Need Start Time - Have End Time And Elapsed
May 8, 2014
How to find the elapsed time between two times, but I need the start time in this instance.
Attached is my spreadsheet for a callcenter in which has exported data showing what time the data is exported and how long someone has been their state if they are out of adherence. I have selected fields explaining what I am wanting where on the spreadsheet.
I am wanting to subtract the elapsed time in MM:SS from the End Time which is in HH:MM AM/PM (Imported as text). I do not mind moving these to separate cells to the left to format them correctly, I want to be able to right click in A1, paste, and the rest trickle.
I am having difficulties subtracting the time to get the start time.
Time Conversion (IEX Import).xlsx‎
View 5 Replies
ADVERTISEMENT
Dec 13, 2013
test.xlsx
I need to calculate the time elapsed between start and finish dates. I've figured the TODAY function, as explained here but I'm referring solely to dates in cells. How to?
View 1 Replies
View Related
May 22, 2009
I am not sure that I can do this, but here is what I would like to do. I have a worksheet that I initial when I start a job in on cell and then when I finish in another cell. What I's like is to have a macro running in the back ground that will tell me the total elapsed time from when I started to when I finished.
View 5 Replies
View Related
Jan 25, 2010
I am trying to create a time stamp that shows elapsed time. So I enter my start time, and if I enter any text in cell B7, return the elapsed time in A7 based off of start time in A6. I have attached an example workbook.
View 2 Replies
View Related
Sep 11, 2013
In A1 I have 35 min elapsed time and need to change it to time as a portion of an hour. It reads the 35 min as TIME, therefore I am currently using
=IF(A1>=0.5,A1-0.5,A1)*24. Output is .58, which is perfect.
(output column formatted as a number)
Likewise 3:28 becomes 3.47.
View 1 Replies
View Related
Dec 19, 2008
I have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View 2 Replies
View Related
Mar 3, 2009
I am trying to provide a tool for department leaders to monitor productivity for order processing in their departments. The variables I have are: Number of orders(variable), number of pickers (variable), start time(variable). Then, I know each order takes 1 picker 4 minutes to pick on average, and there are 45 minutes worth of breaks during the picking process. So after entering the variables I used =(((C3*4)/60)/D3) to come up with the time needed to process the orders. What I can't get to is how to add this number to the start time, factor in break minutes and get to the projected completion time. I have Excel 2003 at work. Clearly I need to take a class!
View 4 Replies
View Related
May 5, 2006
I have a user form with textBox1 = start time (entered as "[h]:mm") and text Box2 = finish time (entered as "[h]:mm"). I would like textBox3 to display the difference between the start time and finish time as a general number!
For example
Start time: 21:00
Finish time: 06:30
Hours worked: 9.50
Start time: 12:30
Finish time: 23:00
Hours worked: 10.50
View 9 Replies
View Related
Jun 19, 2014
I have a userform that time stamps on my userform as soon as i open the form, is there a way that when I submit, that the amount of time that I was on the call to be put in my column on my worksheet as minutes?
View 2 Replies
View Related
May 23, 2007
how to include a line of code, to start a sub running at a selected time? Given that the workbook is already opened before that time?
View 6 Replies
View Related
Dec 25, 2007
Can I adapt this code so that users receive the alert if they try and go to the next field without filling in the required ones, or - better - to combine it with a code that does not run a macro, but instead gives the alert, if the required fields have been missed. (I don't require anything to do with printing, this was the closest code I could find)
Private Sub Workbook_BeforePrint(Cancel As Boolean)
If Sheet1. Range("A1").Value = "" Then
MsgBox "Cannot print until required cells have been completed!"
Cancel = True
End If
End Sub
View 4 Replies
View Related
Feb 7, 2014
the vendor has a 21 hr working window; start from 7am and goes until 4am; Mon to Fri.
Here is a scenario:
- i request for a product information from a vendor on 3-Feb-14 8:00am (Monday)
- he replies with all of the product info on 6-Feb-14 12:00pm (Thursday)
can you find the time in above scenario consideration the working window?
Here is another scenario:
- i request for a product information from a vendor on 6-Feb-14 8:00am (Thursday)
- he replies with all of the product info on 11-Feb-14 12:00pm (Tuesday)
- Sat & Sun are days off but keep in mind that my Friday shift ends on sat at 4am so the networdays formula wont work.
View 2 Replies
View Related
Sep 25, 2009
I have a workbook that is generated from the system(AS400)but it wont subtract the time finish -time start. I get a #Value error in the cells I tried two different formulas.
View 2 Replies
View Related
May 3, 2008
This may be a bit vague but here goes.
