I want to record a macro (so i can asign it to a button) that saves the workbook to a specific folder. I want the workbook to be saved under a name from a cell in the workbook.
the code below saves it to the correct folder but does not save it under the name typed in cell "I5" (it saves it under "false" now)
ActiveWorkbook.SaveAs Filename = "Z:ESTIMATES 2.xls" & Range("I5").Value & ".XLS"
End Sub
I have two workbooks open. I need to "Save As" and close workbook 2 with a file name from a cell in Workbook 1. The macro is running from workbook 1.
I'm guessing a change in the last line. I don't know what Dim means either.
Dim FName As String
Dim FPath As String
FPath = "G:"
FName = Sheets("sheet 1").Range("A1").Text
ThisWorkbook.SaveAs Filename:=FPath & "" & FName
the following scenario.
I am using the following code to save a workbook as a macro enable workbook on the selected path as today's date. But it is being saved as a macro free workbook.
Below is the code in module:
Sub save_file()
Dim tDate As String
Dim FileSaveName As String
Dim fPath As String
tDate = VBA.Format(DateSerial(Year(Date), Month(Date), Day(Date)), "dd-mm-yyyy")
'FileSaveName = Application.GetSaveAsFilename(InitialFileName:=tDate, filefilter:="Excel Files(*.xlsm),*.xlsm", Title:="Please save the file")
[Code]...
I want is a Macro that will save the file as .csv, with the same filename and location as the original (just in csv format). A hotkey would be quite handy for this. I tried using the macro recorder and fiddled around with the code a bit but my programming knowledge is quite limited and I ended up with something that doesn't quite work as i'd like. I'm sure this would only take a few seconds to code for an experienced user, which is why I post here. I would post my attempt at doing it myself but i'm on a computer that doesn't have excel at the moment.
View 3 Replies View RelatedI have got a master workbook and I have written macro to copy and paste data on another workbook. write a macro to save the new workbook to a file path with a file name where both file name and path are stored in master workbook sheet...
View 5 Replies View RelatedI need to have a workbook (all of them in a folder, ideally) refresh in the middle of the night. The file is large so the refresh takes a full minute. I know I can't auto refresh a closed workbook (pretty sure anyway), and I can't leave the workbook open for various reasons.
So I'm thinking I could have a macro in an open excel (it kicks off on open) that will open a particular workbook elsewhere (the one I need refreshed), open it, refresh it and close/save it. Ideally it would do this for the entire group of workbooks in the folder but I'd be happy to start with just one. I would like to set it to occur every twelve hours (so at midnight, say, this would occur - I would just have to leave the workbook with the macro in it open on a computer so that it runs and completes this task every night).
I'm looking for a macro that can do the following:
Contact
First Name
BD
Case
XXXXXXX
Aaron
A
XXXXXXXXXXXXXXX
XXXXXXXX
Abigail
C
XXXXXXXXXXXXXXX
XXXXXXXXXXXXXX
Accounts
D
XXXXXXXXXXXXXXX
XXXXXXXXXXXXXX
Adam
C
XXXXXXXXXXXXXXX
Filter by BD 'C'
Copy all rows containing 'C' to new workbook.
Save new Workbook as 'Mailing C.xls' and close to specific flolder.
I have a macro in a workbook that starts with one sheet (called Home Page), the macro opens other workbooks and copies sheets to add to the original workbook. When the macro has finished, I would like for a new macro to include all sheets into one PDF file. My problem the finished workbook will have a different number of sheets in it every time.
View 5 Replies View RelatedI need to save a single sheet to a file (in a workbook of many sheets). I can't use the copy command and then save the new workbook because it truncates the longer info in some cells.
I need to be able to save a workbook by running a marco and it save the file automatically by pulling what ever the value of cell A1 is.
Ex: I want to run the macro and it save my excel workbook in C:Documents as (Value of Cell A1) What code would you put into Visual Basic.
I have 5 Excel files. The first one is Main, and the other 4 are subfiles, namely A1, A2, A3 & A4. I have a need to open Main, then click a button to start a Macro (in Main) which will do the following, sequentially:
1. open A1
2. run a Macro in A1
3. close and save A1.
