Any way to do the following on a per sheet basis? ie: Sheet1 goto A4; Sheet2 goto G27?:
Private Sub Workbook_SheetActivate(ByVal Sh As Object)
Application.Goto Sh.Range("A1"), True
End Sub
This works to make them all go to the same cell, any ideas on a way to make them differ per sheet?
I'd like to know if anybody of you knows which is the property that determines the number of tabs in a tabbed panel. I'd like to realize a dynamic tabbed panle where the number of tabbed panels are regulated by a variable.
View 5 Replies View RelatedHow do I use the GoTo so that I can Specify A line of Code to go to...
for example
I have some coding under the property list command button which filters the date 3 times and copies the filtered data to another sheet. This works with data in the sheet, however if there is no data on the sheet I get an error message.
There is a line that says on error goto reset1 on the first filter and goto reset2 on second filter (and so on) which works on the first filter but not on the second or third filter. I have attached the file.
I have a drop down box linked to cell A2 for example, when the change is made on the drop down box the linked cell returns the value 1,2or 3. I'm not sure if I require a code or an 'IF' command - but what I would like to achieve is that say when 2 is selected I want to goto sheet 3 A1, if 3 is selected then sheet 3 A2 and if 1 then nothing happens. Or can I make the function dependant on what the drop down box displays e.g Correct, Not Correct and Requires Change. (1,2 and 3 respectively).
View 3 Replies View RelatedWhat I am trying to accomplish with the code below is that if sheet statusReport does not have any information on cell N2, then execute the code after NextLine:
If there is information then perform the Else statement and continue through the end of the code. However, I am getting an error of Else without If. If I remove the Else, then my the code below NextLine: does not execute.
I narrowed down the issue to the GoTo placement, but I don't know of any other way I can skip the For Loop after the If/Then statement. I tried doing an On Error, but there is no Error, the cell checks empty.
I am hitting a brick wall.
Code:
Sub copyeeInfoToClientSheets()
Application.ScreenUpdating = False
With Sheets("byEmployee")
Set rng = .Range("A2", .Range("A" & Rows.Count).End(xlUp))
End With
For Each WS In Sheets(Array("allEmployeesAnnualized", "allEmployeesHourly", "allEmployeesSalary"))
WS.Rows(7).Resize(rng.Count).Copy
rng.Copy Destination:=WS.Range("A6")
[code]....
I have a wicked wide spreadsheet that has 76 dates. These dates are in weekly increments. (IE 7/4, 7/11, 7/18)
I already have it set up to highlight the current week that I'm in, and there is an arrow above the column. Can I make a button to go to the current week? Like today, I would go to week 7/11.
I saw something with find.max, and give the date in Excels number format. Is this the right way to go?
i have this code that gives me 1st row of data , from Row 10 of every sheet in workbook, how can i modify to give me row 11 ,12,13,14,15,16 as well upto row 21 if there is Data in Col C ( max range is C10:C21) ,
For intX = 1 To Sheets.Count
For intY = LBound(arySkipSheets) To UBound(arySkipSheets)
If Sheets(intX).Name = "MachCapRpt" Or Sheets(intX).Name = "MachAdSht" Or Sheets(intX).Name = "Times" Or Sheets(intX).Name = "MachSchd" Then
Else
.Range("A" & intNextRow).Value = Sheets(intX).Name
.Range("B" & intNextRow).Value = Sheets(intX).Range("B10")
.Range("C" & intNextRow).Value = Sheets(intX).Range("C10")
.Range("D" & intNextRow).Value = Sheets(intX).Range("E10")
.Range("E" & intNextRow).Value = Sheets(intX).Range("H10")
.Range("F" & intNextRow).Value = Sheets(intX).Range("M10")
.Range("G" & intNextRow).Value = Sheets(intX).Range("W10")..............
I want to find the cell location of the largest value in a specific column.
for example: column C has 5 rows of different values : 5, 12, 4, 7,9 and I want to find the cell reference of the largest number which is 12.
I know that I need to use "Large" function in order to find the largest number, but what do I have to do in order to find the cell location of it?
I'm using a on error goto approach, heres the code.
View 2 Replies View RelatedI have this bit of code and I am curious why when the activecell is J29 it will not goto line 20 it just keeps running to the next line?
View 4 Replies View RelatedI have this code that works, except, for addressing with the Goto - I need to go to the CONTENTS (new row,column) of that location which is being changed elsewhere and I can't figure it out
View 6 Replies View Relatedwhy the On Error GoTo statement only executes the first time an error occurs in the following
On Error GoTo CubeNotFound
For x = 2 To TotalRecords
Cells.Find(What:=WSID, After:=ActiveCell, LookIn:=xlFormulas, LookAt:=xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False, SearchFormat:=False).Activate
'Other actions are located here, but have been removed. These actions take place if the Find is succesful.
CubeNotFound:
Message = MsgBox("WS ID " & WSID & " was not found! Excel will continue with the next WS ID.", vbOKOnly, "WS ID NOT FOUND")
Next x
I have that statement there because if WS ID is not found then VB generates an error that the user won't be able to interpret, and also stops the code. I want VB to continue to the next record if one is not found.
I am trying to copy A1 into F8 only if F8 is empty, if not do nothing.
My code copy A1 into F8 regardless F8 is empty or not and overides my entry in F8.
Private Sub Worksheet_Activate()
If Len(F8) = 0 Then GoTo line1 Else GoTo line2
line1:
Range("A1").Copy
Range("F8").PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Application.CutCopyMode = False
line2:
Exit Sub
End Sub
I have to copy and paste from 15 different worksheets to one worksheet each week. The size of each copy varies from 500 to 1000 rows and is sequential for each worksheet. In other words, if I am copying rows 1 to 500 this week, then next week I will copy from 501 to 1000. I would like to do this in a macro. I can easily figure the ranges each week by incrementing, and they can be listed in a workbook. Is there a way to copy that range into the macro as it is running? It would kind of be like saying the range to copy is '=B5' and B5 cell contains the script A501:M1000.
