I am looping thur an array to Format A range of cells. After the format is complete I need to validate that all of the cell in a range are empty if so hide the whole Column.I was Try to do it like this. I am not getting an error but nothing seems to happen either. Also The Boder of the cell only appers on the Last cell it should be on the cells....
View 3 Replies
Using the following code to remove empty rows based on whether a specific range of columns is empty. The code works if the cell has a zero, but not when the cell is blank. An example of the data is attached.
VB:
Public Sub DelRows2()
Dim Cel As Range, searchStr, FirstCell As String
Dim searchRange As Range, DeleteRange As Range
[Code].....
I have code which will hide columns L to AA if cells are empty. It works fine.
I want to modify it to consider rows 3 onward down. It means even if rows 1 & 2 are populated and row 3 onwards down are empty, then it will hide it.
I tried but it is not working .....
I am trying to hide empty columns, excluding the header, from data that has been auto filtered. I can accomplish this when the data is not filtered by hiding columns that are empty below the header.
My question is: How do I get the "For each Col in Activesheet..." loop to only apply to the filtered values and not those that are hidden.
I've created an excel workbook to automatically create a report for my work. All you have to do is enter the data into the "DATA" worksheet. Easy. Only problem is that someone can easily ruin it if they try to run it when the "DATA" sheet is empty. I figure that if I can get two columns hide when it's empty and that would solve my problem. I've tried several VBA codes, but they don't work. Also, everything except the "DATA" sheet is protected to prevent accidently changes. This is the latest code I've tried:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "DATA!$P$5" And Target.Value = 0 Then
ActiveSheet.Unprotect ("password")
[Code].....
I am trying to write a code that would hide when certain cells in the worksheet are empty. Also the sheet name should start with a -.
This is the code i have so far. The thing is that the sheet will always hide. The criteria on the cells doesnt work.
Sub Hide_all_filled_Templates()
Dim ws As Worksheet
Application.DisplayAlerts = False
For Each ws In Worksheets
If Left(ws.Name, 1) = "-" Then
If Not Range("I9").Value = "" Or Range("K9").Value = "" Or Range("M9").Value = "" Or Range("O9").Value = "" Then ws.Visible = False
End If
Next
Application.DisplayAlerts = True
End Sub
The code now hides all shees starting with "-". It does not take the cell criteria into account. Why?
Other point is that these cell references are just a few of what it should really be. How do I make this easier for myself to write the code. Point is that these cells come in row 9 (like the example) then in row 11 then in row 15, 17, 21,23, etc. Also the columns jump with uneven steps.
I have a long range of cells (U3:AX3), all of which are empty save one. Is there a way to search through the range of cells, and return the contents of the one cell that contains text?
I would do this with a series of nested IF statements if there weren't more than 30 of them!
I need to select all yellow tabs (color code 6) in a workbook with over 70 tabs and hide all empty rows within A1:I36 on each of these yellow tabs. the position of the tabs needs to be unchanged (sorting by tab color not allowed). I got this code from another excel forum but somehow it only works when i select one yellow tab and run it and the code only works on the one yellow tab i selected. can fix this code so that it can loop through all tabs (yellow and non color) and do what i mentioned above for each yellow tab?
Sub HideMT()
Dim Ws As Worksheet
Dim wsColor As Long
[Code].....
My company has a canned template for some of the work we do and to avoid wasting too much paper I wanted to insert some extra code into an already programmed macro button (which sets the page breaks) to hide forms (both as individual worksheets and rows within separate worksheets) if the field that ought to auto-fill them is left empty.
View 3 Replies View RelatedI am getting values for my excel sheet from another department excel sheet . everything works fine. If there is no values in the rows in the Department sheet, then i need to hide the rows in my sheet. How to code this in VBA. When they add values to the rows then i should make the rows visble here. Kindy give me a sample of vba code to this or suggest me to solve.
