1. I can create basic macros .. but how do I write a macro to hide a range (of 10 rows) named "dmargin". That for my button no. 1.
2. How do I write a macro to unhide the named range "dmargin" for my button #2.
I tried using VB codes to achieve both conditions -- it works but it either continuously protects or unprotects my ws -- so I think it is better to use a low level codes (macro buttons).
I have a graph in Excel containing the 12 months in column 'A' and data associated with each month in column 'B'. I want to hide rows containing months which have yet to arrive (eg: if we are in August, I want to hide the rows containing September:December). However, I want to change the range of rows that I hide each month (so that when we get to September, I only hide rows containing October:December). My attempts at writing a macro to perform this automatically have failed? This is the script I have written:
fyi - RowStart is the row number associated with January, RowEnd is the row number associated with December and RowNext updates each month and is the row number associated with the next calendar month.
Option Explicit Dim RowStart As Integer Dim RowEnd As Integer Dim RowNext As Integer
Sub Hiderows() RowStart = sheets("month").Range ("A1") RowEnd= sheets("month").Range ("A2") RowNext = sheets("month").Range ("A3") Sheets("month").Select Rows("RowStart:RowEnd").Select Selection.EntireRow.Hidden=False Rows("RowNext:RowEnd").Select Selection.EntireRow.Hidden=True End Sub
I found several examples on google, but unfortunatly it conflicts with another macro I use for forceing users to enable macros (hide all sheets except one if macros are disabled).
The attached file is an example contaning the save&close code and the show/hide sheets depending on macros enabled.
If the file is opened with macros disabled then only one sheet will be visible. If the file is opened with macros enabled other sheets are visible.
The problem if that this code uses a custom save, witch makes the save&close not save... (in module1 and in ThisWorkbook)
The pourpose of the save&close is to make sure some users don't forget the excel open and thus block access to it. So if a certain idele time passes excel has to save and close without any confirmation messages.
I have 2 macros one hides a selection of rows and the other unhides them. What i want to be able to do is when an IF function is true then macro 1 (hide) is used. If the function is false then macro 2 (unhide) works. There is a code in VBA
I am creating a form in excel and need to hide a selection of cells, not an entire column, or an entire row, but the cell range K43:K48. I want these cells to be hidden at all times unless any one of H44:H48 has the value "Other" inputted.
If Other is selected I want range K43:K48 to become unhidden. Is there any way to do this?
I have tried to use Conditional Formatting to do this, but only being able to use 3 conditions makes it harder to do when I have a range of 5 cells that could display "Other:"
Can't seem to find a solution searching through various forums searches. I would like to hide all blank rows within a Named Range : Range1 (A1:E8).............
I have this code (compliments of VBA Noob) which hides all blank rows within a range ("Range1") P16:V650. It works great in a new worksheet with little amount data, however within my heavy worksheet, it takes over a minute to compile.
I am familiar with the custom formatting option to hide cell contents when you don't want them displayed in either a chart or when printing: Custom > Type > ;;
I was trying to create a macro that will search a specified range and whenever there is either a zero or nothing displayed in the cell (even though a formula exists), I want to custom format the cells to not be displayed.
My range is Range("B5:I16")
I tried to create something like
Code: Dim dataRange as Range Set dataRange = Range("B5:I16") For each Cell in DataRange if Cell ="" then Selection.NumberFormat = ";;"
I'm struggling to figure out how to tell Excel to step through each cell in this range, evalaute whether there is a blank and if so, apply the NumberFormat ";;" to it, otherwise let it be.
I have a file with four columns of data that represent quarterly figures. I would like to hide the entire row if all four quarters are blank. The cells I need to check are P, Q, R & S and the data begins with row 21. I know how to get the last row in the range.
With my searches i manage to make this working code:
Code:
Sub Hide_Rows() Application.ScreenUpdating = False Dim Rng, os1, os2, os3, os4, os5, os6, os7, os8, os9, os10, os11 As Range Set os1 = Range("B11:E63") Set os2 = Range("B64:E116") Set os3 = Range("B117:E169") Set os4 = Range("B170:E222")
[Code]...
