Assign Score To Value By Looking Up Criteria In Table?
Aug 19, 2014
I'm trying to find a way to return a value (score) based on the results in a table. I've been trying to use index and matches but am starting to think this will not be the answer for this one.
In the example attached, I have a section called report. For each project, there are criterias which need to be scored based on the values in the lookup table.
For example, project 1 has a result of 200 for criteria 1. On the lookup table 200 in criteria 1 would receive a score of 2. This result is then populated in column L as the score of this criteria.
I have a spreadsheet with several columns that have percentages as a whole number and with a decimal format. I need assign a score value to the cell that contains a percentage depending on a range.
For example:
If cell A1 has a value between 97%-100% then A2 should display "15", however if A1 has a value of 90%-96% then it should display "12" and if A1 has a value of less than 89% then it should display "0".
if one of the guys, for example, John were to improve his score to a 369, I'd change the score in Excel, then use the sort feature to put him above Michael and Tim. Only problem is, it would say his place is still 4th place, and it doesn't change to 2nd place.
I want it so the "Place" column automatically changes to the correct rank based on the score the person has. So if I changed John's 355 score to 369 and hit sort by A-Z, Excel would automatically change the "Place" he's in appropriately so it would look like this:
I've written a Fantasy Football programme, which is 100% working, however I would like to have the highscoe table update automatically, rather than using the data/sort command. E-mail me and I'll sent it to you with what I'm trying to do.
i have three sheets in this workbook. i want to filter the the pupils with less than 20 marks in total at the end and copy it to the page named filter, from which i will go to the sheet1 which gives a remedial plan for ONLY those pupils who come in the filter page. this is all good but the problem is that when i update the Cont page, it wont update in the filter page.
I want to see if i can make a formula that works out how a player got a score based on a scoring system. See the attached file for more details. I want this to show that the player scored or didn't score, played a full match or was a substitute, was booked or wasn't booked and was sent off or wasn't sent off.
how can i make a worksheet/formula that automatically look for the equivalent score in a given transmutation table.
example: i have an exam of 10 items, what will be my formula to so that it will automatically look for the equivalent score under the transmutation table of 10 items
I need to write an excel function/macro/code to assign yes or no to a cell if the Description fits a certain category. I have attached a sample workbook and will explain what I mean.
In the sample workbook, there is data on a company. This included a unique ID, city, state, and description. What I want to do is fill out the yes/no column. So if a particular company has 2 of the 4 necessary "Descriptions", then column G will return yes, otherwise No. It must return yes for a particular company/ID if 2 of the "Descriptions" are "Sale", "Service", "Business", or "Par". I only want it to count at least two unique descriptions.
For example, in the sample workbook, Company A has all 4 of the necessary descriptions, thus everything in column G for this specific client should be yes. For Company B, only 1 of the 4 descriptions matches, so it returns No for all Company 2 columns. Company C has 2 of 4, so it returns yes for these columns. Note, it doesn't matter for Company C that "Business" was listed twice. It only needs to count the first unique time that description occurs.
I have one workbook with 3 Sheets (Table1/Table2/Table3). In Table 3 are the following columns "Table1" and "Table2". I need one script which search in table1 and table2 the words from test1 to test15 and write the assign numbers in table 3 in the right columns / row! If one value is not found, this value should have the number 0 in table 3.
I have the following examples attached, file Mappe1_Test1.xlsx is the before status and Mappe1_Test.xlsx should be the after status.
Sheet 2 contains a drop down list containing names, would like to assign a Macro to a button on same sheet that would refer to sheet 3 based on certain criteria.
Sheet 3 contains columns A - K of data. 2 criteria, data in column D and column K. Column D would be the same as names in the drop down list, whereas column K refers to a constant, either y or n.
Example: If D contains "Cheddar" and K contains "Y", copy and paste A:K to Sheet1, preferably starting at row 7.
I have a range of data on one worksheet that is pulled into a pivot table on another worksheet. Looking at the table below I would like to assign the values in the pivot table to a 1 if there is data. For example if any field is >0 I would like to assign it a 1. If not leave it blank. I tried using the formula function in the options tab but didn't have any luck.
I have an engineering spec table. Down 12 columns I have height in metres of a post and across the rows I have square metres with 5, 10, 15, 20 and 25 being the sizes.
The engineering spec of the post type is in the table. There are some duplication of post types so post heights of 1m, 2.1m, 2.4m, 2.7m, 3m, 3.3m and 3.6m are the same, then they change. Its a similar thing in the other column headers for 10sq.m 15sq.m etc.
I need a formula so that if the post height of 3m was chosen and the sq.metres was 15 then it would tell me the post type from the table. Or if the post height was 4.8m and sq.metres was 25 it would tell me.
The post type is an engineering code of numbers and letters with no spaces.
I am trying to create a worksheet where a user would enter a value (in example "Class"), then specify the "Wks of Safety Stock" required ("Wks of Safety Stock"). This would be dynamic in that every week the data would change based on the current week. Part of the issue is that most of the time the weeks of safety stock is fractional, expressed in decimal format (I've used 2.6 in the example). I know I can use index Match to get the starting point of my data, but what would be the best way to sum to the right the appropriate number of weeks?
im using spreadsheet works which seems to be very similar to excel. i am making a table full of numbers and i want to count how many times the number 1 appears and for that amount to be displayed.
i have a list of names in column A and a corresponding score for each name in column S. on a stats sheet B10:B15 was trying to make a top 5 list using =LARGE(Week1!S15:S46,1) ... with Large i am able to get my top 5 from the week1 sheet but how can i assign the corresponding top5 persons from column A15:A45 in week1 to the stats sheet in column A10:A15
I am currently working on a score sheet with list of question.