I have to calculate the difference between the start time and end time of a job. The only catch is, how can I avoid calculating "out of hours" time. So, if a job goes from 9am to 9am the next day, I want it to avoid calculating between the hours of 23:30 and 03:30.
Another example is if a job goes from 02:00 to 04:00, I want it to avoid the tim between 02:00 and 03:00.
If there is a difference in days, so the job goes overnight, how do I take that into consideration also.
View 9 Replies
View Related
Nov 14, 2006
I want to copy and paste a PARTICULAR RANGE from one workbook to another workbook. I want to select the data range from "09:55:00" to "10:00:00" which is in the cells in Column "A" an copy paste it to another workbook. The rows are not constant. The data "09:55:00" to "10:00:00" can e present on any row but is present on the same column i.e "A".
View 2 Replies
View Related
Jul 3, 2009
I am trying to get the number of hours elapsed between these 2 dates and time
6/28/2009 9:14
4/26/2009 8:05
this is the format it is imported as is there a way of getting the number of hours and minutes between the 2 i have tried a number of formats but once it gets beyond 24 hours i can't get the correct result.
View 9 Replies
View Related
Aug 22, 2014
I have a document in which I am trying to determine the length of time between a start date & time and a finish date & time. The format of the time/date cells is
mm/dd/yy hh:mm:ss
Basically, I am just subtracting the first cell from the second. This works fine as long as both dates are in the same day, such as
START FINISH ELAPSED
08/20/14 23:42:22 08/20/14 23:43:59 0:01:37
However, if I have a situation such as
START FINISH
08/18/14 23:00:15 08/19/14 0:03:22
the ELAPSED cell fills with ######## with a tooltip stating that "dates and times that are negative or too large display as ######." The actual result in this example should be 1:03:07.
How do I get consistency amongst my resulting formulas?
View 6 Replies
View Related
Feb 22, 2008
I am trying to determine the amount of off duty time from the last stop time to the next start time. The object is to reset another column of hours (not shown here) to 60 hours only if there has been 34 hours of off duty time prior to the next start time.. I have posted this problem previously but did not explain very well I need to accomplish. The start and end times ( E & F) are formatted as hh:mm AM/PM and the Work time and the other columns are formatted as [hh]:mm. Where my formula fall short is when there are blank days indicating weekends or days off ...
View 9 Replies
View Related
Feb 26, 2007
I am trying to find some simple code that will display elapsed time starting from execution of a macro to a certain point where a message box is displayed at which time the elapsed time should pause awaiting user interaction. Once the user has responded to the message box prompt the timer should continue on from its paused state ceasing at the end of the macro. I would also like the displayed box showing the timer to remain visible displaying minutes and seconds and continuously incrementing even though screen updating is turned off within the macro. (The macro switches sheets a number of times) and the elapsed time box needs to positioned at bottom left of screen.
View 5 Replies
View Related
Aug 12, 2014
I have been currently working with Data in which involves time over 24 hours and I am trying to find the sum of these numbers.
An example would be the following :
4,889:38:33 +4,711:28:37 + 4,851:11:26 .
Of course, I have removed the comma and changed format, this did correct the issue. However, any way to find the sum with the comma still involved.
View 4 Replies
View Related
Dec 3, 2013
I am trying to calculate the time elapsed. I have included a caption to show my formula. The problem I have is that some times are showing > 60 minutes instead of increasing the hour. When my day go over the midnight hour I get a negative number.
View 11 Replies
View Related
Feb 20, 2012
I would like to develop code that does the following:
- I first manually move to a cell
- Press a key combination (CTRL+T for example)
- Press the same key combination, the elapsed time from the first press to the last press is entered into that cell in seconds.
It would be nice if the cell showed the time incrementing live, but that is not required.
View 4 Replies
View Related
Feb 26, 2012
I have a worksheet with checkboxes in each cell in A11:A110 as well as O11:O110. When a checked, the current time appears in the corresponding cell, using this code for example, A11 :
Private Sub CheckBox1_Click()
*
*** Range("A11").Select
*** ActiveCell.FormulaR1C1 = "=NOW()"
*** Range("A11").Select
*** Selection.Copy
*** Selection.PasteSpecial Paste:=xlValues, Operation:=xlNone, SkipBlanks:= _
******* False, Transpose:=False
*** Range("A11").Select
*** Application.CutCopyMode = False
End Sub
This system is used to track time elapsed. Example, the first event of the day begins, so I click the checkbox in A11 and the time appears in A11. When the event ends, I click the checkbox in O11 and the time appears in O11.
