Missing Menu Commands
Oct 29, 2008
I have run into a problem with the Insert menu.
In the submenu
Cells
Rows
Columns
Worksheet
are "Greyed out" and therefore not available.
This happens when the application is first opened - no code is running it seems to be associated with the Personal workbook?
I have not encountered this previously.
IT help desk was its usual high standard - ZIP
I have searched this board without success.
The Microsoft Help functions were also silent.
View 9 Replies
ADVERTISEMENT
Jun 1, 2007
I need to disable the "save as" file menu command when a user opens a shared document. Upon exit I want to enable the save as so that other opened worksheets are not affected. This code works: CommandBars("File").Controls("Save As...").Enabled = False
My problem is this. I can activate this command by selecting run in the VB editor.
But I need for this action to be automatic when a user opens the worksheet. I did this in the editor:
Under general
Sub dISABLESAVEAS()
CommandBars("File").Controls("Save As...").Enabled = False
End
Sub WORKSHEET_BEFORECLOSE()
CommandBars("File").Controls("Save As...").Enabled = True
End
View 2 Replies
View Related
Nov 13, 2008
I have been using the "record macro feature". What I want the macro to do is as follows.
1. cut all data from column C and paste it into G.
2. Use the textTocolumns feature to split a comma delimited string into 2 seperate columns.
3. user the textToColumns feature to remove any leading spaces from column G.
4. cut columns d-H and shift them left startign in column C.
I can do all of this find bu using the GUI while recording the macro but when I check the vb script it's completely missing the paste commands.
When I try and run the macro it, quite rightly, returns "run-time error '1004':No data was selected to parse.
Below is the resulting recorded macro.
How do I amend this macro do include pasting the cut data?
View 2 Replies
View Related
Jan 2, 2009
I have not been able to find any references to anywhere, so here I am....
I'm using Excel 2003 that has a menu bar added by another program that interfaces with it (via DDE, as I understand it). The DLL's from the other program have no documentation and/or ability for me to connect to the particular drop-down menu command I'm using. It is a refresh command that re-imports stock market trade data because DDE drops trade messages.
View 11 Replies
View Related
Apr 17, 2008
I am developing a program for my electrical calculations (electrical panel). In the program, on my worksheet, I need all row inserts/deletes being watched and logged into another worksheet. I have become to a conclusion it would be best done by "taking over" default behaviour of built-in right-click menu commands like "Copy", "Paste" and "Delete".
In the ozgrid tips page I found some solutions how to deactivate those commands, but that is not what is best for me - when the menu item (or a corresponding key) is pressed, I would like to check if the ActiveCell (or ActiveRow) meats some criteria, and acording to that, make some changes in my "log" - and after - let further actions to default command behaviour. I think of it like "BeforeDelete", "BeforeInsert" or something. In fact the "log" is the worksheet with coordinates of my tables from the first worksheet, which should be changed according to new size of a table after the row insert or delete.
View 3 Replies
View Related
Dec 2, 2008
A spreadsheet that needs a new menu item in a custom menu does not show the custom menu code. Tools-->Customize-->Commands-->Rearrange Commands shows the menu and allows me to add a new menu item and macro.
After saving and exiting excel and going back into the spreadsheet, the new menu item is gone. How can I find the code to do this to keep the menu item? In the VBE, I looked in the object browser(F2) in all of the libraries and could not find the code. In the workbook_open and workbook_activate I can disable it with CommandBars("Worksheet Menu Bar").Controls("menu").Delete and it disappears.
View 14 Replies
View Related
Jul 8, 2008
I have two columns which i want to compare, they contain text data such as A123.
what I'd like is if its in column A and not in Column B then add to bottom of column A.
Once its in column A i can do the vlookup's to draw the other data, costs etc, over but don't know how to identify, and add, the missing codes to the list.
View 9 Replies
View Related
Jun 24, 2014
I have created a sub to add new controls to the "Cell" shortcut menu. Can I remove the standard "Cell" shortcut menu controls? if so how do you do it?
[Code] ......
View 4 Replies
View Related
Oct 20, 2009
I have a workbook with multiple sheets. Is there a tool that creates a menu bar or code that I can add that would support navigation?
My goal is to have something with approximately 4 options (buttons?). They would link to 4 different sheets that serve as indexes within the workbook.
I know I can add a control like a button to a given sheet that would take the user to given sheet when clicked, but can I make the button 'float' above all the sheets, or add to a menu bar, or something? I just don't want to have to add the button to every sheet in the workbook.
I am looking for something simple/easy, and am not looking for anybody to do the work. I just have no idea on how to approach the problem.
