I have the following code in a module that works fine for referencing a textbox on a page of a multipage on a userform, but I'm stumped trying to figure out how to reference the page object itself vs the multipage then referencing the page later. My code is:
Code:
Dim a As MultiPage
Set a = UserForm1.MultiPage1
a.Page2.P2_ScoreTotal.Value = (Val(a.Page2.P2_Q1_Score.Text) +
[Code]....
Can you run a procedure when a particular page in a multipgae control is clicked rather than use the Multipage change control.
View 5 Replies View RelatedWhat I'm trying to do:
Create a "search" userform that pulls data from a spreadsheet of raw data (hardware specs) and organizes it into a multipage control. Each page of the MultiPage has a different piece of hardware with simliar data entry categories (height, weight, calibration date for example).
Each page at the moment contains labels and textboxes only. The idea is to place data from the spreadsheet into these textboxes, and create new pages as needed during runtime.
My current issues:
Just for testing/ debugging, I have a "_Change()" code that is triggered by changing pages within the Multipage. When I run the control, I trigger the change, but the textboxes and labels disappear.
I don't have much code to show, other than basic _Change() structure containing a msgbox for debugging.
This is related to a locked thread, where "imgUpdating" and "DoEvents" were referenced. I tried DoEvents, without success. I also don't know what "imgUpdating" is, but it sounds like it helped the other person with a similar issue:
UserForm Controls not displaying at runtime
I am in the process of creating a module to validate a MulitPage UserForm that is composed of, among other controls, multiple frames, each containing a TextBox and two OptionButtons. I need to identify those frames where the TextBox value is not null and neither of the OptionButtons have been selected. The module will pass as variables the TextBox value, OptionButton captions and Frame caption to another module that will create a UserForm with the invalid Frame/TextBox/OptionButtons sets for the user to correct.
The interim code listed below runs as a command button on a test UserForm. The MsgBox displays only the first of the OptionButton’s caption as Opt1 and Opt2. Can anyone tell me why and where I went awry?
Public WithEvents As MSforms.TextBox, Opt1 As String, Opt2 As String, vtxt As Long, vFrame As String, vTag As String
Private Sub CommandButton1_Click()
Dim pPage As Page, cCont As Control, vCont As MSforms.Control
'Dim Opt1 As String, Opt2 As String, vtxt As Long, vFrame As String, vTag As String
Is there a more elegant way of accomplishing this? (Control Tags are already spoken for.)
I have successfully created validation code that operates as a command button. The code listed below identifies in a MultiPage UserForm non- null TextBoxes whose pair of associated OptionButtons have not been selected. (The TextBox and OptionButtons all lie within a Frame and their are 60+ sets of these throughout the UserForm.) A MessageBox alerts user to select one of the OptionButtons.
Private Sub CommandButton1_Click()
Dim cFrameT As Control
Dim cCtrlF() As Control
Dim pPage As Page
Dim cCtrl() As Control
Dim Num As Integer
Dim FNum As Integer
Dim vOpt As Boolean
Dim Opt() As String
Dim lPage As Long
Dim vFrame As String
Redim Opt(Num) As String
Redim cCtrl(FNum) As Control
Redim cCtrlF(Num) As Control
Num = 0
FNum = 0
' Loops through all Multipage pages
For lPage = 0 To Me.MultiPage1.Pages.Count - 1..............
The code below works when the textbox (txtExt) is not within a multipage but doesn't when it is. I'm presuming i need to reference the multipage and page number but can't seem to get the right syntax.
Private Sub txtExt_Exit(ByVal Cancel As MSForms.ReturnBoolean)
Details.Activate
Dim agExt As String
Dim extFind As Range
agExt = txtExt.Value
Data.Range("M3:M120").ClearContents
With Details
Set extFind = Range("B1")
For lCount = 1 To WorksheetFunction.CountIf(Columns(2), agExt)
Set extFind = Details.Columns(2).Find(What:=agExt, After:=extFind, LookIn:=xlValues, LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, MatchCase:=False)
With extFind...................
I want to access the Properties of a number of controls in a running form, and these controls may or may not be contained in a Frame or a MultiPage.
In particular I want the Top and Left for these controls, which means I have to first find out if the control is contained in a Frame or MultiPage so I can get the reference for Top and Left. I'm ok with doing this for controls inside a Frame, but the MultiPage is eluding me. I get an error when I try to access these controls and it looks like they are actually owned by the individual Pages of the MultiPage.
how do I find out if a given control is contained in a given MultiPage?
Validate UserForm MultiPage and Frame Controls
I have a multipage (say "Multipage1") in a userform. It has five different pages in it starting from page1 to page5.
