Macro To Treat All Cells That Contain Only The Formula
Mar 19, 2002
My macro sorts fine and includes everything I want but I have extra cells for adding new data that contain a formula. When my macro sorts it places all empty cells at the top of the list then the data. When I delete the hidden formulas the sort places the empty cells at the bottom of my list like I want. Is there any way to code my macro to treat all cells that contain only the formula(not the data) as empty? The only thing the formula is, is a reference to another sheet ie. ='Sheet6'!$A$6.
I want to check if numbers are smaller than a specific number, but my problem is that the numbers I want to check is formatted as text. Is it possible to rewrite this formula so it works:
i'm looking for a formula that gives the greatest number of a range problem is that there are positive and negative numbers in the range but I only want to look at the value (+/- signs are not important)
The problem i have is with the sum offset function. The formula i use is to sum up the totals for each page of an accounts document. At the top of each page there is a column with " £ p " in it and i use that as the basis of the formula. This formula is entered in the bottom of every page to calculate the total for each page.
This works all the time but when text is entered into column F (the column i'm adding up) it messes up with the formula. the formula will instead find the £ p but for a page 2/3 pages before the one i'm calculating on. This formula only faults when text is entered. Another thing; this excel sheet i'm working on is an output from a different computer program. it is outputted as csv file i think.
Like i said the formula works a treat except when text is entered. The obvious way around this not to enter text but that is not an ideal option. I cannot think of another way of calculating the total for each page although i'm sure another exists.
I tried formatting the numbers to "text" and still got undesirable results.
Below is the data I have. The numbers on the left are part numbers and the numbers on the right are the times they're used. I would like the part numbers to be on the x axis and the times they're used (73, 42, etc.) to be on the y axis. Pretty simple right? Change the part numbers to text, highlight both columns and insert a column chart, piece of cake.
Instead what is actually showing is a series of "1 - 9" on the x axis and a range from 0 - 50,000 on the y axis which it thinks the part numbers are even though I have them formatted as text.
It basically says "If column A is empty,then = 24:00, otherwise = column A".
It works fine and displays as 24:00 in the proper cells, but if you try to add all the 24:00 together it doesn't work. I guess the simple question is, how do I hard code a proper time value from an If Statement.
I have one list in one sheet that is source for the userform and combobox used on another sheet. With userform I make a choice and data is entered in one cell. But is it possible to compare the choice that I make in combobox with the list on the first sheet and then make a simple link between these two cells, so that cell in the second sheet is always showing what is in the cell on the first sheet. Reason for this is that items on the list on the first sheet sometimes change and I need to update the second sheet automatically.
Private Sub cmdOK_Click()
With Sheets("Presentation").Range("V18:V32") Set c = . Find(cbochange.Value, LookIn:=xlValues) If Not c Is Nothing Then firstAddress = c.Address Do ActiveCell.Offset(0, 2).Formula = firstAddress Set c = .FindNext(c) Loop While Not c Is Nothing And c.Address <> firstAddress End If End With Unload Me End Sub
i m trying to set up a macro to convert a range of user-highlighted(selected) cells to 3 significant figures: for example, convert 0.135564 to 0.136
the equation i found elsewhere online: ROUND(xx,3-(1+INT(LOG10(ABS(xx))))). but i can't quite figue out how to apply the equation to a selected range of cells via a macro.
I have a spread sheet with large number of data, problem is all are in various currency so rather than typing =#####.##/a1 in every cell to get the GBP amount (a1 where my exchange rate is linked) I thought if there is macro can do this job for rme.
So what i need is macro which once run enter the formula after the numbers already in the cell in selected or given range.
=AVERAGEIFS(A1:A1000;A1:C1000;"0";A1:A1000;"A1001") into range of cells so the changes relatively to its position e.g. in column B it will look like this
=AVERAGEIFS(B1:B1000;B1:C1000;"0";B1:B1000;"B1001") The macro I recorded will paste formula where I need, but all references remain the same. What should I do to make them change?
