To Calculate The Difference Between The Start Time And End Time
This may be a bit vague but here goes.
I have to calculate the difference between the start time and end time of a job. The only catch is, how can I avoid calculating "out of hours" time. So, if a job goes from 9am to 9am the next day, I want it to avoid calculating between the hours of 23:30 and 03:30.
Another example is if a job goes from 02:00 to 04:00, I want it to avoid the tim between 02:00 and 03:00.
If there is a difference in days, so the job goes overnight, how do I take that into consideration also.
View Complete Thread with Replies
Sponsored Links:
Related Forum Messages:
Display End Time Automatically Upon Entering Start Time And Time Usage
I have a worksheet which contains START TIME in column A, then TIME USAGE in column B and END TIME in column C. User enters start time, followed by the number of time usage in minutes, how could i possibly display the end time automatically in this scenario? how do you add the entered time usage to the start time to display the end time? Say if I enter 1:00 AM at start time and 00:15 minutes on time usage, how can 1:15 AM be displayed on the end time automatically?
View Replies!
View Related
Copy Range From Start Time To End Time
I want to copy and paste a PARTICULAR RANGE from one workbook to another workbook. I want to select the data range from "09:55:00" to "10:00:00" which is in the cells in Column "A" an copy paste it to another workbook. The rows are not constant. The data "09:55:00" to "10:00:00" can e present on any row but is present on the same column i.e "A".
View Replies!
View Related
End Time To Be Greater Than Start Time
I have four different times on my report, enroute, on scene, clear of scene, in service. I need to make sure that the user's input for each time is < or = the previous time. Also I would like for my time to show in 24 hr format. Do I need to change my clock or can I do it without changing the clock format. users will use the CTRL +SHIFT+: to insert the current time
View Replies!
View Related
Start Time And End Time
ABCDEFGH11-Jun-08123412:30 PM12:32 PMHi GuyI want Date and Time should appear automatically when I entera number in C1 column I have certain conditions I need to capture the start time and end timecan you help me in this For example When I enter a number in C1 column the date must automatically appear in A1 column like wise I need start time must come automatically in D1 column when I move or use tab key to next column E1 the end time should come in E1 colcan you help me in this as shown in the above exampleI need this as soon as possiable
View Replies!
View Related
Calculate Time Difference In Decimal Time
I've got a time difference from 8:00AM - 12:30PM as 4.30 I'm trying to get the minutes, .30, converted into a 6 minute increment, .5. Is it possible to do this and if so how would it be done? Below is a chart of how the time is converted from 6 minutes increments into decimal form. 6 = 0.1 36 = 0.6 12 = 0.2 42 = 0.7 18 = 0.3 48 = 0.8 24 = 0.4 54 = 0.9 30 = 0.5 60 = 1.0
View Replies!
View Related
Calculate Difference Between Two Date/Time
I am currently usins Excel 2007 and would like to calculate the diferrence in hours and minutes (ideally in decimal e.g 4:30 should be reflected as 4.5) between two date and time groups, excluding the non-working time between 17:00 and 09:00, weekends and holidays. An 8 hour working day is to be used. I have attached a spreadsheet were I tried to achieved the above with little success.
View Replies!
View Related
Calculate Time Difference In Various Multiples
I am setting up a time and attendance system. What I want to do is calculate the overtime that someone has worked but in multiples of 15 minutes. Example, if someone worked 20 minutes over they would be paid for 15 minutes overtime. If someone worked 31 minutes over they would be paid 30 minutes overtime. The possible overtime someone could work in one day is 6 hours. I want it to return the overtime in decimal numbers (e.g 0.25 for 15 minutes overtime). I have attached a sample spreadsheet. I would prefer this to be done in VBA if possible?
View Replies!
