Changing Values Of Cells Based On Change Of One Cell Value
Jun 3, 2008
I am trying to do is to write a code that will change the values of cells B17:B25 to "false" when the user selects "true" from the drop-down box in cell B16.
Here 's my
Private Sub Worksheet_Change(ByVal Target As Range)
If Target.Address = "B16" Then
If Target.Value = "TRUE" Then
Range("B17:B25").FormulaR1C1 = "FALSE"
End If
End If
End Sub
This is not working! Nothing happens when I select "TRUE" in cell B16!
I would like to have a cell (A2) with "H" in it. then have another cell with something like =A2&"2" which would equal H2 and actually reference cell H2?
This may have been answered on here but can not seem to find it. My situation is I have values in A1,A2 & A3 that are like counter reading so the value is always changing. What I am looking to do is change the cell color if one of the values is over 500 from the other two values. Say A1 is 3000, A2 is 3250 and A3 is 3500. I would like the cell for A3 to change color.
I have the following code to update a pivot table:
Code: Dim pt As PivotTable Application.EnableCancelKey = xlDisabled For Each pt In ActiveWorkbook.Worksheets("sheet1").PivotTables pt.ChangePivotCache ActiveWorkbook.PivotCaches.Create _ (SourceType:=xlDatabase, SourceData:="source!R4C1:R33443C55" _ , Version:=xlPivotTableVersion10)
Next pt
the R33443 term is what will be changing, the columns and the starting row should stay the same. is there a way to instead of using R33443, to enable the range to be changed based on a cell value?
Based on the attached (much simplified) spreadsheet, I want the values in the green cells on the "Month" page (B6:B10) to vary depending on the value in the yellow cell (B4), and for these cells to to look up the relevant column in the "Full Year" page - i.e. if B4 (on "Month") = Jan, look up C6:C10 in "Full Year"; if B4 = Feb, look up D6:D10, and so on. I know I can nest IF functions in order to achieve this, but could be a bit messy. I'm sure there must be a simpler formula within Excel ... just don't know what it's called!
I need to fill 2 other cells with varying colours dependant on what is chosen within another cell.
I have a drop-down list in cell A2 to select either ON SITE, ACTIVE or CANCEL.
What I need then basically is... if A2 equals 'ON SITE' then fill other two cells (A3 and B1) GREEN if A2 equals 'ACTIVE' then fill other two cells (A3 and B1) YELLOW if A2 equals 'CANCEL' then fill other two cells (A3 and B1) RED
I have a calendar set up with dates going along P6:CU6. Column C9:C27 has various status' for the job such as "Complete" or "In Progress" etc. Next to that in rows D and E I have start and end dates for the job. What I am trying to do is change the fill colour of the empty cells that are in line with each job, so that between the correct dates they are the corresponding colour to the status. So a complete job on row 9 that started on 26/05/14 and finished on 28/05/14 would have three green cells along Q9, R9, and S9.
I have tried an IF/AND/OR statement which looks like this:
I am getting a #VALUE! data type error, I have tried reformatting the cells to various date formats but no luck so far. This could be because my dates are set up as =P6+1 etc. but I am not sure. The error only occurs when the cell falls within the dates, otherwise it remains blank.
I intend to hide the value in the cell and use conditional formatting to change the cell colour based on the hidden input.
Once this is working I also need to take weekends into account, column G has any 2 value combination of Y and N to say whether the employee is working Saturday, Sunday or both. Row 7 has a "1" value underneath every Saturday and a "2" underneath every Sunday. I can imagine how this would work but combining it with the above formula could be complicated.
I am trying to multiply a range of cells by a cell reference. The cells currently have hard coded values in them. I know with past special you can multiply a range of cells by a copied #. I want a similar function to that just instead of a copied cell its a cell reference. No VBA.
myColumnOne = Range("NPN").Column 'this is column B, NPN is a Named Range of B1 myColumnTwo = Range("NPCH").Column 'this is column E, NPCH is a Named Range of E1
using these variables I want to say
When data is entered into any cell in myColumnOne first check to see if this same data already exists in myColumnOne if it does then check to see if in the row where the data already exists, if the corresponding cell in myColumnTwo ISBLANK then MsgBox
if the corresponding cell in myColumnTwo is not blank, allow the data to be entered.
Green=if within the max min range [as specified by user] Amber=if the current value is less than the allowable slack level[again specified] red=if the current value is less than or more than the min or max respectively.