View 11 Replies
View Related
Oct 18, 2008
I have a column with various drop down menu boxes and I need to add another selection to the menu list. My problem is, it's been so long since I did the drop downs, I have forgotten how to do it..
View 3 Replies
View Related
Jul 2, 2009
I'm adding a menu selection to the right-click menu that you get for cells. I can add and remove the menu option but, when I try to execute the macro tied to the menu, I get "the macro...cannot be found". I can't figure out what appears to be a "pathing problem". I'm sure it's simple but...
Here's the
View 4 Replies
View Related
Mar 27, 2009
I have actually got the Window menu in the Main Menu Bar of excel deleted using below command.
Application.CommandBars("Worksheet Menu Bar").Controls("Window").Delete
View 9 Replies
View Related
Jul 15, 2006
Now this is something which I dont even know if it can be done, but its something which I would use, a lot. When clicking on a button, like a normal button from the control toolbox, is it possible to open a menu from this? So I click on the button i made called "accounts" and this opens a menu next to it with different options.
View 5 Replies
View Related
Apr 26, 2007
my worksheet menu bar is displaying the ' Chart' menu no matter what I do. Not only do I have no charts in the workbook, (verified this by: )
For Each ws In Worksheets
ws.Select
MsgBox ActiveSheet.ChartObjects.Count
Next ws
but adding worksheets, selecting various parts of a worksheet, creating a chart and deleting it, and everything else I've tried has no effect.
One interesting thing - the first chart I added (to test if it would 'unstick' itself upon deletion of the new chart) was named 'Chart 2', implying there was a chart1 that existed previously.... although I am fairly certain I never added a chart to this workbook at any point.
Also, the menu bar is working fine in other workbooks, and changes to chart and back to data like normal.
View 6 Replies
View Related
May 20, 2006
Suppose I delete a (unknown) number of items from the Worksheet Menu Bar. This can vary because of the fact that my excel sheet is being used by a different number of people, all with a different Worksheet Menu Bar configuration. Is there a way of counting how many Menu items are still left in the Worksheet Menu Bar?
So, suppose all that is left (after using the program) in the Worksheet Menu Bar are Excel, File, Tools, Help. How can the porgram find out that there are only 4 items in the menu?
View 3 Replies
View Related
Jul 8, 2007
I am taking an EXCEL(online) class and in my current assignment i am to create a 'list' for sorting and querying. However i cannot find the 'list' option, under my DATA option on the toolbar. I have tried all my toolbars and shortcuts but I am unable to find it anywhere.
View 9 Replies
View Related
May 12, 2012
How I use the Private Subs for Workbook_AddInInstall and Workbook_AddInUninstall with my addins and confirm it is nececessary to use them?
For 2 weeks, I have not been able to get my addins to activate and load into the AddIns tab. I think these missing Subs are why. Ironically, Every example on how to create addins never mention this step or it being necessary. I've even looked in Macros book and it does not mention anything about needing these subs in the Creating AddIns section so they will show up in the AddIns Tab.
How I can get my Addins in the tab and not the Quick Launch menu
View 8 Replies
View Related
Jan 30, 2008
I lost my command bar and tool bars (excel 97) all I have is the blue bar on top then the column letters. How do I restore them?
View 9 Replies
View Related
Dec 4, 2009
I would like someone to explain the reason why when the program is run, the maximum value in column S successfully is selected by being colored in pink, but the minimum in column R between those pink max's (indicated by the entire row outlined in red) is not the minimum.
In other words, look at the numbers in column R. Only the 14.08 rows are supposed to be boxed in red. I can't understand why the 30.08 and the 46.08 are boxed in red??? And puzzling to me is why the 46.08 near the top are boxed, yet the 46.08 near the bottom are not boxed.
View 7 Replies
View Related
Dec 17, 2008
I just want to have a column sorted by Z-A order and then A-Z by the same button, I recorded 2 macros on 2 buttons and tried to join codes with "if, elseif".
View 6 Replies
View Related
Feb 24, 2006
Is there any way that i could open and enter commands in ms dos
controlling from excel vba code?, like, say i wanted to change the current
directory in msdos from d: to c:, is there anyway that i could do it from
excel vba?
View 14 Replies
View Related
Jan 9, 2014
I have a template sheet where the only thing the user need to do is fill in all the appropriate cells and the click the button that says SAVE to save the file to the right folder and file name.
I want to Grey out the ribbon completely so that user can even change the font or any thing else for that matter. The sheet and workbook is protected. Need a way to stop any unwanted tinkering.