This worksheet has around 40,000 records, and I need to create a Macro that will ask the user for a date, and when the user enters a date the macro goes through column A and finds all of the matching dates and then replaces the numbers (along with the formulas) in the corresponding Add Returns cells (column E) with 0's.
I have only been able to create an inputbox, but I am completely lost regarding the criteria due to being very new to VBA.
Sub ClearData() Dim EnterDate As Date Dim msg As String
I have a spreadsheet with a number of different formulae on it. I have a macro which I want to extract which cells are referenced in the formula in the active cell and then branch based on the which cell is referenced.
Is there a way to find the referenced cells without parsing the formula string?
I'm trying to create a macro to insert a formula into a specific cell. The formula is meant to check if a cell has text, and then if it does, search for the text on another page.
I had a go at the code, but keep getting Runtime error 13.
I'm using Excel 2010
Code:
Sub new_entry() ' ' NEW_ENTRY Macro Dim rowNo As Integer
I have a spreadsheet with data populated down column B. This size will vary from day to day so is there a macro I can run that will populate Column C with a formula based on their being data in the adjacent cell.
I received assistance from NBVC for combining data from two cells. Post http://www.excelforum.com/showthread.php?p=2135144. I need to convert the formula into macro code. I thought I would be able to convert it on my own, but running into some troubles with run time errors. Here is the Excel formula, which is working fine.
I'm trying to set a cell on one sheet to be equal to the product of two cells on another sheet. The problem is that one of the cells on the other page is dependent on the variable T. This is what I've got and it's giving me errors
I've got two columns of data. I'm trying to test if either cell has a value greater than 0 to return a output. Say, in this example "has dividend". My problem is with #NA cells. Is there a way to ignore null values?
I've also got some cells in the data that contain "#VALUE!". What is the basic difference between #VALUE and #NA?
I am trying to write a macro that will insert a formula directly into the cells in column M of my worksheet.
The worksheet has about 3400 rows. When I run the macro it does not adjust the cell reference in the formula so I am getting the same value in all 3400 rows.
making a macro that will scan for duplicates, length & empty cells.
I have the sample file below that does conditional formatting but it doesnt help as much because I want to show the reason for the highlight's on a comment instead.
sample file : [url]
file that might help out: [url]
checks would be: column A - duplicates and/or length should not be over 100 characters column B - duplicates column F - should only contain 2 comma's(or 3 keywords) all columns - check if no entries are found(empty cells)
Is it possible to write a formula that skips x number of cells and have the formula autoincrement as usual. For an examples lets say I want to skip 3 cells and I have entered in the cells listed:
A1= "1" A2= "2" A3= "3"
Then I type in the simple formula in the cell B1= "=A1"
and then drag down but it skips 3 cells so then
B5= "=A2"
B9= "=A3"
If it didn't skip then B1= "=A1" B2= "=A2" B3= "=A3"
this is just an example as I will be writing more complex formulas and need some thing that I can write into the formula so that it skips.
I am looking to average a range of cells which won't always be the same size. How do I create a formula array that will omit empty cells in my formula.
What I'm trying to do is link a cell to give me the sum of 2 different cells located in 2 different tables I created.
So I want to have Cell B5 look for the number in cell B3 in the Table that starts in column Q1 and give me the corresponding number in the same row in the column R1
then lookup the number in cell B1 in the Table that starts in column T1 and match it with the number in Column U1 that corresponds to it in the same row
and Finally give me the sum of both corresponding numbers.
IE.. the number in B3 is found in Q13 which uses the number it corresponds to in R13. The takes B1 finds it in T16 and uses the number it corresponds to in U16.
Then returns the sum of R13 and X16 into B5. (B5 should show 176)
formula using if's and vlookup's to populate a calendar with x's for day a person is gone. however the last couple of people that are gone are not being marked on the calendar even though i use the exact same formula (except for cell numbers and such) for previous, working entries. Here is my formula