Now what I would like to modify is the following:
After clicking A11, if 30 minutes have elapsed and I still have not checked the end time in O11, I would like the whole row to highlight in red, a pop up message box should advise me that 30 minutes have elapsed. I could click OK and remove the message box. The whole row remains in red highlight until I finally check the checkbox in O11.
Obviously I'd copy the code for each row.
I assume the code goes with the checkbox's code for A11? Also, is it possible for a cell to flash? (highlighted white, then red, then white, red, etc...)
View 1 Replies
View Related
May 31, 2012
Setting up a worksheet to monitor bookings within a time range of 06:30 to 09:30 then from 14:00 to 18:00. The data is collected in the following ranges. E3:E25 M3:M25 E29:E60.
I need the data collected from 06:30 to 09:30 - deleted JUST before 14:00 Then need the data deleted again JUST before 06:30 the next day.
View 2 Replies
View Related
Oct 8, 2013
how to find the elapsed time and the amount due.
G
H
I
J
K
L
M
[code].....
View 1 Replies
View Related
Dec 19, 2006
how I can save the elapsed time between when a cell is clicked on? Example: Click on cell A1 to enter a number – three days later click on cell A1 to enter another number. The results would be 72 hours lets say in cell F3.
View 9 Replies
View Related
Mar 4, 2007
I have an assignment to audit the time it takes convert a printing press from one job to the next. I've been using a watch to take the readings in hours, minutes, and seconds.
I recorded them in my spreadsheet, as h:mm:ss, but it showed a date also. I think I finally got that resolved, but now, when I try to subtract one time from another time, I get an incorrect answer. I think I need to convert all of these times into decimals, as in 13.23.44, as oppossed to 13:23:44.
One post on page 1 of my search said to multiple A1*24, but I don't fully understand. I tried that, but 11:30 became 11.50?
I need to extract the set up time, or job to job changover time in a decimal format if possible. There are other tasks being done with those numbers later in the spreadsheet that are more conducive to decimals, than the time format.......
View 3 Replies
View Related
Apr 28, 2008
I'm trying to write an if statement to find the elapsed time. I want it to work so that if a time wasn't recorded, it looks to the previously recorded time to find the time in-between.
Here's what I have so far:
=IF($D18="",($F18-$N17)*1440,IF($N17="",($F18-$L17)*1440,IF($L17="",($F18-$J17)*1440,($F18-$D18)*1440)))
The problem I have when testing this formula is that D18 is not blank, so it should calculate (F18-D18)*1440. But it's not.. it's calculating (F18-N17)*1440. Here's a preview of my spreadsheet.
Sheet1 *ABCDEFGHIJKLMN15Major EventMajor Event Clock TimePUSHPush trashSPREADSpread trashOUT FWDOut of cell fwdREVReverseOUT REVOut of cell revDelayDelay1617************0.000*18**0.00010:03:17 56975643.55710:03:33 0.42710:03:59 0.17610:04:10 0.15610:04:19 ####*19**-1.02810:04:53 0.79910:05:07 0.14210:05:15 0.21110:05:28 ######*####*20**######10:05:38 56975645.84110:05:50 ######*0.19510:06:02 ######*####*21**######*56975646.19510:06:12 0.15410:06:21 ######*0.000*0.000*Spreadsheet FormulasCellFormulaM17=(N17-L17)*1440C18=IF($N17="",($D17-$L17)*1440,($D17-$N17)*1440)E18=IF($D18="",($F18-$N17)*1440,IF($N17="",($F18-$L17)*1440,IF($L17="",($F18-$J17)*1440,($F18-$D18)*1440)))G18=IF($F18="","",($H18-$F18)*1440)I18=IF($H18="",($J18-$F18)*1440,IF($F18="",($J18-$N17)*1440,($J18-$H18)*1440))K18=IF($J18="",($L18-$D18)*1440,IF($D18="",($L18-$N17)*1440,($L18-$J18)*1440))M18=IF($L18="",($N18-$J18)*1440,IF($J18="",($N18-$H18)
View 15 Replies
View Related
Mar 3, 2009
I have four different times on my report, enroute, on scene, clear of scene, in service. I need to make sure that the user's input for each time is < or = the previous time. Also I would like for my time to show in 24 hr format. Do I need to change my clock or can I do it without changing the clock format. users will use the CTRL +SHIFT+: to insert the current time
View 2 Replies
View Related
Feb 6, 2008
I'm not getting that early in the morning
In A1 I've the start time
In B1 I've the end time
in C2 I have a time value ie 6:30 AM
I need a formula IF C1 is between the start time and end time to return the value 1 and if not to return 0
View 2 Replies
View Related
