I am trying to have the exact same type of text (font, color, boldness, italicizing, underlining, etc) in my target as I have in my source on a character by character basis. The procedure below works for color only. Is there a way I can modify this procedure to include all cell attributes for each character in my target? I looked at the Font properties and couldn't find what I needed. Maybe I need to do it in a totally different way?
For Each cell In source
With cell
target.Characters(i, Len(.Value2)).Font.Color = .Font.Color
i = i + Len(.Value2) + Len(delim)
End With
I have two workbooks (source and target) I want to copy column A in the source workbook to column A in the target workbook and remove duplication in the target workbook. If any.
[Code] .....
Found this in another forum it works for the copy but not the removal of duplication.
i am needing to issue a dos command in excel? basically i need to send a target link to a file. i cant use a hyper link for several reasons, and this is the only way i know how to go about this.
I have main worksheet (target a) that I am trying to populate data from target(worksheet) b. The data I am trying to get from target b changes every month,(declining balance) based on a new month. So how can I get financial data from different cell each month from "b" into same cell in "a"? (so "A" # would be overwritten in same cell based on new # from "B". I have tried VLookup but can't be doing something correct.
I have a list of user attributes which I would like to merge into a template. I have attached a copy of the template and a copy of the user attributes sheet. The attributes have been downloaded directly from a database so there is one attribute per line. For eg 1 user may have 5 cost centres assigned to him. I would like the 5 costs centres to show up under the template. The problem I have is the template is set up for one line per user with multiple fields for cost centres, therefore I need some way of taking the following output.
User Attribute Value 111 CC CA1023 111 CC CA1204 111 CC CA3333
And merging into the following template
User CC1 CC2 CC3 111 CA1023 CA1204 CA3333
Each user has multiple attributes (Cost centre, internal order, etc) I am only worried about the cost centre field for the time being. Also each user may have 0-10 cost centres assigned
I am using a piece of track changes VBA code mentioned on this site, which among other things creates a new column that reports the number of any cell that has been changed (e.g., $K$32). What I would like to do is, next to that cell, report the title of the row in which that cell appears. In other words, if someone changes cell $K$32, for easier reference I'd like others to be able to see that this cell appears in a row titled "New Sales". I'll be happy to clarify with more specifics if need be.
First, to i change the attributes, select the appropriate cell or range and then choose Format, Cells. In the Format Cells dialog box, click the Protection tab and select Locked or Hidden (or both). Unlock cells that accept user input, and lock formula and other cells that should stay unchanged (such as titles). To prevent others from seeing your formulas, lock and hide the formula cells: The results of the formulas will be visible, but the formulas will not.
Now, to protect the worksheet, choose Tools, Protection, Protect Sheet to bring up the Protect Sheet dialog box. but its hideing the formulas. once i protect the cells it wont let me to edit the worsheet (eg- cell height, cell width)
1) What function can I use to replace a specific cell in spreadsheet 2 with what I type in a specific cell in spreadsheet 1 (e.g. type red in spreadsheet 1 in A1 and it will replace a blank cell A1 in spreadsheet 2 with red)? I have around a hundred spreadsheets which I need to name by typing a name in cell A1. Rather than doing this, I already have the names of the spreadsheets in a column.
2) Is there anyway to control the attributes of cells in another spreadsheet? E.g. change to bold, red and specific size font in cell A1 in spreadsheet 2 using cell A1 in spreadsheet 1.
Lets say that you have three cells. The contents of the cells are 1, 2, 3. The contents 1 and 2 have the strikethrough and 3 does not.
How can you perform a lookup from within another cell to find the cell whose content does not have the strike through? (This could also be a search based on finding the cell that does not have the red background etc...)
I'd like to sum up values based on certain cell attributes. Firstly, I don't know if it's possible to define cell attributes and how to do it. Let me put some example:
I have one column where I've put some values and I'd like to sum up the values only for certain cells in this column. In an "OOP approach" I'd use some grouping method based on attributes, so each cell would have an attribute called ID, for example, and I could select only the cell with some desired ID.
I have a list of items in a tab of a workbook that has attributes across the top, with an X in the intersection if the item has that attribute. For example:
Items: Apple Table Paperclip
Attributes: Red Wood Small
The Apple might have an "X" in the intersection of Red and Small, and the Table might only have an "X" in the intsersection with Wood.
I have another tab with five drop downs that can either be blank, or one of the attributes. I want to create a formula that will return the number of items in the list that have an "X" for all the attributes selected in the drop down. Therefore if I selected only "Small" and left the other four blank, the formula might return 2, and if I then select the next drop down and select "Red" the formula would now return 1.
Any thoughts of how I could accomplish this? I am thinking of using a SUMPRODUCT and some sort of Index Match to find the value in the cells selected by the drop down. It seems like Index only returns a row though, and not a column.
I'm helping out a community that puts out a role playing game by making a character sheet for their gaming system. It's normally a pen-and-paper type affair, but a few people have reached out to me and asked me to make it. Now, one thing that I really thought would be nifty would be to make it persistent. I know of the Excel basics, creating basic formulas and the such, but this is where I hit a brick wall.
For the character sheet, they normally have basic attributes on a 1-20 scale. These attributes are accomanied by a bonus. The only thing is those, while these bonuses go across a linear path (For attribute 1, it's -30, for 2 its -20, for 3 its -10, for 4 its -5 for 5 its 0....), I cant seem to figure out how to create some kind of If/Then formula for it....
Heres my example:
Brad makes a character that has a score of 9 for one of his attributes. The bonus given to someone with a 9 is a +10. What I'm looking to do is create a table that sees that 'If (c9)=9, Then (d9)=+10'...
