I need to be able to move pagebreaks in Excel by means of VBA.
I have found an example in Excel Help (see below), but it doesn't work.
Sheets("Sheet1").HPageBreaks(1).Location = Sheets("Sheet1"). Range("A24")
I have 'sheet 1' (data collection sheet) and 'sheet 2' (form filling sheet)
I've recorded a macro which sends data from 'sheet 2' to 'sheet 1' (linked to a submit button on 'sheet 2')
I want the macro to allow the next form filled information to be transferred onto the next line down on 'sheet 1'.
The current code is:
[Code] ......
I have created a few macros and once I was happy that they worked independently I joined them to run as one macro in several steps. I have just discovered a bug ...
The macro filters on a column and copies and pastes that range into another sheet.
HOwever, sometimes (as I have just discovered) when it filters, there will be no data against the value it is looking for.
I need to say, if no value, move to next step.
I.e. here's my code. It's looking for ASIA and it will copy and paste all rows with Asia to another page. It then does the same for EMEA. Thing is, in my example just now, there was no EMEA data and some times there may be no ASIA data so I need to build in some rules that if it does not find either of these it continues to finish macro or pops up and says 'NO ASIA found, CLick to continue' or something?
Selection.AutoFilter
ActiveSheet.Range("$A$12:AA" & lngLast).AutoFilter Field:=27, Criteria1:="ASIA"
Range("A13:Z" & lngLast).Select
Selection.SpecialCells(xlCellTypeVisible).Select
Selection.Copy
Sheets("ASIA DETAIL ").Select
Range("A19").Select
[code]...
I have to issue template workbooks to people for budgeting purposes.
Within the workbooks are various numbers of worksheets pre -formatted and ready for these people to enter data.
Some of the data in the worksheets is important to them as individuals but not to me so I have a series of macros that lift the information from the worksheets and put it into a worksheet more specific to me.
Because the users are on the whole not that good with Excel I have put in easy to use look up tables and various proctections to stop them adding or deleting rows or columns as this plays havoc with my macros.
There is one thing I have "so far" been unable to do and I wondered if anyone could help.
Is there a macro that I could put somewhere in the workbook which would detect when someone tried to cut and paste and would either put up a message box or stop them doing this?
The reason being they are cutting from one row to another and this is messing up the calculations which are protected.
Is there also a way to stop them changing the name on the sheet tab in the smae way?
[Code] ...
This code works perfectly fine...however the column where i want to place. My vertical pagebreak is somewhat variable so I tried to use cell (shown below). However, when i tried running my code again it creates error?
[Code] ....
attached a sample, with the page settings, print area set, row height, etc... all set to my needs. I would like vba to adjust the horizontal pagebreaks so that a "box" is never split into two parts. in attached sample the pagebreaks should therefore go below row30, row54, row124 and row128. Setting pagebreaks is easy, but still want VBA to do it for me.
View 6 Replies View RelatedI have a report that shows 3 lines for each item. Is there a way to group sets of 3 rows together so they print on the same page so that it would insert a page break either before or after each set of 3 rows, not between them.
View 9 Replies View RelatedI could get a code to move a row from one area of a worksheet to another area on the same worksheet once a cell is tagged "Paid" via a refreshed macro. The updating data table starts on Row 3 for columns "B" - "R." The paid table starts on row 56 where column "B" always has a date in its cell.
View 7 Replies View RelatedI created a outstanding task worksheet in excel and I would like to move the completed jobs from this sheet to the second worksheet titled 'Completed Tasks'. The first worksheet is called 'Outstanding Tasks'.
I came up with a code to do this (see below). As you can see when I type "Y" into column G it moves the row into the second worksheet. It does this; however it puts it to the bottom of the table on the second worksheet where I would like it to be at the top. I also would like it to delete the row once it has moved it does this but then deletes the other row of information above it leaving blank rows on either side.
I simply want a code that moves the row of information to the second worksheet when I type Y into column G and then delete the row without messing with other information around it.
Private Sub Workbook_SheetChange(ByVal Sh As Object, ByVal Target As Range)
Dim rng As Range
Set rng = Target.Parent.Range("G5:G1000")
If Target.Count > 1 Then Exit Sub
If Intersect(Target, rng) Is Nothing Then Exit Sub
Select Case Target.Text
Case "Y"
Target.EntireRow.Cut Sheets("Completed Tasks").Cells(Rows.Count, "A").End(xlUp).Offset(1)
Selection.ListObject.ListRows(1).Delete
End Select
End Sub
the code to get my cursor to move down 1 row or cell without it actually referencing the chosen cell.
Is there a code to make the Cursor Movement direction to be set to move Left ?
View 2 Replies View RelatedI have a list of file names in Excel and I need to move the files from one folder into another. Sometimes I'm having to find and move hundreds of files into different destination folders, hence why I would like a macro. My spreadsheet will be something like:
Column A
Column B
Column C
Row 1
File name
[Code]...
I searched and found a couple of different active.sheet codes but could not get it to work. What I want to do is move the worksheet tab I create in the code below all the way to the end (right) of the worksheet tabs already in my workbook.
View 2 Replies View RelatedRight now I am at Column D; From E to I columns are hidden in my worksheet and would like to move to Column J.
View 7 Replies View RelatedI have a small problem that is more annoying than anything else. I have a command button that opens a userform, and the user can select a value and 'OK'. On 'OK', the code runs, however I would like the sheet 'Information' to remain visible until the code finishes and then switch to 'Task Intervals'. There is also a lot of screen flicker, despite selecting it off/on. I have included an Example file so that you can see the problem.
