Multiple Combo Box Reference List But Remove Used Values
Aug 8, 2013
i have a list of 5 teams in a named range ("teams") within a worksheet.
On a userform I have 5 combo boxes.
What I would like to have is an easy way to remove a used name in the list for the next combo box.
i.e. someone selects team a in combobox1, combobox2 then has a list of team b,c,d and e. I'll be locking the combo boxes and writing code so the next one will unlock if the previous box is populated.
i also need this to work if someone puts team c in first combobox this then gets removed in combobox2 then in combobox2 they input team e then both these values are removed for combobox3.
only way I can think of doing it is creating a lot of named ranges and using a lot of if then code which I'd like to avoid.
I have 4 combo boxes that allow me to make selection from pivot tables. As you know in the pivot table there's the "All Selection" which does not exist in combo boxes (I think), so I created a macro to reset all the pivot tables with the "All" option selected in all of them. However the values in the combo boxes are not changing.
I have a combo box, from the control toolbar, that I have populated with a named range in the properties of the combo box. The items in the named range vary when an earlier combo box is selected. There are always at least 2 values populated in the named range, but can be as many as 22 values. What happens is when there are only 2 items in that range, the drop down list from the combo box shows 20 blank lines! I have been searching for how to "ignore empty cells" in this range, but cannot find it. The empty cells are always before and/or after the populated cells, if that helps. The range is updated via VBA, not formulas, if that is helpful as well.
I have 4 combo boxes with selectable options and several cells for inputting data into. I'm looking to create a reset button that returns combo box values back to the first one in the list and clears all cells at the same time. I've figured out the cell reset as follows;
List 1) Contains customer contact information, including an account number. These account numbers may be duplicated in the list.
List 2) Contains account numbers of customers who wish to be removed from the first list.
I need to remove the rows from the customers list (List 2) where the account numbers match, and also copy those to another list for review. So far, I can manually choose and run some code to remove one particular account number only (eg 123):
Set FoundCell = Range("A:A"). Find(What:="123") 'Locate information to remove Do Until FoundCell Is Nothing FoundCell.EntireRow.Copy Sheets(" Deleted List").Select
I have two worksheets, one which contains a list of workstation numbers, and another which contains all of the workstation numbers and additional information on the workstations in the company.
I want to remove all workstation numbers and their information which are not present on the first list from the second list.
In the first w.orksheet each workstation number is in a seperate row, and in column one (seperate cells).
In the second worksheet, each workstation number and its corresponding information is on the same row, and each different workstation is on a seperate row with its information.
So for a project I need to put together a list of Portuguese-speaking last names. So I have various sources where I copied from, so I have one column in excel where I put all that data. I sorted the data to be in the correct alphabetical order. But when I try to remove the duplicate values in that column is says it removed them but it didn't and when it does it leaves many behind. I have tried the trim function, and even formatting but nothing works. I attached the non-formatted and non-trimmed list, because it doesn't seem to be making a difference.
In sheet1, I have the borrowers and outstanding per employee. In the Area Avg sheet, I have the average borrowers and outstanding in each area as this is the standard for comparison (I got this through the subtotal function).
Now what I have to do is in sheet1, format(change the color) each cell under borrowers which is greater than the average of the relevant area. Since, (in my actual data) the name of the area may be duplicate in different regions, the reference value (average borrowers of the area) from "Area Avg" sheet has to be traced through multiple criteria which are: Division, Region and Area. The same also has to be done for outstanding but the solution can be provided for borrowers only.
I added a combo box to a worksheet and closed and saved it. But I don't want it amymore. I cannot delete it. I try right clicking it but nothing. The worksheet,(workbook) isn't protected.
This input is exported from a system we have and may vary in length and values from time to time.
What I want to do is pull all the data for specific currency pairs (probably for 5 of the 10+ currency pairs it displays) onto another worksheet. And for each tenor for that currency pair, i want to perform 10-20 lines of analysis on the next sheet.
So, if GBPUSD was a currency pair I was interested in, I would need 10-20 lines for GBPUSD 1w, 10-20 lines for GBPUSD 1m, 10-20 lines for GBPUSD 2m, etc.