In any range (os1 to os11) all empty rows are hidden... ok! But, every range have 2 first rows as headers that i want to hide (in case of no data below) before print!
I'm trying to hide all rows from row 3 to a variable row. I've struggled to simply select the rows that I want to hide. I have managed to select a range (containing the rows that I want to hide). I now need to select the rows contained in the range currently selected and then hide them. My code is as follows:
I am trying to hide columns within a named range, where the range corresponds with the values section of a pivot table.
My code hides an unexpected set of columns. It seems to be affecting a different range, depending on the number of columns in the pivot table, which is not part of the named range, as if there was some kind of offset.
Sub hideAll()
With ActiveSheet.Range("wholeyear") .Range(.Columns(1), .Columns(12)).Hidden = True End With
I want to filter and then hide the filtered output in a range of data. But after I hiding, when I remove the filter, everything is there again. I don't know how to hide it even filter is removed.
I have Cell C63 in Worksheet 1 which is set up to say either "YES" or "NO" depending on whether a value on a different worksheet exceeds a value in an adjacent cell or not (also on that worksheet). The formula I am using is simply:
Essentially I don't want anything displayed if there are no data in the range C4:C54 on Worksheet 1. I thought I need a nested IF function but I couldn't get this to work.
I am looping thur an array to Format A range of cells. After the format is complete I need to validate that all of the cell in a range are empty if so hide the whole Column.I was Try to do it like this. I am not getting an error but nothing seems to happen either. Also The Boder of the cell only appers on the Last cell it should be on the cells....
Having a problem with a survey I'm creating in Excel.
I have a question with a Yes/No response cell. I want to show/hide several rows below it. The problem is that these rows also contain 6 option buttons, which I also need to hide/show depending on the response cell.
Is there a handy way to hide all of these shapes/controls in the defined range, and then "unhide" them if the cell value changes back to "Yes"?
I have several workbooks, and the workbooks can include several sheets. Is there's an easy way to create a macro so the user selection to be hidden or unhidden is hidden or unhidden in all sheets in the workbook. E.g. if the user selection is to hide rows 54-189, the macro hides rows 54-189 in all sheets in the workbook.
How do you select certain ranges in the same column to filter? The ranges I need are "c36:c50" & "c54:c68" & "c72:c87" & "c91:c155" & "c158:c172" & "c176:c202" all filtering for blanks. I can not filter from c36:c202 because there are blanks in the missing rows and they have to stay.
I have a spreadsheet with a number of sheets two of which contain tables with many columns with a date heading, I would like a means for the user to select a range of dates and for the spreadsheet to automatically hide any columns that don't fall within this range.
I've been trying to put together some code to hide a range of rows on one page based on cell values on a different page. So basically Sheet1 cell A1 value is 10, A2 value is 20. When macro is run via button rows on Sheet2 from 10-20 would be hidden. The issue is the values in the cells on Sheet1 will vary. I thought something like the following would work but it doesn't.
I am very new to VBA. I need to have a code that will hide/unhide cells based on a date range.
Cell A1 contains the formula for todays date, based on that answer, I want to hide/unhide columns based on a weekly date range.
Ex.:
Today is 03/18/2014 I want excel to say If A1(Today) is greater than 03/14/2014 and less than or equal to 03/21/2014 then unhide column E and hide the rest.
Then let's say Today is 03/22/2014. I want excel to say If A1(Today) is greater than 03/21/2014 and less than or equal to 03/28/2014 then unhide column F and hide the rest.
I need some VBA code to hide columns if they are outside of a specified date range.
- the worksheet i need to run this VBA on is named 'Summary' - Columns A to G need to remain un-hidden at all times - from H17 to ZZ17 i have every month of the relevant years listed (all there chronologically) - D3 holds the 'Date From' variable - D4 holds the 'Date To' variable