conditional formatting with multiple criteria needs. I don't even know if it is possible but thought it just may be possible using VBA or some formula in conditional formatting. Please take a look at the sheet and let me know if it makes sense or if you need any further info.
View 9 RepliesI have a spreadsheet that contains a great deal of information, though most if it contains dates. There are some colums that contain the word "NEED" if i don't yet have the date to put in there, and the cell is yellow. What i want to do is set up conditional formatting to change the cell to pink if:
A)the cell contains the "Need"
and
B)The date in the corresponding row from column C is more than 15 days old.
Problem : Belgium has three types of phone numbers
##/###.##.## (if prefix is "02" or "03")
####/##.##.## (if prefix is "04##")
###/##.##.## (everything else)
depending on the prefix.
How can I put a conditional number formatting on a cell, so that it puts the input (eg. 025648595) in the correct format (in this case : 02/564.85.95, or something along these lines)?
so what will happen is that the number of rows will continuously increase as the groups of data (Labeled Group #) increases. The data within each group will vary from time to time so some groups may contain only one line while others may contain multiple lines. I have included an attachment that illustrates what I'm trying to achieve. When data is entered in Column A under "Q," the adjacent empty cells in Columns B-F (labeled "R"-"V") will turn red. This is the part I have (i.e. Group 2).
View 4 Replies View RelatedI would like to highlight cells is two conditions are met:Cell = 0Offset(0,-1)>0I tried the conditional format wizard and entered a formula: =IF(AND($J2=0,$I2>0)) But I keep receiving formual errors, which I understand, because it appears to be incomplete formula. But I am not sure what else I need to add to the formula in the conditional format wizard
View 2 Replies View RelatedIn the attached spreadsheet, the numbers in col A derived from another spreadsheet. The table D1:L21 is precaculated based on projection. I need 2 cells highlighted when they capture the number from the same row (col A). In another word, whenever the number from col A fall in between the 2 cells in the same row, they will be highlighted. Another condition is when it is smaller then 10 reps, the corresding cell in col D will be highlighted, as demonstrated in the attached table. I tried AND(E2<A2, F2>A2) but it didn't work. I also tried LARGE((E2:L2<A2)*(E2:L2),1) and similar SMALL function. They work as an array in normal excel, but not in the conditional formatting.
View 5 Replies View RelatedI am trying to fill a cell green if the current value > avg value and in red if < than avg value. I have tried to use conditional formatting but I cannot see where i can add additional rules. In any case here is what I am trying to do:
Daily Avg. Units:42
Avg Bgt. Units:7
The cell containing the number 42 is filled in green. If the figure was less than 7 it would have been red.
Why is there a hard limitation like this? Is there a way to go around it? By having a different format for the cells outside the 3 conditions I can get 4 different formats altogether, but that's not really that much.
View 14 Replies View RelatedI'm using Excel 2000 which has a limit of three conditions, I have 6. If you could just get me started, I still don't understand VBA enough to do this.
In cell A1, the color is set to red. I want A1 to turn green when all 6 conditions are met:
1. Cell B1 has a valid value from its pull down list, no other value, and not empty.
2. Cell B2 has an integer, no decimal places allowed, and not empty.
3. Cell B3 has a valid value from its pull down list, no other value, and not empty
4. Cell B4 is not empty.
5. Cell B5 has a three decimal place number greater than zero.
6. Cell B6 has a single letter from A-Z only.
I have tried it, and it isn't changing the cells when I test the macro. I'm obviously doing something wrong, but can't figure out what....
View 9 Replies View RelatedI want to be get a response of Red, Amber or Green depending on:
Red if
A1 = blank and;
A2 = blank and;
A3 (which is a date) = greater than or equal to todays date
Amber if
A1 = blank and;
A2 = blank and;
A3 (which is a date) = todays date plus 1.
Green if
A1 = blank and;
A2 = blank and;
A3 (which is a date) = greater than todays date plus 1.
I am using a drop down list in excel and want to conditional format the cells based on what is selected from the list. I can't use conditional formatting as I have more than 3 items in the list.
I am guessing VBA can help but am a complete novice so could use some handholding on what to do.