How can I pull this? While maintaining flexibility so if the tenors, currencies, and # of lines change?
The goal here is to select the worksheets in one list box and transfer it to another. Multiple Selection is allowed. I am having 2 question i am struggling with.
Question 1 - When passing the sheet names from List Box 1 to List Box 2 (using Add button) i would like the selected items of List Box 1 to be deleted after transfer. I thought i could access this using the command below but it does not work properly -> error message.
Question 2 - When the user is done the ListBox 2 need to be stored. When I save then close my workbook and then reopen it, i would like to be able to access the selection that the user has made before closing the worksheet. How can I store the content of ListBox 2 to achieve such a result. I guess i could use a use a hidden Worksheet where i could store the selection into some cells but i would like to know if there is a pure VB solution.
Event Manager Status 1call A yellow 2sleep B yellow 3run C red 4jog D pink 5eat E pink 6call E yellow 7sleep F red
I need to output 4 unique Status before the event sleep. When I say unique it is compared to its previous status. So that would be [yellow,pink,red,yellow]. Notice that I could repeat yellow but not a sequential yellow. I cant use previous formula on listing unique values because I have reference point which is sleep, that i need to lookup from a huge pile of data, and i need a counter to move up. I tried vlookup with countif but i still have to define the max range. The data is huge and my menial skills are limited to excel.
I would like to be able to categorise some data by reference to a list of values e.g. How do I categorise a range of retail stores by turnover : Store A has a turnover of £8m and I have a range of turnover bands : 0 - 1M = category 1 1M - 5M = category 2 5M - 10M = category 3 > 10M = category 4 I would like to assign a category number based on a lookup against the banding table. I can do this with a formula consisting of nested if statements but that is very cumbersome and with large volumes of data it becomes very slow in recaulating all the formula.
I want to attempt to write a macro so that when the equipment type and criticality has been selected, a corresponding number of rows will disappear.
For example:
If Vac Pump and 1A are selected then all the rows from 70 downwards will be hidden, and if Filter Dryer and 2A are selected, then the rows from 6 to 38 and from 47 onwards will be hidden.
I have an excel worksheet which is having duplicate values in multiple columns, i want to remove those duplicates and should return unique values... how can i do that... My Excel Sheet looks below....
in the above table I need to the sum of WC for each Language code & batch no. eg. for Language "id" & batch 1 I need to get the SUM of WC corresponding to the criteria.
I am using the below array formula in G2 (that I then drag across) to show the score for all the times "mike" appears. I would like to match all the times "mike" OR "red" appears, so that the value in K2 is "99".
I have a worksheet in which Col. A contains the names of London boroughs and col. B contains the name of each Ward in that borough. I'd like to create a list (or combo) box showing all the London boroughs, and a second list (or combo) box which will show all the Wards for the Borough selected in the London list (combo) box. I'd also like the option to be able to select all the Wards for the borough selected so that they can be used in a chartgraph.
Basically i have a data compilation of the sales for each sales agent for each month. I'm trying to create a simple, controlled table where the user can just choose which Employee(List Box) and the Month(List Box) and it will display their TOTAL Sales, the catch is TOTAL sales will be the sum of sales from previous months up till the chosen month.
Example below.
How do I go about inputting the function in the TOTAL cell?
I would like my combo box list to change base on the value of A1. That is, I have its input range being B1:F1 - "Year 1", " Year 2" etc.
Example: -If cell A1 is the value "10" then the combo box default list item would be "Year 1" (which is cell "B1") -If cell A1 is the value "20" then the combo box default list item would be "Year 2" (which is cell "C1") ETC...
I have a list of combo boxes embedded on a worksheet and I would like to have them accessible through an array. I am an old VB 5 coder and this was a method I used very often and found it to be quite the time saver, but I cannot find a way to do this in excel.
Trying to create a drop down list using a combo box. Then, when i select an item on that list, it will bring me to the range of cells where that information is stored.
Is that possible? I have no VBA experiance at all.
