Macro To Paste Formula Into Range Of Cells

Nov 21, 2013

I need to paste this formula

=AVERAGEIFS(A1:A1000;A1:C1000;"0";A1:A1000;"A1001") into range of cells so the changes relatively to its position e.g. in column B it will look like this

=AVERAGEIFS(B1:B1000;B1:C1000;"0";B1:B1000;"B1001") The macro I recorded will paste formula where I need, but all references remain the same. What should I do to make them change?

View 1 Replies


ADVERTISEMENT

Paste A Formula Into The First Cell In The Range And Autofill Down For Remainder Of Cells

Jul 30, 2009

Copy and paste the formula into a range or paste a formula into the first cell in the range and autofill down for remainder of cells?

P.S. when autofilling down, can I specify somehow for it to stop at the last row with data in adjacent cell?

View 9 Replies View Related

Macro To Add Formula In Selected Range Of Cells

Apr 26, 2013

I have a spread sheet with large number of data, problem is all are in various currency so rather than typing =#####.##/a1 in every cell to get the GBP amount (a1 where my exchange rate is linked) I thought if there is macro can do this job for rme.

So what i need is macro which once run enter the formula after the numbers already in the cell in selected or given range.

View 1 Replies View Related

Copy Data In Non-blank Cells Within Range And Paste Into Cells On Another Worksheet

Jan 19, 2012

I have data in some of the cells within range A26:A39

These cells are populated via an IF function on another worksheet. Even though the cells appear blank (as in the value returned is ""), there is a formula in these cells. I think it's called formula blank?

I am looking for a way to copy the data from the cells within the range which are not blank (ie: not = "") and paste this data elsewhere on the sheet in a list with no blank spaces in between.

I anticipate that there will be 4 non blank cells within this range.

Ideally I would have data from the nonblank cells copied and pasted to cells
A40
A41
A42
A43

View 5 Replies View Related

Macro Paste- Macro To Get The Values From Cells D29 And H24 In The Resource Calculator Sheet

Sep 17, 2009

I need a macro to get the values from cells D29 and H24 in the Resource Calculator sheet and populate it into cells N8 and O8 in the Input form.

Users will then be able to change the information in the calculator and click the macro again to populate N9 and O9 and so on.

Is there a way to do this?

I've attached the file for you to see.

View 13 Replies View Related

Formula To Average Range Of Cells And Copying It To Calculate Next Range Of Cells?

Mar 17, 2014

I have a row data corresponding to the measuring of load cell per min and I need to average the values per hour. So I have a column B for the date (from 1-01-2013 to 31-01-2013, column C for the time (0:00:00 to 23:59:00), and D de values per min I want to average. I have to do the same for the rest of the month of 2013 (February, ...., December).

I would like to know if there is a way to create a formula to calculate the average of the first 60 values (to get the average of the first hour of 1-01-2013), and then copy it to get the average of the following 60 (average of the second hour in 1-01-2013) and so on.

If there is no way to do it, I would like to know if I can do it using functions like average, match, index, offset, what would be the best match of those functions.

I also tried it by doing the analysis in another tab and using the function "averageifs" with two criterias: one for the date (example 01-01-2013) and another one for the hour (example 0:00:00), but it didnt work, it show error: #value. I inserted an extra column in the data tab with just the hour (example 0:00:00) in front of the corresponding column with (example 0:01:00, 00:02:00, etc)
Equation I used for this:

=AVERAGEIFS('Data (min)'!D$6:D$43206,'Data (min)'!$A$6:$A$44646,A6,'Data (min)'!$B$6:$B$44646,B6)
=AVERAGEIFS(TAB AND COLUMN WHERE THE RAW DATA IS,RANGE OF CRITERIA 1,CRITERIA 1,RANGE CRITERIA 2,CRITERIA 2)

View 2 Replies View Related

Paste In Blank Cells Within Range

Oct 28, 2011

I am trying to write a macro which will copy a formula located in cell "A1" and paste it into all blank cells within the range "B1:B20" .

