I have a volumes sheet and based on two criteria (in columns) am trying to pull the corresponding value from the April Results Table. I have product type in C2 (this varies down the column) and depot numbers in D2. The table i am trying to match has depot numbers in column A2:A93, and Product type in Row 2 (B2:P2), where the two criteria are matched, i need it to return the corresponding figure. I have tried various combinations of Index and Vlookups but i cant get it to work!
I need to Match to columns of one table to another two columns of another table, both tables are on the same worksheet.
One table has 500 rows more that should not be, I need to find out which of these 500 rows should be deleted, so the two tables should be same. So the batch number and corresponding amount should tie to another tables batch number and amount.
Is there a function to convert the data shown in table 1 to table 2 without rearranging the columns and rows? because i don't want to use TRANSPOSE. I want a function, somthing like SUMIF with OFFSET or INDEX and MATCH or any other function.
I have two columns one is web addresses and the other is email addresses but the rows do not line up. I was hoping that since the second half of the email address matches the web address I could somehow sort them so that the email address column and web address column match up. Here is an example but keep in mind that this list is about 9k long and this is just a sampling so you may not see any in this example that match. Also I may have more than one email address per website.
I'm using VLOOKUP with MATCH to find data in a table. I now have to add a third condition to the look up. I've attahced a file as an example. I'm not sure how to list the data for the third condtion. I created another table with the data for third condition.
I have a sheet (name “master”) that I need to compare against data in a table. For each row, I am looking at two columns of information that I need to compare against the data table. The columns are (1) “State of Sale” and (2) “Associate ID”. I need to determine if the associate is allowed to make sales in the state that is identified, which requires looking at the data sheet.
This steps I need to take are as follows:
1 – grab the associate ID and determine if it is in the data sheet. If the ID is not in the sheet, then “No record found”. Else, go to next step
2 – if the ID was found in the data sheet, then the next step is to grab the “State of Sale” and compare against the data table. Go to the row of ID in question, and then go to the column of the State code in question. If there is an “x” in the intersecting cell, then sale is “ok”. If there is not an “x”, then “sales violation”.
IF/ AND/OR I have 6 tables on one sheet that I want to match data and print out the name of the relevant table ie brown, white ,pink etc
There needs to be a data match in both columns of a table before it prints the name of that table. I have tried the following but haven’t quite got it right:
I have a worksheet that has four columns. FName LName FName1 LNanme1. The data doe snot match between the columns... but I need to know which are in both columns.
I need to write a formula that will allow me to compare the LName with LName1 and give me some type of indication there is a match (1, yes, etc.). Ideally, after confirming there is a match, It would create another verification that FName and FName1 also match, but that is not necessary.
I basically have a list of 4000 names in one column (A) and an extract from a report containg 26000 names, again in one column (B). I need to see which of the 4,000 names in (A) appear in the column (B) from the report.
How can I do something to either line up the names, or make them change colour or something so I can see the matches?
I am trying to match up data from 2 columns and then take data from an adjacent column. I.e. take info in cell 2B, search column D for the same data and grab the data (qty) from the adjecent cell (E).
I have run a pivot table state, city, address, floor and all the maths works out fine.. but the name in the 'total' rows, does not match the name in the data rows.. e.g. texas, dallas, 57 oilrig street has total rows saying CA toal,Newark total, 560 mission street total (obviously split across the appropriate rows for each total) but in each case, all those square feet, or dollars add up perfectly, for the data rows above them. double clicking the totals shows no sign of the rogue location... but these same entries are in EVERY set of totals in the pivot table!
POSSIBLE clue.. I generated the pivot at home, on Office 2003, and am now viewing it at work in 2002 version. (buit this could have nothing to do with it at all. Am I missing something obvious, or do i have good reason to pull my hair outr in frustration (first time this has happenned in a year of doing these reports daily)
Column A has donor name, column B has corresponding donation data for 2011. Column C has donor name, and column D has donation data for 2012. Column E has donor name, and column F has corresponding donation data for 2013.
Although Columns A and C and E all have donor names, there are many changes from year to year with the addition and deletion of certain donors so the rows do not match up exactly. Is there a quick way to have the rows match up according to donor names in column each of the three columns? Secondarily, I need to sort by donation amount from highest to lowest (it can either be the total over the three years or based on any single year.