When the userform is opened, I want to have a control as to which page is being displayed first.
eg: I want the page2 to be displayed when the userform is being opened.
I cannot make a correct variables syntax for MyMulti and sRngC.
How to make a correct syntax for this
Dim pa As Integer
Dim MyMulti As String
Sub MyMulti(iRow1 As Long, iCol1 As Long, iRow2 As Long, iCol2 As Long, _
iRow3 As Long, iCol3 As Long)
For pa = 1 To 7
Next pa
MyMulti = multi & pa
Dim sRngA As String
Dim sRngB As String
Dim sRngC As String
sRngA = Cells(iRow1, iCol1).Address & ":" & Cells(iRow2, iCol2).Address
sRngB = Cells(iRow3, iCol3).Address
sRngC = Page & pa
If Not ActiveCell.Formula = "=OR(All!" & sRngA & "=TRUE)" Then
Me.MultiPage1.sRngC.Visible = Range(sRngB).Value
Else
Me.MultiPage1.sRngC.Visible = ActiveCell.Formula = "=OR(All!" & sRngA & "=TRUE)"
End If
End Sub
sRngC should be Page1, Page2, etc.
I have a UserForm which has a multipage with 2 pages, each page has many controls and associated code. I now need to add a third page but cannot get the code supplied to work.
VB:
Sub AddNewPage() Dim NewPage As Page Set NewPage = frmColEd.mpCust.Pages.Add(, , 2) NewPage.Caption = ThisWorkbook.Sheets(2).Text frmColEd.Show End Sub
frmColEd is the name of the user form and mpCust the name of the multipage on that user form. I keep getting a 'Type Mismatch' on the SetNewPage=.... line no matter how I change it.
I have a userform1 with multipage 1 which has 5 pages. Is it possible to select page 1 from a label on page 5. I have the following code assigned to label 18 on Page 5 but I can't get to Page 1. In fact, the code does absolutely nothing.
Private Sub Label18_Click()
MultiPage1.Value = 0
End Sub
I have a UserForm with a MultiPage form on it. Page1 is a totals page with 3 TextBoxes. Page 2 and counting are item pages. Each page also has 3 TextBoxes (nutrients for that item).
Purpose is to add all of the values in the first TextBox on pages 2 + and place the total into the first TextBox on page 1. Repeat this for the other two TextBoxes.
The problem is that I have no way of knowing how many pages I will need!
Is there a way to add a new page to the MultiPage and copy all of the formatting and controls from the formerly last page on to it? I would like to do this with an "Add" button.
How can I tell (in code) which is the current tab selected on a MultiPage?
View 6 Replies View RelatedI have a MultiPage User Form, it has 2 tabs within the User Form.
I want to display Tab #1 (the first tab) as the 'visible/active' Tab for the user upon opening the user form. How do I do that?
Usually, I would open a User Form with frmMyForm.Show in a private module, to show the form. But now I have 2 Tabs, and want to select a certain Tab upon opening it?
I have a MultiPage userform and I'm adding (4) control buttons - CancelButton, BackButton, ForwardButton and FinishButton. On the first page, those names are fine but when I get to subsequent pages, I get an ambiguous error if I try to name the controls the same. But the code will all be the same. What am I missing? In an example that I have, the user was able to name all the controls with the same name. What setting would control that?
View 5 Replies View RelatedWhat are the differences/advantages to these 2 controls in a User Form?
I have already seen that the tab strip doesn't seem to toggle b/t pages, as a frame I placed remained on both "tabs" (I am wondering what it does if you can't toggle).
I retrieve data about local reservoirs (elevation, precipitation, gated release, ...) from a web site [url]. Retrieving the reports requires manipulating three drop boxes ("Select lake", "Year", "Data Type"). After that, I copy the data to the clipboard, and, back in Excel, push a button that pastes the text and extracts the data.
I'd like to programmatically manipulate those controls so that data retrieval can be completely automated.
I have a macro that uses subtotals on a dynamic list to generate page breaks by Department. Rows 1:6 of the table are set to print at the top of each page and column A is not set to print at all. Would it be possible to get cell B6 to return the value of the first cell of each page break (from column A) when the page prints. (Column A contains the department names, and though I don't want to print the column itself, I would like the name of each department to appear at the top of the page.)
View 6 Replies View RelatedWhen I view a sheet under Page Break Preview, it shows the Page numbers in the centre of the Page. While I am aware that it would not print the page number I was wondering if there is an option to remove/hide the page numbers.
