I am making a simple database worksheet for the junior. The first thing we need to re-define the new "size" of the database to do some future calculations. I write some code in workbook open to initiate the name area:
when the junior re-open the workbook after closed, the size of the database
does not growth to a new area even junior add rows of data before close. It seems the currentregion does not work, I've tested it in VBE by press " F8".......
I am having a hard time creating my ultimate gradebook. Right now, I am able to hide a SPECIFIC table on a SPECIFIC worksheet using the following code on a macro button:
VB : Sub HideRow()Range("Table2[#All]").EntireRow.Hidden = True End Sub
The problem is that this sheet will be a template and as a new user inserts a new sheet, I would like to copy and paste this template to each new sheet. Since the Table values change with each new sheet, code wont work on the new tables. How I can name each new sheets table "Class Data", and the macro button to hide will work on each respective sheet?
I need to name a dynamic range of cells. The only constant is the column - H, and the heading "MRC".
MRC column in a table represents an array formula. Unknown is the row where it is going to show up and the number of rows that this array formula will take. I need to name this range (active cells based on the array formula) but do not know what row does it start with and how many rows will it take.
It is not the last table in column H either but there are 2 empty rows before the next table.
Trying something like that...
========================= Set aCell = Range("H:H").Find(What:="MRC", LookIn:=xlValues, _ LookAt:=xlPart, SearchOrder:=xlByRows, SearchDirection:=xlNext, _ MatchCase:=False, SearchFormat:=False) If Not aCell Is Nothing Then
I am looking to create a dynamic bubble chart. To do this I am using offset to create the series formula which without listing all the data names turns out to be something like this (where 297 will adjust to the number of rows with data): =SERIES(Project!$A$5:$A$297, Project!$J$5:$J$297,Project!$P$5:$P$297,2,Project!$Q$5:$Q$297)
My problem is that by creating the chart in this fassion I am unable to get a unique name for each data point. For example, if row A looks like this,
A5: 1 A6: 2 A7: 3
each data point will be named 1 2 3. How do I either create a new series for each row dynamically or get the specific name from column A to associate with the correct data point?
I want to use the range in this code that works fine in one work book from sheet to sheet...
But i need it to run across 2 workbooks that are both open at the same time... The data its bringing back will be in a seperate workbook.
Sub zzzz() Sheets("Sheet2").Select Range("A3:M16").ClearContents
c = 3 'Paste Range Return Test x = Worksheets("sheet1").Cells(Rows.Count, 1).End(xlUp).Row 'data source For a = 1 To x If Worksheets("sheet1").Cells(a, 3) = Worksheets("sheet2").Range("a1") Then For b = 1 To 20 Cells(c, b) = Worksheets("sheet1").Cells(a, b) Next b c = c + 1 End If Next a 'Range("C3:C15,F3:F15,I3:I15").Select 'Selection.Delete Shift:=xlToLeft Range("A1").Select End Sub
A userform listbox places names in a column in Sheet2, starting with cell E1 and subsequent transfers from the listbox (which is multiselect) going to F1, G1 etc. There will be between 6 and 15 names in each case.
A seperate textbox is used to assign a number to each multiselection, this number is added to "Div" and placed in row 22 of the column to which the multiselection is transfered.
The text in this cell is used for other things later but I also want to use it to Name the range to which it refers. This name is then immediately used to populate another listbox in the userform, and will be used repeatedly later on in the project.
Here is the relavant snip of code that I have been trying to get to work but I get 'object required' for the ActiveWorkbook.Names.Add.......... line. I did manage to get rid of that once (can't recall how!!) but then the ListBox2,RowSource gave an error.
Set DvNm = Sheet2.Range("IV1").End(xlToLeft).Offset(21, 0) Set Rngc = Sheet2.Range("IV1").End(xlToLeft) Set Rngp = Sheet2.Range("D65536").End(xlUp).Offset(1, 0)
for a "dynamic" range name...i like the concept, but my data validation in a cell that references this "dynamic" range name (with the offset function) doesn't recognize all the values in the range
(when i just range name it, the data validation sees all the names, but not all when i use the offset...)
I have a range of data starting in C18, C17 is a label (DivsUsed) the number of rows can range from 1 to a few hundred.
I used the code below to name C18 onwards as a named range with the name DivsUsed and then to use this as a RowSource for a ListBox.
Private Sub UserForm_Initialize()
Dim rangeToName As Range 'Sheet2.Range("C18", Range("C65536").End(xlUp)).Name = "DivsUsed" Tried this too Set rangeToName = Sheet2.Range("C17", Range("C65536").End(xlUp)) rangeToName.CreateNames Top:=True ListBox2.RowSource = "DivsUsed" TextBox2.Value = Sheet2.Range("F2").Value 'This works ok End Sub
Both tries, and anything else I have tried, give the error " Method 'Range' of object _Worksheet failed".
i'm very new to excel formulas & statistics in general. i only need to calculate averages but am having trouble naming the range in my formulas
in the example below, i want to use the first column to determine the range of data for the mean calculation.... so, I am seeking the average of just the numbers which correspond w/ A only. Similarly, I will then want an average for numbers corresponding to B, and then to C, etc etc...