4. open A2
5. run a Macro in A2
...
12 close and save A4.
The files A1..A4 are a file server and being shared. If they're being used by another user, it cannot be saved - so I would have to skip it and continue with the next A. It would be great if start Excel, open Main, and run the Macro in Main fully automatically.
I am moving some sheets into a new workbook and from the new workbook I want to prompt the user to save the workbook where they see fit. For some reason I cannot seem to save the new workbook only the old with the below code.
Sub Moving
Dim wb As Workbook
Set wb = ThisWorkbook
Sheets( Array("Hk", "Li", _
"SAM")).Select
Sheets("SAM").Activate
Sheets(Array("Hk", "Li", _
"SAM")).Copy
If wb.Saved = False Then
Select Case MsgBox("Do you want to save your changes?", vbYesNo Or vbExclamation Or vbDefaultButton1, "J & R Solutions")
Case vbYes
wb.Close True
Case vbNo
wb.Close False
End Select
End If
Working with a macro enabled workbook that has many sheets what would be a good code that would save Sheet1 into a new MACRO enabled workbook so that the 'Buttons' (which are linked to macros) on this specific sheet will be the only macros that will be copied to the new workbook as opposed to the rest of the macros that are found in different sheets?
Here is what I g=have:
[Code] ......
I'm trying to record a macro that calls up the saveas dialogue and uses a filename from a cell (it's the w/c date). I can start recording the macro, open the dialogue box and copy the contents of the cell but i can't get it to paste as the filname.
What I'm trying to achieve is to allow users of a muli-sheet workbook to be able to click on a 'save' button on any sheet and have the workbook save with a filename which includes the current week commencing date. This way all the weeks changes will be in just one file and from the following monday a new file will be started the the old one left alone as an archive.
I have code to create a new workbook, and when I try to rename it I get "Compile error: Can't assign to read-only property."
Dim objXlApp As Object
Dim wkb As Workbook
Dim wks As Worksheet
Set objXlApp = CreateObject("Excel.Application")
' Create a workbook
Set wkb = objXlApp.Workbooks.Add
' Delete all worksheets bar the first one.
For Each wks In wkb.Worksheets
If Not wks.Index = 1 Then
wks.Delete
End If
Next wks
'Create some worksheets and names
With wkb
.Worksheets(1).Name = "myWorksheet1"
.Worksheets.Add.Name = "myWorksheet2"
.Worksheets.Add.Name = "myWorksheet3"
.Worksheets.Add.Name = "myWorksheet4"
End With...................................
have seen macros that create a seperate sheet & save by tab number etc, & wonder if its possible to save each sheet in a workbook as the value defined in each sheets cell A2. is there a vb macro available to do that ? if so where ?
View 9 Replies View RelatedRead “My Documents” Path And Use Result
Problem:
Note:
Typical user OS will be Windows XP Pro / Win 2K
Excel version : 97 / 2002 / 2003
1. Corporate network security settings will only allow directory/subdirectory creation in the “My Documents” section of customers individual computers.
2. Per customer request, VBA application needs to save extracted files for future use.
3. I can specify an initial “My Documents” subdirectory be made and the VBA application file be loaded/copied into that location – i.e. – “My DocumentsCat”.
4. When VBA application is opened from that specified directory, (first time), the application needs to make an additional subdirectory tree to save future files. I can read the opened from location via VBA with the following:
Dim filepath As String
filepath = ThisWorkbook.Path
As an example – this code would produce a string definition of “filepath” – such as the following:............................
I am using 2007. This may be something simple but I can't seem to find a solution to this, I have an excel macro enabled workbook which produces a daily report the final task is to save and send an email but I need the file to save as an xls rather than xlsx as some of the recipients are unable to open the file here is the code used for the tasks in the
workbook:Sub Step1_Refresh()
'
' Step1_Refresh Macro
'
'
ActiveWorkbook.RefreshAll
End Sub
Sub step2_save_close()
[Code] ........
I am using 2007, I have an excel macro enabled workbook which produces a daily report the final task is to save and send an email but I need the file to save as an xls rather than xlsx as some of the recipients are unable to open the file.