View 3 Replies
View Related
Jan 31, 2009
Sub elaseval()
For each cell in Range(“B7:B50”)
Range("cell.Value").Select
Selection.Copy
Sheets("Input").Select
Range("$E$7").Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Sheets("Sensitivity").Select
Range("C” & cell.Row : ”T” & cell.Row").Select
Selection.Copy
Range("C" & Cell.Row).Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Next Cell
End Sub
I am trying to apply this set of commands to each cell in the range B7:B50. For each of these cells, I need "cell.Value" to refer to the value in the respective cell and "cell.Row" to represent the row of the cell that is currently being used.
View 9 Replies
View Related
May 2, 2009
I am trying to remove File Commands from this specific workbook and force save and send functions through command buttons.
This is the code I tried in the workbook module to remove file commands(Excel 2003):
__________
Sub Workbook_Open()
Dim a As CommandBar
For Each a In Application.CommandBars
Application.CommandBars(a.Name).Enabled = False
Next
Application.CommandBars("File").Enabled = False
Application.CommandBars("Edit").Enabled = False
Application.CommandBars("View").Enabled = False........
View 9 Replies
View Related
Jul 24, 2009
I have made an Excel sheet that uses ActiveX controls (Option Box and Check Box). I have included a couple of screen caps at the bottom of this post to better explain the layout. Here are the specifics:
There is one Option Box Group labeled "InputOptionGroup" with choices labeled: "FirstOption", "SecondOption", "RefundOption" and "NoneOption".
Adjacent to the Option Box is a series of Check Boxes that correspond to the choice made in the Option Box with the exception of "NoneOption". The Check Boxes are labeled "FirstCheck", "SecondCheck" and "RefundCheck". Each Check Box object belongs to the group labeled "OutputCheckGroup".
I do know that the value of the Option Box choices and Check Boxes can be either True or False depending on if it has been chosen or marked, but I do not know how to incorporate these values into the action script. With that being said, here's what I'm trying to accomplish:
...when "FirstOption" is chosen, clear values of all Check Boxes and place a check mark in "FirstCheck".
...when "SecondOption" is chosen, clear values of all Check Boxes and place a check mark in "SecondCheck".
...when "RefundOption" is chosen, clear values of all Check Boxes and place a check mark in "RefundCheck".
...when "NoneOption" is chosen, clear values of all Check Boxes (no furthur action).
Also, there are a couple more requests:Is there a way to lock the Check Boxes from user input? I want the Check Box values to be altered only by the choice in the Option Box.
Take the "GPIN" field, the one on the right is locked from user input. This particular cell references user input from the "GPIN" field on the left. Is there a way to return a blank value when the input field is blank insted of returning a "0"? If you notice, all fields on the right reference blank values as "0".
In the left "Amount" field, I need to display a "$" followed by the value in the input "Amount" field
View 9 Replies
View Related
May 13, 2014
I want to accomplish a few things in one cell. The basics are this:
I want to pull the lowest numbers from a given sample. The sample needs to have a time component (10 lowest out of the most recent 20 results). Those numbers are to be averaged. That average is to be multiplied by .96, then that final yield needs to be truncated to 1 decimal.
Now, I'm not sure this is possible or not. But, if it is, I want to also select the amount of numbers I pull from the sample to average to be based on the sample size itself. For example, if there are 10 results in the sample size, I only want to average the lowest 3 of the 10.
Is it possible to formulate all of these rules into one cell?
View 1 Replies
View Related
Mar 30, 2014
View attached file. I have a complexity rating that I have developed for a set of projects that I am working on. Management of my company have signed off on this matrix as they believe it is most appropriate. In my projects pipeline tab, I have created the risk and complexity ratings using logical commands.
projects.xlsx‎
View 10 Replies
View Related
Jun 23, 2012
I have the code that accompanies the attached spreadsheet model that locks the copy, paste, cut, double click and so on, with the right mouse button and shortcut keys, however, the toolbar excel these functions still remain active. How well I block access to the toolbar.
Desable_Ribbon.xlsm‎
View 14 Replies
View Related
Feb 20, 2014
I need to transfer two commands to command prompt. The first one is always the same and it calls a command line of another application (BEAM). The second command is for the BEAM command line. It is taken from an Excel cell. The code I managed to write is transfering only the first command, probably because after execution of the first command command prompt is getting BEAM command line. I
[Code] .....
View 2 Replies
View Related
Nov 26, 2011
What are the different commands for pasting data from excel to word? The code I have below pastes excel cell data to word as a picture. What if I want to paste excel cell data as embedded in the word document (I don't want it linked, just want the user to be able to edit it as an Excel sheet within the Word document). Thinking that I need to change the "DataType:=wdPasteText" part, but I don't know the correct syntax. Tried wdPaste but that did not work.
sub mysub()
Dim WdObj As Object, fname As String
fname = "myfilename"[code]....
View 9 Replies
View Related