View 9 Replies View RelatedI would like to rows based on multiple column conditions criteria. ie., if the columns N, O, P values are "", then hide the particular row. The logic given in the website here, i tried But, it is not 100% working. It works for a few rows at the start of the database & it works for the rows at the end of the database. In between, for a few rows, even if the column values are "" it does not hide those rows.
View 2 Replies View RelatedI am trying to hide columns in a range, "P8:ET1087" but it isn't working. After I autofilter a value, every row will be hidden except for the rows where the value is found. This is always 6 rows, won't be more or less.
The 6 cells in every column are the same and contain from 1 to 6:
Text
Text
Date
Number
Text
Date
What I am trying to do is to hide the column if all cells in that column are blank/empty after it's autofiltered. That for the 135 columns, from P to ET.
I was messing around with the following code:
[Code] .....
But it doesn't seem to work.
I am trying to hide columns within a named range, where the range corresponds with the values section of a pivot table.
My code hides an unexpected set of columns. It seems to be affecting a different range, depending on the number of columns in the pivot table, which is not part of the named range, as if there was some kind of offset.
Sub hideAll()
With ActiveSheet.Range("wholeyear")
.Range(.Columns(1), .Columns(12)).Hidden = True
End With
End Sub
I am looking for something that will first delete all empty columns up until it runs into data, then delete all rows that are blank in Column A until it runs into data.
In other words, I recieve different spreadsheets that start their data in different locations and I would like to have them always start in cell A1.
I have a spreadsheet with a number of sheets two of which contain tables with many columns with a date heading, I would like a means for the user to select a range of dates and for the spreadsheet to automatically hide any columns that don't fall within this range.
View 3 Replies View RelatedI am trying to lock the unused cells in 32, 2 column by 7 row named ranges, based on whether or not two cells, above each range are equal or less than each other. In other words while one of the cells is less than or equal to the second cell all cells in the range below should be unlocked, as soon as that condition is no longer true the blank cells need to be locked.
I am trying to use this in the Workbook_Sheetcalculate so that the macro will run automatically.
I created a macro that analyzes some datasets and according to different parameters it puts an X at the side of every cell that goes out of parameters. These Xs are all in columns named the same way for it to be easier to find. What I want to do is to write some macro that will hide every row where the data did not go out of parameters to be able to easily see where it did. In the following example it would need to hide the second row since there are no Xs in that row. One of the problems I'm having is that the amount of columns and rows is variable.
Data
Data
Functional Upset
Data
Data
Functional Upset
#
#
X
#
#
[Code] .......
Below is the piece of code that I created to try to do this (G has the value for the amount of rows). I think it is working but it is either taking too long since it has to sometimes go through over 20k lines as much times as it needs to to cover all the rows that contain Xs or its getting stuck for some reason.
Code:
Worksheets(2).Range("I3:I" & G).EntireRow.Hidden = True
K = 0
Do Until Worksheets(2).Range("I1").Offset(0, K) = ""
If Worksheets(2).Range("I1").Offset(0, K) = "Functional Upset" Then
[Code] ......
I need some VBA code to hide columns if they are outside of a specified date range.
- the worksheet i need to run this VBA on is named 'Summary'
- Columns A to G need to remain un-hidden at all times
- from H17 to ZZ17 i have every month of the relevant years listed (all there chronologically)
- D3 holds the 'Date From' variable
- D4 holds the 'Date To' variable
macro below that will only hide columns if all the rows (e.g. row 8 to 18) have no value?
Code:
Private Sub Worksheet_Change(ByVal Target As Range)
If Intersect(Target, Range("U18:AB18")) Is Nothing Then Exit Sub
If Target.Cells.Count > 1 Then Exit Sub
[Code].....
Is it possible to hide just a portion of a column? I want to hide just E85:E98, for example. Not all of column E.