Here is the code used for the tasks in the:
workbook:Sub Step1_Refresh()
'
' Step1_Refresh Macro
'
'
[Code]....
I have a macro that opens all workbooks from one directory and runs a macro for each workbook to clean up the data. I cannot figure out how to take all those open workbooks and save them to another directory and close the workbook. Also, I do not want the macro workbook (xlsm) to save. I only want it to close. I am working in 2007 Excel.
View 8 Replies View RelatedCode to copy the sheet that get selected by if-then-elseif statement and paste in a new workbook, save the workbook as temp, email it and delete it,
sub sending_mail
Dim OutApp As Object
Dim OutMail As Object
Dim rng As Range
Dim DataWB As Worksheet
[Code] ......
I have an expense report, which was originally done in Excel 2003. It still prompts users to open as read only however if they select no, they are not prompted for the password, and it has allowed them to save, so when the next person opens it, they have the previous person's report instead of the clean workbook. I have tried everything to put a password onto it. I know this is really basic stuff, but maybe I am missing a step? I want the end user to be able to make all the changes they want in read only mode and then do a save as, but if the select No when prompted "Open as Read-only?" they should have to put a password in.
View 4 Replies View RelatedI have figured out how to save the workbook using a variable to saveas but I would like to create a new folder to place the new workbook into. I have tried a few things a am not having any luck. I recorded a macro and the code it produced is as follows.
View 6 Replies View RelatedI have a update/Save button on a spreadsheet. So when clicked it updates another sheet and saves the workbook.
how can i have it run the macro when they don't click the button and do
File -> Save.
I have been trying to edit a code which previously saved a copy in a new workbook to a specific folder/path. (Additionally it copies and clears some figures, but this is working as it should.)
However I would like the copy to be saved at the same location as the original workbook, regardless of the path the original workbook is saved.
I.e if I need to move the workbook containing the code to a new folder/location, when using the macro, the new copy should be stored in the same folder/location as the original one.
For now it is only saving the copy into "My Documents"
Code:
Sub Macro1()
'
' Macro1 Macro
' Macro recorded 16-02-2009 by ceng
'
Sheets("Bunker ROB").Select
Sheets("Bunker ROB").Copy
ActiveWorkbook.SaveAs Filename:= _
ActiveWorkbook.Path & Range("D3"), _
FileFormat:=xlOpenXMLWorkbookMacroEnabled, CreateBackup:=False
[Code] ........
I'm trying to find a way to save a single sheet of an excel workbook and in the same process delete all vba code and shapes from the new single sheet workbook. I was looking around and found this code which does save only the single sheet to a new one sheet workbook but doesn't delete the vba and shape that I have used to assign macros to in the original.
Code:
Sub SaveSheetAsNewBook()
Dim wb As Workbook
Dim InitFileName As String
Dim fileSaveName As String
Dim wshape As Shape
InitFileName = ThisWorkbook.Path & Format(Date, "mm.dd.yy")
[code]....
I'm trying to make a macro check if a file has been saved (ever). If so I want the macro to do a regular save (with already esatablished filename and location) before it proceeds with the rest of the macro. If the file hasnt been saved (if it runs from a new workbook) then I want it to pop up the save.as dialog, so that the user can choose the name and location of the file before the macro continues .
The macro itself is saved in personal.xlsx.
I'm trying to have a macro that opens the save as window, places the name in cell f5 and then allows you to save the workbook with cell f5 as the filename. I have managed to get the save as window to come up and the cell f5 as the name, but when I press save is doesn't. Here is what I have (also, is there a way to direct this to a specific folder).
View 4 Replies View Relatedis it possible to work on a workbook lets call it 123
once macro button is pressed it opens workbook abc
then saves it as what ever is in cell a1 to a directory?
I have a spreadsheet that data gets exported to from a software program. There is information such as customer name, part number, inquiry number, etc that I'd like to use to develop a log of all my estimates I create for parts. I'd like excel to take the cells I select and insert them into certain cells in the other workbook and automatically save that workbook. This will create a log of all my estimates where I can then link the full estimate to the log. The information will have to go in the next available row. Is there any way I can accomplish this without having to open the other workbook and save the work book each time?
View 1 Replies View Related