And my second related issue...
Is there any possible way to do the above mentioned formula in relation to a drop down selection bar? It's the same thing here; To break it down simply, It would be excellent if there was a way for it to say If (a10)=Warrior, then (c10)= +10.
I want to do in VBA is to be able to read and place in a variable the image Width and Height of an image in a folder. I can (with help from here) read the filenames in folder. But is there a way in Excel to read the above attibutes?
How to access the full set of attributes of a control when grouped?
I am trying to access the properties of a grouped set of checkboxes (for grouped I mean selected and right click - > Group)
It appears that grouped controls are not accessible through OLEObjects() but they can be accessed as shapes. For example, the following code will set all elements in the group Advertisement2 to .Visibility = False:
For Each T In ActiveSheet.Shapes("Advertisement2").GroupItems T.Visible = True Next However, most other properties, such as .Enabled or .Value are not accessible (probably because the controls are considered shapes). I have tried all sort of solutions, including using .groupItems("ControlName").Value or .groupItems("ControlName").Object.Value
I am trying to take items with multiple market attributes and columnized them so that they can be sorted or filtered.
For example,
Item 110 is suitable for Preteen, Teen, Young Adult, Adult and Senior Item 121 is suitable for Teen and Young Adult Item 250 is suitable for Senior Item 300 is suitable for Young Adult, Adult and Senior
I want to be able to arrange the attributes vertically so that the attributes can be filtered. I'm thinking the easiest way to do it is to duplicate each row as many time as there are attributes and copy each attributes to a single Market column.
My company would receive RFQs from potential customers inquiring the availability of different products, and we are trying to summarise these requests to find a trend.
Each product has several attributes, such as descriptions, keywords, manufacturer's code, etc. The RFQs are all different, with each request providing some attributes while missing others. The only reliably uniform attribute is the product number.
I am trying to build a database with the maximum amount of details on each requested product, therefore consolidating the different requests. I already put the source data on the same sheet and sorted the product numbers. I also know how many instances there are for each product number. In other words, my data look like this:
Product number (sorted) Repeat count Attribute 1 Attribute 2
111a 2 aaaa
[Code] .........
Note: 1. The product numbers and repeat count are reliable 2. All the attributes are valid, i.e. as long as one can fill a blank I would take it 3. If none of the instances provide a certain attribute, it is acceptable for it to be left blank
And I am trying to turn it into this:
Product number (sorted) Repeat count Attribute 1 Attribute 2
111a 2 aaaa bbbb
123456 1 abcde
100x 3 123456 wxyz
I already spent a whole day trying to do it with MATCH, OFFSET, VLOOKUP etc to no avail. It seems I would need some kind of VBS with loop and array functionalities that are beyond me.
I have one workbook which when a macro is run, creates a new workbook. I am trying to then get this new workbook to have both "ReadOnly" and "Hidden" status. but when I use Set attr it only picks up one.
I need to be able to turn of the readonly status and update the file and then re protect it.
Sorry that I'm very new in Excel VBA coder. And, for this topic, I don't even know how to start. I want to make a MS Excel database of a numerous files. This database must be consist of Filename, Location, and it's attribute (let's say updated date, size, hidden status)
I have a report that was created for 2005 that contains two worksheets: a "source data" worksheet and a " pivot table" worksheet. I cleared out the 2005 data in the "source data" worksheet and replaced it with 2006 data...after this I refreshed the Pivot Table and everything seemed fine. When looking at the file size I noticed that it was almost twice its original size....upon further investigation I found that the Pivot Table was internally holding onto the old source data (the "Show" functionality of the rows/columns in the table lists the 2005 row/column headers as well as the 2006 headers....even though no data from 2005 is shown in the Pivot Table).
Does anyone know how to purge the old data from the internal Pivot Table memory?
I hope this is enough information....let me know if you need more.
I want to create a chart that shows "Gap to Target. See attached Sample spreadsheet for more info.
Note how the yellow part of the chart is formulaic...is actually the chart...and the green bar over it is manually pasted. That green bar is supposed to be "result" and that yellow gap is supposed to represent the difference between Targeted sales and the actual Result.
How to actually build the green part into the chart? Every time I try, it just adds them together and doesn't show the gap.
Is it possible to add a value to a target cell without VBA Ie I have 3 worksheets and I would like to pull a varying cell value from each sheet to give me cumulative total on another sheet in a single cell.
I have a simple sub below (CopyData) to copy a cell value (I2) to next unused row in column O. If I run the sub from the VB editor, it runs fine doing exactly what I intend to do.
I've tried several macros to cause this sub to run when the value of cell I2 changes but they all behave the same way. I am initiating worksheet changes using the F9 function key. I2 changes every time I press F9 but the CopyData sub doesn't run.
Below is the latest attempt:
Code: Sub CopyData() Range("I2").Copy Sheets("Calculations").Range("O" & Rows.Count).End(xlUp).Offset(1, 0).PasteSpecial xlPasteValues End Sub
Sub Worksheet_Change(ByVal Target As Range) If Target.Address = "$I$2" Then Call CopyStuff End If End Sub
Im tring to run the procedure called KeyEventsOn ONLY when a single cell in range E29:E30 changes.
The Intersect and Target are borrowed from a book , I dont fully understand how these work. I am assuming that 'Target' should simply reflect the currently selected range, and the 'intersect' function runs a check as to whether the target is in the range to be checked.
The problem Im having is the variable 'Target'. If the above is true, why for example when I type 'ABC' into the current selected cell does the variable 'Target' show as "ABC" and not "$E$29" (or whatever cell is selected)...
