I want to filter and then hide the filtered output in a range of data. But after I hiding, when I remove the filter, everything is there again. I don't know how to hide it even filter is removed.
View 7 RepliesI have the following Macro that hides rows that contain old dates (in column B) in a range:
View 2 Replies View RelatedHow do I know how many rows are selected by rngToFilter? I need to add in a conditional statement if its 0.
For Each rngCell In rngUnique
sheetName = rngCell.Value
ThisWorkbook.Worksheets(sheetName).Delete
rngToFilter. AutoFilter Field:=4, Criteria1:=rngCell.Value
rngToFilter.AutoFilter Field:=28, Criteria1:="="
Set rngFiltered = rngToFilter.SpecialCells(xlCellTypeVisible)
Worksheets.Add
rngFiltered.Copy ActiveSheet. Range("A1")
From a combobox selection i filter a table for all entries containing the selected ID (from the combobox).
I first wanted to use selected columns from the resultant display (the filtered table) to populate another combobox so the user could drill down to the final selection that way, but seeing the mess i was getting involved in (I couldn't assign a range to the listfillrange of the other combobox) i think it might be best to settle for simply copying the visible cells to a new table on the selection page (the full database is on one sheet separate from the selection comboboxes and related controls), where the user can simply see the information needed on whatever line item they want - the number of filtered entries rarely exceeds five. What i can't understand is when i query the number of rows in the immediate window from the code snip below, it always comes back as "1", whether i do so on the full range or special visible cells.
[Code] .......
To load another combobox i tired
[Code] ...........
I really would like to be able to do so for further refining, if not feasible, can work with just a display table.
Querying the reultant rows i simply tried:
[Code] ...........
and
[Code] ....
In both cases, though the filtered table had 5 records displayed, the count was... 1.
1) Can the visible cells resultant table be fed into a combobox relatively easily and if so, how?
2) With the count of rows, what am i doing wrong?
I have a range that has been formatted as a table. Once I've applied a filter, if I try to select all of the rows, and delete the visible rows the option is greyed out.
Is there no way, short of vba, that I can just simply delete the visible rows?
i'm using this source to add labels to data points in charts:
Sub AttachLabelsToPoints()
'Dimension variables.
Dim Counter As Integer, ChartName As String, xVals As String
' Disable screen updating while the subroutine is run.
Application. ScreenUpdating = False
'Store the formula for the first series in "xVals".
xVals = ActiveChart.SeriesCollection(1).Formula
the code is from ms and works. (for some reason they also declare variable 'chartname' although it's never used, anyway). the full thing here: [url]
i actually have my source data filterable. so depending on the filters chosen, the chart updates itself. so it removes data points in the chart as more filters are used.
the problem is that the labels ignore the filters. the code above just goes down the column to grab the labels grabbing values in order, even if they have been filtered out.
a cumbersome workaround would be to copy the filtered data to another range and use that for the labels. this is neither optimal because i have lots of data or elegant.
I have 5 pivot tables on 5sheets, all looking at the same source data in sheet 6
On the source data there is a filter on the headers, if you change the filter, is it possible for all 5 pivot tables to update according to the filter?
My starting point is the below, but there probably is a better way but i would want the sourcedata to equal visible rows on the source data sheet headers run A:K and up to row 10000 .
Can't seem to find a solution searching through various forums searches. I would like to hide all blank rows within a Named Range : Range1 (A1:E8).............
View 4 Replies View RelatedI have this code (compliments of VBA Noob) which hides all blank rows within a range ("Range1") P16:V650. It works great in a new worksheet with little amount data, however within my heavy worksheet, it takes over a minute to compile.
View 2 Replies View RelatedWith my searches i manage to make this working code:
Code:
Sub Hide_Rows()
Application.ScreenUpdating = False
Dim Rng, os1, os2, os3, os4, os5, os6, os7, os8, os9, os10, os11 As Range
Set os1 = Range("B11:E63")
Set os2 = Range("B64:E116")
Set os3 = Range("B117:E169")
Set os4 = Range("B170:E222")
[Code]...
In any range (os1 to os11) all empty rows are hidden... ok! But, every range have 2 first rows as headers that i want to hide (in case of no data below) before print!