Currently my list looks like this: 2011 2012 2013 A A A B C B D D C F E D H F I L G K M H M
I would like it to look like this: 2011 2012 2013 A A A B - B C C - - D- - E- F F F G G G H - - L - L - - M
Basically, I want to see the year over year giving for each donor. I've attached a sample for refrence. (I can't post the original due to confidentiality requirements.)
1. i am comparing text 2. i have >100 countries, and with vlookup i have to type every single one, and this is what i want to escape (mb i need to refer to an array, or string, or no idea) 3. mb a solution could be sth with index, or match, i just tried it, copying some similar formula from www, but it didn't match the countries, and return the value respective for that country.
E.g. I have China in col1 (1st file), #employees 10 in col2 (1st file), and China in Col 1 in 2nd file. So, a formula should match China & China from both files, and return 10 as number of employees.
I have 3 columns of data and 30,000+ rows. Column A & B are related and column C contains some of the same values as column B but not an exact match. I'm looking for a way to sort columns A & B so that columns B & C match up and the data from column A is moved as well. For any data that has no match, a blank space should be input. Please see below.
A B C
red dog cat blue cat dog green mouse pig yellow horse kitten
A B C
blue cat cat red dog dog green mouse pig yellow horse kitten
I wish to add more criteria to the "Find Feature to Find 3 Matching Criteria in 3 Columns in Excel" (http://www.ozgrid.com/VBA/advanced-find.htm) up to 7 criteria if possible. How can I do this? I wish to display the results in a dialog box or in a different sheet. I also want to run the find feature from a different worksheet, perhaps using a button instead of having to make a selection in the table.
I am using Excel 2007 and I need to search for data patterns that are spread across many columns. I am not sure how to search so that criteria is met across all the columns concurrently.
For example
I am interested in data that matches the following criteria ;
Column B has the value 55 Column C has the value 70 Column D has the value 80
Rows of interest are when all the criteria in columns B,C,D are met at the same time (e.g 55 in B, 70 in C and 80 in D).
I have names is Column A (about 200) and names in Column B (about 800) along with additional info in other columns. Column A was just added to an existing spreadsheet and will be deleted once I accomplish my task. The goal is to come up with the 200 names in column A along with the additional info in the other columns (address, phone) and to delete all of remaining names in B (about 600, 800-200) I'm trying to figure out the most efficient way to do this. I'm not sure if there is a function to match the text in Column A to Column B and at the same time move the row in Column A to match the row the name is located in Column B.
For example John Smith is currently in A1 and John Smith is in B7 and then John's phone number is in C7. I want the John Smith in A1 to move to A7. If I can make that happen for all 200 names I will then delete all rows with no entry in column A.
In an Excel sheet; I am trying to match and align data in column C to data in column A, but it is essential that the data contained in the entire row (coln B thru to coln W) moves when Column C is matched and aligned with column A.
Any formula that can look at the data in multiple columns and check for a match - returning a value such as YES or NO. Below is an example of my sheet.
A B C D E F G
1 Name Number Name Number Name Number Match?
[Code] ..........
Basically the formula would be in Column G and would look at B, D, & F to see if they match or not. In the example above - row two - they all match. So a True, 1, or Text option such as YES would be great. Same as row 3 only you can see they are different.
Please see the attached example. I'm trying to highlight cells only if 2 values in the row match 2 values in another row. If a book title/author combination matches that of another title/author combination in a different row, it would highlight. Some alternate rows will contain different titles by the same author, and some rows will have like titles by different authors...but they should not highlight.
The only situation where highlighting would occur is if the title/author pairing appears in another row.
I'm trying to decide if this would be a conditional formatting/highlighting rule, or if it would be a macro/vbs?
Been a while since I've worked with macros within excel and I can't seem to get what I remember being a basic macro to work whatsoever. I have 2 worksheets containing a massive amount of data and need to pull some cells from one into the other when values in 2 columns match.
To better explain, sheet1 has ID numbers in column G spanning for roughly 1700 rows. Sheet 2 has corresponding ID numbers in column EO. The data I need to copy over is in columns EP and EQ on sheet 2.
So I'm trying to build a macro to compare the values in Sheet1_Column_G to those on Sheet2_Column_EO and when a match is found, copy the value in EO and the adjacent entries in columns EP & EQ over into columns X, Y, and Z on sheet 1.
