I am trying to work out a formula to determine the maximum score a player has had in one season.
Spreadsheet has a row with say 45, 56, 23, 67*, 43 .... ( the * means Not Out ). Using the maximum formula disregards the record with the asterisk.
My other option is to store the * in a separate field next to the runs.
I am working on a cricket score board in Mircorsoft Excel. This is my first question. When I solve this, I will go ahead.
In the sport of cricket, an over is a set of six consecutive balls bowled in succession. An over is normally bowled by a single bowler.
An over is made up of six balls, each ball counts for 1/6 of an over for the purposes of calculating the net run rate, despite being normally written in cricket's notation as .1 of an over. if a bowler balls 6 consecutive balls. it is called an over and writting in cricket's notation as 1 over.
My question is that Team A played their two matches. In first match, Team A played 47.4 overs and in second match Team A played 49.5 overs. The total number of overs in two matches Team A Played 47.4 + 49.5 = 96.9. But in cricket sport we will sum up it like this 47.4 + 49.5 = 97.3. I mean that Team A played 47 overs and 4 balls in their first match and in the second match they played 49 overs and 5 balls.
How can I sum up it in Excel Worksheet?
I want to see if i can make a formula that works out how a player got a score based on a scoring system. See the attached file for more details. I want this to show that the player scored or didn't score, played a full match or was a substitute, was booked or wasn't booked and was sent off or wasn't sent off.
View 5 Replies View RelatedI am trying to set up a cricket spreadsheet
I cannot work out how to set up the 'Overs Bowled' column.
I somehow need Excel to recognise a figure in another format other than decimal.
There are six balls in an over so when I enter '5.5', this means 'five overs and five balls' rather than '5 and a half overs'.
i have this formula in cell C14
="Today Is The "&U3-V7+1&"th Day Of "&IF(VLOOKUP(U3,AC10:AD17,2)="winter","Winter","")&IF(VLOOKUP(U3,AC10:AD17,2)="Fall","Fall","")&IF(VLOOKUP(U3,AC10:AD17,2)="Summer","Summer","")&IF(VLOOKUP(U3,AC10:AD17,2)="Spring","Spring","")
it returns " Today is the 92th Day Of Summer " *number and "Season" changes*
i want changing the 92th when the number changes.
so if it was 1 it would be "1st"
2 would be "2nd"
3 would be "3rd"
than 4-9 would be "4th,5th,6th..etc (as normal)
also counts for double digit number
21st 32nd 43rd
and also counting the days..today is the 92 day of summer but when it gets to the 1st day of fall it going to say 94th day of fall..when i want it to say 1st day of fall... than start counting the days of fall than so on for each season..
here are the dates for the seasons
3/20 is spring
6/21 is summer
9/22 is fall
12/21 is winter
3/20/2010 is spring
6/21/"" is summer
9/22/"" is fall
12/21"" is winter
I created a spreadsheet to track my bowling scores by date by lane
Date Lane game 1 game 2 game 3 total
What I would like to do is show my total average by lane for the season. 33 weeks. From there I think I can graph it out.
I am working on an inventory report that the owner would like broken out between in-season items and out of season items. Items with no season code are always in season. Items that have seasonality have a 2 digit season code. A as if Jan, B is Feb, etc. A season code might be CE or KB. CE would be in season from March until May. KB is in season from Nov through Feb and out of season the rest of the year.
We are currently in month G. Is there an easy way to use the two digit season code and determine if G falls in between those two months.
I am trying to make a function which will take a date as input and display the season for that date. i.e. the input 1-Jan-1992 will return "Summer" (southern hemisphere seasons)
View 10 Replies View RelatedI was hoping that my formula would give me the count number based on the Maximum time (latest time) and the Name field...My result is a 0 instead of 62 (the correct answer).
=SUM((Download!$H$2:$H$10=A4)*(Download!$D$2:$D$10=MAX(IF(Download!$H$2:$H$10=$A4,Download!$D$2:$D$1 0)))*Download!$I$2:$I$10)
Would a Index/Match/MAX function be more efficient?
Look in Column E and find the MAX value. Once you find the MAX value, (let's say E27) display the date that's in C27. I bet this is really easy but I've been screwing around with it for over a half hour and can't get the correct result.
