Golf Score Board
Aug 7, 2009
I am organizing a golf scoreboard for my golf tournaments. Basically, this is what I want to do:
I would like to rank the players that are entered by their score, in ascending order. Basically, I want to take the column for "total strokes" and organize the numbers so that it will rank the numbers that are entered. If there are no numbers entered in a specific row, I don't want that "zero" to be ranked in the list. So for example, if I have five golfers but they are spread out over 10 rows, I would still need to have five numbers in the rank: 1,2,3,4, and 5, not 1 to 10, as if it were ranking the rows that have nothing entered in them.
This is how it will look:
Johnson - Strokes : 70 - Rank :1
Williams - Strokes : 75 - Rank : 3
Patterson - Strokes : 72 - Rank : 2
View 9 Replies
ADVERTISEMENT
Jan 31, 2014
I run a golf society and need to set up a golf aggregate sheet that will allow me to enter the players weekly scores and the sheet will then look for the lowest score entered for each player and replace it with their score of this week.
View 13 Replies
View Related
May 25, 2008
I am using Excel 2002 in Xp and also want to use the spreadsheet on my Pocket PC using Pocket Excel.
I have a column of 10 numbers with rows 1,3,5,7 & 9 representing the individual gross scores of the 5 team members. Rows 2,4,6,8 & 10 have either a 0 or -1 (calculated) in them representing the strokes (or discount) the player receives for that hole. So the net scores for each player will be row 1 + row 2 and so on.
I need a formula that will calculate the total of the 2 lowest net scores and 1 low gross score with the score for each player only being used once which will then represent the team score for that hole.
A sample column would have 4,0,3,0,4,0,3,0,5,-1 in it.
View 9 Replies
View Related
Jun 10, 2006
Golfers have a numeric handicap based upon their proven ability (reported scores); the lower the handicap, the better the golfer.
My golf group is randomly drawn into handicap-balanced foursomes. If 24 guys are playing, six teams are created as follows:
1) The six players with the lowest golf handicaps are "Captains," and are randomly drawn.
2) After the Captains are drawn, the six players with the next lowest handicaps are then randomly drawn as the #2 players for each team.
3) The same process is followed to randomly determine the #3 player and #4 player for each team.
If the number of players is not divisible by four, some threesomes are then created, and one, two or three players are then on two teams. e.g., If we have 29 players, we draw 5 foursomes (20 players) and 3 threesomes (9 players). In this event, each threesome will use the scores of a randomly drawn player (Ghost) from one of the five foursomes.
(Each Threesome's "Ghost" player should be drawn from the group [captains, #2's, #3's, #4's] which will best round-out and handicap-balance the team.)
View 9 Replies
View Related
Oct 4, 2007
I am working on a cricket score board in Mircorsoft Excel. This is my first question. When I solve this, I will go ahead.
In the sport of cricket, an over is a set of six consecutive balls bowled in succession. An over is normally bowled by a single bowler.
An over is made up of six balls, each ball counts for 1/6 of an over for the purposes of calculating the net run rate, despite being normally written in cricket's notation as .1 of an over. if a bowler balls 6 consecutive balls. it is called an over and writting in cricket's notation as 1 over.
My question is that Team A played their two matches. In first match, Team A played 47.4 overs and in second match Team A played 49.5 overs. The total number of overs in two matches Team A Played 47.4 + 49.5 = 96.9. But in cricket sport we will sum up it like this 47.4 + 49.5 = 97.3. I mean that Team A played 47 overs and 4 balls in their first match and in the second match they played 49 overs and 5 balls.
How can I sum up it in Excel Worksheet?
View 9 Replies
View Related
Aug 10, 2009
I want to see if i can make a formula that works out how a player got a score based on a scoring system. See the attached file for more details. I want this to show that the player scored or didn't score, played a full match or was a substitute, was booked or wasn't booked and was sent off or wasn't sent off.
View 5 Replies
View Related
Oct 8, 2011
How do i share parts of my spreadsheet on the board?
View 1 Replies
View Related
Nov 5, 2007
I run the company office pool / lottery. A person selects 6 numbers 1-49. Twice a week the provincial draw is held. if your number matches the drawn number i would highlight your number on the spreadsheet. When all of your numbers are highlighted, you win. This usually takes 3-4 draws to cover all your numbers. Ideally i would like to simply enter the drawn numbers & have excel automatically highlight the number next to each persons name if they have selected that number.
