Compare Rows Between Sheets
Aug 22, 2006
I have 2 sheets that have 15 columns and approximately 200 rows on average, but the number of rows varies from week to week. I need to compare the information on sheet 3 to the information on sheet 1 by row. There are actually 3 worksheets total, but the 2nd worksheet is not involded in this macro. If the 2nd-14th columns are an exact match, I need to have the date from the first column and the notes from the 15th column (the formatting has to be copied too!!!) on the first sheet copied over to the matching row on the third sheet into the 1st and 15th columns, and the 16th-18th rows on the first sheet need to be copied over to the third sheet as well. After all this is done, the row on the first sheet needs to be deleted.
I need it to compare all of the rows this way, and unfortunately, I think it is going to have to loop through every row on the 1st sheet for every row it is comparing from the 3rd sheet.
I know this will take quite a while to compare, but given this takes me a couple hours on average, letting the macro run for 5 or 10 minutes is a vast improvement
View 9 Replies
ADVERTISEMENT
Mar 2, 2007
I'm trying to do is compare 4 columns on 2 sheets. I would like to go down in column "E" on sheet1 and find the exact one on column "A" on sheet2. Once these are equal I would compare F, G, H, on sheet1 with B, C, D on sheet2. If the these three columns are not the same I would like to copy from sheet2 B, C, D from sheet2 to F, G, H.
The problem I have is none of the rows of information will be in sequential order as well as we may not have a match. What I'm saying is row1 on sheet1 could be row1000 on sheet2. Attached is a small example. in the example rows 6, 11, 12, 16 and 19 would be the only changes on sheet1. My example does have the rows in sequential but that would almost never be the case for me....
View 9 Replies
View Related
Aug 8, 2008
I want to count the number of data rows in Sheet 1, Count the number of data rows in Sheet 2 and display a message if they are not equal. I have tried various IF(COUNTA statements but cannot get the correct syntax.
MACKE
View 2 Replies
View Related
Jul 30, 2014
The following code compare two sheets and remove the duplicate rows to a new sheet. In this code I have to create the third sheet manually.
I need the "New Sheet" to be create automatically with the name of "Dup".
Code:
Option Explicit
Sub nomatchnoty32()
Dim X, i As Long, j As Long, Y(), Dic As Object, k&, Z, name1$, name2$
Const shSource1 As String = "sheet1"
Const shSource2 As String = "Sheet2"
[Code] .........
View 6 Replies
View Related
Apr 26, 2008
I have three worksheets that I am combining into one master worksheet. The data from Worksheets 1 & 2 are listed combined under the same headings onto the master worksheet. I have three additional headings on the master that need to populate information from Worksheet 3 under them. I would use VLOOKUP to populate those fields if it weren't for the problem that some asset numbers have more than one entry. The request I received is to insert copy the criteria row below it so that there are an equal number of entries for each occurance of information from Worksheet 3 to copy that data to.
(example = Asset 12345 has 3 different work orders on Worksheet 3, therefore I have three rows for Asset 12345 on the master with the data I need copied under the 3 headings.)
To figure out how many rows to insert I created a last column (that I will delete at the end of the macro) that uses COUNTIF to count the number of occurences of the asset number on Worksheet 3. I want my macro to look down this column and for every value over 1 add rows equal to that value-1 beneath the row. I then need to copy the information from the criteria row into the newly inserted rows. I will need to figure out how to populate the data from worksheet 3.
I tried recording a macro of me using FIND >1 values while selecting the column containing criteria and it didn't work because it likely was literally looking for ">1".
View 4 Replies
View Related
Oct 17, 2009
I know,there are "compare sheets" threads everywhere,but i think every thread is different,because we want different comparison and different results
To the point now.What i actually want to do is a "turnout" of difference between two sheets.Both sheets use columns A and B. On column A there is a code and column B the quantity of the code. So obvisously i want to compare those two columns of these two sheets,and paste the results on a different sheet. The difficult part is that the same code of a cell in Column A with its column B must be sorted so i can see the difference...else it would be a mess.
