Recorded Macro Missing Paste Commands
Nov 13, 2008
I have been using the "record macro feature". What I want the macro to do is as follows.
1. cut all data from column C and paste it into G.
2. Use the textTocolumns feature to split a comma delimited string into 2 seperate columns.
3. user the textToColumns feature to remove any leading spaces from column G.
4. cut columns d-H and shift them left startign in column C.
I can do all of this find bu using the GUI while recording the macro but when I check the vb script it's completely missing the paste commands.
When I try and run the macro it, quite rightly, returns "run-time error '1004':No data was selected to parse.
Below is the resulting recorded macro.
How do I amend this macro do include pasting the cut data?
View 2 Replies
ADVERTISEMENT
Oct 29, 2008
I have run into a problem with the Insert menu.
In the submenu
Cells
Rows
Columns
Worksheet
are "Greyed out" and therefore not available.
This happens when the application is first opened - no code is running it seems to be associated with the Personal workbook?
I have not encountered this previously.
IT help desk was its usual high standard - ZIP
I have searched this board without success.
The Microsoft Help functions were also silent.
View 9 Replies
View Related
Jul 15, 2014
I've recorded a Marco copying and pasting information from one cell to other cells and some of the copying functions paste to two cells. I just need this to loop through all information I'm copying from the the new cells.
Range("I1").Select
Selection.Copy
Range("D1").Select
ActiveSheet.Paste
Range("J1").Select
[Code]...
View 7 Replies
View Related
Mar 23, 2012
In the past when I copy and paste a cell, the new cell contains the formula from the old cell, with relationships between other cells maintained.
Recently my excel stopped copying formulas and copies only cell values from the old cell. It now acts as it used to act if I did a Copy-Paste Special -Values operation.
If I do select Paste Special, it grays out the formulas option and only lets me cut and paste values.
View 3 Replies
View Related
Jun 1, 2014
I want to clean up this recorded macro but not sure how, it highlights duplicate values in a column
[Code].....
View 3 Replies
View Related
Jul 15, 2012
shortening the below recorded macro?
Code:
Sub Macro1()
'
' Macro1 Macro
[Code].....
View 3 Replies
View Related
Oct 26, 2011
I have recorded the following macro and made few changes to it with my little VBA knowledge. But the code still looks very messy.
Code:
Application.ScreenUpdating = False
Sheets("Sheet2").Select
With ActiveSheet.QueryTables.Add(Connection:= _
"FINDER;E:MacrosBSE Indices.iqy", Destination:=Range("A1"))
.Name = "BSE Indices"
.FieldNames = True
[Code] ..........
View 9 Replies
View Related
Oct 2, 2006
I have recorded certain macros. But after executing macro 'Undo' do not work. How can I do it ?
View 3 Replies
View Related
Jan 31, 2009
Sub elaseval()
For each cell in Range(“B7:B50”)
Range("cell.Value").Select
Selection.Copy
Sheets("Input").Select
Range("$E$7").Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Sheets("Sensitivity").Select
Range("C” & cell.Row : ”T” & cell.Row").Select
Selection.Copy
Range("C" & Cell.Row).Select
Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Next Cell
End Sub
I am trying to apply this set of commands to each cell in the range B7:B50. For each of these cells, I need "cell.Value" to refer to the value in the respective cell and "cell.Row" to represent the row of the cell that is currently being used.
View 9 Replies
View Related
Sep 21, 2009
I recorded a macro (which worked), then tried to get more out of it by adding code to add a further function (which didn't work). The code is as follows:-
View 3 Replies
View Related
Aug 10, 2011
I have a workbook where I need to sort data with range (K2:L24), then move down 208 rows and sort range (K210:L232) and repeat this upto 1000 times. I have shortened a recorded macro as an example and would like to know how to loop or repeat.
Sub Macro2()
'
' Macro2 Macro
' Macro recorded 6/04/2011 by Greg
[Code].....
View 4 Replies
View Related
Dec 8, 2011
Below is a recorded macro i am trying to apply on a pivot table.
Code:
Range("F4:H4").Select
Range("H4").Activate
Selection.AutoFilter
ActiveSheet.Range("$G$4:$G$100000").AutoFilter Field:=1, Criteria1:="21", Operator:=xlTop10Items
The problem i am facing is that when i am trying to run it is not working.
View 9 Replies
View Related
Nov 18, 2013
I've recorded a macro in which I unhide certain columns, copy and paste some information then hide those columns again. The problem is that when the macro is finished, it incorrectly hides columns K to AN. I did not record that and it's not in the code so I'm lost as to why it's happening.
