Average in Cell J8 : J73
Handicap in Cell I8 : I73
What Im trying to achieve is the Lowest Average Plus handicap 1 = total
Example
Cell
J8 = 105
J9 = 169
J10 = 126
J11 = 155
Cell
I8 = 45
I9 = 35
I10 = 54
I11 = 21
Result 105 + 45 =150 1 = 149
I'm currently using the following formula to return values rounded down to the nearest 2.5: =FLOOR(X8*1.25,2.5)
This works fine but I would like to put in place a system where if the "X8" value is 1 the formula produces a 2.5, and if the "X8" value is 10 or greater the formula produces a 10.
Attached is a print screen. I'm struggling with using the min function in vba. I want it to find the minimum cumulative cost in week 0 out of the first three, and the copy the permutations of it (1,0 or 1, 1 , e.t.c.) to Week one column C & D of the model.
View 3 Replies View RelatedI have a load of (multiply duplicated) categories (in col G) and values for them (in col P). Each category has more than one value, but they should be in roughly the same ball-park. I want to rank the categories in a pivot table, by value, not alphabetically. So I wrote this formula:
{=MAX(P$2:P$10*(J$2:J$10=2)*(G$2:G$10=G2))}
(I also am only interested in entries for which there is a "2" in column J as shown)
This takes the category, finds all instances of the same category in col G and returns the max of all of them - so each row now has a "max value for this category" field.
This is all great, but what would work a lot better would be grouping them by the minimum value in the column, but of course when I do this I get a zero (from any one of the hundreds of non-matches).
I tend to get non-zero mins using small and countif but can't conceive how I would squeeze that into this formula.
Looking for a formula that can account for a minimum value.
The calculation is as follows 1.22*(x)+8=(y)
(y) must be greater than or equal to 20.
I have a range of weekly sub totals that get entered each week for the year.
o8:bn8
As each week are entered I am trying to find the lowest week's production (using the =min formula) that is above 0 (weeks not yet entered appear as 0) the problem is that it keeps defaulting to the next column once a number greater than o is entered.
Is there a simple way to find the min and max value for my formula below
HTML =SUMPRODUCT((Data!$J$2:$J$10000="E700")*(Data!$M$2:$M$10000>'Rental Rates'!$A3)*(Data!$M$2:$M$10000<'Rental Rates'!$B3)*(Data!$M$2:$M$10000))
I have the following formula C= day in DD/MM/YYYY and D = Time in HH:MM format and BJ5 is the date
View 3 Replies View RelatedI have this formula in E19: ...
View 9 Replies View RelatedActually with the help of array formula I"m taking out Average, Min, Max value of ranges and I was omitting zero but the problem is occurring that if i have originally zero in my ranges then Average & Minimum function is not working properly.
View 8 Replies View RelatedWhat is the syntax for the formula for the minimum number, greater than zero, in a series of numbers.
I have a row of numbers, including some zeros, but I want the minimum number excluding the zeros.
I need a formula to give me a MIN or MAX value only if there is a number greater than 0 in the cell AND not alphabetical letters (as some cells do contain). I need it to return the value for that cell across about ten sheets--I have that part figured out (I think). But I keep getting a #Ref error.
View 9 Replies View RelatedI want in A1 to find minimum SUM if no minimum number in row.
Here is example attached: ...
I have had a lot of luck finding what I need from the search areas, and I even found some information on the formula I am trying to build. The problem is I don't understand it and I need some help. First let me set it up for you. (I do not know the formula)
If cell L125 is has a value >0.00, I need to locate the smallest value the range of cells C125:F125, I then need to subtract L125 from that number, otherwise enter nothing.
This really has me baffled. I tried and I tried but it will not find the smallest value then subtract L125.
I need a formula that will return the minimum value from a column range that flexs without having to manually go in an change row references. There is a blank row between each section of data in order to separate info. As an example:....
Need to formula to flex to include rows 5 thru 7 in the first section but expand to include rows 9 thru 13 in the second section. =MIN(A5.A7) works but how do I get next section to flex to =MIN(A9.A13) without manually changing the cell references? There is always a blank row in between the sections to separate.
I have a spreadsheet that contains a list of dates: What I need is a formula that will count the number of cells that hava a date more than 6 months old. I also would like the field automated so I don't have to change the date manually every day.
=COUNTIF(S5:S593,"<2012/06/18") This formula will give the correct read out, but I must change the date manually.