View 5 Replies
View Related
Jan 24, 2012
I put the following together. The is that it loops through row A until it gets to the last cell. For each loop it loops down the column to the last row of data looking at the same cell on sheet 2.
But I'm having trouble with the Range(RngCell, Y).select portion. As the active cell can't be a static column letter I need to reference the active column.
Code:
Sub SheetComparison()
Dim rngCell As Range, rngMyRange As Range
Dim lngLastRow As Long
[Code]....
View 2 Replies
View Related
Nov 20, 2004
We have a software that we use for budgeting, and every now and then, we have to export and validate the data in Excel to be in sync with the system. What I would like to do is after extracting the data into a spreadsheet, compare it with VBA and create a report in a seperate sheet, that shows the differences between sheet1 and sheet2. The data has 11 different dimensions from column A to K and is in the same order both in the master and recon files.
AU ID
Accounting Unit
Description
Lawson Division
Division
Product Line
Mid/View Consolidator
Mgr Responsible
Cost Center
Opex Rpt
Allocation Pool
I have found a compare macro which only compares and finds the exact match of the sheets in exact cells
Sheet1(A1) 1 Sheet2(A1) 1
Sheet1(A2) 2 Sheet2(A2) 2
Sheet1(A3) 3 Sheet2(A3) 3
Sheet1(A4) 4 Sheet2(A4) 5
Sheet1(A5) 5 Sheet2(A5) 6
If this was the case then everything as of cell A4 would be marked as an error, even though I have the value in a different cell in the next sheet.
View 9 Replies
View Related
Oct 17, 2007
I have two spreadsheets each with "Vendor names" on column A. sheet 1 is my master sheet and sheet 2 is the sheet that has the information i like to carry over to sheet 1 when the conditions are true. Hence when colum A on sheet 1 equals column A on sheet 2 copy the range of cells b-h in sheet2 to match to sheet1.
here is my code i figuere that if i stared with two columns it would be rather simple however i cant even get my own code to work. Any help or suggestions would be greatly appreciated. By the way my spreadsheet is 6,000+ lines long
Here is the code
Sub compares()
Dim rng1 As Range
Dim rng2 As Range
Dim RowNo As Long
Set rng1 = Worksheets("Sheet1").Range("A1", Worksheets("Sheet1").Range("A" & Rows.Count).End(xlUp))
Set rng2 = Worksheets("Sheet2").Range("A1", Worksheets("Sheet2").Range("A" & Rows.Count).End(xlUp))
For Each c In rng1
If Application.WorksheetFunction. CountIf(rng2, c) > 0 Then
RowNo = Application.WorksheetFunction.Match(c, rng2)
c.Offset(, 1).Resize(1, 2).Value = Worksheets("Sheet2").Range("B" & RowNo, "C" & RowNo).Value
End If
Next c
End Sub
View 9 Replies
View Related
Dec 18, 2013
i have a list of information on one spreadsheet, for instance in column A i have countrys in column b i have descriptions and in colum d i have names. there is several hundred lines of this information and someone has gone in and edited some, taken a few lines out etc, i was just wanting to know how i can compare the two sheets to see what changes have been made? Or what now doesn't match up etc?
View 6 Replies
View Related
Mar 4, 2013
Sheet summary2 has the table. And I am looking to compare and add the data (from all sheets Date 1 to Date31) . I am looking to add those values (yes as 1) in my summary 2 sheet for the range E3 to H14 ...if it mathces as MF8330 or x543 or c5045 or x940.
View 4 Replies
View Related
Jun 26, 2014
Macro that compare between 2 tables in 2 different sheets - BOM (Bill Of Materials) compare
And Create a Table with all differences.
Table 1 (sheet1):
PartNumQTYLocation
000 2 A1
111 3 B1
222 1 C1
333 4 D1
Table 2 (sheet2):
PartNumQTYLocation
333 3 D1
000 2 A1
111 3 B2
222 1 C1
444 5 E6
Table with all differences (sheet 3):
PartNum (Ver1)PartNum (ver2)QTY (Ver1)QTY (Ver2)Location (Ver1)Location (Ver2)
111 111 3 3 B1 B2
333 333 3 4 D1 D1
Blank 444 Blank 5Blank E6
View 2 Replies
View Related
Apr 30, 2009
The code below compares values on sheet 4 column A to sheet 3 column A and then colors a cell "Green" (Temporary), later I will place data from sheet 4 into sheet 3.