The macro is as follows :
Code:
Sub COPY()
'
' COPY Macro
'
'
Application.ScreenUpdating = False
Columns("K:BT").Select
Selection.EntireColumn.Hidden = False
Range("M5:N24").Select
Selection.COPY
[Code]...
Why it's hiding everything from K to AN. I've tried recording the macro several times but it's just not working, no matter the order in which I hide columns when recording it.
View 5 Replies
View Related
May 11, 2009
I have a list of items in Sheet1 column A (starting from row 1).
I would like the corresponding column B to have certain values depending on the value in column A (same row), as follows:
If the value in column A has "SYS????CZ", column B should be "HPC"
If the value in column A has "SYSNIS", column B should be "NIS"
If the value in column A has "SYSJBE", column B should be "JBE"
If the value in column A has "ICG????", column B should be "HPC"
If the value in column A has "IL????", column B should be "RUP"
If the value in column A has "SYSHPC08", column B should be "HPC"
What I tried was to record a macro while typing the formula in B1: ...
View 9 Replies
View Related
Aug 30, 2006
Im setting up a spreadsheet that does engineering calculations. Im using macros to run sizes from a standard schedule. It basically takes the values from one sheet (schedule) to another (calculation), then the result from the calculation sheet (Value only, not the link) is pasted back into the schedule. The macro seems very bulky and im sure that it can be made more efficient with a loop. here is a sample of the code from the macro;
Sheets("Calc sheet").Select
Range("C6").Select
ActiveCell.FormulaR1C1 = "=Schedule!R[1]C"
Range("C7").Select
ActiveCell.FormulaR1C1 = "=Schedule!RC[1]"
Range("C8").Select
ActiveCell.FormulaR1C1 = "=Schedule!R[-1]C[2]"
Range("C9").Select
Sheets("Schedule").Select
Range("G7").Select..................
View 3 Replies
View Related
May 30, 2008
I manually create a pivot table (and record my actions) the pivot table references all of the information in my data range (70k+ lines). When I run the recorded macro the new pivot table limits the data range to the first 65536 lines (the old limit)....
View 6 Replies
View Related
Dec 13, 2011
Is there a way (with macros, I''m assuming), to make my workbook always return to the Main tab and Save automatically --- every time somebody closes the workbook from any tab - so that the next person who opens the workbook will have it ready to go on the main tab?
View 5 Replies
View Related
Sep 21, 2009
On column A, I simply do an A-Z sort that gives the expected result. So I recorded it as a macro. In column G is a code that corresponds with column A. When the marcro is executed Column A is sorted but the corresponding value in G stays where it is. Clicking the A-Z button works. But when that action is recorded as a macro I get the above quirck. Since VBA is not my beef, I don't really know what wrong.
View 4 Replies
View Related
Oct 12, 2012
I have following macro recorded to extract data from a mainframe system
open "C:DesktopReportRBDRBD.txt" for OUTPUT as #1
rc% = ps.sendstring("{clear}")
rc% = ps.sendstring("a24octdelbom*9w{enter}")
test1 = PS.getdata(450,3,27)
print #1,test1
The requirement here is run the above macro for the next 30 days automatically, for example
rc% = ps.sendstring("{clear}")
rc% = ps.sendstring("a25octdelbom*9w{enter}")
test1 = PS.getdata(450,3,27)
print #1,test1
and so on till 23 Nov. From the start date the macro should run for the next 30 days. Currently i am changing the dates manually in the macro
View 7 Replies
View Related
Apr 22, 2013
I have a button with a macro assigned. The macro needs to create a new worksheet at the end of the workbook, rename the new sheet to "New County", make the cell size match the rest of the workbook, and then paste in a template from another sheet called "Master".
I recorded a macro that does this, but it has a static reference to the new sheet instead of what ever the new sheet is. So the Macro works one time, but never again. I'm sure this is an easy fix, and perhaps there is a much easier way to do this, but my limited VBA knowledge is hampering me.
Code:
Sub AddNewCounty()
'
' AddNewCounty Macro
' Adds a new County sheet to the workbook.
'
'
[Code]...