Couldn't get a VB function together to save my life so I tried working with MATCH & INDEX and didn't get very far either. I've included my current function below.
I have two columns with team abbreviations, one simply says whether they are AL or NL the other is the result of a search with multiple occurrences of the team name. I need to match the long list with the short and put the column header AL or NL in the adjacent cell.
I'm using Excel 2007
The last formula I tried was =INDEX($AY$1,MATCH(BB2,$AY$2:$AY$15,0),0)
The screen shot actually just part of the sheet copied since the screen shot look like a broken html page Ok I give up. I copy and paste a jpg it turns into code, I copy and paste the spreadsheet and formatting vanishes, I don't have a URL for the picture... I did look at FAQs and didn't find picture rules but I will look again. Meanwhile. . .
It's just six columns of data. The short list is in AY from AY2 : AY15 The long list is in BB from BB2:BB505 The column header "AL" is in AY1 and NL is in AZ1
ColA and ColB contains a standard information which is supossed to be my reference. ColC contains my queries for which I need information about their place in ColD.
So I need to match ColC with ColA, so as to retrieve the matched data (between ColC and ColA) from ColB to ColD. Following is the way I expect my result to be..
ColA ColB ColC ColD
niki delhi neha patna vinay mumbaihardik kerala kapil bangalorevinay mumbai neha patna pooja goa hardik kerala
I received an answer in that link
"=INDEX($B$2:$B$6,MATCH($C2,$A$2:$A$6,0))",
Which when tried, surely worked a few months back. I am now using excel 2010. I tried the same again, but this time it does not work for me. Is there something else to do which has been changed in the new excel 2010 ?
I am having some trouble getting a formula to work. I am building a report that pulls figures from a pivot table in another workbook. I am using a vlookup with match function to get the column index to find the relevant data I want. Where I need to add two columns together I am using sum, with the vlookup & match formulas nested in them e.g.:
Where: F13 = Employee number Column C on the pivot 156 workbook is where the employee number is based. The Match formula is then getting the column index from the column headings of the pivot table ie. "FAID"
This in itself works fine, as long as it finds a match in the column headings. This is where i get the error as in the above function "COMD" is not in the pivot table. However I need to keep it included as it may appear on a future pivot table. Is there a way of getting the sum function to complete even though later in the formula it can't complete the vlookup? So it will ignore it, or assume the value is zero if it can't find it? The formula probably needs to do this for all the vlookups as some headings may drop off in future pivot tables.
I have 2 different sets of data: temperature data recorded at meteo-stations defined by latitude / longitude, and major world cities also defined by latitude / longitude.
After the user chooses the station's coordinates, temperature data is pulled out from the first data set; this works! However, I would like to be able to provide information about the closest city to the chosen meteo-station from the second data set.
I have a userform with several textboxes and 2 comboboxes. The data that I need protected from duplication is based in the comboboxes. If I ignore the other fields and presume the following it may be easier to understand:
The comboboxes are populated by the data stored in sheet1 and when the userform is complete, the OK button populates all the data into sheet2
Combobox1 contains names eg, John, Julie, Bob etc Combobox2 contains colours eg, Red, Blue, Green etc
I want the userform to allow the data to be entered into sheet2 only if it is not an exact duplicate of the choices in BOTH of the comboboxes
For Example John Red Julie Red Bob Blue John Blue
These are all ok, however, to try and enter John Red again would bring up a message box indicating a duplicate entry and prevent the data from being entered.
I have a large table about 2000 rows x 2000 columns (small extract below) and i need to get all the non-blank data out of it into just 3 columns ignoring any blank cells. Column A is the customer account number and the other columns contain the prices for the part numbers as described in row 1.
a/c - part no 002000 S01000 S01020 S01040 S01060 S01080
[Code] .......
What I need to end up with is list of Account/Part No./Price like this...
A/C Part No. Price 00017391 S01020 7.2100017391 S01060 10.4500017391
[Code] .........
There will be about 70,000 lines from the table I have.
I have 3 calculations I would like to make based on data in the spread sheet and I can't seem to get them to work with data from the two separate columns.
I tried a few of the index match max formulas I found here and could only get them to work with one column of data.
I have the spread sheet attached and the 3 calks I want to do are blank on the bottom.