I'm trying to hide all rows from row 3 to a variable row. I've struggled to simply select the rows that I want to hide. I have managed to select a range (containing the rows that I want to hide). I now need to select the rows contained in the range currently selected and then hide them. My code is as follows:
Sheets("Program").Activate
Activesheet.Range("B3").Select
Sheets("Program").Range("B3", ActiveCell.Offset(LastProgramRow - 10, 0)).Select
Selection.Row.EntireRow.Hidden = True
The last line of code fails. I have tried modifying it to variations of:
Sheets("Program").Row (3), ActiveCell.Offset(LastProgramRow - 10).Select
but this also fails. How can I change this code so that only the row is selected and not a column?
I have a graph in Excel containing the 12 months in column 'A' and data associated with each month in column 'B'. I want to hide rows containing months which have yet to arrive (eg: if we are in August, I want to hide the rows containing September:December). However, I want to change the range of rows that I hide each month (so that when we get to September, I only hide rows containing October:December). My attempts at writing a macro to perform this automatically have failed? This is the script I have written:
fyi - RowStart is the row number associated with January, RowEnd is the row number associated with December and RowNext updates each month and is the row number associated with the next calendar month.
Option Explicit
Dim RowStart As Integer
Dim RowEnd As Integer
Dim RowNext As Integer
Sub Hiderows()
RowStart = sheets("month").Range ("A1")
RowEnd= sheets("month").Range ("A2")
RowNext = sheets("month").Range ("A3")
Sheets("month").Select
Rows("RowStart:RowEnd").Select
Selection.EntireRow.Hidden=False
Rows("RowNext:RowEnd").Select
Selection.EntireRow.Hidden=True
End Sub
How do you select certain ranges in the same column to filter? The ranges I need are "c36:c50" & "c54:c68" & "c72:c87" & "c91:c155" & "c158:c172" & "c176:c202" all filtering for blanks. I can not filter from c36:c202 because there are blanks in the missing rows and they have to stay.
View 7 Replies View RelatedI have the following macro to autohide some rows with no data, however its remove rows starting from column A.
[Code] .....
How do i fix this to only hide the rows in the range (H4:V50)?
I've been trying to put together some code to hide a range of rows on one page based on cell values on a different page. So basically Sheet1 cell A1 value is 10, A2 value is 20. When macro is run via button rows on Sheet2 from 10-20 would be hidden. The issue is the values in the cells on Sheet1 will vary. I thought something like the following would work but it doesn't.
[Code] ....
I need to select all yellow tabs (color code 6) in a workbook with over 70 tabs and hide all empty rows within A1:I36 on each of these yellow tabs. the position of the tabs needs to be unchanged (sorting by tab color not allowed). I got this code from another excel forum but somehow it only works when i select one yellow tab and run it and the code only works on the one yellow tab i selected. can fix this code so that it can loop through all tabs (yellow and non color) and do what i mentioned above for each yellow tab?
Sub HideMT()
Dim Ws As Worksheet
Dim wsColor As Long
[Code].....
In one spreadsheet, I want to have a command button that will hide all rows where the date column (column A) shows a date older than one week from today. When this button is clicked again, all rows will unhide again. Preferably the Command button title would change to reflect whether it is on the hide or show cycle (for example "Click to Hide all older than one week" and then "Click to Show all events") .
View 9 Replies View RelatedIs there a way in 2007 to automatically hide rows that don't contain data? (I don't want to delete them, just hide them).
View 3 Replies View RelatedI think this is fairly straight forward but my limited VBA skills have me going round in circles. I would like to have a button that hides and unhides rows where Column L has blank values but only from row 80 to 200 only. I would also like the button text to change from "Hide rows" to "Unhide Rows".
From Row 80 to 100 hide rows where there is no value in column LButton should be clickable to hide rows and then clickable to unhidebutton text changes.
How do I delete filtered rows without deleting the hidden rows in excel 2010?
View 8 Replies View RelatedI have two linked workbooks, one containing a large data table, and the other containing individual worksheets that extract the data from the large table via HLOOKUP equations in each cell.