View Related
Calculate Time Difference Between Two Dates
I have two Rows of data. Each row contains a unique Name column and separate columns for Date, Hour and Minute. I would like to calculate the Time difference in Days, Hours and Minutes between the two Dates. I’m not sure if the way I’ve set it up is the most practical. I’ll attach the spreadsheet to better explain.
View Replies!
View Related
Calculate Time Difference With Constraints
i've two time constraints with 22:00~6:00 and 6:00~22:00. i'll apply time span to two constraints,calculate time covering on two constraints. it will start at anywhere of 00:00~24:00, time span will be 00:00 ~24:00. i add some formula, a3=start time, b3=end time. time constraints with 22:00~06:00: =IF(AND(A3<=22/24,B3>=6/24,A3>B3),8/24,IF(AND(A3<6/24,OR(B3>22/24,AND(B3>0,B3<6/24,A3>B3))),IF(B3>=22/24,(B3-22/24)+A3-6/24,(B3+1-22/24)+MOD(6/24-A3,1)),IF(AND(OR(A3>=22/24,A3<B3,A3=0),B3<=6/24),IF(OR(A3=0,A3=1),B3,IF(A3>B3,B3+1-A3,B3-A3)),IF(AND(A3<=22/24,B3<=6/24),MOD(B3-22/24,1),IF(AND(A3>=6/24,B3<=22/24,A3<B3),0,IF(AND(A3>=22/24,B3>=6/24),(1-A3)+6/24,IF(AND(A3<=22/24,B3>22/24),B3-22/24,6/24-A3))))))) time constraints with 06:00~22:00. :C$3=start time,$B4=end time...............................
View Replies!
View Related
Formula To Calculate The Difference Of Time Between Cells
I'm working in excel2007: I want to write a generic formula to calculate the difference of time between cells, the first being a real data point, such as 6/22/2007 8:53 minus a generic constant term using the same date and a given time, 8:30. So, what I need is something like this: 6/22/2007 8:53 – (same mm/dd/yy @ 8:30) 6/22/2007 12:29 – (same mm/dd/yy @ 8:30) 6/25/2007 11:19 – (same mm/dd/yy @ 8:30)
View Replies!
View Related
Calculate Time Difference That Spans Into Next Day
I'm trying to do some calculations involving times. I'm using the format [=A2+(A1>A2)-A1] in order to calculate times from one day to the next which avoids negative numbers. This is working well. My problem is now that I'm trying to develop my spreadsheet and am trying to embed this inside an IF statement as the [value_If_True]and I get an error because it doesnt like the leading equals sign inside the IF statement.
View Replies!
View Related
Calculate Time Difference Greater That 24 Hours
I have an excel spreadsheet where you enter the start time and end time for job function. Since some of the times cross midnight, I use the formula J3=IF(I3>H3,I3-H3,1+I3-H3) where I is the end time and H is the start time (format hh:mm). This part works fine, however when I sum column J and change my format to Time 37:38:00 (since it is over 24 hrs), it returns a large number of 2234:48:39 which should be closer to 223:00:00.
View Replies!
View Related
Calculate Future Dates From Start Date With Varying Time Period/cycle
I need to determine a formula which will allow me to calculate a future date based upon a current date with varying time periods. For example: I have a bill which is paid on the 15th and last business day of each month. I would like to be able to see the next due date regardless of what day of the week it is. I have a bill which is paid every other Tuesday. I would like to know the next due date without having to enter +14 for every due date in the future. In other words, it is preferable to be able to open the spreadsheet and automatically see the next due date, not use autofill to repeatedly add +14 to a previous date which would limit the # of future due dates that could be calculated. I have a bill which is paid on the last business day of each month, not the last Friday of each month. I would need excel to return a value for the last day of the month which = Monday-Friday, regardless of what day of the week it may be as long as it isn't Saturday or Sunday(holiday exclusion would be nice but not required).
View Replies!
