Make A Chart With Data From Several Sheets
Mar 22, 2009
I want to do is be able to take The data from one week for every store and compile it into a chart to show a summary of the company as a whole. I know that I can reference from that chart to each worksheet the values I want, but how would I give that chart the ability to update each time I add a weeks worth of data.
I have attached a file that shows what I am talking about. The sheets labeled Waterloo, Mogadore, through Green are the sheets for each store.
I want to take the last weeks data and put it into a chart as seen on Sheet1. Then when I add data for 3/21/09 I want to make a new chart without retyping the data into the chart.
View 2 Replies
ADVERTISEMENT
Mar 26, 2009
I am trying to combine data from multiple worksheets and make a chart. I have about 200 keywords in every worksheet (about 50), and some of them repeat themselves through worksheets and some don't. For every keyword, I have an associated value in the next column that I want to portray over time (each worksheet is for a different period).
So what I need to figure out is how to be able to pick any 10 keywords from the worksheets and put them in a line chart where I can see the associated value for each period for every worksheet so I can compare my keywords' efficiency. The tricky part is that some worksheets do not contain the keyword and other worksheets contain the keyword in a different cell than the previous wsheet.
View 4 Replies
View Related
Apr 24, 2014
I have read quite a few tutorials but none of them really reference what I am trying to achieve. Essentially I have one column with 2 options: "Compliance" and "Improvement". I am trying to make a dynamic chart based on the number of occurrences. From my understanding you need to use a "Named Range" and "Count" but I can not find any information on how you combine the two to make a chart.
View 3 Replies
View Related
Aug 1, 2013
I want to make a spreadsheet that has codes that make items show up on another sheet but how to do this.
For example I would start on sheet 1 and on cell A2 I would type the amount $100. Then in cell B2 I would type in F (I will call this a code).
Now on sheet two I want the amount on cell A2 to show up in a column of items designated for F items. If I had typed in G instead I would have wanted it to go to a column for G items. All the values under the given code will show up in the column that is represented by them.
View 1 Replies
View Related
Aug 8, 2007
I'm currently working on a workbook that has over 50 different sheets. On each sheet there is a column K that I want to graph if desired. From the Main sheet I would like to have checkboxes or something, so that when I press on it, the data from sheet x is added in the graph. Can this be easily done? It's not a problem to hardcode the which-button-calls to-which-sheet (just takes some time), the main thing I cant work out, is how to add a series to a chart, how do delete a series from a chart and so on..
View 9 Replies
View Related
May 20, 2013
I need drop-down combo box to change a graph based on the option selected in the drop-down
Challenge: my Combo box resides on the First sheet only, but the items that populate in the drop-down list are dynamic and change depending on how many sheets exist for this document. The options in the list are Overall, Week 1, Week 2, ... Week N. Overall needs to sum up the data (or I can pull just from the summary page if I am lazy) and the Week N corresponds to a specific sheet added.
I currently am able to get my drop down to populate items correctly, and my macros to create the sheets dynamically with templates just fine (not bad for newbie).
So what I need to figure out is how to tie my drop down to make a scatter plot/bar graph based on the selected option and action. I can't find an attachment option here but here is some code:
Sheet 1 Code:
Code:
Private Sub Worksheet_Activate()
Me.ComboBox1.Clear
Me.ComboBox1.AddItem "Overall"
[Code].....
View 2 Replies
View Related
Jun 28, 2006
how to count sheets to make sheets statistics. (see code)
View 3 Replies
View Related
Jul 16, 2009
I have the following code to create a 3D line graph:
View 2 Replies
View Related
Mar 30, 2008
I have received following macro from someone to delete series but the problem is that it gives error when some sheets are protected, and I want those sheets to protected. When run it will ignore/leave protected sheets but delete series only from unprotected sheets
Private Sub CommandButton1_Click()
Dim Rng As Range, i As Long, r As Range, lVal, uVal
Dim DeleteCount As Double
Dim lRow As Long
Dim dr As Long
Dim dc As Long
dc = Sheets("Deleted Numbers").UsedRange.Columns.Count - 1
dr = Cells(Rows.Count, Sheets("Deleted Numbers").UsedRange.Columns.Count - 1).End(xlUp).Row + 1
If dr = 60001 Then ................
View 4 Replies
View Related
Apr 29, 2006
I am trying to make a chart and I just used the macro recording thing to get the code. I have a variable called days.
ActiveChart.SeriesCollection(1).XValues = "='Pair Data'!R2C2:R24C2"
Instead of going to row 24 I want to go to row days+1 so I did the following:
ActiveChart.SeriesCollection(1).XValues = "='Pair Data'!R2C2:R"&days+1&"C2"
how I can fix it? It highlights the "C2" at the end and says Expected End of Statement.
