Field 1 shows as MON 02/06/08 on sheet 1
I would like it so that Field 1 shows TUES 03/06/08 on sheet 2 and so on for every sheet for the remainder of the month.
I would also like it if I could just edit the first sheet then hit print 31 copies and have it count up each for each sheet that is printed.
Or another alternative is to change sheet 1 and have every sheet after that change in succession and then just print the entire workbook.
I am looking for a formula that looks at a date and could add business days to it.
for example:
If the date in a field is Monday, 15-dec-08 and my formula is to add 5 Business days (mon-fri) to it not including that date. The desired result would be Monday, 22-dec-08 but my formula gives me 20-dec-08
I have an Excel workbook with two sheets "DataSheet" and "Actual Peaks", "DataSheet" contains a column with dates and a column with values. "Actual Peaks" has a bunch of dates listed in a column. For each date in 'Actual Peaks', another column goes back to the "DataSheet" finds the date, then starts adding values until a specified sum is reached, once the sum is reached, it returns the date at which the sum was reached. However, I have found that sometimes it is off by a day or two.
See the attached workbook for a much clearer example : Excel_forum help 7-23-14 DD validation.xlsx
I need an IF formula, that states if a date is more than a month after the date in the cell then it is timely and if it isn't then it is not timely. For example the date in A1 is 12/11/05, if the cell is A2 is 13/12/05 (or any date after that) then A3 should read Not Timely, if A2 is 12/12/05 (or any date before that, including a date before the date in A1) then A3 should read Timely. Is there any way to do this?? At the moment I am having to go through manually and put in either Timely or Not Timely.
View 2 Replies View RelatedIs there a wat to have the date refresh itself in a cell when you open the spreadsheet?
View 3 Replies View RelatedI have the following formula in a cell
=LOOKUP(WEEKDAY(A1),D2:D8,C2:C8)&A1
that I want to look up the Day (mon, tue, etc) and then return the date entered in cell A1
So if the date in cell A1 is 01/05/08, the formula should return Thu01/05/08.
Currently it returns Thu39569, even though the cell is formatted as a date format... How do I get it to return the date in a date format?
I have this sample excel ,and I would like to add each value on the 6th row under the date .But I would like to add values under the same date .
View 6 Replies View RelatedI want to put a date in one cell then in the next cell i want it to add 60 days automatically, so to give the new date.
View 4 Replies View RelatedI have a spreadsheet that contains a list of dates: What I need is a formula that will count the number of cells that hava a date more than 6 months old. I also would like the field automated so I don't have to change the date manually every day.
=COUNTIF(S5:S593,"<2012/06/18") This formula will give the correct read out, but I must change the date manually.
My attempts at adding a =today() command in place of the date result in 0 being the result (not correct)
This is what I have tried: =COUNTIF(S5:S593,"<"=TODAY()-"183")
I have a date on the top left hand corner of my excel sheet. I want to add exactly one month to that date in a vertical list (without using micros)
Example:
1/4/2005
1/5/2005
1/6/2005
1/7/2005
1/8/2005
.
.
etc
PS: I tried adding 30 (or a similar number like 29). It works but not if I want a large list of dates, which is what I want.
help.jpg
I'm new to VB. I am writing a code to insert a value in to the textbox depending on the focus.
For example if i have kept the focus on textbox1 and I click the particular date on calendar, then it should print the date on textbox1 and vice versa.
i have a macro that richard buttrey has so kindly helped with
View 14 Replies View RelatedBasically it's to make my content management easier.
I have made a button and assigned a macro to it. At the moment the button creates a new column and makes it the right size etc.
From an outside source, a date is brought into one cell, and time is brought into another. Is there a way to combine them into one cell with the format of m/d/yyyy h:mm?
I tried concatenate, but that did not work.
I have a worksheet where in column B I have a vendor name, column E I have a date value and in column AF I need to calculate a due date based on 7 working days for vendor A and 14 days (not working days) for vendor B. I've tried to write an IF statement but can't do it. Can anyone suggest the right combination of IF/AND statements that would do this? I attach the workbook should my useless attempt at explaining my problem be unclear...
View 3 Replies View RelatedI've tried a number of examples but I can't seem to get it to work. the desired results in column C.
10/17/11 12:00 PM10/17/11 1:00 PM1:0010/17/11 12:00 PM10/17/11 9:00 AM(3:00)10/17/11 12:00 PM10/16/11 9:00 AM(27:00)
I am looking to add a date picker to sheet where I am tracking dates like having a month calendar drop down.
View 9 Replies View RelatedI have a date stored in a variable and I need to add month(s) to that date. For example if I have 10/1/2013 in a variable if I add 1 to that month the result should be 11/1/2013. I am using the following formula but the problem is in the result date format, which shows as 1/31/1990, if I add 2 to the original date, the result is 2/29/1900 which ideally should have been 12/1/2013.
My formula is :
ActiveCell.Value = "=date(year(" & last_date & "),month(" & last_date & ")+" & i & ",min(day(" & last_date & "),day(date(year(" & last_date & "),month(" & last_date & ")+" & i & "+1,0))))"
Any other formula to add months to a given date?