I dont know why but when it finds data on sheet 4 that is not 100% numeric it errors out.
Run-time error '91'
Object variable or With block variable not set.
The data in sheet 4 column A is primarily numeric, there are and always will be some numeric/alpha strings.
I can change the value of sheet 4 A2 to "123x" from "123" and the code stops as described. Leaving sheet 4 A1 as 100% numeric, which works fine.
View 4 Replies
View Related
Mar 13, 2009
I'm not 100% sure how to describe what I need to do but here goes. I have two similar spread sheets. The first contains all the products in a shop with the new prices and new item codes.
The second sheet has all the old item codes old prices and some duplicates and items that do not exist any more. Both spread sheets have lots of column but only 3 that I need to worry about. Item code, Product Name and Price.
What I have tried is using the If command (in the item code column) to search through the Product Names (on the updated sheet) and put the right item code next to the right product (on the old sheet) but it didn't work.
View 5 Replies
View Related
Mar 29, 2013
I will like a macro to compare row one to row one on sheet 2 column A. If the number is the same then it will compare from the same row column K from sheet 1 and column m from sheet2. If it is less then copy to sheet4 and highlight in red, if more than highlight in blue and if equal green.
View 6 Replies
View Related
Sep 28, 2007
If the record exists in both sheets then compare the value in col. H for both records, if the value is different then copy the entire record to a third sheet.
There are 16,000 rows of data to do comparisons.
I have been thinking about a Vlookup method as one choice, my thought is this going to be slow.
I have read about vba having some comparison choices, vbbinary, vbtext, but I do not have any knowledge of this, so cannot intelligently choose what options to begin w/.
View 9 Replies
View Related
Sep 26, 2006
I'm trying to cmpare two excel spreadsheets, each one of then have 3 columns with column A being the KEY to lookup and compare records into another spreadsheet. So in my example spreadsheet If u take cell ZVNA!A1 and lookup for values in ZSKU!A* and find a match then comapre the B1 and C1 in respective ZSKU! Column B and C. If there is a record for A1 in ZVNA then comapre it's column B value with column B value of ZSKU, and column C value with column C value of ZSKU. I have not used macro/vba before so if you could tell me formula based solution that will be good or point me how to use macro. I did Vlookup but it did not return me 100% accurate result may be bec my format of column is not accurate.
View 2 Replies
View Related
Nov 28, 2006
I am in the process of comparing values between two sheets.
I would like to search on column A on both sheets and check whether there is a corresponding value in the sheets.
If there isnt then I would like to take that record and put it into a new sheet.
My code is as follows
Public rowcn
Sub auto_open()
Dim iCounter As Integer 'counter as integer
data_sheet = "CASES_ANALYS"
data_sheet2 = "A_CASES_"
target_sheet = "Final Report"
Currently I'm just displaying it in a msgbox but would like to paste the specific record into another sheet but not sure how to do this.
So far this code doesnt work
View 9 Replies
View Related
Sep 7, 2007
I have 2 sheets that either contain the exactly or close to same data. I have Sheet1 and Sheet2, and I want to highlight ALL cells in Sheet2 that are not the same as the ones in Sheet1. That is, I need to give a cell in Sheet2 a different background color (to highlight) if:
the cell in Sheet2 has a different value than the cell of the same location in Sheet1
the cell in Sheet2 is blank but the cell of the same location in Sheet1 has something in it
the cell in Sheet2 has something but the cell of the same location in Sheet1 has none.
All highlighting needs to be done in Sheet2. The problem with the codes that are already available in this forum seem to have problems when the ranges of cells used in the two sheets are different (out of bounds, etc...)