View 2 Replies
View Related
Mar 21, 2007
1) i have office 2003 on a laptop. within powerpoint, i can create a 'microsoft excel chart 11' object. to create a link to the excel data source, do i have to go through the odbc sql setup? it works, but i don't want my powerpoint to be dependent on some excel file somewhere. what are the other options to insert/make a functional pivot chart in powerpoint with the data also within powerpoint? the data as sheet option does not result in the chart being a pivot, it's just a plain chart. it has to be a proper object, not an image paste or a chart that updates links with the excel file open.
2) i have office 2007 on my other laptop. i can not find any suitable object to choose from to make a pivot chart in powerpoint. what's the best way to go about in 2007 version?
3) am i going about this the wrong way with the objects? should i be after vba code?
View 4 Replies
View Related
Jan 24, 2014
I have a spreadsheet on sheet 1 with a list of customers and their information. So on column A I have the customer number (i.e. k968, e37, p528,...), on column B i have the customer's name, on column C the street's name, on Column D the house number, on column E the zip code and finally the city on column F.
Right now there are around 600 customers in this list.
I have made a userform with a combobox in which I want to select an existing customer (pulled from the spreadsheet). On the same userform I have textboxes (customer number, name, street, number, zip, city). When I select a customer in the combobox, I want this customer's info to show up in the textboxes. I want to be able to change the info and hit Next to store the changes in the spreadsheet. When I do not select a customer from the combobox, I want to add new info in the textboxes and hit Next to store this info as a new customer. The userform also has a delete button. Then I select a customer in the combobox, this customer (and it's info) should be deleted from the spreadsheet when i hit Delete. So the spreadsheet is variable in length.
View 5 Replies
View Related
Apr 17, 2014
I have never used charts in excel unfortunately. I just finished watching a few tutorials but still a little confused. I have a WS with a list of items I want to make various charts of how do you make a chart that adjusts when new items are added? (thus dynamic data) Do you need a macro to do this or is it just standard by defining a range within that sheet?
View 7 Replies
View Related
Jan 8, 2010
I have data:
Jan Feb Mar Apr May
2009years 56 45 42 50 62 - series1
2010years 48 47 45 48 55 - series2
I need make line chart from 3 series. First two are series1 and series2. Third is percent change between 2010 and 2009 years every month (series3). First two are easy, but third is very difficult for me, becouse I haven't row with percent change and I can't haven't it in my exercise.
How can I make it without new row with percent change?
I tried it with Data Source in chart, also formula in Name Manager, but it doesn't succeed
View 9 Replies
View Related
Oct 3, 2007
I would like to update a chart after I have updated the underlying data just by clicking a button and displaying the updated date in the chart. Does anyone know how to do this? Currently I am having to manually click on the graphs line in the chart, which highlights the columns data, then manually extend this for the chart to update. And then I am manually typing in a date cell in the chart. There MUST be a cool way to do this.
View 6 Replies
View Related
Jan 7, 2013
In a chart series, I have and end number for a row that I have been updating manually everytime I enter a new fuel tank fillup. Is there a simple way with the chart series to just say always go to the last data in the specified column?
See my example here, instead of the 137 in the series is there someway to just say "last data row"?
[URL]
View 1 Replies
View Related
Feb 8, 2013
I'm trying to plot a chart of some sort in Excel to display 4 angles that different blood vessels branch off the aorta. Ideally I'd like to input the values of these angles which would vary from patient to patient and have them be displayed in some kind of chart. The chart I'm hoping to achieve would be cirular with the 4 angles represented by spokes which extend out all of the same length. I've attached a rough sketch to show what I'm trying to achieve and I'd be hoping to be able to change each angle in a worksheet and have the chart update to reflect.
View 9 Replies
View Related
Aug 14, 2014
Or at least with a formula?
This is the chart formula for the report:
=SERIE(Report!$B$10;Report!$A$11:$A$30;Report!$B$11:$B$30;1)
View 3 Replies
View Related
Jul 17, 2013
I have a chart with percentages and most of them are >40% so I would like te values to start at 40 in the y axis but I would also want to have the 0% show (as it stands there is nothing there) It is a double y axis chart where the % is shown with just a dot and the other Y axis is the actual column. Im not sure if I'm making sense but I would just like to have the 1st value in the secondary y axis be 0 and the 2nd value be 40, and from that point forward scale in intervals of 5%.
So the values in the y axis are: 0%, 40%, 45%, 50%......
View 1 Replies
View Related
Jun 18, 2014
I have created a spreadsheet which uses data validation to allow a user to select a company, start Date, end date, and projected months in order to output different figures. I have attached a spreadsheet to this post in case that was hard to understand.
Since there is data validation, indexing, and matching going on, as different selections are made, various tables change as a result. What I mean as you open the example sheet and start messing around with the data validation boxes.
The problem I am encountering now, is creating a chart that will also keep changing as the user changes their selections in the data validation boxes. I am unsure if this is even possible, but I figured it was worth a shot to ask. On the example sheet, I have included a graph similar to the one I want, but it only contains data in a certain range of cells, rather than dynamically changing to accommodate whatever data is outputted.