View 9 Replies View Related

VBA - Copy And Paste Various Cells NOT In Same Range

Dec 17, 2011

Proficient in Excel, very new to VBA. Up against a deadline on a project that entails consolidating data from 30 + workbooks (each of which has 3-5 worksheets; layout is the same in all worksheets) into one consolidated "rollup" workbook. The inefficient way would be to move all the worksheets into one master workbook, and then link each cell to each worksheet, one-by-one. I found a few threads online with some vba code that has me "close" to what I need to accomplish, but not close enough. The code below will take each worksheet in the workbook and bring back the data in a range of rows and columns. That is not what I need. I only need to bring back SELECT cells of data (i.e. cells E5, H12, J19, etc.) - not everything in that range.

Sub CopyRangeFromMultiWorksheets()
Dim sh As Worksheet
Dim DestSh As Worksheet

[Code].....

View 9 Replies View Related

Copy Paste To All Cells In Range

May 8, 2013

How can I copy cell B13 and paste it to all the cells in range H13:Q34?

View 2 Replies View Related

Paste A Selected Range Of Cells

May 11, 2007

I think I have the comand to select a range of cells, but can not figure how to paste this selection later in the spreadsheet.

This is how the application works.

I have a spreadsheet that I am using as a template. The first 10 rows have to be repeated later in the same spreadsheet after I make a manual page break.

I the spreadsheet I am doing the following commands:
With xlApplication.ActiveSheet
xlPageBreakManual
.Rows(istartrow).Pagebreak = xlPageBreakManual
End With

View 9 Replies View Related

Paste Data To Fit Range Of Cells

Oct 24, 2006

I am working on a Budgeting worksheet. I want to use UserForms as one method of Data entry. I would like to provide users with an input box that would prompt for a start and end date, then the category they are forecasting, and finally the quantity and price by day of the week. Is it possible to paste a 7 day set of data into a 10 (or more or less) day range? For example if the dates entered were for Jan 1 through Jan 10 this would repeat 3 of the days entered. I have attached a sample, not useing UserForm, to better illistrate what I am trying to achieve.

View 2 Replies View Related

Macro To Paste / Values Only In Specified Range

Mar 2, 2012

I have the attached macro that runs goes through files in a folder and "flattens" (removes formula to make them values) and deletes a worksheet.

I was wondering if the macro can flatten only a specified range in the "Master assignment sheet".

I want the macro to only paste/values in range B1:E4500 and G1:G4500.

Code:
Sub Modify_Files()
'Opens all files in the current folder.
'Unprotects Master assignment sheet and transforms all formulas to values.
'Deletes sheet Zip codes.
Dim Filename As String
Dim WB As Workbook

[Code] ......

View 1 Replies View Related

Copy And Paste Macro To Run In Different Range?

Oct 15, 2012

I have a macro that allows me to copy the value of a dedicated cell (I4) and paste it at the start of a range (N4:S4) via a Form Button. When the cell (I4) value changes, I can run the Macro again and it will enter the new value in the next cell along in the range.

This works well across one row. What I would like to do is use this arrangement on more rows. The ranges would be directly underneath eachother.

Is there an easy way of doing it? Or will I have to write out a new Macro for every row?

View 9 Replies View Related

Cut And Paste Of Data Alters SUMIF Formula Range

Jan 25, 2007

I have a time entry spreadsheet where I total hours worked based on the time code entered in the cell next to the hours. I use a formula such as the following: =SUMIF(F11:AS19,"=AN",E11:AR19) which checks cells F11 thru AS19 for the timecode AN and when found, takes the hours in the cell before the code and adds them to the totals way off to the right.

The problem is that when someone does a cut and paste to the time data within the range of F11:AS19 and pastes it somewhere else, like to the next employees data (no formulas are being cut and pasted, just the detail data), the formula for that new line automatically changes to exclude the cells that were pasted over. It is as if Excel thinks that you pasted over that data so it is no longer of interest to you.

It is odd because you can cut and paste smaller ranges within that range with no effect to the formula but if you include the first column or the last column of the range in your cut, then the formula gets altered. If you cut and paste the entire range, the formulas all change to #REF!