View Related
Add This Number To The Start Time, Factor In Break Minutes And Get To The Projected Completion Time
I am trying to provide a tool for department leaders to monitor productivity for order processing in their departments. The variables I have are: Number of orders(variable), number of pickers (variable), start time(variable). Then, I know each order takes 1 picker 4 minutes to pick on average, and there are 45 minutes worth of breaks during the picking process. So after entering the variables I used =(((C3*4)/60)/D3) to come up with the time needed to process the orders. What I can't get to is how to add this number to the start time, factor in break minutes and get to the projected completion time. I have Excel 2003 at work. Clearly I need to take a class!
View Replies!
View Related
Automate Macro Start On Time & Stop At Later Time
Can I adapt this code so that users receive the alert if they try and go to the next field without filling in the required ones, or - better - to combine it with a code that does not run a macro, but instead gives the alert, if the required fields have been missed. (I don't require anything to do with printing, this was the closest code I could find) Private Sub Workbook_BeforePrint(Cancel As Boolean) If Sheet1. Range("A1").Value = "" Then MsgBox "Cannot print until required cells have been completed!" Cancel = True End If End Sub
View Replies!
View Related
Format Time Difference From Time In Ranges
i want to ask for a reason if a item is late where M & line is the time it should have left and N & line is the actual time it left. TL is the difrence between the two times i want the input box to read " DRIVER DISPATCHED 30 MINUTES LATE PLEASE ENTER REASON" but it returns "DRIVER DISPATCHED -.11233543 E2 MINUTES LATE" how do i format this to show the difrence in minutes TL = Range("N" & Line) - Range("M" & Line) late = InputBox("DRIVER DISPATCHED " & TL & " MINUTES LATE PLEASE ENTER REASON")
View Replies!
View Related
Calculate Start/End Times
Trying to get times worked in hours and mins, from a given start time to a given finished time. I would like H18 to read 14 and H19 to read 13.5 and so on, H23 and H24 are full 24 hour coverage, but i get a 0, when using 08:00 - 08:00 as we only deal with a full or half hours, the figures should read whole numbers or half number as in th example above. Also would like to total all hours worked in H28 to 117 as opposed to the figure given in the attached file. DAY / DATESTARTENDHOURS MON22-May200618:008:00 AM14:00 TUE23-May200617:006:30 AM13:30 WED24-May200617:307:30 AM14:00 THU25-May200618:007:30 AM13:30 FRI26-May200618:008:00 AM14:00 SAT27-May20068:008:00 AM0:00 SUN28-May20068:008:00 AM0:00 TOTAL2.875 Couldnt upload the file as it was 75kbs, a
View Replies!
View Related
Calculate The Number Of Days From Start To End
I have 2 dates a Start Date and an End Date. I need to calculate the number of days from Start to End over eight years with each of the eight years in its own column. Start End Yr1 Yr2 Yr3 11/01/99 11/01/00 11/01/01 10/31/00 10/31/01 10/31/02 Col A Col B Col C Col D Col E 10/31/00 07/05/01 365 117 0 I thought a series of IF statements but I am open to an easy solution...
View Replies!
View Related
Time Difference Using Military Time
I'm trying to calcuate the time difference using military time. For example: A1 has 0400 A2 has 0430 A3 SHOULD be :30 B1 has 1500 B2 has 1715 B3 SHOULD be 2:15 Unfortunately I either keep getting all zero's, or the correct answer but without the ":" in the answer (b3 would look like 215)
View Replies!
View Related
Calculate What Months An Employee Worked By Start And End Date
I am working on a sheet that will allow a user to enter a start month (from a pre-defigned drop down list) and an end month (again from ddl). What I need to calculate is in what months the employee worked in so I can calculate their salary cost by quarter. It can populate other cells in order to do the calculation if needed. So, for example if an employee started in May, and worked until December, I need to calculate that he worked 2 months in Q1, 3 months in Q2, 3 months in Q3, and 0 months in Q4. Our fiscal year is April to March.. ;-) I have thought of several options, but none of them have worked 100%.