My attempts at adding a =today() command in place of the date result in 0 being the result (not correct)
This is what I have tried: =COUNTIF(S5:S593,"<"=TODAY()-"183")
My problem is that I want to select a cell with a "Sum" formula ex.
View 5 Replies View Relatedhere is my formula
=SUMPRODUCT((MONTH($A$10:$A$624)=1)*($C$10:$C$624="DO"))
I want to add this:
($C$10:$C$624="DO")) AND: "SD" AND "V"
how would i add these other two factors?
I need a formula to know the total specially for each of the numbers in column A. Like for e.g when you see 1 in column A I need to to know the total by adding all the numbers just for 1 in column B. So the total for 1 in this sheet would be 10+85+5=100. So automatically the answer should come as 100.
View 11 Replies View RelatedMy formula is : =SUM(C8:N8). How do I add a "note" as opposed to a comment to this formula?
View 3 Replies View RelatedI have a number of cells, with a rule as follows, but within each cell the company name and month vary, over 836 cells, so I cannot do a find and replace so wanted to know if there was a way of adding the following part to the rest of the formula within the 836 cells in one go, rather than tediously going through each cell and copying/pasting.
The part I would like to add to the various cells - 'Master Quote Sheet'!$H$18:$H$6021, "Won"
Existing formula (the varying parts within the different cells are the "02.2014" and "Company Name"
=SUMIFS('Master Quote Sheet'!$J$18:$J$6021, 'Master Quote Sheet'!$E$18:$E$6021, "Direct", 'Master Quote Sheet'!$A$18:$A$6021, ".02.2014", 'Master Quote Sheet'!$D$18:$D$6021, "Company Name")
I am desperately trying to add a simple subtotal formula but receive the same error ("Type mismatch"):
View 4 Replies View RelatedI need a code that looks through Column A (account numbers) then adds up the profit from Column X for each account number. The total profit for each account is then sent to different sheets. Account 100 profit sent to Sheet S1, Account 200 profit to Sheet S2, and so on
.The profit figure will go to Column C (Sheets S1,S2,S3..), in the next empty cell.
I have a code here that works, but problem is it places a formula in the cells in the output sheets. I dont want any formula there, just the value that is calculated. This is because everyday there will be new values in the 'Summary' sheet, and if the macro inserts the same formula everyday I data(profit figure) from the previous day gets distorted.
I am trying to insert a formula into a VBA Code but I get an error msg.
The formula is;
Currently have a formula to enter the last value in a row in cell B1. What i need is the formula below in B1 then a formula in A1 which will show the value before the last entry in row 1. Maybe an offset unless there is an easier way
=INDEX(1:1,MAX(IF(D1:Z10,COLUMN(D1:Z))))
i.e.If H1 was the last entry in the row I want a formula for H1 in cell B1 and a formula for G1 in A1
I have the following code which works plus a formula in cell range G5:G123....how do i add the the formula to the VBA code
Formula =IF(F5"".F5< today () +3 )
I'm making a basic spreadsheet that has to calculate monthly due dates for 'reviews' based on an initial start date.
im using:
=DATE(YEAR(A1),MONTH(A1)+1,DAY(A1))
.... i know thats probably dead simple to you guys!
which works fine.. except when it comes to times when the start date is for example 31 january, so the sequence goes:
31 jan....... 03 March.... 31 march
and my problem is i need 1 review in each calendar month, so i need to tell that 03 March to be 28 Feb instead.
Here is my current formula:
=IF(ISERROR(INDEX(Sheet3!$D$5:$D$200,MATCH(E5,IF(Sheet3!$C$5:$C$200=C5,Sheet3!$A$5:$A$200),0))),"0",INDEX(Sheet3!$D$5:$D$200,MATCH(E5,IF(Sheet3!$C$5:$C$200=C5,Sheet3!$A$5:$A$200),0)))
I would like to add one more item to match. I need to match column H in my current sheet, to that of column E in sheet 3. Just not sure how to go about it.
Is it possible to have in cell A1 "Sales Reviewed Weekending" and then the formula =TODAY()-WEEKDAY(TODAY())+1) all together?
View 9 Replies View RelatedField 1 shows as MON 02/06/08 on sheet 1
I would like it so that Field 1 shows TUES 03/06/08 on sheet 2 and so on for every sheet for the remainder of the month.
I would also like it if I could just edit the first sheet then hit print 31 copies and have it count up each for each sheet that is printed.
Or another alternative is to change sheet 1 and have every sheet after that change in succession and then just print the entire workbook.