View 9 Replies
View Related
Jul 15, 2007
I would like to create a new more effective quick staffing board for work.
Name Start Time Finish Time Break Allowance Break Time 8 (then time period from 6 till 2300
BUT when I enter say a shift of say 09:00 17:00 I need this time period to block out on the board, hard to explain ...
View 14 Replies
View Related
Dec 17, 2013
I am trying to create a simple dash board using only Excel and no VBA. What I am trying to do is I want to create dependent drop downs and link up drops downs that will pull out the required data individually or with combination of those two. For example, let's say
A column has Dates of transaction,
B column has Item name
C column has Units
D column has Month name
E column has Shifts (Morning or Evening)
I am trying to make a dash board that will pull total Sum of individual items based on
Only Date wise
Datewise + shift wise
Month wise
monthwise + shift wise
I managed to create drop down list for dates, months, and shifts but i dont know the way how to link the individual drop down lists together to pull the data based on the selection. which function i should use here and how?
View 5 Replies
View Related
Jun 3, 2007
i would like to write vba to fill a "chess Board" Matrix (8X8) With Powers Of 2...
starting with 2^0 and ending with 2^63...
(i suppose, click a button/icon and have the numbers fill in/populate...)
View 2 Replies
View Related
Dec 24, 2013
I am trying to create a form in excel that simulates a chess board, the code was quite extensive so I better separate it into modules, because the program suddenly began to close, how do I do that? being that I have all the pieces of a chess game and some strings and boolean variables with information on the positions of the pieces on the form?
VB:
Private Sub A1_Click()
If Turn_Player1 = True Then
If Active = "Pawn_pr1" Then
If Loc_Pawn_pr1 = "A2" Then
[Code] .....
View 1 Replies
View Related
Jun 3, 2013
I am looking to copy a simple board game in Excel
Basically it would be a simple race. Containing 4 counters (blue, green, red and Yellow) and 10 squares each.
There would be 40 cards 10 blue, 10 green, 10 red and 10 yellow. Cards would be draw randomly and the counters move respectively. I would be thinking about starting with =RANDBETWEEN(1,10).
I have no knowledge of VBA/ macro but would welcome ideas with what formulas/ commands to use.
I have added some snapshots to show what I would be looking for.
[URL]
View 4 Replies
View Related
Aug 25, 2013
I'm making a custom BINGO board in Excel 2010 for a family reunion, so it doesn't contain numbers; instead it has words (like "has brown eyes" or "served in the military"). the first sheet is the board and looks like a traditional BINGO board with the same number rows and columns with a center FREE space. On the second sheet is the list of all the phrases I'm going to use, one phrase per cell, all in Column A.
In BINGO cells, I want it to use one item (phrase) in each box but NOT repeat within the board. I have the following code in each cell and it works EXCEPT, there is no code telling it to make each cell unique, so sometimes it may repeat.
=UPPER(INDEX(ColumnA,((RAND()*(Data!A1-1))+1),0))
View 8 Replies
View Related
Jun 4, 2009
i use it to arrange players for every hole during golf tournaments. The present sheet (that i have attached) will allow as few as 2 players per hole. i have been informed that it should not assign less than 3 players per hole. the math in the code needs to be adjusted so that it knows to always start with 3 somes and work up from there. i can do the math on a sheet of paper i just don't know how to code the math . the attached sheet is what a member on the forum previously did for me. i take no credit for it, i am not capable doing what this sheet does for me.
View 4 Replies
View Related
Feb 6, 2009
Not sure if this is do-able but I figured I would try. For a golf league coming up later this year I want to figure out how many Birdies, Pars, Bogies, Dbl. Bogies and Others each (20) golfers have during the season. After each round I would input their scores and I am looking for a program that would look at the score of the hole and the par for the hole and figure out what they got 1 under par = birdie, even par = par, 1 over = bogie, 2 over = dbl bogie and 3 over = other.