Idea is that if someone select "Good" from dropdown, cell becomes green, "Stable" is amber and so on.
Is it possible to apply confitional formatting on 6 conditions ...
View 9 Replies View RelatedI want to use conditional formatting for RAG reporting. I had done this by having Cell is R then the format would be RED, Cell is A, then yellow, etc...
However I would like to have a blank cell or N/a no format the cell at all-currently this is making the cells green.
Do I need to use Formula instead? and tips on how this could be written would be great as well.
I have a spreadsheet which I need more than 3 conditions to the formatting - is there anyway of doing this in VBA!!! Its for a holiday chart that i'm doing - some of the items they can enter into one cell is: B (Bank Holiday) / 1 (1 days holiday) / TR ( Training day) / SL (Study Leave) / 0.5 (half day hols) and more.
View 2 Replies View RelatedI am trying to colour cells depending on the text in the cell. The text includes letters and symbols (e.g. A+ or C). The problem is I have five different conditions and Excel will only let me set up three.
The conditions I require are:
Text: A+ or A Colour: Pink
Text: A- or B+ Colour: Light Orange
Text: B or B- Colour: Sea Green
Text: C+ or C Colour: Lavender
Text: C- or D Colour: Brown
Need to figure out a code for Conditional formatting to work for 4 cases. I dropped programming 5 yrs ago...have forgotten mostly everything but I know this can be done. What I need:
Range = entire sheet
Upon entering a date(X) anywhere in the row the date is calculated from today's date(Y) and if the date entered is -infinity to 30 then the entire row turns red. 31 to 60 days orange, 61 to 90 days yellow, 91 to 120 days green, 120+ nothing.
Basically Y-X.
Case <30 red row
Case 31-60 orange row
Case 61-90 Yellow row
Case 91-120 Green Row
121+ nothing.
I'm trying to add conditional formatting to a column of data but there are more than 3 conditions. Is there a way of increasing the number of conditions you are able to set using the conditional formatting wizard or, if not, is there a way of applying conditional formatting using VBA ?
View 3 Replies View RelatedI am running Excel 2003 and when I open the file, I get the error: Invalid procedure call or library. When I check the references, it has
Microsoft Excel 11.0 object library
Microsoft Office 11.0 object library
and I manually added
Microsoft Outlook 11.0 object library
Not only do I get the same error, but when I try to save, it just gives me the totally unhelpful error message: File not saved
I am trying to use conditional formatting for a cell; It is a cell using Validation; you can choose "Yes" or "No" from a list If the value is "Yes" the cell should be green, regardless of everything else But if the value is "No" it should turn red, but only if a choice in another cell is equal to "X". Otherwise it should be left without special formatting.
View 2 Replies View RelatedI am trying to do some conditional formatting to highlight rows based on several conditions, I don't know if this is possible, but these are the criteria:
AAPL
tt
10/1/2013 11:14:15
GOOG
ll
10/1/2013 11:14:20
[code].....
I want to highlight a row if:
- the difference in time value is < 20 seconds
- the first symbol column is the same
- at least one, but not all of the rows meeting the above criteria contains a value in the second column from a given list (in this example, say tt is on this list)
So if done properly the logic would highlight the first and third rows, but would highlight none if none of the values in column two match my list.
I think the test criteria would go something like this, however I know that there are problems with my row references.
=and(abs($C2-$C3:$C65536)<0.0003,$A2=$A3,match($A2,Sheet1!A:A,0)>0)
I have 5 formatting conditions that I need to add in my macro and have just recently found out that I can't have more than 3 in my version of Excel - DOH.
Anyway, some research has indicated that you can use something called select case to get round this?
I need to colour the range as follows:
The code below turns numbers and dates on my worksheets(1) to text priorities on my worksheets(3), I now need to color the cell backgrounds of the results on worksheets(3). With formulas I know I can conditional format up to 3 colors (or 4 utilising the background) but I am after 6. I also know that you will look at my code and laugh as I should have done the color coding with the initial commands, but I struggled with it for 2 days and simply couldn't get it to work.
In the VB below it all works off a command button and up to the third color it works however it then gets stuck and throws up a runtime error '1004' Application defined or object defined error. I did get around this before by recording macros and effectively sticking them together but it hasn't worked on this occasion...... any ideas??? (I hope I'm not breaking any rules by pasting the code directly in?)