View 9 Replies View Related=IF( SUM(S7:Y7)="","",SUM(S7:Y7)) - Produces 0
=IF(SUM(S7:Y7)="0","",SUM(S7:Y7)) - Still Produces 0
What I am trying to do is if ALL cells S7 thru Y7 are blank then be blank otherwise sum them. I've used this on a single cell, but not to test a range of cells. What I use for a single cell would be like this...
=IF(S7="","",S7) - Will not produce 0 if the cell is blank, just leaves it blank.
I need code in VBA that look for empty cells at a range and return msgbox with the empty cell
View 5 Replies View RelatedI have an if statement as follows:
If IsEmpty(Range(Cells(iCurrentRow, iFirstDataColumn), Cells(iCurrentRow, iTotalCol)))
Then
i did a select to make sure it was selecting the whole range I want and it works fine:
Range(Cells(iCurrentRow, iFirstDataColumn), Cells(iCurrentRow, iTotalCol)).Select
Inside my range I can have cells with 0s in them and cells with nothing in them. What I would like my if statement to do is return true ONLY when ALL cells have nothing in them. At the moment, even if I have 0's in some cells, it's returning false.
way to automatically hide a row or column based on a specified cell.
Or even something general like: Hide all rows with cells evaluating to #n/a.
I am trying to populate the 2 tables from excel to word. I will be getting the excel file with tables in various sheets. One sheet consist of 2 tables that will be inserted to one word document. So if there are 2 sheets then I will have the tables inserted in the 2 word document. In the excel sheet I have attached, there are 2 sheets with tables in each of them. I have written the code to copy and paste the table to word doc from (general) range A1:G4 (Table 1) and A9:H18 (Table 2) that has empty rows and columns selected. But there are empty rows and columns inserted since the table range is not same sheetwise. I would like get the empty rows and columns deleted in the word table.
Find the attached sample excel sheet and the word documents.
DeleteEmptyRows(Sample).xlsx
Sheet1.doc
Sheet2.doc
im having a little trouble writing a macro to :
check if a7:t7 is empty, if so delete a6:t7 and change cell colour of a6:t7 to 'no fill'
trying to add cells together that contain time (hours and minutes). The cell containing the total formula shows the #VALUE! result when and only when one or more cells being added do not have a value in them.
The times have been entered as actual times of the day, formatted for AM/PM.
A simple adding formula works fine, but all cells must have a value in them to obtain a valid result.
I attach a sample of the sheet.
The application reads in a file, whcih can have various formats. To check which format it's in, I plan to look for certain empty fields/ cells. I can successfully detect a group of empty cells by explicitly testing each one, but when I put them all in a range and test that, the check fails. So far I've reduced the problem to the following example code.
Sub check_clear()
Range("g1:g8").clear
If IsEmpty(Range("a1")) Then
Range("g2") = "A1 empty"
End If
If IsEmpty(Range("b1")) Then
Range("g3") = "B1 empty"
End If
If IsEmpty(Range("c1")) Then
Range("g4") = "C1 empty"
End If
If IsEmpty(Range("d1")) Then
Range("g5") = "D1 empty"
End If..............
The result is that each individual cell check results in the relevant "XX empty" message. However, the test that the range of multiple cells is empty never produces a result. I'd really like to understand the underlying reason - as well as find out how to perform an isEmpty test on a range. I'm looking more for guidance and insight than a canned solution
I am creating a form in excel and need to hide a selection of cells, not an entire column, or an entire row, but the cell range K43:K48. I want these cells to be hidden at all times unless any one of H44:H48 has the value "Other" inputted.
If Other is selected I want range K43:K48 to become unhidden. Is there any way to do this?
I have tried to use Conditional Formatting to do this, but only being able to use 3 conditions makes it harder to do when I have a range of 5 cells that could display "Other:"
I require code to identify the last row in column 'A' that contains data, and then to select every row up to that one, and each column up to 'H'. My data begins on row 3, and the rows with data varies from row 7 through 120. The columns with data is constant so there is no need to test in that direction.
View 2 Replies View Related
