Make Simple Chart Showing Angles

Feb 8, 2013

I'm trying to plot a chart of some sort in Excel to display 4 angles that different blood vessels branch off the aorta. Ideally I'd like to input the values of these angles which would vary from patient to patient and have them be displayed in some kind of chart. The chart I'm hoping to achieve would be cirular with the 4 angles represented by spokes which extend out all of the same length. I've attached a rough sketch to show what I'm trying to achieve and I'd be hoping to be able to change each angle in a worksheet and have the chart update to reflect.

View 9 Replies


How To Make Simple Card / Board Game In Excel

Jun 3, 2013

I am looking to copy a simple board game in Excel

Basically it would be a simple race. Containing 4 counters (blue, green, red and Yellow) and 10 squares each.

There would be 40 cards 10 blue, 10 green, 10 red and 10 yellow. Cards would be draw randomly and the counters move respectively. I would be thinking about starting with =RANDBETWEEN(1,10).

I have no knowledge of VBA/ macro but would welcome ideas with what formulas/ commands to use.

I have added some snapshots to show what I would be looking for.


View 4 Replies View Related

Making A Simple Chart

Jun 1, 2009

Im trying to create a bar chart that contains required hours per week with a line of hours worked going across the bars, im struggling to make this work and have basically no experience of making any sort of charts or graphs.

I need to create this using vba but to begin with I cant even make the chart manually! Where its all going wrong is the column line for required hours is so thin it looks rubbish. Its a bar chart then I formatted the series of total hours to be a line chart.

View 9 Replies View Related

Simple Scatter Chart

Jun 16, 2006

.ChartType = xlColumnClustered

plots a chart with stacked columns. So i was wondering what the chart type i should specify to get a simple scatter chart.

View 2 Replies View Related

Simple Button Suddenly Make Excel Crash On Saving Then Replace With New One And Work?

Mar 26, 2014

So i got a few macros on a worksheet and one of them is simply :

Sub Pr_Removefilter()
End Sub

Ive worked on the excel a couple of times, everything fine. Then it started crashing upon saving (after changes made that had no possible connection to the macro, on another sheet). After a few painfull trials and errors i located the problem to be this macro button. I erased it, created a new one with the EXACT macro and it works. Why?..

View 1 Replies View Related

Unable To Create Simple Win / Loss Chart

Dec 4, 2012

I have a # of games played column (Column A), a # of games won column (Column B), and a number of games lost column (Column C).

I'm trying to make it so Column C automatically enters the number when I put in the number in Column B.


Games Played........Win........Loss

For the fifth game played, if I won it, how do i make the 2 to automatically enter into the loss column when I put in the number 3 in the win column?

View 2 Replies View Related

Odd Chart: Combine Data From Multiple Worksheets And Make A Chart

Mar 26, 2009

I am trying to combine data from multiple worksheets and make a chart. I have about 200 keywords in every worksheet (about 50), and some of them repeat themselves through worksheets and some don't. For every keyword, I have an associated value in the next column that I want to portray over time (each worksheet is for a different period).

So what I need to figure out is how to be able to pick any 10 keywords from the worksheets and put them in a line chart where I can see the associated value for each period for every worksheet so I can compare my keywords' efficiency. The tricky part is that some worksheets do not contain the keyword and other worksheets contain the keyword in a different cell than the previous wsheet.

View 4 Replies View Related

Simple Line Chart With Buttons To Choose Datasets

Apr 19, 2014

I want to create a chart on a sheet. If I were charting one data set it would be real simple; I could do so by selecting the range of data values which are in a single column with the respective dates in another column and chart it with data on y, dates on x.

Each point was sampled on a day, only one point per day. I have a table for each person, one column has the data point, the other has the date it was sampled on. I would most like to pair each for not every person has a datapoint sampled on each day.

I have ten individuals with that metric (dataset based on the same sampling). I want to add and erase a line on one chart for any and each person by clicking a toggle button for that individual so we can do any comparative thought of.