View 9 Replies View RelatedI have recently been advised to eliminate goto statements. While I have not had any trouble with them so far, it is my understanding that a different structure will speed up my macro, which never hurts. Here I have printed a recent macro I wrote with two goto statements in it heart. Could someone show me how they would rewrite this bit of code while still getting the same results? Here the code compares the active cell value against B and if it does not match, it goes to the next value and compares. If it goes through more than 100 searchs and the term is not found, then it has checked the whole list and needs to stop search, thus the progression of C. A few options are offered before closing down the macro, but ultimtaly, C needs to get to 100 to exit the sub. Thus the goto Alpha that repeats the addition to C.
Alpha:
If ActiveCell.Value CStr(B) Then
ActiveCell.Offset(1, 0).Select
If ActiveCell.Value = "" Then GoTo Beta
C = C + 1
If C = 100 Then
I = MsgBox("Complete. Do you want to continue with Received data?", vbYesNo)
If I = vbYes Then
Windows(D).Close
Call ReceivedDataUpdate
GoTo Epsilon
End If
i know the keyboard shortcut for doing this is End + arrow key... but wat if there are value in between for example
Cat..""..""..""..""..""..""..""..5..""..""
hitting the End + arrow key from the very end will move selection to value 5...
there are empty spaces in between..
1. is there a way to convert the blank spaces in excel to 0 as default value.
2. is there any other keyboard shortcut key to reach to Cat without inturrupting 5 in between..
What I want todo is When a sheet is not found to go to another module and keep running the macro.
If Not SheetExiste("10x1") Then GoTo
NextModule
Else
Sheets("10x1").Activate
End If
Function SheetExiste(SheetName As String) As Boolean
' returns TRUE if the sheet exists in the active workbook
SheetExists = False
On Error GoTo NoSuchSheet
If Len(Sheets(SheetName).Name) > 0 Then
SheetExists = True
Exit Function
End If
NoSuchSheet:
End Function
I am selecting cells from a range by using "SpecialCells" and need to determine whether this produces an error (as it does in the event that there are no cells that fit the criteria) so I write
On Error Resume Next
Then I check the error number and if it is not 0 the next line of code is skipped.
Within the same procedure I do this again, but on a different range and need to check the error number again.
If no error is found, the previous error number will be kept so before running the second piece of code, I add the line
Err.Clear
Is their any difference between this approach or using the line
On Error Goto 0
I want to write a simple macro that does the following.
If cell A1 = YES goto cell A1000
If cell A1 = NO goto cell B1000
If cell A1 = MAYBE goto cell C1000
I will have the 3 options available via a combobox
i have this:
Sheets("Sheet2").Application.Goto Reference:="R1C1"
it is supposed to go to cell A1 in Sheet2.
but it doesn't go to sheet 2?
I am writing a macro that goes from one sheet to another sheet to copy data but then must return to the 1st sheet to paste it.
Is there a command for returning to a previous sheet.
Note that the sheets may not necessarily be in consecutive order ie. the 2nd sht may not be immediately after the 1st sheet in the sheet tab order.
The spreadsheet will be made up of a number of sheets that can use the same macro to reference a master sheet to copy and return data.
I am trying to click one 1 cell, which will automatically use a lookup of the cell values and find the correct sheet to go to.
All of this using VBA.
I have a spreadsheet where I had a new column on a daily basis. I am trying to create a macro to automate some parts of this. I would like to select the next blank cell on row 1. So in this instance, cell M1, however the following day it would be N1. This is the part I am unsure of how to do. After this I will be doing a vlookup to add the new values, which I should be able to sort out no problem.
I have seen people using COUNT and OFFSET to select the last cell +1, however I am unsure how to link to two together.
I have a multi- sheet Excel workbook and I need to develop a macro based control that, with a single click of a Button in a sheet named REPORT, will take me directly to the last empty cell in column A of a sheet named REGISTER in the same workbook.
View 2 Replies View RelatedI have designed a workbook for a reservation planner which lists all production reservations over the whole year. Because of the limitations in columns, I have had to split up the workbook into 3 worksheets. I have a quick links section (52 command buttons) which redirects the user via macro to the specific week they require....
Sub Week12()
Application.Goto Reference:="R6C256"
Application.Goto Reference:="R6C118"
End Sub
The first split is at week 17 which is on sheet2. I am working far too hard at the moment and I cannot figure how to go to the sheet in addition to the cell references as above.
Based on the value (month) picked from a dropdown list, I want to go to the specific range of that month in the same worksheet.
Attached you can find a sample sheet. Map1.xlsx
When I select a range of cells (not col or row headers), then use Find & Select | Goto Special | Blanks, the program keeps saying "no cells were found."
Excel 2010
ABCDEFGH1
1/2/20121/3/20121/4/20121/5/20121/6/20121/7/20121/8/2012200
0
[Code]...
I want is when Enter is pressed on Range Name =Match then, Goto Cell U3
To clearify what i need is when enter is pressed on any Single Cell belonging to the Range given the name "Match" then, Goto Cell U3...
why i'm getting this run time error :"Method 'goto' Of Object 'Application' Failed"?
Sub SynchSheets()
Dim wSheet As Worksheet
Dim rRange As Range
Dim dZoom As Double
Dim wSheetStart As Worksheet
Set wSheetStart = ActiveSheet
Application. ScreenUpdating = False
With ActiveWindow
Set rRange = .VisibleRange.Cells(1, 1)
dZoom = .Zoom
End With