View 9 Replies
View Related
Nov 20, 2006
I am trying to build a word document from an excel macro (with some success) and I am running into some issues with excel not understanding some of the word macro commands. An excellent example of this is when I am trying to insert a page break as seen in the below code snippet:
'open word and create a new document
Dim wdApp As Object
Set wdApp = CreateObject("Word.application")
wdApp.documents.Add
'put some text into the document
wdApp.Selection.typetext Text:="Document title"
wdApp.Selection.TypeParagraph
'insert a page break
wdApp.Selection.InsertBreak Type:=wdPageBreak
I know the insert break command works fine because I can get it to work within a word macro. When trying to get excel to run it in word is another story. I get the following error message:
run-time error '9118':
Parameter value was out of acctable range
Debug
wdPageBreak = empty
View 9 Replies
View Related
Mar 10, 2014
I have csv file with tab delimited fields (see attached blacklist.csv). 3rd and 4th fields are in format dd/mm/yyyy hh24:mi:ss, some fields can be zero. I need to split data to columns and display datetime fields in format dd.mm.yyyy hh:mm:ss.
OK... open csv in Excel, select column A, press button "Split in columns", select tab as delimiter, choose date format (DMY) for 3rd and 4th field and press OK. Test is splitted into columns, now select columns C and D and select desired format "dd.mm.yyyy hh:mm:ss". Then I select columns A:E and set column widths to fit data in columns. This all is OK and without problems (see attached file Handmade.xlsx).
But now... Now I record all previous step into macro. There is macro text: [Code] ....
Now I copy macro text into clipboard and open blacklist.csv again. Insert button to list and bind it to new macro. Paste text of macro from clipboard. (See attached file blacklist_beforeClick.xlsm). Now click button Btn and voila... some dates remain in previous format, some dates seems to be in desired format, but day and month are swapped. Why are there differences when comparing data made by hand and data made by macro??? compare.jpg This is the same behavior in more computers, some use Czech version of Excel 2010, some use English version.
View 2 Replies
View Related
Feb 13, 2014
The code I have below is relevant to this spreadsheet Copy of Invoice test.xlsm
In the code below I marked the script that has issues in red. The code takes the last row and the last column and works from there. This works fine with single commands, however, when I take a cell (based off the last row and the last column) and try to give that cell multiple commands excel sends back an error. When I use this multiple command (see part of code that is marked in red) for a range that is not based off the last column it works fine.
[Code] .....
View 9 Replies
View Related
Jan 23, 2013
I have recorded a macro to sort a range of cell based on two values that is dependent on time in another cell. I now want the macro to run automatically when refreshing the workbook with F9, so as the time changes so will the sorting. Everything works fine except the sorting doesn't refresh when F9 is refreshed.
My recorded macro is:
VB:
Private Sub Worksheet_Change(ByVal Target As Range)
Dim X As Long, FillCT As Long
For X = 1 To 4
If Cells(Rows.count, 1).End(xlUp).Offset(0, X - 1) <> "" Then FillCT = FillCT + 1
[Code] .....
View 4 Replies
View Related
Mar 20, 2014
I am working on a project where I am virtually almost finished except for a minor change with the pie chart. I am analyzing some data and recorded a macro to do this and also the pie chart for visualization. However, I do not like the color of the default pie chart colors and would like to customize it. How could I change this within the macro I have recorded?
[Code] .....
View 4 Replies
View Related
Nov 20, 2013
I have been given a macro recorded on a mac and it works fine with Mac Excel 2011. Unfortunately, I need to make it to work on a windows machine, but it comes up with an error message "macro unable to set width property of the window class. Run-time error 1004". When I press debug it takes me to the line .Width = 1456.
Below is the chunk of the code that becomes highlighted when pressing debug.
With ActiveWindow
.Width = 1456
.Height = 795
End With
View 3 Replies
View Related
Jul 28, 2006
I recorded a function and got the message box "Invalid Outside Procedure" when I tried to run the macro. I don't understand what it means or how to prevent it.
View 2 Replies
View Related
Jul 8, 2008
I have two columns which i want to compare, they contain text data such as A123.
what I'd like is if its in column A and not in Column B then add to bottom of column A.
Once its in column A i can do the vlookup's to draw the other data, costs etc, over but don't know how to identify, and add, the missing codes to the list.
View 9 Replies
View Related
Aug 26, 2009
In Excel I've always had a Personal file come up when Excel was opened. It may have accidently got closed??? The personal file does not open with Excel and I am unable to find it. It is required to run macros correct?
View 13 Replies
View Related
Jul 31, 2008
My macro is missing following excel shutdown and autorecovery, it still runs but when I open the relevant module the module is empty, and I can't view the code
View 4 Replies
View Related