View 5 Replies View Related

Format Simple Graph Y Axis Of Pivot Chart?

Nov 19, 2013

I have a pivot chart which has one Axis field (Cell Ref2) and one Sum of Values field (which is a table series of percentages calculated from formulas)

I see the graph like I'd expect, but I'm struggling to get it to show percentages rather than basic integer units on the y-axis? Usually I would imagine to just right click on the y-axis : Format Axis, and expect to see something to change the display units, but it is only for hundredths thousands etc rather than a percentage ? The units themselves in the table for that value series are in percentages so I don't see why it isnt showing the percentage units in the first place.

View 1 Replies View Related

Chart Not Showing Zero Values

May 9, 2011

I'm making a chart for values of L6:L40 which are all percentages.

The chart is a bar graph..

On C6:C40 i have movie titles. (the amount which vary by week.

ON MY CHART.. i always have at the bottom a bunch of bars that just show 0.00%

How can i get the bar graph to only recognize values either where..

values are greater than zero in the l column rows.. or value is not equal to "" null in the c column?

Is this possible?

View 9 Replies View Related

Chart Showing To Today

Dec 16, 2007

I have a line chart displaying monthly profits. Is there a way that I can just display the data up to todays date. As the days got on, I want the chart to grow. I currently have the whole month on the chart and I want to get rid of the straight line showing to the end of the month.

View 9 Replies View Related

How Do You Stop 0's From Showing Up On A Chart

Dec 5, 2008

I have data that has values showing 0 and I don't want them showing up on the chart. I have excel 2003 and 2007 that I need it to work for.

This is what I am using for excel 2007 and it works fine.

=IF(COUNTIF('Closed Transaction'!I6:I38,"Friends")=0,NA(),COUNTIF('Closed Transaction'!I6:I38,"Friends"))

I need a forumla for excel 2003. The one above still shows the 0's on the chart.

View 9 Replies View Related

Chart Not Showing Results From Formula

Jun 16, 2014

I have a spreadsheet (attached) that has a formula, which calculates the number of days between two dates if another field contains data. My problem is that when I chart the data, it isn't showing up in the chart. Cell G1 (Tab 1) contains a 1 because the document was returned 1 day late. This isn't showing up on the Chart (Tab 2).

Read & Sign Tracking-061614.xlsx‎

View 2 Replies View Related

Chart Showing Date Formats

Jul 20, 2012

I have a spreadsheet that has two columns. Column A is a date format and column B has the number of days between both dates over 2 years analysis is =A8-A7.

However when i come to build a chart its all wrong as the dates are following a weekely format, can i adjust this to pick up only the dates that are showing on the cells in column A? also is ther ea way which teh #VALUE! doe snot show?





View 2 Replies View Related

Pivot Chart Showing Zero Avg As + Or - Values?

Dec 14, 2012

I made a chart to show performance above and below average for sales teams.

When team is selected with no salesperson, value should be 0.

Employee selected and will show there week by week trends above or below. Seemed like a good idea.But the zeros (team level) are being displayed as plus or minus bars which isn't right and the labels show "0".

I find the pivot table is actually showing strange values if you click in the cell even though it displays a 0.Notations positive or negative like 3.80647894157197E-16.

The underlying data is an average formula and selecting invidual criteria, I show there are no anomalies.

View 2 Replies View Related

Showing Only Active Months In Chart Data?

Feb 5, 2013

I've attached a chart with variance data for each month of the year. I've used an IF formula to "NA" the months with no data, so nothing shows up in the chart. However, I would like to know if it's possible to have the chart only show months with data. The IF formula gets rid of the data point but it doesn't prevent the chart from showing the month on the X axis. In the attached file I manually selected the three months with data.