I need to write a condition in such a way that cell IF A1= "DBR","BPR","SLR","SKR" then change cell B1 to SPECIFIC COLOUR Each condition different colour. A1 values ("DBR","BPR","SLR","SKR") is a list of selectable values. if the condition is falls then B1 should be normal (white color cell) with 0 in it.
I want the order size to be colored red. If the most recent order is larger than the previous order, I want the order size to be colored blue. If the most recent order is the exact same size as the previous order, I want the order to be colored black.
How would I make code that would let me "remember" the previous order size and the most recent order size, and let me compare them to conditionally format the font?
What I have In Column B, I have the datesIn Column I, I have engineers name What I need I want a macro to generate Serial Nos. (1,2,3....... n) in column A If an only if the date in column B is today's date and the engineer's name matches with the PC's username
I want to change the fill color of all cells on my sheet, based on the value of one specific cell. In my sheet, I am using cell F1 as the trigger for the change. If the word Blue is in the cell, I want the background color of all cells to be Blue. Likewise for Red and Yellow as well. I don't believe conditional formatting can get this done, as all but the one cell (for this) will be empty.
I'm creating a project calendar in Excel and for each task I have a Start Date (A) and End Date (B) in adjacent cells. To the right are corresponding date cells like a timeline set up with 52 cells representing weeks of the year. I.e Week 1 (C) starts at 02 Jul 12, Week 2 (D) starts at 09 jul 12 etc. up to 24 Jun 14 (BF).
Start Date End date 02-Jul-12 09-Jul-12
[Code]......
When a start date and end date are entered in the respective columns, I need to have the color start on the cell for that range in the timeline and that color should carry out to the end date cell in the timeline. A bit like a Gantt chart but not to that detail.
Let's say I have column C blank, but every time it's filled in with something I want column A to be today's date and B to be current time. Unfortunately, the functions NOW() and TODAY() don't give me what I want. They get recalculated every time that I update the spreadsheet. Another thing that I can do is just press ctrl+shift+; to generate a non changing date/time, but I want it to happen automatically (being super lazy).
I am trying to create a formula that will change the cell color in a range of cells in the row. I want the color to change based on the information in a particular cell appearing on a different sheet. What sheet the information is on determines the color the cells change to.
Example: I have 4 sheets I am working with. We will call them A; B; C; and D. I would like the color of cells A5-I5 on sheet D to change to red when the information in cell A5 from Sheet D shows up in any cell in column A on sheet A. If the information from cell A5 sheet D appears in any cell in column A from Sheet B then the color will be yellow, etc.
Is it possible to format a row of cells (B7:KX7) depending on the value in column (G7:G1000) changing?
For example column G might have the following value entered into them.
A A A B B B C C C
So all the rows containing the letter A would be formatted one colour, then it would notice it changed to B and format all the rows with the letter B in, then C etc... The letters would always appear in blocks of 10 or more (representing students in a group) so it wouldn't go A,B,A,B,C,D,E
I am not bothered about the letter being tied to a certain colour, it just needs to change when the letter changes. I'd have no more than 10 different variables in this column, meaning no more than 10 different colours to format. Formatting would be black text with different coloured backgrounds.
Attached is the file i am working with. The table spanning from A:AA5:16 contains hours worked per day of the week with respect to the Project chosen from the drop down menus in A7:16. Cells in the range of F,K,O,R,U,X,AA7:16 total those hours worked on a daily basis. The table below should sum the total hours worked per day according to the Project selected in A19 from the drop down menu, with respect to the Project(s) chosen in cell range A7:16. For example, if i am looking for total hours worked Monday on Project RSB i select "RSB" from the drop down menu in cell A19, i want cell F18:19 to be the sum of cells A7 and A9, with respect to the Project selected from cells A7:16. If I select "FRG" from the drop down in cell A19, i want cell F18:19 to reflect the sum of cells F8 and F10.
I am creating a schedule to use for our helpdesk - it has pre-defined tasks that need to be assigned each day - easy enough to accomplish with a formula. And I've done this by using this similar formula on each line of the tasks (This first task is based on a manual entery into one field (B19)) =IF(AND(B6="Liz"),"Paul",IF(AND(B6="Paul"),"Mark",IF(AND(B6="Mark"),"Diane",IF(AND(B6="Diane"),"Jeff",IF(AND(B6="Jeff"),"Dan R",IF(AND(B6="Dan R"),"Chris",IF(AND(B6="Chris"),"Liz","")))))))
So, B4 is one task (phones) and the formula above (B6) is from another task (tickets) and then a third task (admin) looks at the value of B5 and uses the same formula above, etc.
