empty cell in the column the cell to the left is cleared and then it moves on to the next cell down. the column is not always the same and will start from a selected cell, and the column will contain no more than 5 rows
View 3 Replies View RelatedI need a macro to find the last cell in the column, then copy the formula to the next blank cell. Then, it goes back to the last cell (above) and paste's values. Then, go to the next column and repeat the process. I can do this but have to call each cell separatly...however, I would like to do it in a loop to simplify things. It would be great to even be able to just set the start and ending columns. Here is my current code:
Dim rng As Range, aCell As Range
Set rng = Range("C8, D8, E8, F8, G8, H8, J8, K8, L8, M8, N8, O8, P8, Q8, R8, S8, T8, U8")
For Each aCell In rng
Selection.End(xlDown).Select
Application.CutCopyMode = False
[Code] .......
It does not go to the next column, instead it stays in the same column and repeats the process.