View 9 Replies View Related

VBA - Copy / Paste Range Of Cells Every Nth Column?

Oct 26, 2013

I am trying to create a macro that will reformat my data from A2:QB24 into 9 columns starting in N28:V28 with the data from every 9 columns pasted underneath each other.

Basically, I need to start with copying Range A2:I24 and pasting it into cell N29, then copy Range J2:R24 and paste it into cell N53, etc.

View 2 Replies View Related

Copy Range Of Cells And Paste Into Email

Jan 14, 2009

I have a table in excel that I would like to copy into an email and send to my co-workers on a regular basis. Somewhere on the net I have find a piece of code (I've omitted a bunch of stuff here):

View 2 Replies View Related

Macro To Copy And Paste A Moving Range

Mar 9, 2009

I have a macro that copies and pastes into another sheet. When I add a row of data into my spreadsheet I want the macro to be able to change the range size and copy and paste the add row with the prior data.

View 2 Replies View Related

Copy Range Then Paste Special Macro

Aug 9, 2009

I created a macro that copies a range from one worksheet to another as shown below, which correctly copies everything including formulas.

View 9 Replies View Related

Macro To Copy Range And Paste It In A New Workbook

May 24, 2007

Is it possible to write vba code to copy the range A1:A20 from my workbook to a new workbook?

View 4 Replies View Related

Macro To Copy & Paste Variable Range

Aug 15, 2007

I am trying to write a very basic macro to copy and paste, but when I record the keystrokes, step 4 (see below) seems to be recording absolute cells and not relative (?). At any rate, I can't seem to figure out how to get it to select the text the way I want it to. These are the keystrokes I want:

1. Ctrl-c in the current cell <copy the current cell>

2. DownArrow <move down one cell>

3. Shift(hold)-End-Down <select the blank spaces from here down until the next occupied
cell>

4. Shift(hold)-Up <move the selection up one from the bottom to exclude the occupied cell>

5. Ctrl-v <paste>

6. End-Down <move down to the last occupied cell>

I have set the record tool to record "relative" references.

Below is the code that was recorded. It's line 5 that's not working - how do I fix it? What is the command to tell the program to press the shift key and an up arrow?? Such a simple thing, and yet I can't find the answer anywhere! Things sure have gotten complicated since the old Lotus 1-2-3 macro language...

Sub Fill()
Selection.Copy
ActiveCell.Offset(1, 0).Range("A1").Select
Range(Selection, Selection.End(xlDown)).Select
ActiveCell.Range("A1:A17").Select
ActiveSheet.Paste
Selection.End(xlDown).Select
End Sub

View 8 Replies View Related

Formula To Paste Cells Without Override?

Jun 28, 2014

looking for a formula to paste value without overriding another value. For example in my case, I want to replace the value in G column (highlighted in red) by the value from J column (cells that on the same row as the values highlighted in red). For those values in B column that originally start with M180, i want it to be untouched. Right now I dont know what formula should i use.

U can see the attachment for reference.

View 4 Replies View Related

Paste Formula To Numeric Cells Only

Oct 18, 2007

I am looking for macro to paste this formula: [abc.xls] Total BA def'!E12-'[NEW abc.xls]Total BA def'!E12. into any cell that contains a numerical value. the cell reference would change to correspond with each cell it is pasted into. just like it does in excel when absolutes are NOT used. If possible i would not want it to affect any cells that contain headers which would only have letters in them. If this is not possible it would still be worth having the macro replace everything with something in it and i could just replace the headers from an original file.

View 2 Replies View Related

Copy And Paste Macro Or Formula

Nov 19, 2013

I would like a formula or macro that would recognize an answer to a question and populate a group of headings in another sheet.My thought is it would be copy and paste related.

Specifically, =If(sheet1A1=2013, then show January 2013, February 2013, March 2013 etc in Sheet 2A1-A120.

I would have all these months written out somewhere else to be copy and pasted.