View 2 Replies View RelatedI have two columns of data. The first column is the 'type' and the second column is the 'value'. I need to find the maximum 'value' for each individual 'type'
The 'types' are not necessarily next to each other and the data cannot be sorted to do so.
Example:
type value
A 15
B 6
A 21
C 7
B 13
I need to be able to say the MAX for 'A' is 21, the MAX for 'B' is 13 and the MAX for 'C' is 7.
im using spreadsheet works which seems to be very similar to excel. i am making a table full of numbers and i want to count how many times the number 1 appears and for that amount to be displayed.
View 11 Replies View Relatedi was assigned to make a computation for our individual scores using this:
EMPLOYEES A-N
inputs:
SURVEY(0-100)
LH(lost hour)
AHT(average handling time)
compute for:
SCORE
RANK
the SCORE has a total of 100%
so to get the SCORE, each input gets a percentage: SURVEY=40% LH=30% AHT=30% then added.
but the thing is LH and AHT has an equivalent.
LH
0 to 1=100
1.1 to 2=90
2.1 to 3=80
3.1 to 4=70
4.1 to 5=60
5.1 above=20......
eXAMPLE:
EMPLOYEE A
SURVEY(0-100) = 33.00
LH(lost hour) = 12.00
AHT(average handling time) = 14.20
SCORE = CODE
RANK = CODE
now for the rank i just use the code =RANK(SCORE A, SCORE A:SCORE N)
im lost on how to compute the SCORE though coz i can just use =((SURVEY*40%)+(LH*30%)+(AHT*30%))
but the one that needs to be on the LH and AHT are the equivalents and not the inputs.
and there is 1st 2nd and 3rd place. the name of the top 3 employees should be shown under the table.
i have a list of names in column A and a corresponding score for each name in column S.
on a stats sheet B10:B15 was trying to make a top 5 list using =LARGE(Week1!S15:S46,1) ... with Large i am able to get my top 5 from the week1 sheet but how can i assign the corresponding top5 persons from column A15:A45 in week1 to the stats sheet in column A10:A15
I am currently working on a score sheet with list of question.
I have:
On Sheet 1 (will be hidden later)
List of 14 questions (e.g. question 1 = 6 possible answers, for answer 1 is score -2, for answer 2 is score 7... etc).
In column C are possible answers, in column D are the score values.
On Sheet 2 (will be visible for participants)
Drop-down list based on Sheet 1 questions (Sheet 1; Column C)
I have set Cell link for each question so when you choose the 3rd answer, there is number 3, but I need to set different values based on Sheet 1, could be that 3rd answer is score 12. I do not know which function to use (I tried IF, but to me it seems too long and difficoult).
I've seen a few bowling formulas within mr. excel but nothing in code. so i tried it and the only problem i have is when a player strikes.....then the code should add the next two balls thrown..... it works if the next two are strikes but not if there is no 'mark'. So basically its not adding the second ball. The code looks right unless I'm just missing something. heres the code....
View 9 Replies View RelatedI am using data validation for a drop down list e.g Good, Average, None. What i want is when a user selects for example "Good" i need a score to be automatically entered into another cell so that i can then do some calculations.
View 2 Replies View RelatedI have one excel file with three sheets marked 1,2 & 4
Sheet 1. is the place we add the description and the member number. When a member number is entered it gets the member name from sheet 4.
Sheet 2 is the page I need to change. Currently we can enter any score number in each box between 1 to 5. If we try to enter other numbers we get an error message.
I need to change the form so we can enter 1 to 10. Any other number needs to generate the error message.
Should be an easy fix for experts, but I'm not one of those...
I'm trying to create a "scoresheet" in Excel where a racer has a name and an ID number on the main tally worksheet, with columns relating to their scores for each race. Subsequent worksheets have results from each race (one race per sheet), with the individual referenced by their ID number.
How do I have the main tally sheet "find" that person's score for each event in separate columns so that it can add up their totals? I tried an IF formula to find each score in the subsequent sheets, but that didn't work.