I am trying to name a Range in VBA with the following Case statement.
Select Case counter Case "2": Set Wk(numWeeks) = Range("P1:Q136") ActiveWorkbook.Names.Add Name:="Wk" & numWeeks, RefersTo:=Wk(numWeeks)
I have many more cases and have defined Wk(5) as a Range. What I am really after it is possible to to name the range using something similar to the code above that uses a predefined variable in the naming process.
I have a large file where I want to name about 30 ranges. Initially I had done this using the range addresses and it worked well, but I continue to modify the spreadsheet and add and delete rows, so I need to go back into the code and change the ranges manually. I know there has to be a better way.
What I wanted to try doing was finding some specific text. That text (in all the ranges) is actually one column to the left and 33 rows below where I want to start the named range. Additionally the named range will be a 10 x 33 range. For example, if the data starts in B1, the data to be named will be in B1:K33 and the search title will actually be in A34. Hopefully that's clear...
I was attempting to us the Find function with this code, but I can't seem to figure out how to tell it to look for the text (that would be in A34) and then name the range that would be offset by (-33,1) and then name the entire range.
I have a range which will change in size & in content, & I want this to be a Named Range at whatever size it is.
Reason I want to is because I want to make a Validation List with this dynamic range. I also want a Validation list which lists the content of 2 or more dynamic ranges which may or may not be on the same worksheet - is this possible?
i.e. First dynamic range: called "Milestones" at A11 Second dynamic range: called "Activities" at A25 & make a Validation list that will list content of both
Its fine but if i insert a new row or column then it mucks the whole thing up. Is there away of naming them but if any cells, row or columns are inserted the range will automatically adjust to suit1
I have a column of data that keeps getting new information in it. what i need is a named range that i can use for a chart, first point in the named range will be the first value in the column, second point will be avg. of point 1 and 2, then 3rd point will be avg. of 1,2,3 etc.
I was hoping that then when i go to data > Pivot table and it asks for the range i could put =Data but it tells me that the range is invalid. I have attached a copy at the bottom.
My searches have not produced anything that I could apply to this situation.
I'm trying to write VBA that would:
1. Search a Workbook for Dynamic Ranges.
2. When a Dynamic Range is found the code would:
A. Determine the current coordinates for the range. B. Change the "Refers To" value From "=OFFSET...." To "=Worksheet_Name $Column$Row:$Column$Row"
3. Save Changes.
4. Close File.
My apologies but I have very little experience in writing VBA. I understand about variables, arguments, and IF/THEN but just enough to use functions within Excel.
I have a range of data that will grow as the days of the month pass but I need to run calculations on this range. The data is 13 columns wide but the number of rows will increase daily. I remember using a formula in the Define Range that would automatically take into account new additions using the OFFSET function but cannot for the life of me think how exactly to do it.
Line of code that will Select a Named Range in this case I have Named a CELL "DataSummary" Need to use that named range by selecting 30 columns and 54 rows.
I have been working on part of the code for my spreadsheet and it works fine in the spreadsheet “Databaseform” however when I copied the code to my master spreadsheet “Paul_PartLocDBCombo” it does not work, I get the error:
Method ‘ range’ of object ‘_worksheet’ failed The code is then highlighted in yellow, the code is: Set rng = wksPartsData.Range("a1", Range("a65536").End(xlUp))
Meaning this part is incorrect but I don’t know why? To work it: go to Databaseform and press start. Enter 7mm in the product field and press find all. It will then return all the matching results in the userform. Its this I want to try and achieve on the other spreadsheet when the button find label is pressed.
I have this macro named ABC to bring the name ranges to another worksheet. The name ranges are already saved in the workbook with the below name range. I used "***" so that this formular can go to the last cell that has "***" on A column and it worked untill someone typed "(xxx)" and the range now stops right before the "(xxx)"
I wonder if there is a way to Sum the total of a Dynamic Range so that the summary will be presented in the upper Cell of the summed column?
(please see the attached picture).
The reason is to anable FREEZING of the first row (display the totals all the time even when scrolling down) as the list will get very long after a while.
I am looking to sum a dynamic range and can't quite figure it out. The data expands down rows every week, and I want the sum formula (the final row) at the bottom to include the newly updated rows. I can't dynamically name the numbers to be summed because the dynamic named range will include the sum number and create a circular reference. For example:
5 4 3 2 14
the bottom row (14) is the sum. Next week, my numbers are
5 4 3 2 5 19
I have a macro that will automatically put the sum formula in the correct row and column, but can't quite figure out the formula.