View 3 Replies View Related

Automatically Copy Formula Range On Change & Paste Values

Oct 27, 2008

I want to automate the following steps when cell A8:A11 changes in sheet "InfoAA":

(1) clear contents and formats of cells A1:A4 in sheet "InfoBB"
(2) copy cells A8:A11 of sheet "InfoAA" (which are formulas) and past it as text in cells A1:A4 of sheet "InfoBB".
(3) then automatically run a recorded macro named "BoldFirstName"

See attachment.

View 6 Replies View Related

Copy And Paste Range Of Cells Using Flexible Ranges?

May 16, 2014

I am trying to Copy Cell from one sheet to another sheet starting on A7 and then going to V ? i have a formula that figures that out for me just need another formula or VBA to copy it to the new sheet. i will attach the a test of the file.

View 3 Replies View Related

Copy / Paste Dynamic Range Of Cells With Data From One Day

May 28, 2014

I have a range of cells with data from one day. This range is "C36:K63"

Each day, the prior day's range needs to be copied and pasted into a new range that begins two rows below where the prior day's range ends.

Thus, day two should copy "C36:K63" into a new range: "C65:K92"

As you can tell, the rows will change each day, but the columns will always remain the same.

How can I create a macro that allows a user to copy data from the most recent range and paste it into a new range?

i.e. if there is no data in C65:K92, the macro should copy the data from C36:K63 and paste it into C65:K92. Then, the next day, the macro would copy the data from C65:K92 and paste into C94:K121.

View 2 Replies View Related

Copy Non Blank Cells & Paste As Values To Another Range

Aug 30, 2008

I'm trying to copy the non blank cells in an area ("B120:K239"). and special paste (values only) to the next blank row of the actual work area (3 pages) within the worksheet. The area that this needs to paste to is between("B10:K29, B44:K63, B78:K97"). Problem is that if there are more rows to be copied and pasted then there are open rows on the first sheet it gives an error due to the rows outside those areas having different formats (merged cells and that)

Question: Is there anyway to special paste between ranges? I've tried to hide the inbetween rows and that still doesn't work. Could it be possible to add something to this code to ignore hidden rows or to only paste to visible rows?

Sub Special_Paste ()
Application. ScreenUpdating = False
With Range("B119")
. AutoFilter Field:=2, Criteria1:="<>"
With Range("B120:K239")
Application.CutCopyMode = False
.Copy
With Range("30:43")
.EntireRow.Hidden = True
With Range("64:77")
.EntireRow.Hidden = True
Dim NextRow As Range
Set NextRow = Range("B97").End(xlUp).Offset(1, 0)...............

View 8 Replies View Related

Paste Into Range But Skip Protected/Locked Cells

Feb 29, 2008

I've been trying to paste formula throughout a range of cells in the same column. Trouble is, I protect some sub- total cells and don't want the formula to paste over those sub-total formulas.

If I protect the sheet and paste the formula throughout the column including the protected cells, I would get an error message.

How can I paste the new formulas without getting into trouble of the protected cells?

View 8 Replies View Related

Copy A Formula And Paste Into Adjoining Cells

Oct 27, 2008

We have many spreadsheets in my lab. We have been using them for YEARS. Two days ago we ran into a bizarre problem. If we copy a formula and paste into adjoining cells we get the following

Init Values Formula copied & Pasted Results in B column
A column B Column
10 =A1* 10 100
15 =A2*10 100
20 =A3*10 100

If you copy Range("B1") and Paste it to Range("B2:B3") you get 100, 100, 100 NOT 100, 150, 200. If you click on range("B2") it says =A2*10 but the value 150 does not appear in the cell. If you manually type a formula into each line, the results are what one would expect. If I open a new workbook, copying and pasting works as always.

View 3 Replies View Related

Macro For Cut / Paste Selection Of Cells?

Jun 6, 2014

I need a macro that can cut and paste a selection of 3 cells to a location one row above and 3 cells to the left. I want to run it each time manually from the right cell among the 3. the macro should therefore (when standing on the right cell of the 3):

1. select 2 more cells to the left
2. cut the selection
3. move 3 cells to the left and one cell up
4. paste
5. move the cursor back to the starting location

see attached pic for example.macro needed.JPG

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved