Err.Clear V On Error Goto 0
Jan 1, 2010
I am selecting cells from a range by using "SpecialCells" and need to determine whether this produces an error (as it does in the event that there are no cells that fit the criteria) so I write
On Error Resume Next
Then I check the error number and if it is not 0 the next line of code is skipped.
Within the same procedure I do this again, but on a different range and need to check the error number again.
If no error is found, the previous error number will be kept so before running the second piece of code, I add the line
Err.Clear
Is their any difference between this approach or using the line
On Error Goto 0
View 9 Replies
ADVERTISEMENT
Oct 8, 2008
I have written a Excel (2003) that searches a worksheet for a string in any cell. If the string is not found, it uses the 'On Error GoTo' command to jump to a given label. It works fine on the first string not found. When it searches for the next non-existent string, it fails with:
'Run-time error '91':
Object variable or With block variable not set'
Do I have to clear a buffer after each cells.find search?
My
View 7 Replies
View Related
Mar 16, 2009
I have some coding under the property list command button which filters the date 3 times and copies the filtered data to another sheet. This works with data in the sheet, however if there is no data on the sheet I get an error message.
There is a line that says on error goto reset1 on the first filter and goto reset2 on second filter (and so on) which works on the first filter but not on the second or third filter. I have attached the file.
View 2 Replies
View Related
Jun 29, 2006
error handling ?what actually does the following do...? On Error Goto 0
View 2 Replies
View Related
Oct 10, 2008
I'm using a on error goto approach, heres the code.
View 2 Replies
View Related
Dec 23, 2006
why the On Error GoTo statement only executes the first time an error occurs in the following
On Error GoTo CubeNotFound
For x = 2 To TotalRecords
Cells.Find(What:=WSID, After:=ActiveCell, LookIn:=xlFormulas, LookAt:=xlWhole, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False, SearchFormat:=False).Activate
'Other actions are located here, but have been removed. These actions take place if the Find is succesful.
CubeNotFound:
Message = MsgBox("WS ID " & WSID & " was not found! Excel will continue with the next WS ID.", vbOKOnly, "WS ID NOT FOUND")
Next x
I have that statement there because if WS ID is not found then VB generates an error that the user won't be able to interpret, and also stops the code. I want VB to continue to the next record if one is not found.
View 9 Replies
View Related
Aug 10, 2012
I have some code below. I have error handling in place for when it tries to open a specific file. If it isn't there then user has option to continue and ignore this file, or browse and select a new one.
The problem is, when the user wants to ignore the file, the "Resume Next" continues to run the VBA assuming the file was ok i.e. the code after the line to open the file. What I would like is for it to skip the succeeding code and go to look for the next file.
Below is the VBA:
Code:
For i = 0 To 2 Step 1
'add in error handling for if the file is missing
On Error GoTo MissingFile
Workbooks.Open Filename:="\hbeu.adroot.hsbcdfsrootgb002hfcfinance01fnce" & qfolder & "Data" & qfile(i), UpdateLinks:=False, ReadOnly:=True
[Code] .........
Missing File:
qMissingPrompt = "There was an error opening data file. Click OK to browse or Cancel to ignore and move to next file"
qAns = MsgBox(qMissingPrompt, vbOKCancel)
'click cancel - ignore error and move onto the next file
If qAns = vbCancel Then
[Code] .......
So, where it says Resume Next, currently it will start running the following (after On Error Goto 0)
Code:
Set datawb = ActiveWorkbook
range("A2").Select
Do Until ActiveCell.Value = ""
etc.
What I would like it to do is go back to is to go to the next i
Code:
For i = 0 To 2 Step 1
Or even to go to the 'Next' statement at the end so that it moves onto the Next i and tries to open the next file.
View 2 Replies
View Related
Nov 7, 2007
i've got an error trap built in with "On Error Goto 40", but F8 on the very next line produces Runtime '9' error pop-up. Trying to check if sheet exists based upon value in A1 (number stored as text). If it doesn't exist, line 40 (and subsequent) creates it, looping back to the next value in column A and repeating. 1 time out of 10 it works perfectly,
View 9 Replies
View Related
Jul 2, 2008
I am using VBA in conjunction with an application called Quick Keys (basically software that allows you to program key strokes) ... and with this current project of mine ... I keep getting one of the following two errors:
"Cannot empty the clipboard" OR "Cannot clear the clipboard"
So I Googled, and based on the results it seems it is a VBA related error!
View 9 Replies
View Related
Jun 19, 2008
I am trying to write a macro to find all cells that are returning cell errors (ie: #REF!) within a named range, to select only those cells, and then to clear the contents of only these cells. It is my understanding that replacing or altering the value is not an option because doing so will return a "" string value, instead of a clear cell. Replacing the cell's contents with a =na() is also unacceptable...these cells to be completely clear. I was unable to piece together a macro from searching around this site and thought it would be best to just ask.
View 4 Replies
View Related
Oct 24, 2006
On a userform, I have a listbox named "eList" containing Employee Names.
I have 2 other listboxes named "List_eTrained" and "List_eNotTrained" which list the Training completed and Training not yet completed for the selected Employee.
