I have an excel worksheet which is having duplicate values in multiple columns, i want to remove those duplicates and should return unique values... how can i do that... My Excel Sheet looks below....
View 3 RepliesI'm using the code below to remove duplicate values from a column of cells, in this case column B.
[Code] ..........
The code works fine, but I'd now like to adapt this so I can remove the duplicates from columns B, C, D and F.
I've tried over the last few days different methods but recieve 'Debug' errors.
I am not sure if Excel is able to do this but basically I am looking to find out which rows have some duplicate values. I have just read this back and it doesn't make a great deal of sense so I have attached an example spreadsheet.
Basically I am looking to find if E1:G1 duplicates further on down the list, hope this makes a bit more sense with the example attached.
Trial Upload.xlsx
For my job I have to take hundreds of codes and compare them to other codes. For example, in column A I'll have 453 codes, in column B I'll have 352 and in column 97. I want to find common codes for all three columns. Sometimes, I'll have just two columns and sometimes it's multiple columns. I have tried a few formulas but nothing works that well. Any formulas or MACRO
View 6 Replies View Relatedi would like to paste multiple duplicate values from unique values. Is there any way to do it in excel??
Ex:
Table 1:
3MG_HUMAN453
3MG_HUMAN44
3MG_HUMAN953
A1AT_HUMAN285
A1AT_HUMAN76
A1AT_HUMAN234
A1AT_HUMAN653
A1CF_HUMAN96
A1CF_HUMAN23
A1CF_HUMAN765
A4_HUMAN 944
A4_HUMAN 23
A4_HUMAN 755
Unique table
3MG_HUMAN100
A1AT_HUMAN78.89
A1CF_HUMAN90
A4_HUMAN 98
I wanted to add new column with these values for table 1 including duplicates. this is sample data and i wanted to replace thousands of this type.
I have a data set which has 6 columns (and lots of rows). Every row is different but I want to aggregate them based on 4 fields and then find the average of the numerical column for the results. I basically want to Group based on 4 fields and find the average of the 5th field.
My initial approach was to introduce a column which is a combination of the 4 fields I want to group by, simply in the Excel file (=A2&B2&C2&D2) and then find duplicates of that. I have a solution for this in VBA but when importing new data sets in this method is very slow, so I want to be able to do the whole thing in VBA.
So for a project I need to put together a list of Portuguese-speaking last names. So I have various sources where I copied from, so I have one column in excel where I put all that data. I sorted the data to be in the correct alphabetical order. But when I try to remove the duplicate values in that column is says it removed them but it didn't and when it does it leaves many behind. I have tried the trim function, and even formatting but nothing works. I attached the non-formatted and non-trimmed list, because it doesn't seem to be making a difference.
View 3 Replies View RelatedColumn A has values increasing by 1 but not necessarily each row, i.e.
1 1 1 2 2 2 3 3 3 4 4 4 4 5 5 5 5 7 7 7 8 8 9 10 10 11 11 11 11 12 13 13 14 14 14
I have a listbox which I want to Initialize by listing these values but not duplicating them (so in this case it would contain 1-14). Here is the mindblowingly complicated code I currently have:
[Code].....
This gives me the list as it appears on the sheet but doesn't get rid of the duplicates for me.
So if I have the below array how can I remove the duplicate values?
myArray = Split(TextBox1.Value, Chr(13))
Is there a quick way to remove duplicate values from a ROW. The "Remove Duplicates" operation under the "Data" tab only works for a column selection and not a row selection.
One approach I am thinking about, is to transpose the row into a column, run "remove duplicates" and then transpose again into a row.
In worksheet named, " My Overview", if the total sales values are a zero in C47:C59 the consultant name is duplicated in B47:B59 because of the values being a zero in C47:C59. How can i have the formula not duplicate this?
View 3 Replies View RelatedI have this problem I have 4 columns which contain data. The first column is a list which contains random values from the third column. Now what i want to do is to pull the duplicate values from the second list without agitating the data from the 4th column because it is corresponding.In the example i have attached i would like to take the values from column A and find them in column F then extract them together with corresponding value from column G
View 9 Replies View RelatedI got 2 excel pivot tables with 2 columns.