Is there a way to have Excel hide the row of a worksheet if the resulting HLOOKUP result in the cell in that row is empty? Also, if there is data in the cell, can I get Excel to automatically adjust the row height based in the incoming data and not on the HLOOKUP equation?
If range B10:O21 has a value that is listed in column A28:A168 then hide the row where it is.
Example if I have in B10 the number: 2151
I want the row in column A that has 2151 to hide.
How can I write code to do this?
Would this be with worksheet change?
I have a spread sheet in which some rows are grouped.
So I can see the + (or -) buttons on the side, and the 1 and 2 buttons on the top, to hide or show the separate grouped rows.
Now, depending on the value of a certain cell, I either want to show or hide the grouped rows.
So actually I want to control the +/- and 1/2 buttons indirectly.
Is this possible? Or should I do this by hiding rows instead of grouping them?
I have to show a report with 3 columns= Physician names, Section and number of procedures. The problem is that physician name repeat several time according the section they order and I need to show in the first column each Physician name just one, see attached picture.
I did try to use conditional formatting and advance data formatting but not working properly for me. I was able to use =A2=A1 conditional formatting and hide duplicates physician names but shows only the last row of the duplicate names no the first one.
I have a spreadsheet that allows room for 35 students per period, but instead of having the teacher manually go in and delete the extra data and hide the rows, I want to create a macro that will do so.
In cell B4 the teacher will enter how many students are in their first period class. (cell C4 for second period, cell D4 for third etc...) I want the entering of the number to automatically hide the superfluous rows and delete the data in the second column for those rows. I don't want the rows to be completely deleted because another year they may have more students and need those rows back.
I have attached one of the workbooks that I need to put this macro into. I have created room for 35 students in a given period. So if they have 23 students entered into B4 (period one) I would need rows 30-41 to be hidden, and I would need the formulas in B30:B41, E30:E41, H30:H31, K30:K31 etc....deleted.
Basically the point of the formulas is the teacher will enter the total points possible on that given assignment in cell B6, E6, H6 etc....and it autofills that score down, so the teacher only enters those that missed points instead of entering in the missed ones and the 100 percent ones.
I would need those formulas to be deleted because if the assignment was out of 10 then cell B30-B41 will give students a 10, and then the class average will be computing those scores,but those students don't exist.
But if I can't get the macro to auto delete the formulas, I will just not have those formulas in there, and the teacher can enter all scores.
I have a data validation cell that has 5 items to be selected, lets say A-E.
I would like a macro that checks and does the following:
A or B selected, hide row 25-34, rows 45- 53
C or D selected, hide row 24-44
E selected, hide rows 34-53
In each case, the macro should check and unhide all rows between 25-53 before doing the above
I am developing a spreadsheet that, once all the code is run has numerous sheets added. On these sheets I have a significant number of rows that contain no data and could be hidden (I dont want to remove them, because later I need to re- import all these rows back to my master sheet). I tried code I found in the forum to hide a row if it is empty but this doesnt work as some of the cells contain formulaes referencing back to another sheet that is hidden.
I am trying, and failing, to write code to hide a row that contains no actual data, but still has formulas in some of the cells.
Is it possible to copy data that has been filtered on one tab into filtered data on another tab? I've attached an example, i'm trying to copy the values from column C on the 'From' tab to column D on the 'To' tab. I think the data is always going to be an exact fit in terms of the number of cells copied from and to.
View 1 Replies View RelatedI have Cell C63 in Worksheet 1 which is set up to say either "YES" or "NO" depending on whether a value on a different worksheet exceeds a value in an adjacent cell or not (also on that worksheet). The formula I am using is simply:
=IF('4. NORMALITY ASSESSMENT'!AC55>'4. NORMALITY ASSESSMENT'!AA55,"YES", "NO")
Essentially I don't want anything displayed if there are no data in the range C4:C54 on Worksheet 1. I thought I need a nested IF function but I couldn't get this to work.
I have a macro in which i can enter the rows i want to hide.
If i want to hide "position 32" i have to enter the number 8 of the row. This works fine. But now if i want to hide the "position 32" from Sheet1 it also should hide the rows 4-8 from Sheet2 [Data with 32].
Or if i hide "position 34" in Sheet1 [row 10] it also should hide the rows 14-18 in Sheet2.