I have a spreadrsheet (sample attached) which populates a calender due to columns on seperate sheets being filled with text and corresponding dates. I started using conditional formatting to highlight certain conditions but soon realised I need more than 3 so I tried looking into VBA - and failed.
All the cells in the calender have the 3 usual conditions associated to them but in addition I need to be able to colour individual cells if they contain certain phrases or parts of phrases like "BP" or "Current"
Can I have more than 3 conditions for the conditional formatting function?
View 9 Replies View RelatedI have a cell that I want changed to green (red 133 Green 180 Blue 0) if a line is considered active. As conditional formatting only allows 3 arguments, I need to perhaps code it?
Along the columns are cells that can change a row to active or inactive.
Here are my arguments.
If B5>1 .. row = active
If B5>1 & G5>1 .. row = inactive
If B5>1 & G5>1 & H5>1 .. row = active
If at any time L5>1 & M5="" .. row = inactive .. OR
If at any time Q5>1 & R5="" .. row = inactive .. BUT
If at any time L5>1 & M5>1 .. or .. Q5>1 & R5>1 .. row = active
then ..
If H5>1, M5>1, R5>1, T5>1 & AH5="", AJ5="", AL5="" .. row = active
so If at any time AH5>1 .. or .. AJ5>1 .. or .. AL5>1 .. row = inactive
I have a lot of data (regarding graffiti) in a table and all my formulas work well. But, because I sometimes make an error in two columns of data I sometimes get results that do not balance. I want to put in a conditional format (?Is there a better way?) that will highlight the error as I enter the data. Can you help please?
Using Excel 2003 (sp3) and no add ons. There are lots of identical rows, 5:400, making up a table. I will use row 10 as an example.
In column M there is a formula which may or may not give a visible result. (It's a measure of the number of days taken to clean the graffiti and will only hold a result if the job has been finished.) The result for "M10" will be a number between 0 and 5 90% of the time, but may creep up to 30. It may also leave the cell looking blank although the formula itself is still lurking out of sight.
A matching row of cells, O10:T10, have no formulas in them. I must manually enter a "w" or an "a" into ONE of these columns, depending on the graffiti location (Worthing or Adur) and property ownership (Columns for residential, commercial, council etc.)
So now the errors I need to flag up as I enter data are to ensure that M and O:T balance. There should always be a result in M if there is an entry somewhere in O:T and if there is an entry in M there must be an entry somewhere in O:T.
Sometimes I mistakenly put an entry in O:T even if there was no result in M. Sometimes there is a result in M and I fail to put an entry in O:T. I need to be alerted as this happens, if possible. It will save hours of trying to track down my data entry errors.
BUT, there is already one conditional format already in M. It highlights the cell if it goes over 5 days for cleaning. =ISNUMBER(M10)*(M10>5).
If you can help, thank you very much. I thank you, my wife thanks you for me not doing overtime trying to track down my errors, my boss's thank you for making me more efficient and other forum readers may thank you for helping them to improve their sheets.
I have a spreadsheet with data in columns A:K.
I want to be able to change font color for a row based on what is found in column J and K. In other words if J3 contains the letter M then row 3 should be Green. I know how to do this using conditional formating, however I have 2 problems.
First, I have 6 different conditions to meet.
Second, there is one more condition to meet. If the date in column K3 is older than todays date then row 3 should be turn Red regardless of what is found in column J3.
jamm
I am trying to use conditional formatting in Excel 2003 to indicate when certain tasks are overdue (by highlighting the cell in red). My problem is that I have multiple criteria. If my line item is a "priority" item, it is considered aged if not resolved after 2 days; if the line item is "routine", the item is not considered aged until after two weeks (14 days). My goal is:
1) I would like the "status" cell in column D (which says "open" or "closed") to turn red if the item is aged.
2) Aging depends on the "priority" status in column A .......
I'm looking for a formula to use with conditional formatting that highlights cells if any of more than 3 conditions is met. I saw it on this forum before, but I can't find it with a search. It was something like =or(condition1),or(condition2), etc.
View 9 Replies View Related