View Replies!
View Related
Calculate Processing Time With Fixed Time Paramaters
I am wanting to calculate the the processing time for an order that takes place within normal business hours and workweek. A normal day is from 8:00 to 5:00 If a task is started at 2:00 PM Monday and finished at 10:00 AM Tuesday then the result should be 5 hours as I do not want to include any time outside of normal hours. I can figure out how to subtract dates and times but not how to bridge a day(s). My data is somewhat flexible as I have not started the project yet. I can use separate cells for the times and dates or have two cells that use both incorporate the date and time (8/27/09 2:00 PM) for start and end time or any other idea.
View Replies!
View Related
Calculate Date Differences: Time In & Time Out
I'm trying to devise a formula to produce "days in inventory" based on the following data: Date In Date Out (which may be blank if cargo still here) Todays Date Days in Whse (which is the formula I can't figure out!) It needs to work like this, date out - date in, unless date out is null. If date out is null, the result should be calculated based off of todays date - date in.
View Replies!
View Related
Calculate The Time Between 2 Dates And Time
I need to calculate the time spent replying to my inquiries: I log the time I receive my inquiry as: 06/02/2009 09:23:00 in column A. I log the time I send my reply as: 07/02/2009 07:23 in column B. In column C, I need to put the Formula that will return the following result: 0 days 22.0 hours.
View Replies!
View Related
Time Difference To Be Calculated
Date OutTime OutDate InTime InTime Difference 01-03-099:0001-03-09NIL 02-03-09NIL02-03-09NIL 03-03-09NIL03-03-0910:002 day(s) 1 hours 00 mins 03-03-0911:1503-03-0918:000 day(s) 6 hours 45 mins 04-03-099:00NILNIL 05-03-09NILNILNIL 06-03-09NILNILNIL 07-03-09NIL07-03-0914:453 day(s) 5 hours 45 mi In Column E in want the time difference to be calculated as shown above.
View Replies!
View Related
Difference In Dates For Specified Time
Formula query Column “A” list of dates correspondence in Column “B” list of dates correspondence reply out Need to calculate how many times the difference between date in and reply date is <= 5 in a specific time period. The start date is entered in say, “K1” The end date is entered in say, “L1” Also calculate difference in dates between 14 days and 21 days for time period Also with reply in column “B” not sent until over 28 days. I have tried SUMPRODUCT with (date_in=K1)*(date_out<=L1) for the dates but unsure how to define <=5
View Replies!
View Related
Time Difference In Seconds
Given any two timestamps with the format dd-mmm-yyyy hh:mm:ss AM/PM How to calculate the total time difference in seconds. For e.g. calculate the time difference in seconds for following 07-Nov-2009 00:00:01 AM 06-Nov-2009 11:59:59 PM Answer should be 2.
View Replies!
View Related
Date And Time Difference
I have 2 cells with dd/mm/yy h:mm format. I have been using =TEXT(BQ3-BP3,"[h]:mm") to work out the hours and minutes difference between the 2 cells. However I would like the formula to work so that the hours and minutes difference will only come into effect after midnight on the first day. For example 01/01/06 23:30 - 01/01/06 23:45 would read 00:00 but 01/01/06 23:30 - 01/02/06 00:45 would read 00:45
View Replies!
View Related
#NUM! Message When Getting Time Difference
does anybody knows an idea how to get the time difference without getting the #NUM! error message? Column A contains Start Time while Column B contains end time, if the time in column A is 11:45 PM and the time in column b is 12:15 AM, then I would get this error message...any idea how can i get the time difference without having to use the [hh]:mm format? i would like to use the hh:mm AM/PM format instead.
View Replies!