I started by creating a simple if statement but it ran out too long and my other issue is adding up the number of birdies, pars..etc for each round. Meaning a golfer can have bogies on hole #1 and #2 and the if statement can take care of that but how would get a total saying the golfer had 2 bogies.
Something like this with the - meaning a column.
birdies Pars bogies dbl bogies others total holes
4 - 5 - 3 - 4 - 4 - 5 - 6 - 5 - 8 1 4 2 1 1 9
I would do this each week and total the number of each to keep a running total at the bottom of each column. We play on the same course each week so the pars for each hole can be hard coded.
View 9 Replies
View Related
Apr 21, 2009
I run a spreadsheet that manages golf tournaments. i have to group
the # of players evenly as possible on each hole once they are entered into the tournament. since the number of players varies from tournament to tournament the math gets complicated trying to get the groupings right. i can do the math on paper but do not know how to code the math in a macro. this would save me a ton of time if someone can figure this out. i have attached a sample .xls that includes all the info i could think of a person needs to see what is going on. If i am asking to much i understand and will remove the thread.
View 6 Replies
View Related
Feb 15, 2008
I am trying to compute the handicap for a golf group. We base our handicaps on the lowest 4 of your most recent 5 rounds. I have no problem selecting the 4 lowest of 5 using the SMALL function. My problem is have the formula select only the most recent 5 rounds. Because everyone doesn't play every day the five most recent scores might be over several weeks and the others might be in the last week.
I am only entering the adjusted score (not hole by hole). The header columns have the date played.
The formula currently shows =SUM(SMALL($F9:$J9,{1,2,3,4}))/4.
View 9 Replies
View Related
Jul 5, 2008
I have been putting together workbook for my golf analysis.
Against each hole (1-18) I enter in one row which club I used from the tee which could be any of the following: D,3w,5w,1,2,3,4,5,6,7,8,9,w,s.
I also have a row that says whether I have hit the fiarway or not. If hit fairway = 1 if missed = 0.
What I want to be able to do is show the % of times I hit the fairway with each club. This would seem ida for the if function but I'm not quite sure how it would work because the result row is going to need to look at every hole to see if the club used was d,5w,3 etc etc and 'if' so then it will need to look at the row which says 'hit fairway or not' i.e. 1 or 0. This is where I get lost and am not sure if I do need the 'if' function or something else? Perhaps I need additional rows?
View 9 Replies
View Related
Oct 7, 2006
I couldn't find a solution to where I'm at now, but Derks formula...
= SUMIF($J$5:$J$44,J5,$K$5:$K$44)/COUNTIF($J$5:$J$44,J5)
from...
excel formula
...Almost gets what I need, but my data will not always be in a high/low descending order. I'm braindead; I can't think of how to make this formula work.
View 9 Replies
View Related
Mar 14, 2008
I am creating a workbook to manage golfer scores, teams, winnings, handicap, ect. I am having trouble with the statistics sheet. I Need A Sub To:
1. Column "B" , take the average of the lowest 5 numbers in columns "AB" though "AU"
2. Column "C" , take the average of the lowest 10 numbers in columns "G" through "Z" divided by 0.96
3. Column "D" , take the average of the lowest 10 numbers in columns "AW" through "BP"
this needs to happen for each row where there is a name. (names added daily)
I have included a similar sheet as the one i am working with along with some command buttons typically not included. Should show some of the problems I am having.
View 5 Replies
View Related
Dec 30, 2013
I am building a golf spread sheet with page 1 being where I will input scores, also on this page I have a drop down list with the 9 golf course names. What I have done is I have added 9 sheets with the names of each golf course, on this sheet I have added the scorecard. So what i am wanting to do is, on sheet 1 use a drop list with the name of the course, then choose what tees we are using and let it populate on sheet1 hole 1 thru 18, with the yardage and par for the hole.
View 4 Replies
View Related
Mar 18, 2007
Just starting to use excel and have a problem I hope someone can solve. Trying to set up handicap system for golf league. Column A is players. Column B shows average of last 5 rounds played and rounded to nearest whole number. column C shows the same without rounding. column D and beyond show scores with column D being the most recent. Have this all this working well with one problem. Each week I insert new column D, enter scores, and everything is recalculated. How do I deal with absent players? Is there a way to enter perhaps "A" for absent and excel will know to count the last 5 cells with numerical values only?