Table 1 (Sheet 1) -- Column A and B - input
3
45
4
12
[Code].....
I want to compare both tables, finding the same Number on Column 1 for each table, and sum the values of column 2.
I need a User Defined Function (UDF) to Vlookup duplicate values in separate Columns.
I can't use an Array function as the data is huge and it takes lot of time to calculate.
I have attached a Input and the desired output in the file attached.
UDF_MACRO.xlsx
I just want to colour duplicate values but want to do it with this Dictionary method
Code:
Sub highlight_Dups()
Dim cell As Range
Dim rng As Range
Dim dict As Dictionary
[Code]....
I have a challenge related to a excel sheet we are using for personnel planning.
Vertically we have several projects with action items listed row by row in the following format:
- Project 1 xxxxxx
Project management
Project Engineering
Workshop
Shipping
Etc.
- Project 2 xxxxxx
Project management
Project Engineering
Workshop
Shipping
Etc.
Horisontaly on the columns we have dates, day by day for a year +
For each day we chose from a drop down who is assigned to the action item. The problem is when there are 30-40 + projects and each have 20-30 lines of ation items it is hard to get the overview and avoid double entry. I would use conditional formating to do this, but firstly each project is separated by a line containing different formulas and I would not like the conditional formation to change these cells, and at the same time to put this up manually for each row would take a long time since there are 365 + rows.
how a VBA code could solve this little challenge? IT would also be beneficial to have it do the check upon cell change, that way we would not need to manually run the VBA to check.
how i can set 'Data Validation' to stop me from entering duplicate values across multiple columns, i can set it for a single column i.e. A1 to A100 but i am after this but for something like A1 to H100.....?
I am currently using this formula in Data Validation:
=COUNTIF($A$1:$A$100,A1)=1
I need something to do this but for multiple columns.
How do I select certain columns for duplicate values? When I go to conditional formatting>highlight cells rules>duplicate values it checks the whole sheet which is 20 columns by 50000 rows and freezes the PC. I just want to select certain columns for duplicates, like C and AC.
View 9 Replies View RelatedI am trying to do a SUMIFS from a chart with duplicate values in rows and columns.
Data looks like this:
So this is basically sales of different products (columns) on different routes (Rows).
I want to add up a total for all the same kind of products eg. Magnum for each route eg. Local Top End.
I have unit measures that are converted across four columns (FT, SQFT, SQM and SQY).
THere are three units in rows (BOX, Skid and Roll). I am trying to identify in a column labeled "Duplicate Volume" with a formula stating "YES" if there are duplicate numbers (volumes) in any of the four conversion columns listed above. I tried to attach an excel file here but the system will not accept it. Hopefully the diagram i make below will be enough to understand the concept:
Unit Name FT SQFT SQM SQY Duplicate?
BOX 0 0 15 0
BOX 0 0 20 20 YES
Skid 0 10 10 10 YES
Skid 0 0 0 15
Roll 100 10 2 1.5
Roll 0 0 40 40 YES
I have over 50 thousand rows of this stuff...so looking at the data to decide if there are duplicates will not happen.
Any formula that i can put in the column titled "Duplicate" that can identify the duplicates with a "YES" in the cell where duplicates are found?
I'm on Excel 2003 and have a sheet to track people who have read my emails. I want to know the answers to the questions below. I've included a fake sample to show what I'm looking at. The number of cells in each column is much higher and not the same per column. I've tried variations of MATCH, VLOOKUP, SUMPRODUCT, etc. but haven't found a good way to set up a formula.....
View 6 Replies View RelatedI have searched the many forum solutions for duplicates however the ones I found relate to a single column. However what I would like to be able to do is starting from row 6 is to remove duplicates of multiples columns of a single worksheet, namely columns M, O, P, Q and R. Note some cells in each column are blank.
To clarify - it would firstly check for duplicates in column M, keeping just one of the rows of the duplicated value and removing entiely the row/rows of where the duplications appeared. Then go through each of the other four columns. of the worksheet doing the same for each of the other four columns.
Then after the duplicates are removed from all five columns provide a tally at the bottom of the worksheet of how many times a value now appears in the cells of each of repective columns.