View 3 Replies View Relatedcoding that will select whatever data is entered in say Coulmn D & then copy it to the botom of another list in Column F.
The amount of rows with data in any of the colums may vary.
I need a code that will allow me to move data from a worksheet to a worksheet from which I came from. e.g. worksheet "Sheet 6" opens "Sheet 10", then after filling data in "Sheet 10" I need to move this data back to "Sheet 6" in the cells in range "F12 to F56". Please note that the data in "Sheet 10" is in the same range as in "Sheet 6"
View 1 Replies View RelatedI have this code that removes a group of cells on any row that contains "Y" in Column L, but it does not move the remaining group of cells on a row up after the cells are deleted.
VB code so that when a range of cells are deleted, the row(s) below are moved up?
Sub RemoveReceived()
LastRow = Cells(Rows.Count, "H").End(xlUp).Row 'change "H" to the column that determines which is the last row
For x = LastRow To 4 Step -1 'assuming it starts from row 4
If Cells(x, "L") = "Y" Then
Range("H" & x & ":K" & x).ClearContents ' or use Delete
[Code] ........
I would like to copy or move data from one worksheet to another automatically. I have one sheet (Data) with multiple pieces of data for specific individuals. I have several other sheets titled their last name. Can data for example from John Doe be copied to the sheet Doe and data for John Smith be copied to sheet Smith. In essence I would like the sheet to paste everything below John Doe to Doe's sheet and recognize the next name and past that into the next sheet and so on. It may be several different codes, Im ok with that.
One other item all cells do not have data I do need the blank cells copied as well at to not lose the formatting. There is also a blank 2 rows between each person.
If you need a copy of what the data looks like I can send it.
I want play a trick on someone and make a button move out of the way when they try to click on it. I think that this code is from VB6.0:
Private Sub CommandButton1_MouseMove(ByVal Button As Integer, ByVal Shift As Integer, ByVal X As Single, ByVal Y As Single)
CommandButton1.Move Rnd(100) * 4000, Rnd(100) * 4000, 1000, 1000
End Sub
In Excel, this code results in Run-time error '438': "Object doesn't support this property or method."
Is there a way to "move" a button in Excel VBA?
I'm trying to move my VBA programming to the next level and use more efficient code.
I'm wondering if there is a faster way to run the loop below, perhaps removing the 'For c = 2 to LastRow' as it seems a little clunky to me.
For c = 2 to LastRow
If Cells(c, Range("Product_Type").Column) = "" Then _
Cells(c, Range("Product_Type").Column).Interior.ColorIndex = 41
Next c
I've seen a similar thing somewhere where it was all done in one statement without the loop.
I want code to move the cursor to A788
But keep A788 in the top left corner on screen.
Is there easy code to help me accomplish this?
Also, Is there code that will take you to the first cell it finds closest to today's date.
Dates are in Column B.g
I have attached the sample file where I have noted what I want as a comment. I need to check for the value " Function Name: RF Pick" if this is there then the code should move 2 rows down check whether that row has the value " Each" if its there just move one row down and move the cells as I need in the output.
View 7 Replies View RelatedNeed way to interupt my code whilst the user selects a row. ie. if I wanted to move the contents of one row to another I would want to say: "select source row" (and want the user to click on any cell in that row) I could then put the rownumber in a variable with
View 2 Replies View RelatedI have been using Excel to create equipment lists for my work. The forum has helped me by creating a visual basic macro to create a 'final list' sheet compiled from the other source worksheets.
On my 'final list' sheet I need the first 10 rows to be left out of the macro’s so that I can add header information like job reference etc. I have tried altering the visual basic code by adjusting the row numbers in it so that it starts at row 10 but this keep's on producing error codes. This is due to my limited knowledege of what each line does.
I also wish to be able to paste new equipment into the final list sheet. When I do this at the moment the code does not recognise it is there and does not carry the information accross back into the source sheet. It is the same when I block select an area and delete the code does not recognise I have done this which is fustrating.
I have a macro which refreshes a query when the spreadsheet is opened. This works fine when online.
However, if the user is not online, the query is unable to refresh and the macro just hangs.
Is there a code which will enable me to say " if unable to refresh then move on to the next line"?
here's the code below.
Private Sub Workbook_Open()
Sheets("Houselist").Activate
Selection.QueryTable.Refresh BackgroundQuery:=False
Sheets("Front").Select
Range("A1").Select
End Sub
I have a work book with 6 worksheets, sheet2 is called Maersk, sheet3 Mariana, and so on ....
I need a macro so when I type Mariana in sheet1 g20 and hit enter it go's to Mariana sheet .....
I have a macro that is auto opening a form to be completed, but it currently opens on the first row of data that has been inputted.
How do I get the macro to move to a new row immediately to stop people from over-typing the first row of data?
I need a macro that I can assign to a button so that it will jump the screen to a particular cell. I want it to select the cell in a chosen column in the same row as the cursor already was. So, if I'm in M10 and I hit the AK button, it'll jump to AK10. If I'm in F54 and I hit the AK button it'll jump to AK54.
View 2 Replies View RelatedI am trying to create a macro to do the following (Microsoft Excel 2002 SP3):
1 - Select the text from the active/selected cell (i.e. B1)
2 - Cut the text from B1
3 - Move to the cell directly above the active/selected cell (i.e. A1)
4 - Add a space to the end of whatever text is in A1
5 - Paste the contents that were cut from B1 after the text and space in A1
6 - Delete the row where the text was cut from (i.e. entire row B)
I have never written code for macro's before, only done recording, but just can't seem to get this sequence to work .