View 3 Replies View RelatedI have some code that parses an html table. I want to put in error handling in case the format of the page changes or the internet page is unavailable. I am testing without an internet connection and the run time error is not being branched off to the error handler and is fatally ending the macro. This is true also if I raise an error manually.
Private Sub ParseInjuryPage()
On Error Goto ErrorHandl
Dim strPage As String
Dim webIE As SHDocVw.InternetExplorer
Dim myURL As String
Dim tableBeg As Long
Dim tableEnd As Long
Dim RowBeg As Long
Dim rowEnd As Long
Dim cellBeg As Long
Dim cellEnd As Long
Dim strBeg As Long
Dim strEnd As Long
Dim myCell As Range
Dim rowNum As Integer
With Sheets("INJ")
Set myCell = .Range("A2")
.Range("A:F").Value = vbNullString
rowNum = 2
Set webIE = New SHDocVw.InternetExplorer
myURL = "http://www.sportsline.com/nfl/injuries"
webIE.Navigate myURL
Do Until webIE.ReadyState = READYSTATE_COMPLETE
DoEvents
Loop
strPage = webIE.Document.body.innerhtml...................................
I suddenly can't adjust my page breaks in any Excel spreadsheet while in Page Break Preview. Is there some option to turn it on and off?
View 7 Replies View RelatedI have a sheet that changes the number of columns based on data from other sheets. This is the only sheet in the workbook that I will print out every day. I have it set right now to fit all columns on one page, however sometimes this will result in the bottom 1/3rd of the sheet not being used. If I use fit all rows on one page, then some of the columns will get cut off. Is there a way to scale in both directions? My guess is there is not, but I thought I would ask because it would work great for me if I could.
View 4 Replies View RelatedI have a report that I use and right now I have a command button that prints the report x2. What I would like to do is to have it print one in color and one in grayscale. I could do this I think with two different buttons, but I would like to utilize just one. I tried creating a macro but it did not pick up the fact that I changed the properties to black and white.
View 2 Replies View RelatedI am looking for a formula that will take data from one page and graph it on another page. The data I am trying to graph is arranged like so:
A B
1 q 2009.05.01
2 w 2009.05.02
3 w 2009.05.01
4 q 2009.05.01
I am looking for something that will look at column A and if the answer is "q" and then look at column B and if the answer is "2009.05.01" Excel will take that and count it in a specific cell on another page. In the case above, I want Excel to give me the answer of "2" in a designated cell.
Is it possible to Change Start Page Of Multi Page UserForm Based on 8 CommandButtons. on a WorkSheet, for example.
CommandButton1
UserForm1.MultiPage1.Value = 0
CommandButton2
UserForm1.MultiPage1.Value = 1
CommandButton3
UserForm1.MultiPage1.Value = 2
CommandButton4
UserForm1.MultiPage1.Value = 3
Could I use 1 multipage UserForm Instead of 8 UserFoms. Is it better to use 1 multipage UserForm with 8 pages or 8 UserForms. I dont know if this make sense or not?
I have a workbook that has 9 different tabs in it. Once all the information has been completed throughout the workbook, is there a code that could transfer specific data on each page to a different colum on that same page? I need to do this for 9 pages at one time. The information is listed differently on each page. I need to transfer data from the current data column to the previous data column once the entire workbook has been filed out.
View 2 Replies View Relatedhow to get rid of the page numbers that appear when using page break preview mode. The page numbers appear in large grey font in the middle of each page and sometimes makes it difficult to read cells. Can I use this view with all the same functionality without that one feature?
View 3 Replies View RelatedI need a macro that will print a hidden page that is linked to the page I have active.
It needs to be able to find the correct hidden page that corresponds to the active page because there are multilple pairs of the hidden/visible pages. The name of the hidden page is the same as the visible one with "printout" added to the end. When created, the sheet code names are sheetn and sheetm; n and m being consecutive numbers.
Working with 2000 Excel is bringing some new chalanges. I see things are done different. I am trying now to keep my header to repeat from page to page.
For example I have a header that may say something like:
People, numbers, date, ect. And there are so many new rows they go on for pages long. How can I keep my header on the top of each page when it prints out on paper.
Assume that calculation is set to automatic and not manual, then is every formula on a page updated when any value on the page is changed, or only when the values in the cells pertaining to a particular formula change?
For instance, if cells a1-a10 have values and in a11 is a sum a1-a10 formula, and in b1-b10 are values and a sum b1-b10 formula in b11, if I change a value in range b1-b10 but do not change any values in a1-a10,then as well as the formula in b11 updating will the formula in a11 recalculate or does excel keep track of which cells have changed and thus is aware that the formula in a11 does not need to be recalculated?