Is there a simple formula to do this? I've been achieving the results by importing the worksheets into a Filemaker database (where the ID number "matches" and updates each score), but that's a pain, and I'd rather do it all in Excel.
If Average Score is:Then return:
Greater than 89A
From 80 to 89B
From 70 to 79C
From 60 to 69D
Less than 60F
Student's Average Score
90
52
75
88
82
53
46
72
99
100
42
53
69
79
84
=IF(A9:A23>89,"A",IF(A9:A23<=89,"B",IF(A9:A23<=79,"C",IF(A9:A23<=69,"D",IF(A9:A23<60,"F")))))
A9:A23 is student's score range
I am getting the correct answer for the first one only...all others are coming back incorrect. I have been working on this one problem for over 3 hours.
i need the formula in colums (l) it needs to find the agents name and the calulate the scores for that agents name
View 8 Replies View RelatedTrying to get a result if I missed 0 hours, I will get a score of 5, if I missed 1 -4 hours, I get a score of 4, if I missed 5 hours, I get a score of 3, etc.
0 Hours Missed5
1 - 4 Hours Missed4
4 - 8 Hours Missed3
8 - 12 Hours Missed2
12 -16 Hours Missed1
>16 Hours Missed0
I have tried a couple of things, but the formulas get way to messy & start to lose cell references.
I'm setting up a scoring system for my rounds of golf. I have four people competing, and i want to be able to put up a page where i can display the best golfer. I have the scores and i want a function that display f.ex "Thomas" if cell d28 is the lowest number of four cells.
I have a workbook with two tabs: Results (containing exam results) and Percentile (containing percentile rankings based on scores). There are different rankings for different exams.
I need the percentile ranking returned (on the Results tab) based on the exam result for each student. e.g. for exam M111 a score of 36 would return a ranking of 95, a score of 18 would return a ranking of 35, etc. I've attached a sample workbook.
Column A has an assement score which reads 1,2 or 3 Columb B should have a value statement based on what it sees in column A
For example
A1 reads "1" ( which is a pass ) , then B1 should auto-populate with the word Pass.
if A1 reads "2" ( neutral ) B1 should read "neutral"
if A1 reads "3" ( fail ) B1 should read "fail"
For the advanced class; I can foresee a situation in the near future whereby the system needs to look at a range numbers, rather then one specific number.
For example
A1 could read "1" which is a pass , or "2", "3" etc are also be a pass.
4,5,6 are neutral
7,8,9 are fail
I am organizing a golf scoreboard for my golf tournaments. Basically, this is what I want to do:
I would like to rank the players that are entered by their score, in ascending order. Basically, I want to take the column for "total strokes" and organize the numbers so that it will rank the numbers that are entered. If there are no numbers entered in a specific row, I don't want that "zero" to be ranked in the list. So for example, if I have five golfers but they are spread out over 10 rows, I would still need to have five numbers in the rank: 1,2,3,4, and 5, not 1 to 10, as if it were ranking the rows that have nothing entered in them.
This is how it will look:
Johnson - Strokes : 70 - Rank :1
Williams - Strokes : 75 - Rank : 3
Patterson - Strokes : 72 - Rank : 2
i can calculate finish "molkky" game scores?
These are rules; you get points after falling sticks (if any falls). Points are 0-?. Goal is to get 50 points. If you get over 50 points, then points go back 25 points.
As you see (attachment) Matts points are 51, so he has now 25 points.
I am trying to distribute the total number of sessions (cell H1) across the groups in column A based on the score of each group (column D). The number of sessions a group receives cannot exceed the max (cell H2) or be less than the min (cell h3).
View 7 Replies View RelatedSee attached.PMS 2.xlsx. I have a table with data on PMS sheet and would like to have something like the example on the Example sheet using data from the PMS sheet.
View 2 Replies View RelatedI'm trying to find a way to return a value (score) based on the results in a table. I've been trying to use index and matches but am starting to think this will not be the answer for this one.
In the example attached, I have a section called report. For each project, there are criterias which need to be scored based on the values in the lookup table.
For example, project 1 has a result of 200 for criteria 1. On the lookup table 200 in criteria 1 would receive a score of 2. This result is then populated in column L as the score of this criteria.