Is there a way to add # of months to a date and then find out what would be the exact date?
For example if cell A1 = 04/30/07 and Cell B1 = 14 what is the statement that would give me 06/30/08 in Cell C1?
Also, how can I modify the statement if Cell B1 = 14.5 to get 07/15/08?
I'm trying to come up with a formula which will add the cells in a date range. This date range may be within the same month or span several months but will always be within the year.
On the results page, Cell A3 will be the Employee Number, Cell B3 will be the From Date, Cell C3 will be the To Date. I need to find a for cell D3, the sum. For example, if A3 had 123456, B3 had 1/2/09, C3 had 1/3/09, then D3 would need to have 17.48 (8.88+8.6)
The way I'm currently looking at is adding a row between C and D on the data table below which contains the row number, then doing a VLOOKUP and a few indexes to pull the data but I'm concerned that pulling data from 7 different tables (for different types of employee hours) for 250 employees would make this take forever to recalculate.
Note that the table below has 12 rows for the 12 months of the years and the columns go all the way to 31. It can be counted on that if a date doesn't exist (for example, 2/30/09, the value in the cell will be 0 which means we can use ranges through the end of the month if needed) ......
I have a problem concatenating time in excel if it is of Date + Time format..
What formula do I use to just add the time by, say, 3 hours? I'll need to use, say cell B2, which will add 3 hours to it.. What formula do I use?
See the attachment. When the macro runs. The workbook is saved in a folder with a new serial number. That is fine but I need to debugging the code. Since I need to save the WB name with the time and date to be also picked and named when saving. Refer to cell B1.
View 9 Replies View RelatedI have a cell E1 that is actually a vlookup and returns a date. I had to custom format the cell so the value returned looks like "June 2007" instead of "39827". I am running a macro and I need a messagebox to tell the user that they are creating an email for June 2007 (which is really the variable cell E1). Problem is the message gives the date as '6/4/2007' instead of 'June 2007'. I tried using the text() function to format the cell as "mmmm yyyy" but I get a type mismatch error. Below is the code I wrote. The first way shows successful but the date as numeric. The second gives me the type mismatch error: First way:
a = Range("e1").Value
Msg3 = "You are about to create an email for " & a & ". Are you sure?" 'Define msg
Style = vbYesNo + vbQuestion + vbDefaultButton2 ' Define buttons.
Title3 = "Create new file" ' Define title.
Response3 = MsgBox(Msg3, Style, Title3)
If Response3 = vbYes Then ' User chose Yes.
'create email
Second way (mismatch error): a = text(Range("e1").Value, "mmmm yyyy") Msg3 = "You are about to create an email for " & a & ". Are you sure?" ' Define message.
Style = vbYesNo + vbQuestion + vbDefaultButton2 ' Define buttons.
Title3 = "Create new file" ' Define title.
I am trying to record the date with time on a pre set cell of a row, in which the cell will show the most current updated date/time once any change is made within the same row, regardless which cell on the row. Is there any code for VBA you can suggest?
View 14 Replies View RelatedThree columns.
A - Date last checked
B - Due Date
C - Actual Date checked
Currently column B simply has =A+84 and will display a date 3 months in future.. Great..
However now i want column B to still display the 3 month date - unless there is a date in C, whereby i want B to then display OK. SO what im sort of needing is =A+84 (or if somethings in C then "OK")
I have a date in A2 7th Nov 2011
Column B is number weeks until next appointment - 4.
Column C is the answer Friday 2nd December if the normal result is a Saturday or Sunday then use Friday.
I've done this before but can't remember how I did it:
1BCDEFGH21234533red92701131096601005096604green20070582305250044940472805
blue0355203912033930389706bpink51059230632205352061280789-In column H,
I want to sum only rows that are less than or equal to cell H2.....
How to add current date till the end of the column until data exists.
i used
With Range("A2")
.Value = Date
.NumberFormat = "mm/dd/yy"
A1 will have the heading and from A2 till data exists it should show the current date .i used above code it gives date in A2 but doesn't copy to the remaining rows.
I'd like to add a number of calendar days to a date shown on Col A
I have 2 columns
a margin with a row number --- and Col A
When I try to add say 50 to the Col A ie =A261+50 to get 50 cd from cell A261 ----
I get a # problem
Tried to place 50 in a cell and then add the 2 cells but got the same result -- #
Can I use the margin row number to add to -- this would work well as I'd get the Row number which would also be the date.
I have a spreadsheet that retrieves data from a 3rd party app/database. The data that is returned has two dates..
ie..
1/1/051.31.4
1/1/051.31.4
1/2/051.31.5
1/2/051.31.5
1/3/051.32.6
1/3/051.30
etc..
What I would like to see is..
1/1/051.32.8
1/2/051.33.0
1/3/051.32.6
Date range varies, but usually there are two dates retrieved. Date is pulled and display within A2:A700 Range.