View 14 Replies
View Related
Jan 15, 2006
I would like to set up a Excel spreadsheet for golf handicaps where it will use the 4 lowest scores of the last 5 entries. It must be able to work even if there are missed entries (someone didn't show up/blanks ignored). I would like it to work if there are only three scores used at the beginning of the season, but when there are 5 or more scores, use only the 4 lowest scores out of the last 5. I want it to average these scores. The scores would start in column d. The following is an example of scores with an underscore being a blank:
Golfer 1 45,50,42,43,46,37,45,45,46,44
Golfer 2 41,43,42,_,41,_,_,47,42,39
Golfer 3 44,43,45,54,_,45,43,40,42,_
View 9 Replies
View Related
Jul 15, 2006
If the number in one cell is larger than the number in another cell then i would need a 2 added to yet another cell.
I the first two cells are equal then I would need to add a 1 to that 3rd cell.
View 3 Replies
View Related
Apr 21, 2014
organising a golf tour for 32 players.playing in teams of 4 (4 Balls) for 4 games of golf and the teams are to be randomly selected such that no player plays in a group with a person he has played with in a previous game. finding it difficult to create a spreadsheet which meets this criteria.
need to build into the spreadsheet the fact that the variable mix of people is constrained by the fact that at least 4 persons have to use a buggy (which will have 2 people in it) and as the tour progresses and courses become physically demanding a number of people (N) for the last 2 rounds may also ask for the use of buggies as well.develop a spreadsheet to make the 4 Ball team selections.
View 2 Replies
View Related
Jul 28, 2014
I am attempting to put together a golf tournament spreadsheet. I have figured out how to review a list of numbers, find the lowest ten scores and make a list of those scores. Next to that I want to have excel input the name of the player that shot that score. The problem is, a couple of scores match so excel is only returning one of the golfers names. I am trying to have it return the other golfer who scored the same score.
Here is the formula I am using in Column N:
=SMALL($L$2:$L$21,1) This runs from 1 thru 10 for the 10 lowest scores.
Here is the formula I am using in Column O:
=INDEX($A$2:$A$21,MATCH(1,INDEX(($L$2:$L$21=$N2)*ISNA(MATCH($A$2:$A$21,N$2:N2,0)),0),0))
Here is the formula I am using in Column P: (gives same info as column O formula)
=INDEX($A$2:$A$21,MATCH(SMALL($L$2:$L$21,ROW(N1)),$L$2:$L$21,0))
Column A = golfers names
Column L = list of all golfers scores
Column N = lowest ten scores in order
Spreadsheet Attached : Golf Excel Score.xls
View 11 Replies
View Related
Apr 25, 2013
I am trying to create a golf table that shows how many games are played how many points are given for 1st 2nd 3rd and so on we give 10 pts for 9 for 2nd and so on......
View 12 Replies
View Related
Jul 28, 2014
I am attempting to put together a golf tournament spreadsheet. I have figured out how to review a list of numbers, find the lowest ten scores and make a list of those scores. Next to that I want to have excel input the name of the player that shot that score. The problem is, a couple of scores match so excel is only returning one of the golfers names. I am trying to have it return the other golfer who scored the same score.
Here is the formula I am using in Column N:
=SMALL($L$2:$L$21,1) This runs from 1 thru 10 for the 10 lowest scores.
Here is the formula I am using in Column O:
=INDEX($A$2:$A$21,MATCH(1,INDEX(($L$2:$L$21=$N2)*ISNA(MATCH($A$2:$A$21,N$2:N2,0)),0),0))
Here is the formula I am using in Column P: (gives same info as column O formula)
=INDEX($A$2:$A$21,MATCH(SMALL($L$2:$L$21,ROW(N1)),$L$2:$L$21,0))
Column A = golfers names
Column L = list of all golfers scores
Column N = lowest ten scores in order
View 4 Replies
View Related
Apr 1, 2008
I need a formula to figure the 5 lowest of last 6 sores, since everyone doesn't play every week there would be blank spaces and it needs to just give me the average if they have less than 6 scores!
I have manipulated the formulas until I am blue in the face and cannot get it to work;
View 9 Replies
View Related
