I have successfully created validation code that operates as a command button. The code listed below identifies in a MultiPage UserForm non- null TextBoxes whose pair of associated OptionButtons have not been selected. (The TextBox and OptionButtons all lie within a Frame and their are 60+ sets of these throughout the UserForm.) A MessageBox alerts user to select one of the OptionButtons.
Private Sub CommandButton1_Click()
Dim cFrameT As Control
Dim cCtrlF() As Control
Dim pPage As Page
Dim cCtrl() As Control
Dim Num As Integer
Dim FNum As Integer
Dim vOpt As Boolean
Dim Opt() As String
Dim lPage As Long
Dim vFrame As String
Redim Opt(Num) As String
Redim cCtrl(FNum) As Control
Redim cCtrlF(Num) As Control
Num = 0
FNum = 0
' Loops through all Multipage pages
For lPage = 0 To Me.MultiPage1.Pages.Count - 1..............
Create a "search" userform that pulls data from a spreadsheet of raw data (hardware specs) and organizes it into a multipage control. Each page of the MultiPage has a different piece of hardware with simliar data entry categories (height, weight, calibration date for example).
Each page at the moment contains labels and textboxes only. The idea is to place data from the spreadsheet into these textboxes, and create new pages as needed during runtime.
My current issues: Just for testing/ debugging, I have a "_Change()" code that is triggered by changing pages within the Multipage. When I run the control, I trigger the change, but the textboxes and labels disappear.
I don't have much code to show, other than basic _Change() structure containing a msgbox for debugging.
This is related to a locked thread, where "imgUpdating" and "DoEvents" were referenced. I tried DoEvents, without success. I also don't know what "imgUpdating" is, but it sounds like it helped the other person with a similar issue:
I am in the process of creating a module to validate a MulitPage UserForm that is composed of, among other controls, multiple frames, each containing a TextBox and two OptionButtons. I need to identify those frames where the TextBox value is not null and neither of the OptionButtons have been selected. The module will pass as variables the TextBox value, OptionButton captions and Frame caption to another module that will create a UserForm with the invalid Frame/TextBox/OptionButtons sets for the user to correct.
The interim code listed below runs as a command button on a test UserForm. The MsgBox displays only the first of the OptionButton’s caption as Opt1 and Opt2. Can anyone tell me why and where I went awry?
Public WithEvents As MSforms.TextBox, Opt1 As String, Opt2 As String, vtxt As Long, vFrame As String, vTag As String Private Sub CommandButton1_Click()
Dim pPage As Page, cCont As Control, vCont As MSforms.Control 'Dim Opt1 As String, Opt2 As String, vtxt As Long, vFrame As String, vTag As String
Is there a more elegant way of accomplishing this? (Control Tags are already spoken for.)
I want to access the Properties of a number of controls in a running form, and these controls may or may not be contained in a Frame or a MultiPage.
In particular I want the Top and Left for these controls, which means I have to first find out if the control is contained in a Frame or MultiPage so I can get the reference for Top and Left. I'm ok with doing this for controls inside a Frame, but the MultiPage is eluding me. I get an error when I try to access these controls and it looks like they are actually owned by the individual Pages of the MultiPage.
how do I find out if a given control is contained in a given MultiPage?
I have a Userform which has a series of Frames that contain Option Buttons. What I would like to do is check that an option button in each of the frames has been selected. If there are any missing then I need to inform the user - I would like all frames to be checked at the same time on the click of a button.
I have the below code that I am using to find an empty textbox with the name FirstName. All it does is place the cursor in the FirstName text box if the textbox is empty, but doesn't really make it stand out. I was hoping to find a way to color the background of the textbox pink, or have it set up so it would stand out somehow.
I have the following code in a module that works fine for referencing a textbox on a page of a multipage on a userform, but I'm stumped trying to figure out how to reference the page object itself vs the multipage then referencing the page later. My code is:
Code: Dim a As MultiPage Set a = UserForm1.MultiPage1 a.Page2.P2_ScoreTotal.Value = (Val(a.Page2.P2_Q1_Score.Text) +
I am using Excel 2003. I need to make a mandatory field for TextBox1 on UserForm2. So if the user leaves TextBox1 "blank", then they are forced to enter in data into TextBox1.
I have 4 columns, If column B (Ref No) is filled in, the adjacent columns, C,D and E become mandatory and an input box pops up on screen one after the other for entry into each column.
My problem is that I require a drop down list and not a input box for the final column (status). So i have created a userform with a combobox dropdown. I am having problems connecting the combobox selection to the final column, and for the selected combobox item to go into the right cell like the input box entry currently does.
Attachment 53209test743.xls
I have attached a sheet and also you can see the code below.
Code in Sheet
VB: Public SaveVal1 Public SaveVal2 Public SaveVal3
Private Sub Worksheet_Change(ByVal Target As Excel.Range)
I'm having a problem setting the multipage tab on a userform in VB. It's kinda weird because the code was working fine until recently, where it's suddenly stopped working properly! The only thing I can think of is that I changed versions of Excel to v2003 recently.
I want to not let the user change tabs unless the inputs entered have been error checked. My code is:
Private Sub MultiPage1_Change()
If Me.MultiPage1.Value > 1 Then If Range("inputs!dob") = "" Then Me.MultiPage1.Value = 1 MsgBox ("Please enter your date of birth before continuing.") End If End If End Sub The tab itself changes fine (ie. shows the tab 1 header), but the contents of the tab are actually the contents of tab 2!
I'm trying to create a next button from one user form to another. But I can't reach there. I know that I have to use, multi page, but I don't know how!