View 4 Replies View Related

Formula: Looks Up A Chart Showing Scores Referenced Against Each Other

Apr 20, 2007

I have a formula that looks up a chart showing scores referenced against each other as shown below. (Scaled down version)
******** ******************** ************************************************************************>Microsoft Excel - Table Template.xls___Running: 11.0 : OS = Windows Windows 2000 (F)ile (E)dit (V)iew (I)nsert (O)ptions (T)ools (D)ata (W)indow (H)elp (A)boutA1B1C1D1E1=
ABCDE12006-2007Altofts JnrsCarleton JnrsEmpire ColtsHemsworth Terriers2Altofts Jnrs- 3Carleton Jnrs12-3-4-0 4Empire Colts - 5Hemsworth Terriers -Results
[HtmlMaker 2.42] To see the formula in the cells just click on the cells hyperlink or click the Name box

The problem is when the score is i.e. 12-3 the formula is only looking at 2-3. Hence this actually then shows as a defeat. The formula causing this problen is an array and shown as
Question. How can the formula be changed to reflect scores like 12-3 to be shown as a home win.............

View 9 Replies View Related

Showing All Choices On Dynamic Chart Using Lookup Formula

Jul 28, 2014

I've created a simple dynamic chart using a combination of data validation and an index match match formula. Every time the user makes a choice the chart updates with the right info. However is there a way to create a choice where the user can show *all* the choices at once on the chart ?


View 3 Replies View Related

Excel 2010 :: Values (from VLookup) Not Showing Up In Chart

Oct 22, 2012

I have excel 2010....

I am having problems creating a chart off of the following data. Each of the cells which have a numerical value are v-lookuping from another sheet. It needs to remain this way as when I switch brands (through data validation), the numbers will update and the chart should as well. Right now, the chart shows these values as zero. I have done this a million times in excel 2007, but now with 2010, I keep having this problem



View 2 Replies View Related

Showing Overlapping Series (seasonal Data) On A Chart

Aug 30, 2006

Attached please find two charts based on data from 2003 until year-end 2006 (estimated). I want to show that the data is "seasonal" and sales depends on the month it falls on... i have several issues with the chart, is the second chart "too" overlapping and is there too much data to read? 2) how can i get the text boxes to go in the same direction as the chart..i know in powrerpoint you can move the direction of the textbox but how in excel? in sum, i can only choose one chart but still want to make each chart look much better.

View 3 Replies View Related

Line Chart Showing Values Over Time Intervals

Feb 18, 2007

I'm trying to do a line chart showing two teams and their cumulative scores over the period of a game. I've attached a sample with mock data. Is it possible to change the x-series of the charts to display custom time intervals like 0 min 1 min, 2 min, 3 min, 4 min, etc? Currently the x-series only has labels for each specific time there was a change in value. I've tried to change the scale but the options that I want aren't there.

View 2 Replies View Related

Average Of Angles (headings)

Oct 11, 2007

I have data sent to me describing angles as integers from -180 to 180. I need to average these angles together. For example, the average of 10 and -2 should be 4. Great. However, the average of 175 and -175 should be 180.

Has anyone ever worked with this type of issue?

(I've thought about converting -175 to 185, but then I have trouble with 5 and -5, which becomes 355).

I should probably note that I have a list of angles, not just 2. The analysis I need to do is 1) average of all angles and 2) difference from the average for each angle.

View 9 Replies View Related

Cosine Of Angles Based On Corresponding Cell Value

Apr 26, 2008

Iv got Column A with angles between 0 and 1.56 radians. These angles are generated randomly, so it can be 0.22, 0.56,1.55 etc etc...Now in column B Iv got to carry out a function. The function is =43.22/COS(AX) X depends on the corresponding value in column A.

Every thing is fine up to here and I can do it...BUT I only need to carry out the function if the angle in Column A is smaller than 1...And if the value is bigger than 1 it only needs to output a value of 80. Thats it so...depending on the value in column A it will either carry out =43.22/COS(A) OR just make it show =80.