When I click Name items, it updates both listboxes with information (using "AddItem").
Before it updates, I use this code to clear the info listbox items:
TrainingDetails.List_eTrained.Clear
TrainingDetails.List_eNotTrained.Clear
When I run the form and click on various entries, it works as expected. At random though, I get this:
Run-time error '-2147467259 (80004005)':
Unspecified error.
And only this line is highlighted in Debug mode: TrainingDetails.List_eNotTrained.Clear
Sometimes it happens after going through several names, sometimes it happens when clicking the 2nd or 3rd name. It's only happening on the "List_eNotTrained" line though--the other line is fine--which has me really puzzled.
I'm hoping someone else has run into this before and might know what's causing this random, unspecified error.....
View 6 Replies
View Related
Jun 13, 2014
I'm trying to use the "clear contents macro" for merge cell, but I keep receiving this "compile error : Expected End Sub" error.
FYI, I have named my merge cells to "myMergedCells"
[Code] .....
View 3 Replies
View Related
Jun 9, 2009
I have a macro which is copying data from several worksheets into one consolidation worksheet. When determining where to paste the data into the consolidation sheet, the macro includes some logic to find the last row that has data in it (using e.Range("A65536").End(xlUp).Row, where "e" is a variable holding the name of the consolidation worksheet).
Once all the data is on the consolidation worksheet, I have a second worksheet with formulas that link to the consolidation sheet. The issue I have is that the first step of my consolidation macro deletes all data on the consolidation sheet to ensure that no data is double-counted). I am deleting the data with logic that simply deletes all rows from 3 to 65536. Once these rows are deleted, Excel returns a #REF! error on my second worksheet which is linking back to this data.
Rather than deleting the rows on the consolidation sheet, I have tried using the Clear and/or ClearContents commands instead. This works (i.e., my formulas no longer error out), but results in the consolidation macro running very slowly (~15 minutes, compared to
View 9 Replies
View Related
Oct 24, 2008
How do I use the GoTo so that I can Specify A line of Code to go to...
for example
View 5 Replies
View Related
Feb 13, 2010
I have a drop down box linked to cell A2 for example, when the change is made on the drop down box the linked cell returns the value 1,2or 3. I'm not sure if I require a code or an 'IF' command - but what I would like to achieve is that say when 2 is selected I want to goto sheet 3 A1, if 3 is selected then sheet 3 A2 and if 1 then nothing happens. Or can I make the function dependant on what the drop down box displays e.g Correct, Not Correct and Requires Change. (1,2 and 3 respectively).
View 3 Replies
View Related
Feb 25, 2013
What I am trying to accomplish with the code below is that if sheet statusReport does not have any information on cell N2, then execute the code after NextLine:
If there is information then perform the Else statement and continue through the end of the code. However, I am getting an error of Else without If. If I remove the Else, then my the code below NextLine: does not execute.
I narrowed down the issue to the GoTo placement, but I don't know of any other way I can skip the For Loop after the If/Then statement. I tried doing an On Error, but there is no Error, the cell checks empty.
I am hitting a brick wall.
Code:
Sub copyeeInfoToClientSheets()
Application.ScreenUpdating = False
With Sheets("byEmployee")
Set rng = .Range("A2", .Range("A" & Rows.Count).End(xlUp))
End With
For Each WS In Sheets(Array("allEmployeesAnnualized", "allEmployeesHourly", "allEmployeesSalary"))
WS.Rows(7).Resize(rng.Count).Copy
rng.Copy Destination:=WS.Range("A6")
[code]....
View 1 Replies
View Related
Jul 10, 2008
I have a wicked wide spreadsheet that has 76 dates. These dates are in weekly increments. (IE 7/4, 7/11, 7/18)
I already have it set up to highlight the current week that I'm in, and there is an arrow above the column. Can I make a button to go to the current week? Like today, I would go to week 7/11.
I saw something with find.max, and give the date in Excels number format. Is this the right way to go?
View 9 Replies
View Related
Oct 31, 2008
i have this code that gives me 1st row of data , from Row 10 of every sheet in workbook, how can i modify to give me row 11 ,12,13,14,15,16 as well upto row 21 if there is Data in Col C ( max range is C10:C21) ,
For intX = 1 To Sheets.Count
For intY = LBound(arySkipSheets) To UBound(arySkipSheets)
If Sheets(intX).Name = "MachCapRpt" Or Sheets(intX).Name = "MachAdSht" Or Sheets(intX).Name = "Times" Or Sheets(intX).Name = "MachSchd" Then
Else
.Range("A" & intNextRow).Value = Sheets(intX).Name
.Range("B" & intNextRow).Value = Sheets(intX).Range("B10")
.Range("C" & intNextRow).Value = Sheets(intX).Range("C10")
.Range("D" & intNextRow).Value = Sheets(intX).Range("E10")
.Range("E" & intNextRow).Value = Sheets(intX).Range("H10")
.Range("F" & intNextRow).Value = Sheets(intX).Range("M10")
.Range("G" & intNextRow).Value = Sheets(intX).Range("W10")..............
