I have a large spreedsheet like below and want to move "the "anytown, US" to the right of "1 Main Street" and delete blank rows. [I know a few ways to do the latter]
John Smith1 Main StreetAnytown, USJohn Smith1 Main StreetAnytown, US
I have an excel work book with 6 tabs. I would like to have Excel move an entire row from one tab to another tab (removing the row and inserting it in the other tab). I.e. Example I have a tab with items that are marked as "Open Actions" so if I were to change the drop down to close. Excel would move that entire row of actions to the tab with the "closed actions" and insert into the next available row. Now if someone were to come back at a later date say no it should be reopened than I would change the drop down to open and excel would move that row back to the open actions tab into next available row. I tried a PIVOT table and no good I played with few macro and not.
View 5 Replies View RelatedWill excel allow text to be permanently be positioned in a specific cell even if rows or columns are added?
View 6 Replies View RelatedI need to move data from columns B & C into A without losing current data in column A (see attachment). I'm sure I know how to do this but cannot for the life of me remember how.
View 5 Replies View RelatedI have a large database of customers. I would like to edit this database so that it only lists those customers that have an email address listed in that particular column. I can then save that as a separate list to upload to my marketing campaign.
Is there an easier way than just deleting entire rows at a time? About a 2,000 name list with maybe 30% having email addresses.
I have created a spreadsheet with 4820 rows of data (4821 for computational purposes, the last row being blank) with 5 columns.
1. every third row is blank and it needs to be removed (3, 6, 9,...4818, 4821). Once this is accomplished,
2. I need to move the data that is now found in the even rows, column E moved to the above, current odd row, column F. (ie. E2 to F1, E4 to F3, E6 to F5,...E4808 to F4807...,E4820 to F4819 (however it won't go this high). then
3. I need to delete all the current even rows, as the data I need will be in the odd rows.
This is similar to a previous post, in July, which was masterfully solved. I have tried to adapt the previous script, without success. Therefore,
I have copied data from a screen and entered it into Excel 2007, which is attached as 'snohomish sample.xlsx The data starts out (sheet 1) in 8 columns (A-H), and only in the odd rows (1, 3, 5, ...) What I wish to do is the following:
Move 'sheet 1 column B' to 'sheet 2 column A'. This is a date which needs to be in mm/dd/yyyy form.
Move the last 14 digits in 'sheet 1 column F' to 'sheet 2 column B'. This needs to be text so that I don't loose any of the zeros.
Move 'sheet 1 column E' to 'sheet 2 column C'.
Leave 'sheet 2 column D' blank as I will be entering a currency amount after running the module.
Move 'sheet 1 column A' to 'sheet 2 column E'. This also needs to be text as I can't loose any zeros or have it in scientific format.
The rest of the data on sheet 1 is not needed on sheet 2.
I will be entering data in 'sheet 2 columns F-K' after running the module.
I am attaching 'snohomish results.xlsx' which shows what I hope the results to look like (note the sample results are on sheet 1 of a different file).
I have a column of data that contains various blank cells where no data was measured. In the adjacent column I want to take the moving average of the last 4 data points including the most recent entry. My problem is i do not know how to handle blank cells where there was no data. I need it to average the last four in the column where data acutally exists. I am ok with using helper cells if needed and I am not worried about the first four results at this time.
Example data
A..................B
15
50
25
20................55
Blank............55
30................31.25
35................27.5
blank............27.5
blank............27.5
15................25
10................22.5
15................18.75
40................20
blank.............20
I am running Win XP and Excel 2003.
I have a macro I found here on the boards written by Lenze to delete an entire row based on what is found in column A. I would like to delete any row where Col. B contains 10 or less characters and I have modified it to do so (or at least I think it does). My problem is that it takes about 12 minutes to run the macro (I have about 50k lines to run through). I was wondering if this is the fastest method or if it examines things other than just column B.
Sub Test()
Dim i As Long
LR = Cells(Rows.Count, "B").End(xlUp).Row
For i = LR To 2 Step -1
If Len(Cells(i, "B")) < 11 Then Cells(i, "B").EntireRow.Delete
Next i
End Sub
After this runs, I am left with Columns A to somewhere around AH. The columns are generally in the format of text followed by a numeric column. An individual text column has the same name through all of the rows. The numeric columns have varied values whether negative or positive.
Ideally what I would like: If a given cell (ie. C2) in Row 2 is numeric, then copy the cell to the left (ie. B2) into (ie. C1) and then delete Column B. I need this to work for multiple columns from B to C, skip D and E, and then from F to AG (and maybe beyond).
Public Sub Delete_Blank_PO()
Dim iLastRow As Long
Dim Rng As Range
Dim r As Long
Dim x&
Sheets("ZF17.4").Activate
For x = Cells(Rows.Count, 2).End(xlUp).Row To 6 Step -1 '***set coumn 6 as range
With Cells(x, 6)
Select Case "" '.Value
I am looking to remove all blanks from a table I have and move all the data left. Right now the data is by date, and some dates are blank for some players (it is a basketball sheet) and filled for others, but I want to see it by game. So I have what is in the first table below, and I want it to look like what is in the second.
2-22-2014
2-21-2014
2-20-2014
2-19-2014
2-18-2014
[code].....
I've spent some time creating a module that speeds my every day tasks. I've set up Excel so that it is attached whenever I open a new spreadsheet ( Book.xlt). owever, I am frequently emailed spreadsheets from others and would like the functionality of my module without having ot import the module everytime. How do I force Excel to attach/import my module from my hard-drive to any Excel file I open? I understand naming conventions could come into play in the event someone emails me a spreadsheet that already has "Module1" attached. I'm sure I can come up with a unique name for my module should the automated import process actually be possible. How 'bout it folks?