Is there anyway to make the number of multipages you have respond to a previous fill in the Userform? Let's say you have a textbox asking for number of requests, if you type 4, there will be 4 multipages with the same fills.
I am trying to get a scrollbar on a MultiPage UserForm to provide instant results on the active spreadsheet. The spreadsheet is full of charts, and as you move the scrollbar, the charts change. Trouble is, the code I have is VERY slow. Moving the scollbar turns the cursor into an hourglass and that little scrollbar graphic lags about a centimeter behind. Is there faster code out there?
Here is what I have:
NOTE I use both the change event and the Scroll event because using only one gives me only half the functionality of the scrollbar...that is, without both, either the arrows on the scrollbar work or only the slider works.
Does anyone knows a simple way to insert a table on a MultiPage UserForm ?
This MultiPage appears on a excel spreadsheet when the user click on a button. I would like to put a table on one of the pages such that the user can fill in this table.
I know you don't usually print userforms & when you do I know the code, however, how can you print one page of a multipage userform when the page has a vertical scrollbar & you want to print the whole page, not just what is showing on screen?
I have a UserForm which has a multipage with 2 pages, each page has many controls and associated code. I now need to add a third page but cannot get the code supplied to work.
VB: Sub AddNewPage() Dim NewPage As Page Set NewPage = frmColEd.mpCust.Pages.Add(, , 2) NewPage.Caption = ThisWorkbook.Sheets(2).Text frmColEd.Show End Sub
frmColEd is the name of the user form and mpCust the name of the multipage on that user form. I keep getting a 'Type Mismatch' on the SetNewPage=.... line no matter how I change it.
I have two pages in the userform. What I was trying to do is that certain textbox (txtDate) needs to be entered on the page1 before going to page2. The user can still select page2 however I want the vba to bring the page back to page1 if the data is missing.
Here is the code:
Private Sub MultiPage1_Change() If MultiPage1.Value = 1 And txtDate = "" Then MultiPage1.Value = 0 txtDate .BackColor = &H40C0 End If
It didn't work completely - the tab selection on top was on page1 however all the controls shown are still the controls under page2. I have to manulally click page1.
I also tried MultiPage1.Page(0).Enabled=True but it didn't work either.
The code below works when the textbox (txtExt) is not within a multipage but doesn't when it is. I'm presuming i need to reference the multipage and page number but can't seem to get the right syntax.
Private Sub txtExt_Exit(ByVal Cancel As MSForms.ReturnBoolean) Details.Activate Dim agExt As String Dim extFind As Range agExt = txtExt.Value Data.Range("M3:M120").ClearContents With Details
Set extFind = Range("B1") For lCount = 1 To WorksheetFunction.CountIf(Columns(2), agExt) Set extFind = Details.Columns(2).Find(What:=agExt, After:=extFind, LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False) With extFind...................
I have a multipage on a userform and wanted to change the back color. I can change this color fin for buttons and the userform itself, but I don't see the option in the properties for a multipage. And I didn't see it as an available command from vba. Am I missing something here?
I've got a table in a worksheet. Every time the user double-clicks on one of the cells containing the names for each of the listed items, a userform pops up displaying information about that item. Besides other controls, this userform has an Image Box, that displays a picture of the item, and a Multipage.
What I want to do is to display the same picture shown by the Image Box, on to the Multipage, using the same file, but, and here's the quirk, aditionally, change it's size, turn it monochrome, and set its transparency to a different value.
I've attached an example of the final look I'm seeking. This was done by prior editing of a copy of the image and inserting it using LoadPicture, but this solution is too troublesome as this is done solely for aesthetical purposes, thus not justifying all the hassle a user has to go through everytime he wishes to add a new item to the table.
I've started experiencing a strange problem. The control toolbox keeps appearing when the first page on a multipage userform is activated. I can't figure out what's causing this, and after searching the forum, with no luck, I thought I would see if anybody else is experiencing the same problem, and how to fix it.
I am trying to figure out how to initialise a multipage userform. I have two worksheets, one with a contact 'database', and one temp that holds search results.
I understand how to load data from the worksheet and write it back using a single useform, but this is foxing me just a tad!
I have a spreadsheet with numerous check boxes. Everything looks great when I do a "print preview", but after I close the preview and return to the spreadsheet, a bunch of the check boxes have moved! Have I got a property improperly set, or is it something more sinister? I've looked all over, and can't find an explanation of what the various property settings mean...
I have a userform which has a number of multipage controls nested inside each. So, the parent is Multipage1 with 2 pages. Page 1 of Multipage1 has a second multipage control (Multipage2 which has 4 pages). In Multipage2, page1 there is a 3rd Multipage control (Multipage3 which has 2 pages). In Multipage2, page 2 there is another multipage control (Multipage4 which has 3 pages)...and so on! I know this sounds complicated, but I am trying to get the caption of the selected multipage.
There are commandbuttons in all of the pages, which when clicked need to return the caption name of the multipage where they sit.
I have started the following code, but suspect there must be a better solution:
VB:
With Sales If .MultiPage1.Value = 0 Then Hardware_Purchases_Input.TextBox6.Value = .MultiPage1.SelectedItem.Caption & " - " & .MultiPage2.SelectedItem.Caption & " - " & .MultiPage3.SelectedItem.Caption End If End With
I'm trying to create a userform to act as a walk-through for a process. I've settled on using a multipage to conserve the required screen real-estate, and break the process into natural 'stages'. I've happily got these stages fixed into the userform's pages, with a couple of command buttons running events OnClick - but cannot figure how to get the spinbutton to navigate between the pages.