View 2 Replies View Related

Can Draw Shapes Or Angles Based On Data

Apr 16, 2008

Can Excel Draw Shapes or Angles based on Data?

I have a radiation Excel file that solves for Radiation intensity using Distance and shielding as reducing factors.

Similar to a circle of light being less intense with distance so is radiation.

I need excel to draw a circle from a point specified based on a value I give.

For example at 1 ft I might have 500 R in 1 hour (life threatening!)

At 16 feet I have about 2 R in 1 hour (not safe for too long)

These circles would be overlayed on an map.

I would like to draw a new circle at various distances, simialar to a bullseye.

I would also like a triangle drawn based on angles and SIN / COS / TAN formulas

Could this be done in VB or preferably without.

View 11 Replies View Related

Shapes Or Angles Based On Cell Data

Apr 17, 2008

Can Excel Draw Shapes or Angles based on Data? I have a radiation Excel file that solves for Radiation intensity using Distance and shielding as reducing factors. Similar to a circle of light being less intense with distance so is radiation. I need excel to draw a circle from a point specified based on a value I give. For example at 1 ft I might have 500 R in 1 hour (life threatening!) At 16 feet I have about 2 R in 1 hour (not safe for too long). These circles would be overlayed on an map. I would like to draw a new circle at various distances, simialar to a bullseye.
I would also like a triangle drawn based on angles and SIN / COS / TAN formulas

View 2 Replies View Related

Using VBA To Make A Chart

Jul 16, 2009

I have the following code to create a 3D line graph:

View 2 Replies View Related

Make A Chart By Using Macro

Apr 29, 2006

I am trying to make a chart and I just used the macro recording thing to get the code. I have a variable called days.

ActiveChart.SeriesCollection(1).XValues = "='Pair Data'!R2C2:R24C2"

Instead of going to row 24 I want to go to row days+1 so I did the following:

ActiveChart.SeriesCollection(1).XValues = "='Pair Data'!R2C2:R"&days+1&"C2"

how I can fix it? It highlights the "C2" at the end and says Expected End of Statement.

View 2 Replies View Related

Pivot Chart Object: Find Any Suitable Object To Choose From To Make A Pivot Chart In Powerpoint

Mar 21, 2007

1) i have office 2003 on a laptop. within powerpoint, i can create a 'microsoft excel chart 11' object. to create a link to the excel data source, do i have to go through the odbc sql setup? it works, but i don't want my powerpoint to be dependent on some excel file somewhere. what are the other options to insert/make a functional pivot chart in powerpoint with the data also within powerpoint? the data as sheet option does not result in the chart being a pivot, it's just a plain chart. it has to be a proper object, not an image paste or a chart that updates links with the excel file open.

2) i have office 2007 on my other laptop. i can not find any suitable object to choose from to make a pivot chart in powerpoint. what's the best way to go about in 2007 version?

3) am i going about this the wrong way with the objects? should i be after vba code?

View 4 Replies View Related

Make A Chart With Data From Several Sheets

Mar 22, 2009

I want to do is be able to take The data from one week for every store and compile it into a chart to show a summary of the company as a whole. I know that I can reference from that chart to each worksheet the values I want, but how would I give that chart the ability to update each time I add a weeks worth of data.

I have attached a file that shows what I am talking about. The sheets labeled Waterloo, Mogadore, through Green are the sheets for each store.

I want to take the last weeks data and put it into a chart as seen on Sheet1. Then when I add data for 3/21/09 I want to make a new chart without retyping the data into the chart.

View 2 Replies View Related

How To Make A Chart Using A Dynamic Range

Apr 17, 2014

I have never used charts in excel unfortunately. I just finished watching a few tutorials but still a little confused. I have a WS with a list of items I want to make various charts of how do you make a chart that adjusts when new items are added? (thus dynamic data) Do you need a macro to do this or is it just standard by defining a range within that sheet?

View 7 Replies View Related

Copyrights 2005-15, All rights reserved