View 6 Replies View RelatedIs there a way to delete comments in a selected range of blank cells?
View 7 Replies View RelatedHow do you delete rows automatically even if there are not an equal amount of rows in between the rows I want to auto delete?
View 3 Replies View RelatedI've a file with lots of data. In that file I've some blank rows, I want a code which search complete blank row and delete.
View 2 Replies View RelatedI am trying to write a macro which will delete all rows where cells in column B are blank. I am new to macros and since I have only been able to record them, I am having a tough time hand-writing this one.
View 9 Replies View RelatedI am able create a macro using the find function to find the next blank row, but I would like to have it select a range of rows down that I can then delete. Each time I run the macro the next blank row may be different thant the last, so it can't be a set number of row numbers each time. I could also possibly use the print area function if it would be easier.
Here is what I have so far, what is in red is where I need it to vary from next active blank row down to R2001C14, and then delete all the active blank rows ...
I am copying a range of rows from one sheet to another.
The rang consists of 11 rows; the first and last will always have data in them but the rest may or may not. Consequently, there are always a number of blank rows which I want to delete...
how to delete ALL the EMPTY/BLANK rows in an Excel sheet?
The sheet consisit of 18,000 rows.
I have this code that I have had for a while.. it works okay on my computer and does as intended... it deleted all empty rows in the selected range after checking to see if any cells contain anything that makes it look blank but isn't (it cleans those cells).
So on my computer it works... on a coworkers computer it converts every used cell in the usedrange to #VALUE...
In a rage of rows I have some rows that are blank - without any text or data. Is there a macro I might enter that will look at the range of rows, determine which are blank and then delete the blank rows?
I work with a spreadsheet every week to input values and subtotal them. These values change constantly and instead of going through and manually deleting each row in a 100+ row spreadsheet to be able to import into another program, I'm looking for an quicker way to keep my data in order but consolidate by getting rid of only the rows where both column A and B are blank.
Here's an example of what I'm working with:
5
10
15
20
50
2
4
6
8
20
This is what I need the final product to look like:
5
10
15
20
50
2
4
6
8
20
So I would like to quickly delete rows 2, 5, and 11. All of the other answers I've found only show how to delete rows based on empty cells in only 1 column. How can I quickly delete the rows where both columns are empty?
I have the following codes to delete all blank rows in column A
Dim lastrow As Long
lastrow = Sheet1.Range("A" & Rows.Count).End(xlUp).Row
MsgBox lastrow
With Sheet1
For t = 1 To lastrow
If Cells(t, 1) = "" Then
Rows(t).Delete
End If
Next t
End With
End Sub
Although it is working , it is not deleting all the blank rows at once, I have to keep pressing on the macro button running the macro several times, until all blank rows are completely deleted.
I can't modify my formula to leave blank cells blank when dragging it down, Also, I've got two formulas that i need to combine. Please view the comments I've put in cells E4, F2,F3,H2 and I2 to understand clearly what am seeking. See the attached worksheet.
View 8 Replies View RelatedI have one column that contains an If statement formula and would like the next column to then work off of the first column (i.e. if that 1st column returns a value then then adjacent column uses that result).
What is happening now is that it is returning #value (because I guess technically the cell isn't blank?)
I am looking for an IF statement that would leave a balance cell blank if both the revenue and expense cells are blank, otherwise a formula would be calculated.
View 8 Replies View RelatedI presume this is fairly simple to do, since it's certainly easy enough to do manually by filling in a couple of rows and dragging them down, but I need it to be performed in a macro that I can run before other macros run.
What I need specifically is for the macro to go to G1 and insert the number .01... Then go to G2 and insert .02... Then G3 and insert .03... And repeat this until it finds the first non-blank cell ( row number this occurs at varies), at which point it ends and does nothing to that populated cell or any other cell in the column thereafter (including other blanks farther down).
This all needs to be done in Arial, 10pt, white.
I have a list that looks something like this:
Column B
Row 4 Item 1
Row 5 Item 2
Row 6
Row 7
Row 8 Item 3
Row 9
Row 10 Item 4
Row 11
Row 12
Row 13
Row 14 Item 5
The range of cells in column B containing the items has a name "ColStreams"
I need to go through the list, filling in each blank cells with the value contained in the first non-blank cell above it - so, in this case, rows 6 and 7 would contain "Item 2", row 9 would contain "Item 3", rows 11-13 would contain "Item 4" and so on.
The formula below calculates appropriately, however, if any of the cells (E12,E14, E21, E22, E28, E29) are blank, it returns a #VALUE! error. I would like the cell to remain blank. How can I do this? The formula is listed below.
=(SUM(E34-E6)-(SUM((E12)+E14)-(SUM((E21)+E22)-(SUM(E28)+E29))))
I have 3 columns Z, AA, AB. The heading for Z1 is “A”, AA1 is “B” and AB1 is “C”
In column Z2:Z2000, there is a mix of A, B’s and C’s. I want A to stay in Z1 column, B’s to goto AA1 and C’s to goto AB1, also I want this added to a macro that I previously created, so everything happens with one push of a button
Now for save, not sure if this is possible or not, if I can have this added to the macro as well that would be great. When I push my macro button, the file saves to “Dec (today’s date) DB (81).xls” The number 81 is the total count of A, B’s C’s, this # will change depending on how may A, B’s and C’s there are. I really hope there is a way of doing all this
BEFORE
A B C
B
A
A
B
C
C
C
A
A
B
C
SHOULD LOOK LIKE THIS
AFTER
A----B-----C
----- B.....