View Related
Time Difference With Specific Calendar
I am looking to calculate the time difference between 2 date time fields using a specific calendar. I work in an engineering company and am having problems calculating machine utilization efficiencies. Example: Job 1: Start date 06/01/2009 10:00:00 Job 1: End date 06/02/2009 12:00:00 Calendar: Dayshift: Monday - Thursday 07:15:00 - 16:15:00, Friday 07:15:00 - 12:15:00 Nightshift: Monday - Wednesday 21:00:00 - 07:45:00, Thursday 21:00:00 - 05:45:00 Using the specified calendar I am trying to calculate the time difference between the start and end date of job 1.
View Replies!
View Related
Time Difference Ignoring Weekends
provide me a formula to calculate the time difference in format [h]:mm:ss The formula should ignore saturday and sunday. Eg: Fri 31-Aug-07 09:49 Mon 03-Sep-07 19:13 If I take the exact time difference, it is 81:24:37 But it should actually be 33:24:37, excluding 48 hours of weekend.
View Replies!
View Related
Show The Time Difference Between Two Data Entries
I have data entry in a spreadsheet which shows minutes, seconds and thousandths of a second - example looks as follows: 12:48:589 or 04:21:998. I would like to be able show the time difference between two data entries, so for example: 09:57:145 and 08:12:055 would give a difference of 1:45:090 12:07:985 and 18:59:788 would give a difference of 6:51:803 To be honest, I even struggled to work out the values on paper. Is this even possible? If so, can you let me know the number format I should be using as well as the formula or even better, post an excel sheet with the example.
View Replies!
View Related
Subtracting Time (finding The Difference Between Times)
I am having trouble finding the difference between times. I have two cells, A1, A2. Times will be placed in there each day. A1 will have the first time and A2 will have a later time that day. i.e. A1 12:25AM, A2 2:45AM. A3 would have the formula. In this case I am looking for an answer of 2:00 (2hrs). My second issue will be times when I have A1 11:20pm and A2 1:20am. I can't seem to get it to work.
View Replies!
View Related
Time Difference Formula Where Both Times In 1 Cell
I need some IF formula I believe that will yield an answer between 1 - 5. I'm not swavey enough with these things to figure this one out... trust me I tried and it keeps getting more confusing for me. If the time worked is between certain time criteria then it would equal 1 - 5 depending on the time. Example: If I work between the hours of 5am and 1pm then I would be in the Open/Mid range and would need to equal 2. If I only worked a few hours and my hours fell only between the Mid range then it would equal 3. Then based on that... It would automatically fill in on the deployment charts... My name would show up on the Open and Mid Deployments under the task chosen for me to do that day. I've attached a small sample of what I am looking for to kind of help show what I need. The highlighted areas are the areas I'm not sure how to do.
View Replies!
View Related
Converting Time: Subtract Two Times To Get The Difference
I'm trying to subtract two times to get the difference. Entries are in military format (1615) and VBA converts the time to 16:15. My problem is that when a time is entered between 0001 and 0059 (i.e. 0015), the VBA converts the time to :15. My formula does not recognize this, but does recognize 0:15 (entered without VBA). The cell is custom formatted as h:mm. I've tried several other formats including [h]:mm but can't get any to work. How can I get a formula to recognize it? =IF(U12<T12,(U12+1)-T12,U12-T12) where U12 is :15 and T12 is 23:00
View Replies!
View Related
Multiple Condition Time Difference Formula
A person spends some time performing various works (work1, work2...) in a day. Each work can be further divided into tasks (task1, task2...). I need to find the total time spent by the person doing all these activities. The attached spreadsheet will explain it better.
View Replies!
View Related
Display Result Based On Time Difference
I want to make a formula based on 2 times ex: 10:07:00 and 10:09:00. This formula should display "intime" if the diference between both is under 20 minutes, "outime" if the diference is above 20 minutes and it should display "error" if the time is under 0 minutes (this will only happen when someone makes a mistake typing in the time. For example 10:37:00 and 10:36:00)
View Replies!
View Related
|
TRACKER