However, I want to be able to change the value of a single cell, based on the (manual entry) value of another (out of task) series of cells (i.e. Sick (B35) & vacation (B36)) - and I don't want any of the other task cells(in the C cell series of 'tasks'), that are basically linked together by the value of the other cell, to change. Thus, in turn, would mean that the same person would now be in two different cells, and thus is creating a circular reference.
Let me spell this out a bit clearer. The first manual field is B19 - If I enter 'Chris' into this field, then field C5 matches it. Then field B6 uses the formula above to figure it's value; as does B7 thru B12. Now, If I put another manual entry into 'Sick' (B35), then I want whichever task that person is assigned to (for this example, we'll say I entered 'Jeff" into Sick, and Jeff happens to be on 'tickets' that day) to change to whoever is in cell B12 - but I don't want any of the other cells to change - but, since they are all dependant on each other, this doesn't seem like a possibility.
I've tried creating a count of names in the Sick or Vacation fields and then added this to the formula =IF(AND(C5="Liz", B38=0),"Paul",IF(AND(C5="Paul",B41=0),"Mark",IF(AND(C5="Mark",B40=0),"Diane",IF(AND(C5="Diane",B40=0),"Jeff",IF(AND(C5="Jeff",B43=0),"Dan R",IF(AND(C5="Dan R",B37=0),"Chris",IF(AND(C5="Chris",B45=0),"Liz",B12)))))))
B38 being Pauls count; B41 being Marks, etc - so as long as their count equals zero, they are 'eligible' to fill that slot. B12 is the last person on the schedule.
In the xls for each step I have 2 raws-planned and actual. Step planned duration is populated manually over the weeks.Before that row we have another reflecting the actual step status per week
I would like to find a way how cell reflecting the actual status of a step can be automatically populated (coulored) based on the colour/value of activities that are planned for that week and for that step.Activities are listed below the step and again have planned and actual row.
The rule should be : if for a week we have several activities all of them should be finished in order to have step stataus auto populated as green. If a single activity planned for that week is not done-then weekly step status should be red.
The activities for each step are grouped below the step. It seems that one of the difficult part in that request would be how formula will understand where starts and finishes the activities that belong to one step. To get that happen I placed a column showing step and another column where we activity.
What I want to achieve: those cells have number 1 ( in column E) , adjacent cell values ( In Column D) are copied to G12 in the following format:: Mark,Lark ( i.e. cell value , cell value, etc)
is it possible ( with a command button) Sample attached
I am looking for a way for Excel to fill in cells in a column that has data sporadically in it. I am importing a text file into excel and saving it as an Excel file.
In the example attached, I need the numbers filled in all the way down to the next number. I don't care about the text, just the numbers. I realize I can copy and paste, but these files can be several hundred rows long and it seems there should be a better way.
I have 50 share returns for 2009 (A2:A51). I am solving for optimal portfolio by allocating weights to my 50 shares in 2009. in solver, i am changing cells B2:B51, but the criteria is that if any of the 2009 returns is greater than 75 then the weight on that share should be 0. i tried to write an if function in column C of the changing cells but solver overrides the command when i solve.
I have a spreadsheet with numerical data in B1:B11 and textual data in C1:C11. The numerical data is a couple of digits, nothing big, and the textual data is always two letters, in this case AB, AC or AD. I have the options for AB, AC or AD for each of the cells in C1:C11 in a data validation drop down list. What I'm trying to do is make a VBA macro, of some sort, that acts upon when, AB for instance, is changed to AC, and then multiply the adjacent numerical value in the B column by a conversion value:
AB -> AC = 3 AC -> AD = 7 AD -> AB = 4
So for example, if I had cell B2 as 10 and C2 as AB, then changed AB to AC using the drop down menu, the macro would recognise the change, select the adjacent cell, B2, and multiply it by 3 to get 30, and put 30 in B2.
This is what I've got so far, and I'm no VBA expert, so I've probably made mistakes in multiple places. At the moment, the code below is getting stuck on active.celloffset - and I'm really not sure why. I did manage to get it working with specific cells rather than a range, but that only ever worked once and I had to close and re-open excel to get it to work again. Is my code any good, or am I coming at this from the wrong direction?
Code: Private Sub Worksheet_Change(ByVal Target As Range) Code: Static ov As Variant For Each Cell In Range("B1:B10")