Here is what I am looking for in the graph:
1. Whatever dates are selected by the user in the data validation boxes, along with the projected dates will be on the x-axis.
2. The PMPM figures associated with the selected dates, and the projected dates on the y-axis.
3. Ability to make different selections from the data validation boxes and still have a dynamic chart that keeps updating itself.
View 2 Replies
View Related
Dec 30, 2013
we all have a team, and we are scored on calls, appointments, demos, proposals, and revenue. Rather than asking us to do one or all of these metrics, I would like to have a bulls eye chart that could show people their bonus eligability, so if for example 50% of the circles are touching the bulls eye circle, you would be able to adjust what you need to work on for bonus.
Here is a sample graph.
sample structure.jpg
Here is sample data I am trying to work withsampledata2.xlsx
View 1 Replies
View Related
Jul 17, 2014
I have a project coming up where I will receive tables in a certain format. I want to be able to create a macro that well create a chart based on a single inputted cell (start of data). The chart will have 4 series and five values per series. See the link below for sample data! The first data point is not in the same place in the sheet, but the table will have the rest of the data relative to that!
[URL] .......
View 2 Replies
View Related
Jul 26, 2013
I have an excel sheet that lists a bunch of different recipes. Right now I have all the recipes saved in individual sheets. Each of these are hidden when the sheet is opened. I have a main sheet which lists all of the recipes names and when clicked, the specific sheet opens up. What I am looking for is a code that will hide all of the sheets except for the sheet "Sortable List" and "Detailed Lists". Each of the buttons I have which open up the recipe sheet look like this:
VB:
Sub Banana_Split()
Sheets("Banana Split").Visible = True
Sheets("Banana Split").Select
End Sub
See I think the user might click on a bunch of the names to see the recipes and then get overwhelmed with there being so many open sheets.
View 5 Replies
View Related
Dec 7, 2006
what im creating is a live odds program for NFL football... and in my workbook I have ALL the teams as individual sheets.
The problem im having is say im looking at the calculations for Pittsburgh on the pittsburgh sheet, and my macro decides to update.
What it does is pulls me away from the pittsburgh sheet and goes through all the updates for all the teams on all the sheets. By the time its updated all the odds for all the sheets and running and highlighting with the other macros I have to click back to Pittsburgh and view again for like 20 seconds.. and away she goes again updating the sheets.
Is there any substitute for "select" in the programming where it will not select the sheet.. but just update it "behind the scenes" ?? making the page static and remaining viewable while it runs all the processes in the background??
( yep im pretty new at all this, but i have a great method for calculating games and winners each week, but probably better without looking for 20 seconds waiting, clicking back to the sheet and looking for another 20 seconds .. etc etc .)
View 11 Replies
View Related
May 21, 2009
I am trying to make book to represent time frames from sheet 1 to sheet two. The times are at the bottom of the sheet represented by letters from the alphabet eg, A is 6:30 in the morning to 2:45 in the afternoon. B is 8:45 in the morning to 5:00 in the afternoon ect, ect . I need to have the time represented in color or maybe a diagonal line through the cell in sheet 2 where each letter and corrosponding time frames are. Eg, I have given an example of the time frame "A" in column C in sheet two. I will make a sheet for each day of the month, so all I need is an equation for row "C"(Monday the 16th) in sheet 1.
View 4 Replies
View Related
May 15, 2014
i have a names list in range P2:P100
like
P2 = A
P3 = B
P4 = C
P5 = D
P6 = E
P7 = F
then create the sheets with name A, B, C, D, E, F
View 1 Replies
View Related
Oct 19, 2009
I found sheet code on the forum that highlights the both the entire row and column when a cell is selected.
This is great, but is there a way I can make this an add-in so it is easily available in all workbooks and sheets?
View 11 Replies
View Related
Dec 23, 2008
I have a workbook with many sheets, basically all the sheets are almost the same template with fill-in information for different type of jobs, and for the most part, the information is located in the same areas in each sheet.
I need to look in each sheet for a cell labeled, Committee ID:
And then copy it and the cell to the right of it, so for example:
A8 hasCommittee ID:
B8 hasC1234N
So, loop through all the sheets and get these values and then paste them into a new sheet in the same workbook and call that sheet Report. When pasting data into the Report sheet, insert a space between each result.
View 9 Replies
View Related
Aug 21, 2009
OR can I? I get a "Run Time Error '1004' Select Method of Worksheet Class Failed"
Is there anyway around this?
Basically all the sheets are hidden from the user except for the Entry sheet. They input there data on there and then they press a send command button which then needs to copy that information to a hidden sheet. This is where the problem occurs.. Thought maybe their was a way around that or do I need to unhide the sheets during the macro and then rehide them again?
View 13 Replies
View Related
Jun 9, 2007
I want to create a form and use VBA to make a combo box list all the sheets in a book. Is it possible to select multiple entries like in HTML? I would like the user to be able to select the sheets they do not want to delete before a macro runs.
View 2 Replies
View Related