I have: On Sheet 1 (will be hidden later) List of 14 questions (e.g. question 1 = 6 possible answers, for answer 1 is score -2, for answer 2 is score 7... etc). In column C are possible answers, in column D are the score values.
On Sheet 2 (will be visible for participants) Drop-down list based on Sheet 1 questions (Sheet 1; Column C) I have set Cell link for each question so when you choose the 3rd answer, there is number 3, but I need to set different values based on Sheet 1, could be that 3rd answer is score 12. I do not know which function to use (I tried IF, but to me it seems too long and difficoult).
I've seen a few bowling formulas within mr. excel but nothing in code. so i tried it and the only problem i have is when a player strikes.....then the code should add the next two balls thrown..... it works if the next two are strikes but not if there is no 'mark'. So basically its not adding the second ball. The code looks right unless I'm just missing something. heres the code....
I'm trying to find a suitable formula that looks at two cells (J3 and V3) in Sheet 1 (a person's employment grade (e.g. 18) and their performance percentage e.g. 92.5%), finds those values in a table on Sheet 2 and then places the corresponding value from that table in Sheet 1 at cell Z3.
I'm working on a spreadsheet to anticipate the corrosion rates on multiple equipments, based on 4 criterias. At the moment, we type them down one by one and we search for the corresponding value inside the table we have.
These values aren't the real ones, but it looks like that. So, if I have a piece of equipment made of CS, I look at the specific table for CS (There are about 7 different groups of materials). I consider the %Sulfur, TAN# and the specific temperature. You also have to consider that this table is repeated with different outputs for higher level of %sulfur (>0.6, up to about 3%)
EX - Material = CS, %Sulfur = 0.4, TAN# = 0.7, Temp = 152, my value will be 9 (the bold numbers are the outputs). There is no linear relation or any sort of mathematical way to obtain the output, you have to look at the table.
In my mind, this part of my spreadsheet should look just like that :
Material %Sulfur TAN# Temperature CORR RATE
W X Y Z = Output
The excel part now, I tried working with IF() to specify a table to use as the TRUE value, trying to group multiple IF statement into one, but searching values inside multiple ranges is very tedious and I cannot cover all the possibilities... Then I tried working with INDEX() and MATCH() but again, these are not exact values, they are ranges, making the work even harder. Building an output with multiple criterias that are simple and exact is easy, I just can't seem to work it out with ranges.
This is probably so simple for an Excel wiz, but I've drawn a blank. I have a 2-axis table, with the formula =DCOUNTA(Data,"Function",B15:C16) in the top left intersect cell. Data range is the table of info, which has location and function column. Location has values UK and Ukraine.............yes, you've guessed it, the UK row of the table returns both UK and Ukraine numbers. The criteria range B15:c16 has Function and Location as headings and blanks underneath. The data table references B16 and c16 as the row and column variables. How can you modify the criteria or table formula not to use starting-with criteria but exact matches ? (probably have to use another formula besides an array version of dcounta, right ?)
I have a 5 column LIST that will have new rows added daily. Column A= Date (mm/dd/yy), B=id (s or u), C= ArriveTime (hh:mm), D=DepartTime (hh:mm). E is Delay time (D-C). Arrival and Departure times will vary from 5 AM - 9 PM but will always be on the same day. I would like a count of all s with delay of 0-6 min, 7-12 min, 13-18 min, 19-24 min and 25+ minutes. Also count all u with same delays. I should get 10 results (1 of each) using the following data. Would also like the mean, median, mode, min & max for all C (Arrival), D (Depart) and E (Delay) times.
1/1/08 s 08:00 08:01 1 1/1/08 s 08:00 08:07 7 1/1/08 s 08:00 08:13 13 1/1/08 s 08:00 08:19 19 1/1/08 s 08:00 08:25 25 1/1/08 u 08:30 08:31 1 1/1/08 u 08:30 08:37 7 1/1/08 u 08:30 08:43 13 1/1/08 u 08:30 08:49 19 1/1/08 u 08:30 08:55 25
I am using data validation for a drop down list e.g Good, Average, None. What i want is when a user selects for example "Good" i need a score to be automatically entered into another cell so that i can then do some calculations.
I have one excel file with three sheets marked 1,2 & 4
Sheet 1. is the place we add the description and the member number. When a member number is entered it gets the member name from sheet 4.
Sheet 2 is the page I need to change. Currently we can enter any score number in each box between 1 to 5. If we try to enter other numbers we get an error message.
I need to change the form so we can enter 1 to 10. Any other number needs to generate the error message.
Should be an easy fix for experts, but I'm not one of those...
I'm trying to create a "scoresheet" in Excel where a racer has a name and an ID number on the main tally worksheet, with columns relating to their scores for each race. Subsequent worksheets have results from each race (one race per sheet), with the individual referenced by their ID number.
How do I have the main tally sheet "find" that person's score for each event in separate columns so that it can add up their totals? I tried an IF formula to find each score in the subsequent sheets, but that didn't work.
Is there a simple formula to do this? I've been achieving the results by importing the worksheets into a Filemaker database (where the ID number "matches" and updates each score), but that's a pain, and I'd rather do it all in Excel.
I am getting the correct answer for the first one only...all others are coming back incorrect. I have been working on this one problem for over 3 hours.