View 2 Replies
View Related
Apr 25, 2014
designing a macro, which can compare the sheet1 and sheet2 data (exclude E and G columns) and find duplicates rows of data in sheet1 and sheet2. The output after the macro, would be show duplicates found in sheet1 and sheet2, through highlighting the rows.
attached file for the sample data:
output_data.xls
View 1 Replies
View Related
Jan 6, 2014
3 Sheet Excel document- What i'm trying to do is compare the contents of Column A sheet2, with Column J sheet3.
I would like only the variances printed on Sheet A. So- Sheet A says "The following was found in Sheet2!A, but not Sheet3!J"
Demo excel spreadsheet attached. Comparing "NASC Column A" with "RQ4 Column J"
View 4 Replies
View Related
Apr 17, 2014
I am relatively new to VBA macros. I am having two sheets, in one sheet I have a non-contiguous 20 rows range and in the other sheet I have a 20 row contiguous range. I need a macro which will compare data between the two ranges(one to one compare) meaning 1st row of the first range should compare with 1st row of the second range and if it matches then it should populate the adjacent column in the second sheet with true or false accordingly.
View 2 Replies
View Related
May 9, 2014
sample macro code to compare 2 different columns from 2 different sheets. At the end there' my code
Here's the columnA in sheet1
ColumnA
ColumnB
red
orange
[Code]....
View 1 Replies
View Related
Jul 16, 2014
I am trying to compare two excel sheets in same file say sheet1 and sheet2 and the differences should be displayed in sheet3
if there is a text differences i m able to capture them but i m unable to capture the diferences between the two cells that are underlined, hyperlined colored etc. is there any function in vba to do that ???
View 1 Replies
View Related
Feb 3, 2014
Is it possible to compare two sheets and extract out the differences?
View 2 Replies
View Related
Nov 4, 2009
This compares cells in every sheet to a master sheet "AllUnits" and deletes all the matched rows on the Master. I modified it slightly to also delete the matched row on the source sheet as well (looking for rows that are not matched on any sheet). This works to a point, but I have to re-run it many times since when the source row is deleted, the code actually skips to the next row. I tried to reset the source variable with
View 2 Replies
View Related
May 18, 2006
I have two sheets with about 7000 records in each. They both have two columns only. One is the master list. I want both of the files to be compared and then all the duplicate entries to be deleted from both files.
Ultimately I want to have only the entries in the master sheet that are not in the other sheet.
View 3 Replies
View Related
May 21, 2006
I've attached two separate workbooks that have indentical sheets in each. One workbook is a 2 day later update of the first. I'm trying to develop VBA code that will open both workbooks uses column B (work order #) as the unique identifier for each like sheet (which represent a month) and compares all other columns for that unique indentifier. Then I need to generate 3rd workbook that is identical in format (has a sheet for each month) and content to the two source ones but shows the unique identifier and any changes:
Column A (due date)
Column d (order quantity)
Also,if in the newer workbook(5_12_06) there exist a unique indentifier (work order #) that was not in the older workbook(5_10_06) and the same if there exits a unique indentifier in the older workbook that was removed in the newer workbook.
View 2 Replies
View Related
Apr 10, 2007
I have a list of names on 2 separate sheets that I need to modify. If I have a name on sheet1 matches a name on sheet2 I would Like to add a "space" then "(SV1) at the end of the text string on sheet2. I have a list of 1500 and will only have to modify 75-100. Example shows on sheet2 how I would like the desired outcome to be.
View 3 Replies
View Related
Jul 17, 2007
I need a macro that will compare two sheets, find the differences and produce a new third sheet called, results. Both sheets to compare will differ in length of values (one may have 10 numbers to compare, and the other could have 50, Ive attached sample data), and thus this calls for a primary and secondary sheet. I would only like the values which appear in the primary and not the secondary sheet to be reported in the new results sheet.
The problem is that the values never match up, but they are always within a +/- 0.5 window of each other. It would be great to compare the two sheets, to produce a list of the values which appear only in the primary sheet and not the secondary. Im trying to get this to link up to a userform, where the user select the primary sheet (A) and the secondary sheet (B), selects the tolerance, and produce the results sheet (see attached).
View 8 Replies
View Related