View 9 Replies
View Related
Jul 23, 2009
I want to find the cell location of the largest value in a specific column.
for example: column C has 5 rows of different values : 5, 12, 4, 7,9 and I want to find the cell reference of the largest number which is 12.
I know that I need to use "Large" function in order to find the largest number, but what do I have to do in order to find the cell location of it?
View 9 Replies
View Related
Dec 3, 2008
I have this bit of code and I am curious why when the activecell is J29 it will not goto line 20 it just keeps running to the next line?
View 4 Replies
View Related
Dec 17, 2009
I have this code that works, except, for addressing with the Goto - I need to go to the CONTENTS (new row,column) of that location which is being changed elsewhere and I can't figure it out
View 6 Replies
View Related
Mar 7, 2007
I am trying to copy A1 into F8 only if F8 is empty, if not do nothing.
My code copy A1 into F8 regardless F8 is empty or not and overides my entry in F8.
Private Sub Worksheet_Activate()
If Len(F8) = 0 Then GoTo line1 Else GoTo line2
line1:
Range("A1").Copy
Range("F8").PasteSpecial Paste:=xlPasteAll, Operation:=xlNone, SkipBlanks:= _
False, Transpose:=False
Application.CutCopyMode = False
line2:
Exit Sub
End Sub
View 9 Replies
View Related
Feb 1, 2008
I have to copy and paste from 15 different worksheets to one worksheet each week. The size of each copy varies from 500 to 1000 rows and is sequential for each worksheet. In other words, if I am copying rows 1 to 500 this week, then next week I will copy from 501 to 1000. I would like to do this in a macro. I can easily figure the ranges each week by incrementing, and they can be listed in a workbook. Is there a way to copy that range into the macro as it is running? It would kind of be like saying the range to copy is '=B5' and B5 cell contains the script A501:M1000.
View 9 Replies
View Related
Jun 18, 2008
I have recently been advised to eliminate goto statements. While I have not had any trouble with them so far, it is my understanding that a different structure will speed up my macro, which never hurts. Here I have printed a recent macro I wrote with two goto statements in it heart. Could someone show me how they would rewrite this bit of code while still getting the same results? Here the code compares the active cell value against B and if it does not match, it goes to the next value and compares. If it goes through more than 100 searchs and the term is not found, then it has checked the whole list and needs to stop search, thus the progression of C. A few options are offered before closing down the macro, but ultimtaly, C needs to get to 100 to exit the sub. Thus the goto Alpha that repeats the addition to C.
Alpha:
If ActiveCell.Value CStr(B) Then
ActiveCell.Offset(1, 0).Select
If ActiveCell.Value = "" Then GoTo Beta
C = C + 1
If C = 100 Then
I = MsgBox("Complete. Do you want to continue with Received data?", vbYesNo)
If I = vbYes Then
Windows(D).Close
Call ReceivedDataUpdate
GoTo Epsilon
End If
View 9 Replies
View Related
Jul 22, 2008
Any way to do the following on a per sheet basis? ie: Sheet1 goto A4; Sheet2 goto G27?:
Private Sub Workbook_SheetActivate(ByVal Sh As Object)
Application.Goto Sh.Range("A1"), True
End Sub
This works to make them all go to the same cell, any ideas on a way to make them differ per sheet?
View 9 Replies
View Related
May 2, 2009
i know the keyboard shortcut for doing this is End + arrow key... but wat if there are value in between for example
Cat..""..""..""..""..""..""..""..5..""..""
hitting the End + arrow key from the very end will move selection to value 5...
there are empty spaces in between..
1. is there a way to convert the blank spaces in excel to 0 as default value.
2. is there any other keyboard shortcut key to reach to Cat without inturrupting 5 in between..
View 9 Replies
View Related
Sep 2, 2009
What I want todo is When a sheet is not found to go to another module and keep running the macro.
If Not SheetExiste("10x1") Then GoTo
NextModule
Else
Sheets("10x1").Activate
End If
Function SheetExiste(SheetName As String) As Boolean
' returns TRUE if the sheet exists in the active workbook
SheetExists = False
On Error GoTo NoSuchSheet
If Len(Sheets(SheetName).Name) > 0 Then
SheetExists = True
Exit Function
End If
NoSuchSheet:
End Function
View 9 Replies
View Related
Jan 19, 2010
I want to write a simple macro that does the following.
If cell A1 = YES goto cell A1000
If cell A1 = NO goto cell B1000
If cell A1 = MAYBE goto cell C1000
I will have the 3 options available via a combobox
View 9 Replies
View Related
Jul 9, 2006
i have this:
Sheets("Sheet2").Application.Goto Reference:="R1C1"
it is supposed to go to cell A1 in Sheet2.
but it doesn't go to sheet 2?
View 4 Replies
View Related
Apr 3, 2007
I am writing a macro that goes from one sheet to another sheet to copy data but then must return to the 1st sheet to paste it.
Is there a command for returning to a previous sheet.
Note that the sheets may not necessarily be in consecutive order ie. the 2nd sht may not be immediately after the 1st sheet in the sheet tab order.
The spreadsheet will be made up of a number of sheets that can use the same macro to reference a master sheet to copy and return data.
View 6 Replies
View Related