I'm looking for a Conditional Formatting formula that will check two columns before highlighting the duplicate rows. I need it to be conditional formatting because I know nothing about writing macros or vba (what-ever that is?). Data is entered into Columns A, B, and C. I need to check both column A and C before it highlights the duplicates, based on those two columns. (The format only unique or duplicate values checks only one column.) I have attached an example, but this is just an example, as I have hundreds of lines to go through on the original. (For this example, Row 2 and Row 7 are the duplicates I need highlighted.)
View 3 Replies View RelatedI have 2 sheets that i need to find what the same valued cells are.
1 sheet has names and i need to find the rows where those same names are on the 2nd sheet.
The formats are different (upper-lower case) and there is additional text as part of the cells in the 2nd sheet. (i.e prod123.web.corp.com) and i just need to find the prod123 parts.
how to highlight in one rows and 3 column if there is a duplicate.. i have attached here as an example....NameMatch.xlsx
View 4 Replies View RelatedI am trying to tell the spreadsheet that if column G *and* column V are both identical to another row's column G and V, then the entire row is a duplicate and to highlight and delete it. I also want to record a macro of this process to apply to all spreadsheets.
Here are the tutorials I am looking at, but whatever I am doing is not working the way it is working for them.
Conditional Formatting, find duplicates with multiple columns [URL]...
I am highlighting cell A2, and under Conditional Formatting, I select "Formula Is" =SUM(COUNTIF($G:$G,G2),COUNTIF($V:$V,G2))>1
Then I select the format as light orange text, but it is only highlighting A2....
That is as far as I have gotten, and I still do not know how to go about deleting the duplicate entries. I have also read there are issues with recording a macro when trying to find duplicates using more than one column in the formula, but I have not gotten that far so I can't test it.
As is likely evident in my formula and process, I am not very experienced with Excel.
This is a very SMALL sample of the data I need to sort through. We have been using filters but the data is growning and becoming far too time consuming using the filter method.
The output I am looking to achieve is something like this, (any format is fine; whether in rows or columns)
SVR1
1.99.99.254
(2) CAT I (display how many CAT I for SVR1)
CAT I: 2011-B-44
CAT I: ST-5546
(2) CAT II (display how many CAT II for SVR1)
CAT II: 2011-B-52
CAT II: 2011-A-21
SVR2
2.5.2.333
(1) CAT I
CAT I: 2012-E-55
(1) CAT II
CAT II: 2011-A-21
COLUMN A, varies from SVR1-SVR1400 (cointains duplicates)
COLUMN B, IP matches SVR name (contains duplicates)
COLUMN C, will be either CAT I, CAT II, CATIII
COLUMN D, will contain duplicates
I have some history of using formulas and nested formulas but this one is really throwing me for a loop. It feels like Inception to me and I'm not really sure where to start!
A
B
C
D
SVR1
1.99.99.254
[Code] .....
From the following example:
A1 TAG B1 mileage
G10-1622 15246
G10-1622 15246
G10-1583 15246
G10-1622 28659
G10-1195 28659
G10-1622 28659
desired results
Enter tag in cell
G10-1662
Mileage
15246
15246
28659
28659
I would like to enter a particular TAG # in I5 and return all the mutiple associated data
See attached : tire2.0.xls
I have a workbook that has five worksheets listing warehouse inventory items. One worksheet for 2013, 2012, 2011, 2010 and 2009. In column b of each worksheet is a column B with a heading of "Item Number". There are hundreds of item numbers on each worksheet.
I would like to be able to find and highlight item numbers that appear in multiple years. Preferably color coded showing appears in five, four and three years. If that's too difficult than just items that appear in all five years. I tried conditional formatting, but have been unsuccessful.
Lastly, is there a way to list any duplicate item numbers on a new worksheet.
SM extract 8.21.2013 Cust-sample.xlsx
I want to highlight the cells under System Name (col 1) in sheet 1 that are found in Host (col 1) in sheet 2 "OCPtabvHost"
The text isnt in the same format in the 2nd sheet (it is lower case and has additional text). I need to find the duplicate roots